CIF - Integration model name and APO application

Hi Experts,
In the CFM1 Transaction, there are 3 mandatory inputs are Model name, Logical system and APO application.
Logical systems are customized in CFC1 transaction. I couldn't trace the model name and application creation.
What is the transaction to customize/Create the new Model name and APO application.
Hope this is very simple question to you and expect your soon.
Thanks,
Saravanan V

Hi Somnath,
Thanks for ur reply.
First I saved the selection as variant. But it was not updated in the IM table.
Then I tried to generate the model and now I can see the details when I use the F4 help.
So, to create a integration model need to generate the variant once.
Thanks for the confirmation.
Thanks,
Saravanan V

Similar Messages

  • CIF Integration Model Enhancement

    Guys,
    From ECC to APO, I want to send across all materials which are marked as Procurement Type "E" in the material master's MRP 2 view.
    But standard CIF Integration model does not support to select materials with Procurement Type (in CFM1 Transaction there is no "Procurement Type" selection.)
    Does anybody know how to create the field "Procurement Type" in the integration model, that means how to get an enhanced Integration Model which will contain customised fields.
    Thanks
    Kumar

    It can be done- You can add a new selection option. However I would recommend not to disturb the Original CFM1 Screen.
    Instead write a wrapper program which does the simple query and writes the values in the TVARVC Variables.
    You can use the TVARVC variable in the CFM1 variant.
    So Whenever you run the CFM1 in a batch job
    You would have to run the WRAPPER PRogram as the first step and then the second step would be to run the CFM1.
    Let me know If you need details of the wrapper program.
    Regards
    Kumar

  • BOP selects products without an active ATP CIF integration model ?

    Hello experts,
    while setting up a GATP BOP Process I'm realizing that BOP is not automatically restricting the products from the loaction to which have an active ATP CIF model.
    Example:
    Location: 1000
    Products: A, B, C
    Product A is in APO for DP and SNP reasons and there is no ATP CIF model for A-1000 combination. Products B and C have been setup only for GATP reasons (but not for DP and SNP). If I run the BOP for entire location 1000 (product fiter = empty) it is picking all 3 products including product A and is rescheduling Sales orders for product A in location 1000 - although there is no GATP CIF model active.
    Is this standard behaviour or do I miss anything here ? (I assumed that APO would never take a product into a BOP Filter which does not have an active and standing GATP integration model towards the ECC system.)
    Regards
    Thomas

    Hi Thomas,
    SAP documentation as in below URL
    http://help.sap.com/saphelp_scm70/helpdata/en/9c/066f3928025a6ee10000000a114084/frameset.htm
    states for filtering criteria in its pre-requisite . It appears that it only looks for materials filtered in BOP (i.e it does not look for materials meant for ATP check in its CIF).
    However, let us wait for comments from experts.
    With regards,
    Mrinal

  • More than one CIF integration model possible for material?

    Hi Gurus,
    we want to have two different integration models (with non-overlapping selections) for materials to be able to have separate selections, but we cannot make it work.
    When we create them the first time and then activate them, everything works fine: both models send their products to APO in the initial load. However, if there are changes in products in both models, when we generate and then activate one of the models, the changes in the other one are lost: the generation-activation of the second model does not send any product to APO even if there were any changes in the master data (and we see the ALE pointers as processed in the table)
    Is there any workaround to solve this issue in a system without CIF pointers in BDCP2?? The ECC system is below the relevant releases and will not be upgraded in the near future.
    We could not find any mention to an existing limitation on the number of models being one neither in OSS notes nor the help pages.
    thanks a lot,
    Pablo

