CIF error "Planned order Locked"
Hi,
in the cif queue manager, i had a queue(R3 Inbound) with error " planned order locked", when i reactivated the queue it disappeared.
but what could be the cause of the error. please share your ideas,
Thanks,
Dhanush
Hi Dhanush,
There are multiple causes for this in which you need
to check and fix the exact cause
1) Sequential planning jobs in which one job either in
foreground or background clauses or overlaps with
the other one leading this error.
2) Check SAP note 332881
3) Check in sm12 any user lock or application lock is
found during this time interval
4) Run /sapapo/ccr for planned orders and check
any errors noticed after iteration
5) If you know for a location product in which lock is
observed, then delete the planned order and try
recreating it and check the error whether repeating.
If working good, then you can delete all orders and
regenerate it
Regards
R. Senthil Mareeswaran.
Similar Messages
-
What is the effect of the planned order after it is converted to production
Hello Gurus,
1.There was a planned order with wrong date 2041 instead of 2011
2. plannedorder is already converted to production order and is visble in assignment tab of the production order
3.when I am tryng to display the planned order it gives error planned order is not exists.
4. Production order is already delivered
Now will there be any effect on finanace or any other ,if the planned order was created with wrong date,
can we now change the date of planned order , but it says does not exist as it is already converted to prod order.
Please let me know the implications of wrong date and how we can correct the date from 2041 to 2011
Thanks in Advance
HimakarDear Himakar,
As explained by our forum member,once after the planned order is converted into production order,the entire planned order
details gets deleted from table PLAF and the planned order dates can be changed in the production order and there is no
business impact other than the planned/production/actual dates.
However the planned order no deatils can be checked in the production order.
Regards
Mangalraj.S -
Hi,
This is continuation of my previous [post|No IModel active for cat. Planned Orders]
I am getting the CIF blocks starting with CFIP00... and these are from the program,/SAPAPO/RDMCPPROCESS, that collects and pushes the orders to R/3.
Now the strange thing is I get about 200 of them every day and when I delete the first CIF block, all the queues will be deleted immediately. This is probably the 5 or 6 time in a row. Every time I run this program, I get the blocks. After deleting the first queue, everything else gets cleared immediately.
I checked in the active integration model the material at that plant is in there.X0 maintained, and the planned order in that first queue is not the same material every time!
Any bod has any suggestions?
Thanks.Hi Manish,
I activated the first one and it said running and came back to the same error SYSFAIL.
I checked SLG1, it's the program /SAPAPO/RDMCPPROCESS that was runs at 02:10 AM and that's almost the same time in CIF
queue as well.
I checked SLG1 and there is a log with grey icon (instead of green or red) with
object text:Core Interface Application Log Object and
Subobject text: In-House Production (Inbound)
Program: /SAPAPO/SAPLCIF_GEN
Mode: Batch processing
When I double click, I see no message but when I select the log and click on spectacles icon, here is the text:
===
Identification
Object________________ CIF (Core Interface Application Log Object)
Subobject_____________ IP (In-House Production (Inbound))
External ID___________ IBUP3DO00G}M08002LU2BM
Log number____________ 0000000000019281314
Created:
Date__________________ 08/29/2008
Time__________________ 02:10:00
User__________________ BCKUSR
Transaction code______
Program_______________ /SAPAPO/SAPLCIF_GEN
Operating mode________ B (Batch processing)
Status:
Expiry date___________ 09/05/2008
Keep until expiry_____ Log can be deleted before expiry date
Processing status_____ not specified
=== -
Error while creating a Planned Order
Hi SAP Experts,
I have an error encountered while creating a Planned Order which is "Mode linkage problem with mode number".
Diagnosis:
An application program called an LCA routine and the following error occurred:
An order has at least one condition with mode linkage with the same mode number. The activities of this condition must have compatible modes. The modes are compatible when each mode of one activity has a mode for the other activity with the same mode number. The first activity that violates the condition is given in the return code table in ABAP.
