CIF problem for kmat material

Hello,
I am getting following error message ---
' NO configuration for CONFIGURABLE PPDS-PDS DESKTOP_01' while doing CFM2 transction.
I am working with KMAT ,material with PDS.
kmat material is DESKTOP_01.
We are constructing this scenario.
Please let me know the solution.
Regards,
Ravindra

Hello Uma Maheshwar,
Thank you for your answer.
I have not done the configuration specified by you.
I will do the same.
Please let me know ,
If I am using two classes,
class 300 for parent kmat material and class 001 for the child materials.
Please let me know how can we do the CIF ?
What care must be taken by the doing the cif for materials.
Waiting for your reply.
Regards,
Ravindra

Similar Messages

How to look for kMAT material in Testing client?

Hi PP members:
How to look for KMAT material in Test client,
Note: I went to mm60 and entered material type: KMAT it did not populate any
materials
Is there any way where I can find the materials, If yes please let me know
thanks
Suren

Hi Saritha:
When I went to SE16, and entered MTART as KMAT it giving the following
It is replying me back "No table entries found for specified key"
Also want to bring to your kind attention I left MATNR field blank as I donot know
the VC materials
thanks

Why there iare no accounting views for KMAT material ?

Hello PP members
Why there are no accounting views for KMAT material, in a Standard SAP sytem
Is is because KMAT material cannot be valuated
Please clarify

Baskaran, PP consultant, Rajesha:
Thank you for replies
Round Robin of discussions
Valuation is done at quantity / value level (KMAT - No valuation is done at either Qty/value level)
KMAT is neither valuated or stocked for that plant when GR is done, the only thing it will do update the sales order
As KMAT is configurable material, the system calcuates the material cost dynamically as per the customer selection
Accouting view is used to select the correct G/L account during stock postings
The above can be viewed in OMS2
Due points have been assigned

Automatic PR generation Problem for a material..???

hiii Experts
Can anybody give some your suggestion and idea trouble shoot this problem by your valuable knowledge and by ur exeperience..
Here my problem. For one material ( ROH ), every month automatically around 20 to 25 PR's are generating .
How to locate the problem and rectify the same . what might be cause for this issue.
THis are all the details we have maintained in material master
For one material assume XXXX,
Material type - ROH,
In master , MRP - PD
MRP controller- ABC.
Thanks
SAP-MM

hi
Correct wht u have said..
But wht i m asking , system why should it generate Auto PR for 1 kg, 0.5 kg, for 5 kgs ..
Becas there is no production order also for this quanities .
If we maintain in MRP view as PD.. it should generate as per requirement only.
So kindly explaibn me clearly wht might be the problem , and how to locate it..
Wht is procedures for MRP run based on MRP type in material master..
Thanks
SAP-MM

Subcontracting for KMAT material (VC)

Hi Guru's,
Can anybody let me know what is the process/config/steps that needs to be done for creating a subcontracting order for the below scenario ?
We get sales order for a KMAT Material based on the customer configuration. We have Super BOM's. Based on the configuration, the system selects the BOM components. The finished product will be manufactured by the subcontracting vendor. We have to pass the component list (Selected component list for that specific configuration) to the subcontracting vendor through a sub contracting PO, how do we do that ?
thanks,

Hi,
I think its not possible (i'm not sure), pls ref my thread ..
Edited by: Jayakumar Raju A.S on Aug 11, 2009 7:15 PM

How to find Materials Variants for KMAT material

How can I find what are material variants for a given KMAT material, Is there a specific table or
transaction code from which I can find

Hi
In T-code CU44 you can find all the material variants for the K-mat
Regards
Brahmaji

Wrong Register Updation for consumable material

Hello Gurus,
I am getting problem for consumable material for which excise duty is applicable. Normally after making GR for these type of material RG23A Part I and RG23A part II registers should get updated but I am facing problem that for these material currently RG23C register is getting updated.
Kindly help me to resolve this issue.
Warm Regards
Kishor Hole

Hello, I have already checked this scenario with material code and without material code. I am taking care of Material type in J1ID and it is consumable only. Also at the time of GR in Excise Item tab I am verifying for material type and chapter id but it is still updating to RG23C register.
Please help me out for the solution
Warm Regards
Kishor Hole