    Pablo,
    It is common to have multiple Integration Models for Materials.
    I have never heard of transaction BDCP2.  I also have never seen the problem you describe.
    I usually prefer not to use change pointers at all for Master data, such as Materials.  You can alter this behavior in CFC9, and instead use Business Transfer Events.  This means that all fields that are relevant for 'change transfer' to SCM will move across almost immediately after saving the changed material master.
    http://help.sap.com/saphelp_scm70/helpdata/EN/c8/cece3be9cd4432e10000000a11402f/frameset.htm
    Also read the links contained in this page.
    If you wish to actually perform a new 'initial load', then run the Integration model through program RIMODINI.  It may be a lengthy run.
    As always, check first in your Qual system before committing to production.
    Best Regards,
    DB49

  • Issue with CIF Integration model for Transaction data

    Hi Gurus,
    I have activated the Integration model for PO & PReqs by location wise and i assumed that transaction data is online and we need not to re activate for any new Product / location combination got created in system.
    But the issue is that every time a new material got created, we need to deactivate and activate the integration model for Transaction data to get the transaction data into APO.
    Is there any way to avoid the following exercise as it is taking very long time for activation.
    Please guide me as it is very urgent.
    Thanks for help in advance...
    Thanks & Regards,
    Jagadeesh

    I assume 1,60,000 location products are spread around different locations.
    Rather than one Integration Model it is better to have multiple Integration Models.
    For example: one for each region like North America, one for Europe, one for Asia (assuming you have countries spread across the world). Or create Intgeration Model by Country.
    This way you reduce the number of Products in an Integration Model.
    It is very important to have manageable set of Integration Models. Let me give an example - you have some problem hence the single Material Master Integration Model is down (inactive). At that time any PP or PDS transfer will not have the Header or COmponent products transferred to APO (in effect PDS/PPM cannot be transferred). If you are creating or converting Planned Orders they will not transfer to R/3 (as Header product is not part of active intgeration model).
    But if you have country spefic or region specific Integration Model - only that country is affected not all.
    In fact you should have other integration model (like PDS/PPM, Procurement Relationships, Planned / Production Orders, Sales Orders, Stocks) in same manner i.e. either Country(s) specific or group of countries by region. The risk of models getting inactive or taking too much time to activate after regeneration easily outweighs management of more number of Integration Models (compared to one Global integration model per object).
    Hope this gives you some direction.
    Somnath

  • EWM-ECC  CIF Integration model

    Hello All,
    I want to tansfer data for plant,shipping point,customer and vendor from ERP to EWM.For this I have created Integration model.When I am trying to activate this I could not as I am getting message like'Queue for current initial data transfer is deregistered-Tgt System: APOCLNT800-Deregistered Queue' and hence Inbound queue blocked.
    What could be the reason for this message. How to unblock this Inbound queqe?
    Thanks,
    Shailesh

    Hi  James,
    Thanks. But this error is due to queue 'CFLD*  System is not activating integration model and showing error like this'Operation terminated due to error (queue CFLD*, target system APOCLNT800)'
    In SMQR I could not find this queue to acivate ,I tried in SMQ1/SMQ2, but I could not find this queue.
    Do I need to create this queue? I yes I am unkown T.code for this. Do you have any idea?
    Thanks,
    Shailesh

  • EWM CIF Integration Model master data transfer Issue

    Hi Gurus,
    I am not able to transfer the master data from ERP to EWM.
    When I excecute the transaction CFM1 and CFM2 integration model ,the material is not getting transferred.
    I am getting the below mentioned Error message.
    "Location does not exist for external location 9997, type 1040, and BSG CSSCMDEV"
    Please help me in resolving this issue.
    Regards
    Govind

    Hi,
    Thanks for the reply
    I had created the location 9997 for the location type 1001earlier.
    When I tried to delete the location and create new Location for Location type 1040.System is not allowing me to delete.Please let me know how to delete the existing Location.
    Regards
    Govind

  • How to get all the Model name and Entity name through programmatically

    I am using this code to get Model name
    clientProxy = GetClientProxy(mdsURL);
    ModelMembersGetRequest request = new ModelMembersGetRequest();
    ModelMembersGetResponse response = new ModelMembersGetResponse();
    response=clientProxy.ModelMembersGet(request);
    Model member count i am getting zero
    Error count is 1(required parameter is missing)
    please help me to resolve the issue