Please enlighthen me what is this error and what should be done to this error.
Thanks in advance,
RaymondCheck the PPM or PDS being used in the Planned Order.
Most likely you have a Setup Activity followed by Produce Activity. However the Mode (i.e. Resource) used in the two activities are different. The same Mode needs to be used both in Setup and corresponding Produce activity.
Hope this helps,
somnath -
Creating a planned order with error "Material requires configuration"
Dear All,
I am facing a problem for creation of a planned order with error "Material requires configuration".
To follow the note 180317, I change Account Assignment Category to "U" (Unknown).
However, the system still does display the same error.
Could you please help provide possible solution for this?
Regards,
PhongSee also the following blog post:
Configurable planned order for material variants: Exception "53: No BOM explosion due to missing configuration"
BR
Caetano -
Error while creating manual planned order in apo
Dear expert
While I am creating manual planned order i am getting error as message /sapapo/rrp251
Every thing is correct BOM and PV's no error after consistency check and it getting succesfully transffered to APO and it is also visible in APO
But while creating manual planned orders planned order are not getting generated I am using BLock planning with PPDS
Please help How to resolve it
Regards
VirenderHi
The error message /SAPAPO/RRP251 - Error occurred while creating order means While creating an order, the system encountered problems, such as, for example, no available components or components that are available late, orders that could not be scheduled, and so on.
I think system attempted to solve the availability problems by using alternative procurement options. This was not successful. The order could not be created. Check the exceptional situations in the planning protocol, under Goto -> Planning log, and deal with the causes of the exceptional situations if this is possible or necessary.
Thanks
Amol -
Error while creating planned order in product view
I am getting following error when I try to create planned order for a product in a Location manually in product view using /SAPAPO/RRP5.
Error occurred while creating order
Message no. /SAPAPO/RRP251
I checked the product and resource. Everything looks good.
Block is available in the resource WMP1_2041_001 for characteristics specified in planned order.
Product master and PDS look good.
In the planning log, I see the following error message.
Plan explosion failed for product LBRA1050-661 in location 2041
Message no. /SAPAPO/RRP718
I have not found SAP notes for above error.
Can you pl let me know what this is due to?
Thanks,
SriniSrini,
The message was created as a result of several notes, such as 1582997. There are others.
The implication is that you have an invalid source somewhere in your BOM. Maybe a bad component part, maybe a bad transportation lane, maybe an invalid BOM, or maybe a bad PPM/PDS.
If you can't find the problem using logical troubleshooting steps, have one of your programmers debug. Have him put breakpoints in FM /SAPAPO/RRP_PLORD_CREATE . If you are particularly lucky, you will find a developer that understands German, because all the internal comments in this FM are in German.
Best regards,
DB49 -
Error while creating Planned order in SAP PP
Hi ,
I am creating planned order for finished material and system has given below error - Please specify the order deadlines in ascending order.
SAP Message Error- Message no. 61009 Please specify the order deadlines in ascending order
Very first planned order get saved and we declare the production and business completed
Now creating second planned order , while saving system giving above error.
I am Taking Planned Order Profile LA -Stock order
Any solution ...?
Thanks in advance !!!
Deepak.Hello Deepak,
Please adjust the order dates in the scheduling of the planned order. In normal production scenario operation completed end of the night shift and order finish date is possibly moved one day in the future for this reason we need to set the operation timing in 24:00:00 format
In your issue change date like this
End date : 30.06.2014
Start : 31.05.2014
Opening date : 31.05.2104
Check with this date, it’s work for you
Regards
Umesh Mali -
Error while mass conversion of Planned order to production order
Hi All,
Thanks in Advance for help. We are facing one issue since Oct-2011.
We have set up batch jobs for early morning to convert planned orders in to production orders. This is set up for transaction COHV.
We have both MTO and MTS scenario.
But problem occurs in Make to Order (MTO) scenario.