Costing Run for Configurable Material

Hi,
When I try to run costing run CK40N for KMAT material, I am geting information "No materials selected" for the 'selection' flow-step.
Below is the Error description.
No materials selected
Message no. CK277
Diagnosis
Due to the costing variant used, no materials could be selected for the cost estimate.
System Response
No materials were selected.
Procedure
1. First, check that the materials you want to cost exist.
2. Then go into Customizing and check the costing variant, the reference variant, and the transfer control. If the plant changes, a suitable transfer strategy must be entered in the transfer control belonging to the reference variant.
Thanks in Advance,
Shiva

hi Shiva,
It is not possible to do the cost calculation for configurable materials in CK40N or CK11N.
To do the product costing it is mainly required the BOM and Routing, but in case of configurable materials the BOM and Routing are not fixed(here Super BOM/Super Routing are used with valid object dependencies which may result in "n" number of material variants)
To do the costing for configurable material you can use t code - CU50 (configuration simulation)
Here in CU50 you can select the characteristics values which ultimately selects the valid BOM and Routing required for variant production and do the costing and check.
Please check
http://help.sap.com/saphelp_erp60_sp/helpdata/EN/7e/cb857b43a311d189ee0000e81ddfac/content.htm
Pavan
Edited by: Pavanakumar on Jun 29, 2009 4:34 PM

Problem with Revision level for a Material

Hi All,
I have a problem with Revision Levels for a Material.
I want to know the Revision Level for a particular Material for BOM Creation.
Can anyone please let me know from which Table or Funtion Module can I get the Rev Level, once I pass MATNR (Material) and AENNR (Change Number).
<REMOVED BY MODERATOR>
Thanks and Regards,
Harish Kalla
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

HI,
You can use table AEOI.
Hope this helps.
<REMOVED BY MODERATOR>
Regards,
Sipra
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 4:30 PM

Sales order costing for Configured Material (Material Variant Not KMAT Mat)

Hi All
For a Configured Material (Variant) (Not KMAT Material), which is having Std price costed.
But if we create a Sales Order for the Configured Material, what options are availale to Execute Sales order costing and take the sales order value to COGS during Delivery.
The reason being Client wants to Cost BOM items are price which is different from the Price used in Std cost estimate due to Price Volatility.
I can understand we can do this in KMAT, but not sure how to do in Conifgured material. We can execute sales order costing and get Statistical cost value in EK02/EK01, but how to get this value posted during PGI..?
Thanks
Aravind

Hi Ajay
Even if i maintain M in Valuation filed, my Material Variant HALB material is already having standard cost in its material master and it is picking the std cost during PGI Delivery and hitting COGS A/c.
Now how to get my sales order costing to real and post my sales order costing value to GI..this is the client requirement.
Due some complication KMAT is not used and logistics go with Material Variant

How to find a KMAT material, for a given class (class type:300)

I know the class (class type:300), but I would like to know for which KMAT material is this class is being used. Is there a transaction or table for which I can find

Hi
Try the tables KSSK,KLAH. Pass the class value as 300 you wil get all the materials which are assigned to class type 300. you can pass the material to MARA to and filter with material type KMAT.
Regards
S.Senthil

Problem of Booking of GRN for LOT Material

Dear Expert,
In project huge materials we are receiving in LOT, and we can not book GRN until lot is completed . Lot completion duration is vary case to case basis ie 15 days to one year also , and due to this every month we are facing Audit observation of GRN delays.
Please help to avoid or overcome to this problem of Booking of GRN for LOT Material like other material ,without waiting for lot completions.
Regards
Tanmoy_mm.

Try like this,In material master,maintain base unit as 'PCS' or 'EA',purchasing UOM as for example 'LOT',if there is
standard conversion maintain conversion factor in additional data tab.For example 1 pc = 0.001 Lot.
Do goods receipt,for example 250 pc you receieved means,you have received 0.25 Lot.
Edited by: Jeyakanthan A on Feb 17, 2011 10:57 PM

Problem with an enter inventory count for a material with serial number

Hi all,
I must post an Enter inventory count with the transaction MI04 for a material with serial number that it has more 250,000 of serial number, but the system give an error message of dump.
Are there any alternatives to post the inventory document?
Thanks.
Best regards,
Gaetano

you can't but uplaod using LSMW rather entering manually otherwise you need coremod

