CIF issue :PDS components are not transfering to APO

HI,
i am not getting input components in PDS. only master output compnent available in PDS.
why i am not getting input components in PDS? i checked R/3 PV, BOM , routing....everything fine... everything moved correctly to APO except input components( BOM components)
any setting or config i am missing ??
regards
Rajesh

Hi,
Check the below:
1. FG Materials and all the Component Material to be in APO in a Active Integration Model.
2. BOM & Routing and Production Version setup correctly.
3. The Routing Operations have to Relevant to 'SCHEDULING'.
4. Try deleting the existing Integration model for materials & re-create new IM & activate. (In my case, this have solved the issue)
5. If this still does not work ... if your Integration Model is already Active ... try if recreate the IM for PDS from ECC ... to see if it sends.
Hope this helps.
Regards,
Nawanit

Similar Messages

Call on PRI Line are not transfered to IP-AA on CCM

Greetings,
Having an issue with H.323 Voice gateway. Incoming calls are not transferred to Auto-Attendant. This happens randomly but I have noticed that the frequency is higher when there are no incoming call no PRI lines.
(Check the attachments for debugs)
The calls seems to be answered by gateway but ISDN-Connect message is never displayed. I tried to call from my IP Phone to but no ISDN-Connect message for this call, however, the call is landed on gateway. Running CCM 4.2(3), IPCC Express 4.0(4),IOS version 12.4(8) Advance IP Services, tried IOS 12.4(5a) Advance Enterprise Services as well but in vain.
Another questions is that: we can run both MGCP and H.323 on voice gateway but how will it register with CallManager. I guess we can use some loopback technique for this purpose. Need suggestions/comments!!!
Please find the attachments of Q921 and Q931 debugs. Took debugs for 2-scenarios
1- Called from and outside number to PRI line
2- Called from IP-phone to PRI line
Regards,
Syed Khalid Ali

You can refer this guide for more information on configuring loopback for PRI interface:
http://www.cisco.com/en/US/docs/ios/12_2/dial/configuration/guide/dafchant.html#wp1002838

Components are not visible in personalization

Hi,
In iSupplier Portal, some page components are not visible for buyer address book. (Stack Layout: addressCreateUpdateStack) I even tried to change context, they are still not visible. How I can solve this issue?
Btw, the personalizations are just enable for a standart user. Can this cause the problem?
Edited by: user8627992 on 07.Oca.2011 03:38
Edited by: user8627992 on 07.Oca.2011 03:56

Try
begin
jdr_utils.listcustomizations(FullPathOfPage);
end;
this will give you all the customizations made to the page
for each line returned
try
begin
jdr_utils.printDocument(<linereturnedFromAboveProcedure>);
end;
Regards
Ravi

Components are not displayed in COR6N

Hi experts,
Please help investigate this case:
We confirm process order using COR6N. In goods movement screen, only finished goods is displayed, all of its components are not.
Check material list in COR3, all components are marked "backflush". User could release process order as normal.
Could u suggest anything wrong in master data or process order itself that lead to this issue?
Many thanks,
Duc.

Back flush is ticked means definitely, it will show in Goods movement screen in C011n.
in earlier confirmation if you check the clear resrvation tick in Co11n, hen final issue tick will appear
please check in component overview, final issue is checked or not

Changes to order are not transferred

Hi,
our PPDS users are facing an issue in Product Planning Table ( transaction /sapapo/ppt1).
When we create a planned order and convert to production orders, the system converts with out any issues.
After some time when we drag the production order to a new time ( in DS board), fix the order, then when we save, we get the message " Changes to order 100065265 are not transferred" and the order moves back to where it was... The # 100065265 is our production order in created status.
Looking at the error details, I thought there are some changes to the order being done in R/3, but there were no changes to that order in R/3 at that point and the same change, if done after some time goes through...
This is happening almost for every order and it's annoying to keep click ok on this order, wait and then reprocess again...some time we get the error multiple time before the system accepts the changes...
Any idea on what might be happening?
More details about the error,
===
Changes to order 100065265 are not transferred
Message no. /sapapo/cdpssimulati015
Diagnosis:
The changes made to the order 100065265 in SAP APO can not be transferred as the order has already been changed by the linked R/3 system
System Response:
If you have made minor changes to an order in SAP APO and changes to this order are simultaneously being transferred from the R/3 system, only the changes from the R/3 system are adopted. The changes you made to the order manually in SAP APO are lost
In technical information, I see the application area as /SAPAPO/SIMULATI, MESSAGE # 015 and main program SAPLSHL2.
Thanks,K

Hi,
It seems the production order details are getting updated in ECC with order related settings you maintained at ECC, like settlement profile, etc., During that time, if you try to change the production order in APO, since the ECC update for the order is not yet completed, it gives the error. Thats why after sometime, when you change the production order, it allows you to change.
Please try this, once you convert the order in APO, go to ECC and try to open the order in CO02 or CO03, it will give you an error the order is already being processed by XXXX. If so, then it is the time taking to update the production order in ECC.
Also, try this, once you convert the order, immediately save and after sometime you change the time.
Please check and revert.
Regards,
Manimaran M.