Error comes in ST22 as " SAPSQL_ARRAY_INSERT_DUPREC"
*..Reservierungsköpfe inserten
IF NOT rkpf_i[] IS INITIAL.
INSERT rkpf FROM TABLE rkpf_i.
ENDIF.
Note : This error is not coming on consistent basis, it comes randomly. Secondly we are not aware of the reason/root cause of this error, hence not able to replicate error at all on Quality server.(Quality is backup of production till nov-2011)
Writing to SAP, they debugged and provided note 504255. A part of that note says "Remember that this note describes a MODIFICATION which differs from
the standard behavior of the system. Therefore, the customer assumes
the responsibility for the implementation of this source code
change. Due to this reason, SAP AG does not provide any support or
maintenance for the changed source code."
Hence client is reluctant to implement that note.
Can any one help us out on
1) What can be the cause of error as mentioned above?
2) Resolution apart from SAP note?
Best regards,
Ravi DavdaHi Ravi,
I am also facing same kind of issues from past couple of months.
Sometimes this issue come up as sales order credit ststus is not approved and some times it happens due the following error INSERT rkpf FROM TABLE rkpf_i..
I am also looking for some permanent solution.And today I have also faced same error and will be converting it manually.
And can you tell for which client you are working?And if you find any solution for this please update me
Regards
Punjabi -
Error while converting planned order to production order for config materia
Hi experts,
While converting a planned order to production order for a configurable material.I am getting the following error meassage. Message No.CO684,
"You cannot make an assignment to make-to-order stock"
( DiagnosisThe component cannot be allocated to an individual stock because make-to-order production and engineer-to-order production cannot be executed with this order.
A possible cause is that you are trying to create an order with reference to a sales-order/project, where an account assignment to a sales order/project is not allowed in the settlement profile that is assigned to the chosen order type. This is inconsistant.
System ResponseThe following responses are possible:
Order processing is cancelled.
The system resets the special stock indicator back to the original value.
Procedure
Choose another order type).
I have checked some of the threads related to this error. But no where there is any solution.Please tell me if there is any settings to make so as to work on this scenario.
Thanks,
ShamHi,
This will be a MTO scenario. Please check your requirement type,Requirement class and strategy type config along with your Item category and schedule line category from SD.
Also check your Production order type config and settlement profiles.
I mean to say that you need new production order type to be configured for specific above mentioned combination.
Are you working on a production system..?? is it the first time you are creating the order for this config material..??
Regards, -
Configurable material - Error converting plan order to production order CO6
While I am coverting planned order to production order with configurable material, I am getting the follwoing error:
You cannot make an assignment to make-to-order stock
Message no. CO684
As read in previous forum messages I am check settlement profile assigned for new order type (ZSD01) with standard sett profile (SD1) at OKO7 and set "Valid receivers" with value "1" in Order, Material, Profit.segment, Sales order and Order item.
Configurable material have item category group "0002", MRP type "PD", Lot size "EX", Strategy group "25" and "Individual requirements".
Sales order with configurable materiale have item category "TAC".
Where is the problem?
Thank you in advance
OscarHi,
There are some OSS Notes to address this problem..(OSS Note: 311651, 432109 etc..)
But all ae for older versions of SAP.
Regards,
Siva -
Error in Conversion of Planned order to Production Order
Hi,
I am getting error while converting the planned order to Production order.
Error is " Scheduling parameters not defined for the production orders"
I have maintained the parameters in Prod-> Shop Floor Control -> Operations -> Scheduling....but after that also the same error is coming.
And also I have maintained in the Capacity Req Planning
Kindly assist me where I can define the scheduling parameters for the production orders in MTO cycle.
Regards
ToshiHi ,
My production order has been created ....but now m getting error while releasing it.
Its saying that "No checking rule maintained for operation"
I have maintained the checking rule in OPJK. But still m getting the same error.
Kindly assist me for the above error.