Error message while creating production order with KMAT material strategy25

Hi PP Gurus I am running variant configuration cycle...Strategy 25, Custermer Req KEK (KMAT Matrl)
Sales order & MRP Picked the components correctly as per the dependencies
written. So Planned order generated against sale order.
When I tried to convert planned order to Production order...I am getting the
below error message..
Error Message:
You cannot make an assignment to make-to-order stock Message no. CO684
Diagnosis The component cannot be allocated to an individual stock because
make-to-order production and engineer-to-order production cannot be executed
with this order.
A possible cause is that you are trying to create an order with reference to a
sales-order/project, where an account assignment to a sales order/project is not
allowed in the settlement profile that is assigned to the chosen order type.
This is inconsistant.
System response The following responses are possible:
Order processing is cancelled.
The system resets the special stock indicator back to the original value.
Procedure Choose another order type.
I used order type with SD1 as settelement profile.
OVZG: default 046, settlement profile = SD1
OPJH: Settlement profile = SD1
Plz through some light on this if u have worked on Variant Configuration/MTO
settlements.
Question:
1) Is creation of production order with KMAT material supported by SAP?
2) If yes, why the above error occurs?
Waiting for Ur reply
With Best Regards

Dear R.Brahmankar,
I have check on the note, but it is not relevant to ecc6. The current system default setting is :
Standrad setting for reqt class 046
Special Stock E
Acct Assgt Cat. M
Valuation M
Settlmt Profile SD1
However if I change the Acct Assgt Cat. from M to E. It resolve the problem. I would like to know is this the right solution?
Config in Acct Assgt M
Consumption Posting = E
Config in Acct Assgt E
Consumption Posting = ' '
In F1 key of Consumption Posting field it shown following:
To flag the sales order item as cost- and revenue-carrying, enter an "E" (settlement via sales order).
If you do not wish to flag the sales order item as cost- and revenue-carrying, do not enter anything.
Dependencies
If you are working with nonvaluated sales order stock, always flag the sales order item as cost- and revenue-carrying.
If you are working with valuated sales order stock:
In the case of complex make-to-order production, flag the sales order item as cost- and revenue-carrying
In the case of sales-order-related mass production, do not flag the sales order item as cost- and revenue-carrying
Should we change to E?
Regards,
Ong

Make-to-order: COPS for KMAT materials (Non-valuated sales stock)

Hello,
We are working with KMAT configurable material (i.e. non valuated sales order stock).
The client is requiring that inventory of these KMAT material should be shown in the financial accounting;however as we work with KMAT, this seems not possible.
The whole process is:
- taking of the sales order with the configuration
- MRP and Production order Execution
- Settlement of the PO to the sales order
- Settlement of the Sales orden to a given account in FI (just like "stock for customer order") - inventory.
The problem we are facing now is how to make the compensation of this account once the product is delivered.
It seems the sales order's default settlement receiver is only the PSG. can we have to use the result analysis key to calculate the cost of sales, and which valuation method can we use if I only want to settle the actual cost that settled from the production order.
By the way, I have search for the notes:Note 26459 it seems we have to run the sales cost estimate first for the KMAT.
Summary
Symptom
It is not possible to perform results analysis on sales order items with materials of material type KMAT.
Additional key words
Transactions KKA3, KKAK
Cause and prerequisites
In make-to-order production, the inventory and the cost of sales are not posted through goods movements because the materials are managed in a non-valuated sales order stock. The only way to create postings in FI is to use results analysis (see Note 26456). If the sales order item consists of a material of material type KMAT, results analysis is not possible because no cost estimate exists for this material.
Solution
Results analysis must be performed with a valuation method that uses profit basis C. With this profit basis, the system uses the planned costs of the production orders for the sales order instead of a cost estimate for the KMAT material.
In Release 2.2 a modification is needed for this which is described in Note 25772. In Release 3.0 this function is provided as standard.
From 3.0C onwards the planned costs of the sales order can also be calculated in a product cost estimate for the sales order. You should use profit basis E in this case.
However, if you are using assembly processing with production orders, you can only use profit basis C.
Hope the scenario is clear. Perhaps you have a different approach to work with KMAT materials.
Regards

Hi Friends,
Can you please provide the solution for my problem and its slight urgent.
Regards
Goutham

CIF problem for kmat material

Similar Messages

Maybe you are looking for