CIF from multiple R/3 systems

Hi,
I have the problem when CIF materials from two different R/3 systems. Used customer exit to prefix materials based on BSGs. The issue is that even materials are getting cretaed in MATMAP but some of materials are not getting created in MATKEY. Ther is no error message about missing entries. Does anyone have any idea how to bring those materials in MATKEY so that their material master will be created in APO.
Thanks in advance,
Siir

Hi Siir,
Please check whether the note "557164" is useful for your issue.
Regards,
Siva.

Similar Messages

N:1 replication from multiple ERP source systems on different EHP levels

Hello,
The situation is that the customer has multiple ERP systems on different EHP levels. Therefore, in newer EHP systems, some tables will have different structure (additional columns). The intention is to setup N:1 replication into one target DB schema
Would this be possible to support/setup in SLT ? How would the different table structure be handled?
Thanks and best regards,
Cosmin

Hi Cosmin,
I think this can be achieved. First of all you have to investigate which structures are available for the different releases. At the and the target structure has to consist of all available fields with the same name.
Before oyu start with the replication you have to specify the same target structure for all configuration.
What SLT is doing during the mapping from the source structure to the target structure is a "move-corresponding" command. So it is important that the names of the fields are the same. At the end you will have sometimes fields filled, sometimes not (depending if this field is in the source filled).
Let me know if you need further input.
Best,
Tobias

Material Replication from Multiple R/3 System to SRM

Hi,
Please help me reagrding the below error.....!
I am trying to replicate material from two backend (r/3) systems, i am getting an error (Exception condition "LOGSYS_FOR_GUID_CHANGED" raised.).
Regards,
Nish Kel

Hi
Check the note 765018.
In case of multiple backends and also if systems are refreshed with other instances (client copy), the logical system ID will be changed.
So we need to run the report mentioned in the said note and run the replication.
Rgds
Reddy

Master data from Multiple SAP source systems

Hi Gurus,
In my present project we are having an ECC6 and r/3 from which we need to extract master data.
ex: vendor
same vendor has different entities in the systems.
I am aware of the data inconsistency as it would be overwritten.
We don't want to use MDM,compounding or transfer duplicate records options.
MDM - not in use
Compounding - expensive Option
transfer duplicate records - not reliable
Merging r/3 in to ECC6 is also under consideration but it would be late 2010.
I am sure some of you might have been through this scenario and your help is appreciated and will be rewarded.
Thank you,
Ram.

We went with Compounding option.
Can you justify Expensive ????
We compounded 0LOGSYS,infact you can use 0SOURCESYSTEM.
So that 0SOURCESYSTEM will have the server details.I mean your ECC6 or R3.
or
Some crude solution would be add some character to the beginning of your master data like from ECC 6 append E.
or
Have you heard of Consolidated infoobjects Concept.You can go with that too.
Hope this helps.
Edited by: Praveen G on Oct 1, 2008 9:04 AM

Extended notifications from multiple systems

We're using Extended notifications now to send reminder e-mails about unfinished tasks. The problem now is that we have multiple (3) systems and we would like to set up Extended notifications to send one combined e-mail that has all the tasks from all the three systems. Is this possible with Extended notifications or do we have to cope with sending one e-mail per system?

Hi Evan,
I had the same requirement. My conclusion was that achieving this would mean modifying the standard extended notification mechanism to run in one of your three systems and retrieve workitems from all three systems via RFC calls. Surely quite a big change, with high complexity and high risk.
I finally implemented another (relatively easy solution). The only prerequisite is to have UWL.
1. Write a function module (rfc-enabled) that grabs all dialog and deadline workitems in a certain timeframe (passed as a parameter to the FM), with optional filter on task and agent. It returns a table with all the selected workitems + description + agent + agent's email address (if several agents for a workitem then the workitem appears several times in the table).
Implement that FM in all our SAP prod systems where you have workflows.
2. Write a report in one of the systems, which makes a call to that FM in all the other systems to retrieve the workitem and then sends an email to each agent. The report writes the time at which it runs in a db table. So next time you run it it knows when the email was sent last and thus knows which timeframe to select workitems on.
The report sends one email to each agent with the list of workitems and a link to the UWL.
If you do not have UWL then that might get much more complicated because you'll need to insert links in the email body to allow execution of the workitem from the mail directly. Not easy... In that case I would rather start from the standard extended notification mechanism and enhance it.
Mmmh, maybe I should write a blog about this report of mine. Anyone interested? Worth the effort?
Cheers,
Patrick

How to use a Web Template with queries from multiple BW Systems?