    The model/entity/attribute name can be retrieved by MetadataGet.
    You can found some sample code here:
    http://sqlserversamples.codeplex.com/wikipage?title=SQL%20Server%202012%20Master%20Data%20Services%20

  • Rename Model Name and ID using Excel

    Hi everyone,
    after deployed a tabular model in Analysis Services from an Excel file using "Restore from Power Pivot..."
    I connected to the cube with Excel and I could notice that the name of the cube is "Model"
    I would like to change it using Excel. I found only one solution using visual studio, then script the database and modify the text file manually.
    I think it should be a better way.
    Have you any ideas? Any comment will be highly appreciated.
    Kind Regards,

    Paul, is this still an issue?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • CIF: integration model

    Hello,
    I have a net failure some hours ago when I was trying to generate an IM, and now, transaction cfm1 is always displaying the same message for my IM:
    "This model is currently being processed by user "
    I have tried to activate/deactivate the IM (cfm3).
    Any help'

    There was a lock. Deleted with sm12.

  • CIF Integration Model block.

    Good morning
    Our outbound CIF queue in R/3 is being blocked every hour when job
    APO_CIF_ALL_INT_MODELS runs. The error message says "Location
    does not exist for external location 1265"
    Can anyone help?
    Thanks in advance.
    Guy.

    If I look at Transactional RFC (SM58), I have the following error message: -
    /SAPAPO/CIF_PROD_INBOUND      GOLCLNT390    20.12.2007 08:01:57 Location does not exist for external location 1265   0AF00A282EFD476A21336374 gpr3ap1  CFM2 RIMODINI
    location 1265 is a new plant.
    Thanks.

  • Integrating Windows player and my application

    I have created my application which contains a button named pause. Now i am not sure if this is possible.
    When this button is clicked it must pause the currently playing music/video in the Windows Media Player. Also taking into consideration that windows media player is another application i have not used windows media player in my application.

    user10657439 wrote:
    Take a look at this product ..What is your connection with 'this product'?

  • System copy:integration models altered

    Hi SCM experts,
    We have APO 4.1 connected to ECC system.Recently the QAS data is refreshed with PRD data and after that all CIF integration model variants in QAS are pointing to PRD system. There are more than 100 integration model variants and changing the logical system mnaualy to QAS client is taking long time.
    Is there any standrad report or t.code by means of which we can do a mass maintenance of these integration model variants ?

    Hi deeparai,
    You can change the name of logical system in ECC table CIF_IMOD. However, the integration models will not become active unless you generate them again (CFM1/2/3).
    Hope this helps in reducing manual work.
    regards,
    biplab

  • Creating integration model

    I have created an integration model using CFM1 & activated in CFM2.
    now  dont know how to proceed.
    is there any document or link to transfer data from R/3 to APO system.
    i m new to this field & trying by own.
    Thanks in advance.

    Best way of creating CIF integration Model
    Hai,
    Please go through the above thread which can help you for understanding more about the integration models creation.
    You have mentioned that you have done CFM1 and CFM2. Can you please inform for which object you have done and what you would like to see in APO?
    Giving more details would enable helping you better.
    Regards,
    Murali.J

  • RE: DEACTIVATING INTEGRATION MODEL (IM) IN BACKGROUND

    G'day Team,
    The CIF IM's can be deactivated using CFM2 and deactivate logic: click inactive & "Start".
    Does anyone know whether this process can be run in the background using ECC RIMODAC2?
    Points awarded for feedack.
    Andy Gosling
    07792367572

    HI Andy,
    You can use the program RIMODAC2 in background. Create the background  job where there should be two steps.
    1- Activation of IM --RIMODGEN
    2- Deactivation --RIMODAC2 - Put -MODEL --LOGICAL SYSTEM and APO application .
    Regards,
    MJ

Maybe you are looking for