CIF queue monitoring and alerting

Hi Gurus,
Is there any way we can have automatic monitoring of number of CIF queues .i.e if the CIF queues goes beyond a certain number, then I should get an email alert.
Or if I can get the alert configuration for number of entries in SMQ1 or SMQ2, it'll be great.
Thanks in advance ...
Regards,
Surendra

Hi Surendra,
I believe your APO Basis team might have an answer for the question.
And in case you are talking about the post processing errors, you can use the transaction/SAPAPO/CPPA. Even using this, will not tell you the number of post processing queues, but, its capable to telling you the number of users that initiated the queues. This transaction is capable of sending an email and by varying settings, it sends the number of messages equal to number of initiators of the queues.
Else, as already suggested, writing a report would be the option.
Cheers,
KC.

Similar Messages

  • Infrastructure Navigator 1.2 monitoring and alerting

    I was under the impression that Infrastructure Navigator did monitoring and alerting of services and applications where if something stopped working or had issues it can notify you via something like email or SMS etc. From what I have seen it appears that it only shows you what services are running on a VM and the dependencies it has with other servers. Is that the case or am I missing something?

    Take a look at http://www.vmware.com/products/datacenter-virtualization/vcenter-infrastructure-navigator/overview.html:
    vCenter Infrastructure Navigator automatically discover application services, visualize relationships  and map dependencies of applications on virtualized compute, storage and  network resources. A component of the        vCenter Operations Management Suite,  vCenter Infrastructure Navigator enables application-aware management  of infrastructure and operations to better understand the impact of  change, provide more complete disaster recovery protection and minimize  downtime.
    Automatically discover and keep up-to-date the names and version numbers of application components and services
    Visualize application relationships, communication paths and  backend connections at the infrastructure, guest OS and application  level
    Map dependencies of application components on the underlying  virtual infrastructure to understand the impact of change and build  disaster recovery plans with confidence
    The use case you describe is more relevant to vFabric APM - VMware's perfomance management suit which among other capabilities, will alert and notify in case of application performance issues, unavailable services etc. take a look at http://www.vmware.com/products/application-platform/vfabric-application-performance-manager/overview.html

  • Monitoring and Alerting tools for Business Object Data Integrator

    Hi,
    We have Business Objects DI installed in AIX 5.3 environment. Please advise any type of monitoring and alerting tools for DI.
    Monitor tools to monitor Job servers(like job service and web services running properly) and also to monitor long running extraction jobs and alerting the same. Thanks.
    Thanks.
    Raj.

    Hi Thomas
    Though both the tools objectives are for Data integration, the purpose for both tools are different.
    SAP BODS/ BOBJ Data Integrator is an ETL tool which involves combining data residing in different sources and providing users with a unified view of the data
    SAP PI is a Middleware/EAI tool which have a mechanism/technology that connects different parts of an application or a series of applications
    SAP BOBJ Data Integrator
    Bulk Data Integration
    Extraction Transformation and Loading
    Deals of huge volume of data
    SAP PI
    It is process based integration of application data
    It is a middle ware which integrates various project applications into a common programming package that can be operate/access as a single application
    SAP NetWeaver PI is SAP’s implementation of Service-oriented Architecture (SOA) middleware and facilitates the integration of business processes that span different departments, organizations, or companies.
    SAP PI uses SAP NetWeaver Application Server and message servers where in fail over cases the messages can be resent again.
    The below differences will gives you more clarity
    Verdict is we can use both the tools for data transfer/migration and for choosing the tool depends upon the business requirement
    Please reply back if you need more information.
    Regards
    Murthy

  • Monitoring and Alerting Infrastructure : Errors raised during Event Calculation