Hi all,
can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
Thanks in advance, best regards
Frank

Great! Thanks for the quick response.
Have you tried this for XMLA datasources created within the EP system also?
i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
Thanks.

CIF blocks with multiple R/3 systems

Hi,
We are in SCM V5 and we have two R/3 systems connected to one APO system. Theya re two different BSGs, with totally different integration models as well.
We are using APO outbound queues for both the R/3 systems.
The question is, does a CIF block from one R/3 system block the order from other R/3 system?
Example:
I have a planned order PO1 created in APO that is bound to go to R/3 system R1. This order is now stuck in SMQ1 in APO.
I create another planned order PO2 that is bound to go to other R/3 system R2 from the same APO system.
Does the PO1 block PO2?? or are they separate?
I would appreciate if you can substantiate that with some reference.
Thanks.
Edited by: Raj G on Nov 5, 2008 8:24 AM

I have not seen such a configuration myself offlate, but based on theoretical knowledge one outbound queue block to one R3 system should not interfere with another outbound queue to another R3 system. The queues are RFC destination specific. INtegration models are also specific to a destination R3 system. However there may be elements that are common - mostly BASIS level settings. Not sure if it interferes with the application.

How to determine receiver from multiple receiver systems

Hi all,
I've scenario :
soap req -> XI -> req to external database -> resoponse from db to XI -> BAPI request -> response from BAPI to XI -> send response to SOAP Response.
In this scenario we have multiple SAP HR Systems. Now external database sends URL field and using that URL field I've to determine which SAP HR system is going to be used to get BAPI response. Each SAP HR system uses the same BAPI structure.
How can I determine particular SAP HR system based on URL field.
I am using BPM for this scenario.
Is there any way I can do this whole scenario without BPM?
Please help me on this issue.
Thank You,
Chintan

Hi Chintan,
Have you tried with the conditional routing with Receiver Determination.
That could probably help you to route to various SAP HR business systems based on the URL field.
For the whole flow you need BPM...but for SAP HR systems receiver determination will be sufficient.
Let me know if you need any more details on it.
also check with below links
Xpath expression
Illustration of Enhanced Receiver Determination - SP16
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
Customise your 'XPATH' Expressions in Receiver Determination
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/content.htm
Hack: Using XPATH in XI Message Mappings
/people/daniel.graversen/blog/2006/12/29/hack-using-xpath-in-xi-message-mappings
Thanks
Swarup
Edited by: Swarup Sawant on Apr 4, 2008 4:40 AM

Pulling/Extracting Data from Multiple SAP Systems - Scripting, ABAP?

Hello All,
I am working as an analyst for a large company that has multiple SAP installations across the world. What I am trying to do is create some global reporting metrics based on data from all of those systems on an ad-hoc basis without having the other units send the data to a central repository. I can receive access to all of the systems but I am unsure how to pull the data. The access to one of the systems I have currently does not allow the use of ABAP or RFC but does allow scripting. If I have a good business case I could ask for ABAP access and RFC as well.
I have researched and read through many posts and articles within the forums but I am yet to find a solution. I have experience in VB, VBA, and MS Access.
Can anyone suggest any ways to move forward?
Thanks!

According to my understanding, you may use vba in your excel or a just vb by programming against rfcsdk(librfc32.dll) or the newly nwrfcsdk, or use jco or nco..., but all these method are based on rfc function call.
You may write a simple abap side data extraction agent, just a function select some table with the data you interest, and then call this function from outside regularly, then you may save the returned table to a csv then bcp to sqlserver(c + batch), or just write to excel sheets(vba).
The simple table read function you may check RFC_READ_TABLE, but it has some limits and are not released. The more functional agent is also can be found from other vendors, eg ms sqlserver2005 kit`s sap adapter...
I do not have idoc or services experience, maybe in that senerio you will find a easier solution.Good luck, you may reach me at <b><REMOVED BY MODERATOR></b>
Message was edited by:
Alvaro Tejada Galindo

BAM report from multiple systems...