Regards
Toshi -
Conversion of planned order to production order resulting into Runtime error
Hello Gurus
I am trying to convert Planned order into production order in MD04, but I am getting ABAP Runtime error; for details please see image here posted.
Please help me to resolve the issue.
Thanks in advance!
# If anybody wants remote access of my system through Team viewer I am ready to share my desktop for same.
Regards!
AKSHAYHi Akshay,
Overflow during arithmetical operation type P COMPUTE_BCD_OVERFLOW comes when the maximum of the internal ABAP field that is 99,999,999,999.99 many be quantity, cost value UoM conversion etc.
Please check how this UOM (unit of measure) is defined in transaction CUNI. In this transaction, you may have set the Value-based commitment indicator. This indicator controls whether commitments for the chosen unit of measure are recorded on a quantity basis or a value basis.
Please search OSS note for this dump and also raise this to OSS.
Regards,
R.Brahmankar -
Sales Order costing error to prevent Plan Order generation in MRP run
Dear PP Experts,
We are into sales order costing due to Variant Config implementation.
Problem Statement: After sales order entry /Characterisitc value selection, while saving sales order , SO costing is auto triggered. Many a times one of the new Raw material price is not maintained( Purchase info record), hence SO costing occurs. SO costing is still saved, SO incompletion is not configured , so it is detected when Production order has 'No Target Cost'. This creates inconsistancy in FI postings.
My questions
- Can we set SO imcompletion for SO costing error( Standard Config?)
- Is there a enhancement to prevent MRP from processing Sales order with incompletion log i.e. Prevent MRP from generating Plan Order.
Best Regards,
JatinHello Jatin
You can use BAdI MD_CHANGE_MRP_DATA to make the sales order not relevant to MRP.
Check the following document for an overview of the BAdIs available on MRP:
BAdIs for MRP
BR
Caetano -
Error in converting Planned Order to Production Order (Urgent)
Hi All,
I am facing an error when i am trying to convert a planned order to production order.
+Error message:
"Assignment order/WBS" is not allowed (WBS L.XXXXXX-XXXX)
Diagnosis:
The current status of object 'WBS L.XXXXXX-XXXX' prohibits business transaction 'Assignment order/WBS'.
Procedure:
To process business transaction 'Assignment order/WBS', you first have to change the status of object 'WBS L.XXXXXX-XXXX' to allow the transaction 'Assignment order/WBS'.+
I have another planned order identical to this one & for that i am not getting this error. So i checked the network for these 2 WBS elements, but could not find anything different in status.
I am unable to figure out what might be causing this error. Hope my problem is clear, await inputs.
VivekHi,
I checked the planned order, the assignment exists. I compared the planned order for which i am not facing any issue in converting to work order & the one for which i am facing the error & i see no difference.
So i am not able to trace what might be the reason. Is there anything which can be deciphered from the Diagnosis & Procedure which i have posted in my initial qns?
Vivek
Maybe you are looking for
-
can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. p
-
I have windows 7 but my firefox has stopped working - help
Depsite being able to connect to the internet I am unable to connect to any web pages. This has only started happening since June 1st & I have not made any updates to Windows or Firefox prior. I note that Firefox no longer works with Windows 2000 or
-
Hi I am reading a string from an instrument in the format hr:min:sec, 0.000, 0.000, 0.000,0.000 I need to separate each part and add it to an excel file. I have triend scan from string and string subset. I am unable to use scan from string as the fir
-
I have spent a lot of time trying to pass arrays of complex numbers between LabVIEW and a DLL I have written in C++, but with no success. The data types I wish to interface with in the C++ are things like std::vector<std::complex<float> > and std::ve
-
Dead-end with EJB3.0 and Sun's Java WebApp
Hi, Wondering if you can help me as I'm a bit stuck with my EJB3.0 remote connection using Sun's Java WebApp9.0 Server. Quick over-view: I have a Client.war file which contains my Servlets and the Remote interfaces for teh EJB and other 'client' clas