SRM PO Changes are not transferred to Back end

Hi All,
I have a problem in PO changes.
We are using extended classic scenario. User create PO in the portal and the PO will be transferred to the back end R/3 via RFC. Earlier in 4.7 we the PO's are updated with the changes.
Recently we have upgraded to ECC 6.0. Now the changes are not transferable.
Could any one help me to fix this issue and please give the steps that i need to check for fixing it.
Regards
Pratap J

Hi Thaigo,
Thanks for your input. please go through the below.
These are the table entries in BBP_BACKEND_DEST
Client Logical system Destination                        System type RFC possible Local FI validation
500    EP1CLNT500     EP1CLNT500                         EBP_5.0                  X      0
500    RP1CLN500D     RP1CLNT500DIAG                     R/3_4.70    X                   0
500    RP1CLNT500     RP1CLNT500                         R/3_4.70    X                   0
In the table, it was still 4.70. So it needs to changed to ERP_4.0 ?
Regards
Pratap J

SOLUTION MANAGER - VAR Scenario - Attributes are not transfered

Hi Solman Gurus
I have an issue regarding connection between Customer and VAR solman.
IThe connection is established following document How To Setup ServiceDesk 2 ServiceDesk Connection Nov 09.pdf.
The problem is in VAR Solman.
When message is transfered from Customer solman to VAR solman the following attributes are not transfered:
Sold-to party, Reported by, Support Team, Message Processor.
The Ibase is configured in both systems. When message is posted from satelite to Customer Solman all this attributes
are transfered. In the next steep, when message is transfered from Customer solman to VAR solman this attributes remain
empty in VAR Solman.
What confugration is missing in VAR Solman?
Thank you in advance
Marko

Hello Marko,
How did you define the value mapping? Automatically or manually?
Have you checked that Incoming and outgoing value mapping has been created in both systems?
Are you copying the values or taking an other action?
Could there be a rule that is setting the value to space?
I'd take a closer look at your value mapping and make sure incomming and outgoing have been defined properly on each system and make sure the rule is correct, and its not taking some unexpected action like set the value to blank when you wanted to copy it.
Regards,
Paul

I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

HT204053 I have a problem. I bought Pages and Numbers for my iMac and so far everything was OK. Suddenly i have a problem with connection to iCloud. Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded in iCloud.

I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….

I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!

Free of charge items, ie price = u00A30.00 are not transferred to backend.

Free of charge items, ie price = £0.00 are not transferred to backend. PO created with held status, but the SRM PO item IR flag is selected. If we manually amend the SRM PO item to remove the 'invoice receipt' flag, then save the PO, the PO does get to the backend with a price of zero, the IR flag de-selected and the 'free' item flag selected.
How do we manage to get the PO with free items to the backend without having to manually change the held PO in SRM? We are on SRM 5.0 using extended classic.

Hi
We have done this type of requirment.. several times.. This is easily possible ..
You need to Implement the BADI - BBP_CREATE_PO_BACK using SE18 Transaction.
Either you can do this sample code inside BAPI (Make changes accordingly) or inside the BADI - BBP_CREATE_PO_BACK / BBP_CREATE_PO_BACK_NEW depending on your requirement.
LOOP AT po_items INTO ls_po_items WHERE net_price IS INITIAL.
* Reset the IR Indicator for Items with Zero net price
 ls_po_items_add_data-po_item = ls_po_items-po_item.
 ls_po_items_add_data-ir_ind = space.
 ls_po_items_add_data-gr_ind = 'X'.
 ls_po_items_add_data-gr_non_val = 'X'.
 APPEND ls_po_items_add_data TO po_items_add_data.
ENDLOOP.
Related link ->
Re: Final Entry/ Final Invoice Indicator to be checked Auotmatically
Do let me know.
Regards
- Atul

When I take photos with my ipad 3 the photos do not go to photostream anymore...they just go to the camera roll so they are not transferring to my pc

When I take photos now with my ipad 3 the photos do not go to the photostream folder...they go to the camera roll so they are not transferring to my pc although they were up till today. How can I fix this?

I went there and the problem might be because of low battery power..I am charging my ipad now and will let you know if that has helped...Thanks for the link..

Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely

Hi everybody !
I have a strange problem with SOAP deserialization in flex 3.2, and I thought this forum will be the best place to get answers ...
When I try to fetch some objects (like the ones shown below), the XMLDecoder does not deserialize all the properties.
In this case, it stops at the property named "rating". After it, all other data are lost.
I've used the flex builder debugger to locate the problem, and this lead me to the following method in the XMLDecoder class :
getApplicableValues(parent:*, valueElements:XMLList, name:QName,context:DecodingContext, maxOccurs:uint):XMLList:
State of the variables, before the "bug" :
The strange behavior appears after the five first properties had been deserialized correctly.
At this step : startIndex = 5, and the next property to unmarshall is "user" (according to the MExpertNotes object mapping)
the valueElement's list contains the following elements :
to simplify the notation, I will write only the position in the list and the xml tag name (see the complete soap response for more details at the end of this post)
(position, fieldName)
(0, ID) -> inherited from MotocycletteObjectImpl
(1,comment)
(2, noteValidation) (a Bean, never returned by our service -> set to null)
(3,noteValidationID)
(4,rating)
(5,timeOfCreation) -> inherited from MotocycletteObjectImpl
(6,user) (a Bean, never returned by our service -> set to null)
(7,userExpert) (a Bean, never returned by our service -> set to null)
(8,userExpertID)
(9,userID)
(10,version) -> inherited from MotocycletteObjectImpl
when it enters the for loop, at the first iteration the valueElements[i].name is equals to "timeOfCreation" and the name parameter is equal to "user".
so this test : if (name == null || valueElements[i].name() == name
|| ((name.uri == "" || name.uri == null)
&& name.localName == valueElements[i].name().localName))
returns false. The skipAhead variable is set to false (and i don't understand why). It stops iterating over the valueElementList, and so, skips all other properties.
Is this a bug ? Does a workaround exists ?
This affects many of our objects.
Any help would be greatly appreciated.
Best regards,
Jules Pajot
R&D engineer for Mikros Image
www.mikrosimage.fr
[EDIT] : My Message was too long, so I put the complete message here :
http://docs.google.com/View?docid=dd6j35ft_38grb9c7cr
PS : I apologize for my english wich is far from perfect :)
As a reminder , the XMLDecoder class method ( line 2204 ):

<div class=Section1> color:#1F497D'>The holidays are starting here. The experts in the area may already be away. Please file a bug. It might help if you can simplify your test case to use an XML file that is local so we don’t need your server connection.<o:p></o:p> color:#1F497D'><o:p> </o:p> <div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'> From:<span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Jules Pajot [mailto:[email protected]] Sent: Tuesday, December 23, 2008 9:05 AM To: [email protected] Subject: Re: Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely<o:p></o:p> </div> <o:p> </o:p> A new message was posted by Jules Pajot in Developers -- Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely Nobody has an idea about my problem ? <o:p></o:p> <div class=MsoNormal> <hr size=2 width=200 style='width:150.0pt' align=left> </div> View/reply at <a href="http://www.adobeforums.com/webx?13@@.59b74f93/0">Flex SDK 3.2 : Unmarshalling issue : SOAP objects are not deserialized completely</a> Replies by email are OK. Use the <a href="http://www.adobeforums.com/webx?280@@.59b74f93!folder=.3c060fa3">unsubscribe</a> form to cancel your email subscription.<o:p></o:p> </div>

Files Are Not Transferring Correctly from Captivate 4 to 5

My files from Captivate 4 are not transferring correctly into Captivate 5. The images and quiz questions are not in the same place. Help!

This is a bug.
We all have it.
Keep CP4 for the old courses, and develop new ones in CP5. That is what I am doing.
Alternative is to manually adjust everything (don't even get me started on rollovers...)
Terry

Messages are not transferring from PI to SRM

Hi,
Here the land scape is ECC -PI-SRM, The messages transfer to ECC TO PI, But messages not transfer from PI-SRM ,the scenarios are Idoc-idoc & Idoc -proxy ,Here all RFC connections are working fine, . In SRM side - T-code sldcheck getting the error - function call returned exception code 3, and in SPROXY T-CODE - ESR components are not displaying, could please provide help .
Regards,
seetharam.

Hi M Joshi ,
Please check the below :
1) One RFC of type H to point to PI with all the details.
2) Define the role of the business system in the server that you want to see(Sxmb_Adm)
3)Connection between Business System and System Landscape Directory.
3a)RFC destination LCRSAPRFC of type T for SLD connection.
3b)RFC destination SAPSLDAPI of type T for SLD connection.
4)Maintain the SAP J2EE Connection parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE Engine
5)Maintain SLD access details in Transaction SLDAPICUST.
Please refer the section 1.3.1, 1.3.2, 1.3.3 and 1.3.4 in the document(as linked provided below)
SLDAPICUST should point to the SLD host server. If you have a central SLD installed on the Dev server, then it is ok that it is using the host and port of the Dev server.
PIAPPLUSER is the normal user that is used in trx SLDAPICUST (the user must have the role SAP_XI_APPL_SERV_USER).
'Lastly, will the gateway Server of SAPSLDAPI and LCRSAPRFC will be the same for both DEV and QAs systems in XI?'
For proxy configuration, refer the following link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?QuickLink=index&overridelayout=true
you can also check the assignment between the Business System , technical system and the software component versions in the SLD.A object would only be visible in the SPROXY of an Applicaion system if the corresponding SCWV is installed on the business system.
To add :
Go to the landscape view in the SLD.
Select the Technical System Link
Search your Technical system as Application system
Click on the same
A tabbed screen appears in the bottom.
Go to installed software tab.
Click ADD NEW PRODUCT
Add your product here.
Also check the business System assignment in the similar way.

When douwnloading adobe premier pro fails. Writes that the installation is complete, some optional components are not installed correctly. What to do?

When downloading Adobe Premier pro fails, write that the installation is complete, some optional components are not installed correctly. What to do?

check your install logs for the problem, http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

CIF issue :PDS components are not transfering to APO

Similar Messages

Maybe you are looking for