Hi guys, just wanted to know if we can actually get the data from multiple systems and then generate a BAM report on those data??.Is it possible? and if so then can anyone show me the way.
many thanks,
Rajesh.

One option is create external data sources, though Oracle recommends that you only use these for data that does not change very much (since it does not go through the ADC, instead must be continually polled). http://docs.oracle.com/cd/E25054_01/dev.1111/e10224/bam_extl_data_sources.htm#CIHJFDAG
Another option is to create a simple BPEL composite that picks up the data from the various systems and sends it to BAM. In general, BAM is more efficient when data is sent to it, not when it has to get the data. (there are also other options including JMS, etc.)

How to manage data aggrigation from multiple systems.

Hi,
How to manage data aggrigaion from multiple system which should support paging too.
please suggest me , best possible soluntion.
Thank You

what is ment by aggrigation? what is the difference between Inheritance and aggrigation ? How can it implement as part of the programm

Not able to fetch workitem from Multiple system ( version 4.6c ) in POWL Configuration

Hi Experts,
i am configuring SAP POWL in my EHP 6 System and i am able to get work-items from same system but i am not able to get from multiple system which version is 4.6c.below steps are already done.
1.Create RFC Destination ( destination working fine )
2.in SPRO,Cross-Application Components ->Processes and Tools for Enterprise Applications -> Inbox -> Assign Connected Back-End Systems to Inbox
Added Destination for Old system 4.6c
3.Create Exception Entry for that
4.Business function FND_IBO_MULTIBE_1 activated
5.Assigned below roles to respective users
SAP_BC_BMT_WFM_INB_API_END_USR
SAP_BC_BMT_WFM_INB_API_SRV_USR
6.Added respective Task IDs in SPRO -> inbox- >Assign Task IDs to POWL Types
Please help if i any config are missing.
Regards,
Pramod Gupta.

Hi Siddharth Rajora,
Thanks will that,but as you said 4.6c is not supported you have any document where its mention like that.so we can show our client and close this issue please share if you have.thanks in advance.
Regards,
Pramod Gupta.

Hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

hi, i want to control my vi from multiple systems using ethernet options can any body tell me how to do that? thans in advance

There are multiple ways of doing this. Here are some of them..
The Web Publishing tool allows you to publish the front panel and you can control the front panel remotely.http://www.ni.com/white-paper/2911/en/
The TCP/IP socket can allow you to pass codes "strings" to another computer. Lookup the server client example.
regards,
Gautham

Calling System.exit() from multiple threads

Hi,
Why would calling System.exit() from multiple threads cause all the threads to block?
Laith

Thanks for your replies.
I made further tests and the problem is actually not as I described it first.
I'm using a shutdown hook that would stop all running threads if the program is stopped externally (using ctl-c for example) (I'm not using Thread.stop(), but setting a boolean value to false that would make the thread exit a while() loop in run()) .
One of the running threads would call System.exit(-1) just before it would exit run().
This thread is getting blocked if it is stopped by the shutdown hook.
I know that this is a bad coding practice, bout would still appreciate an explanation to the reason why the thread is actually blocked by System.exit().
Laith

Same material number Ciffing from different ECC system

Hello Gurus,
I have APO system connected with two ECC system.
If there is a material with the same name in both the system how does the APO system finds the respective system.
Even if I assign BSG for the logical systems, to which system will the transaction data will be transferred after planning?
Thanks,
Siva.

Although I do not have real-time experience working in this kind of scenario from what I understand there will be two product-codes based on the BSG.
Eg. HAMMER@BSG1 will be the Product code for material HAMMER coming from your first ECC system which is mapped to BSG1 and HAMMER@BSG2 will be the product code for material HAMMER comping from the other second ECC system that is mapped to BSG2.
Transaction data will then flow back from APO to respective ECC system based on the BSG mapping. Note in the Distribution Definition you maintain the connected ECC logical system name as well.
Hope this helps.
Thanks,
Somnath

CIF from multiple R/3 systems

Similar Messages

Maybe you are looking for