    Hello together,
    System: Solution Manager 7.1 Sp7
    since one day I get this alert every five minute: "Monitoring and Alerting Infrastructure : Errors raised during Event Calculation".
    Name....................Errors raised during Event Calculation
    Start Time..............20.03.2014 15:12:27 CET
    End Time................20.03.2014 15:12:27 CET
    Managed Object..........Monitoring and Alerting Infrastructure
    Managed Object Type.....Technical Component
    Rating..................Red
    Category................Exceptions
    Status..................Open
    Opening the alert shows this:
    E2E Alert Analysis Report:
    This metric outputs the der Event Calculation Engine (ECE) error messages. The ECE runs by default every minute, under the job name SAP_ALERT_CALCULATION_ENGINE, which then starts the report ACE_CALCULATION_CONTROLLER.
    Analyze the error messages in the Application Log, as follows:
    Start the transaction SLG1, and enter the object E2E_ALERTING and subobject ENGINE.
    When opening trx SLG1 I can see this error:
    Aggregate for managed object 00215ACCD6DE1EE2B8FEE39484598162, type
    80E0ED08ADA71DEEBFD84650DEF6421F not found.
    How can I fix this?
    Thank you very much.
    Regards,
    Ralph

    Hi Ralph,
    We are facing the same issue is our system. I have checked the specified note and observed that few of the systems had to be updated in Managed System Configuration. I have updated the systems. But, the alerts have not stopped.
    Can you please tell me the procedure to resolve this issue?
    Thanks.
    Regards,
    Deepika R

  • Queue Monitor and Inbound Adapter Tabs in RWB are empty

    Hi,
    When we process messages in PI and want to see some monitoring data in the RWB we found that some screens do not show data. (PI 7.10)
    RWB --> Message Monitoring --> Integration Engineselect a message --> Details
    Then we get a new popup with 5 tabs:
    1. Mesage Data: OK
    2 Message Content: OK
    3. Inbound Adapter: when I log in an empty screen is shown
    4. Queue Monitor: when I log in an empty screen is shown
    5. end-to-end Monitoring : ends in Java dump
    I've looked into sap help and OSS, but I can't find any hints.
    Somebody any suggestions
    Thanks in advance
    Ron

    Hi Gokhan,
    Our technical consultants are having a look into the sap note.
    We have activated end-to-end montioring and now you'll see in the message monitor of the RWB that end-to-end monitoring is available.
    You activate it with RWB --> configuration
    Hope this clarifies it.
    Best regards
    Ron

  • Operations Manager 2012 R2 : how to find all my rules, monitors and alerts (all in one custom MP)

    How do I find all the rules, alerts, monitors and whatever in a give custom Management Pack?
    All the bits and pieces I have created I have stored in a MP called "1 - MYDOMAIN CUSTOM"
    Now suppose I want to review all my customisations. How do I do it? I had hoped that it would appear in a scope somewhere...
    CarolChi

    Many thanks
    1) I can't find this: in the Authoring Console I have
    management pack templates, distributed applications, groups, management pack objects
    In Management Pack Objects I have Attributes, Monitors, Rules, ... but no where can I find ALL the customisation I have done.
    2) Where can I find an example of powershell?
    3, 4) Where do I get the override explorer. I was hoping not to have to use other tools.
    5) I read that the Efffective Configuration Tool works with older versions of OpsMgr - is this true?
    6) Again can you help with a link to the MP Viewer Tool?
    CarolChi

  • Central PI Monitoring and Alerting in Solution manager

    According to SAP AG documentation [White Paper|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/104677d9-fc8c-2e10-dc92-c4e660b0dd8c?quicklink=index&overridelayout=true] - the Solution Manager 7.1 onward provides a central PI monitoring for technical componnents and buisness alerts in a single dashboard.
    My question is : does the ALE monitoring status also included in this monitor?
                               does the SAP PI IDoc adapter (ABAP Based) of PI 7.11 can be monitored there as well?

    Hi,
    As per the below help.com ALE/Interface monitoring still part of the Business process monitoring.
    http://help.sap.com/saphelp_sm71_sp01/helpdata/en/c7/42f64707c04207b1b17a610c436a34/content.htm
    But again PI Idoc adaptor can be monitored using channel monitor of PI monitoring.
    http://help.sap.com/saphelp_sm71_sp01/helpdata/en/6a/b663dd510549d58456c38c5d2e0da0/content.htm
    Please check,
    Thanks,
    Jansi

  • Adapter monitoring and Alerts

    Hi,
    I have configured a sender e-mail adapter. The adapter is polling the inbox of an e-mail account. Is it possible to monitor this action with alerts?
    E.g. the email account is locked. So the adapter in the adapter monitoring is red and shows an error message. Is this error picked up by the alerting framework?
    I don't get any alerts on this situation.
    Ron

    Ron,
    Like mentioned , check the note 913858 .
    Also, just try this,
    Make where the error occured as ALL ( INCLUDE INTEGRATION ENGINE and ADAPTER ENGINE ) and then test the user and see if the Alerts are generated.
    Also, check for any dump in St22
    Regards,
    Bhavesh

  • Transaction linking, Monitoring and Alerting product

    Hi,
    I wanted to check if there is any product from BEA Systems which can be used to
    capture meta data at different points in a business transaction...The business
    process could be a multi hop process...Meta data from one hop to another can usually
    be linked with some attributes and some times the linking algorithm can be complex...
    We are investigating if there are any products which can be used to capture the
    transaction attributes, perform the linking between the meta data at different
    hops and also where we can specify some business rules like if we don't have matching
    data at some hops for a transaction flow to perform some altering function...So
    the product will be doing some transaction monitoring activity...
    If anyone has any information about this kind of software please let me know...
    Thanks
    Surajit

    Hi Ralph,
    We are facing the same issue is our system. I have checked the specified note and observed that few of the systems had to be updated in Managed System Configuration. I have updated the systems. But, the alerts have not stopped.
    Can you please tell me the procedure to resolve this issue?
    Thanks.
    Regards,
    Deepika R

  • XI queues - Monitoring and unlock

    Hi gurus,
    Is there any standard procedure in order to monitoring queues (input/output) in XI 3.0?
    Is there any solution to unlock queues automatically?
    I hope somebody can help me!!
    Thanks

    Hi,
    yes u can monitor queues in XI
    SMQ1-outbound queue
    SMQ2-inbound queue
    SMQ1 – qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
    SMQ2 – qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
    see here fro details
    http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
    Outbound Queue Administration
    http://help.sap.com/saphelp_nw04/helpdata/en/4c/cf5c3c3b067331e10000000a114084/content.htm
    Inbound Queue Administration
    http://help.sap.com/saphelp_nw04/helpdata/en/b0/df5f3c8dde1c67e10000000a114084/content.htm
    queue status fro SMQ1
    http://help.sap.com/saphelp_nw04/helpdata/en/ad/7b623c6374a865e10000000a11402f/content.htm
    queue status for SMQ2
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/b9f2407b937e7fe10000000a1550b0/content.htm
    Regards
    Biplab

  • Portal monitoring and alerting - Industry standard

    Hi All,
    We wanted to put up alert system for Portal. We have the standard set of alerts set which is being taken care by CCMS, also have the solution manager diagnostics set for portal and other systems. What we want is the client side monitoring which could be http response time and if it exceeds the threshold will alert us. Remember the alerting is major criteria here else the monitoring can be performed by diagnostics which we are doing on regular basis.
    Is there a indusrty standard available for portal for such alerts? I am currently analysing 2/3 other products for the same. I want to take an advise from you all that what product is being used at your end and what are the benefits over Solman and CCMS.
    Please let me know.
    Regrdas,
    Pankaj

    Hello Pankaj
    You might want to look into EEM (End-user Experience Monitoring) for SAP Solution Manager which has lots of information available (demo, video) on SAP SDN on the following URL:
    [http://wiki.sdn.sap.com/wiki/display/EEM/Home]
    In short it enables you to record actions of end-users and then monitor those actions (response times and so on) of what your users normally perform during daily tasks and by doing that getting the technical view on what users are experiencing to be slow.
    Kind regards
    Tom

  • Queue Monitoring and subdeployment

    I created a queue, and enabled the subdeployment for that queue under the subdeployment tab, after I save it and go to the "Monitoring" tab, and in that tab I get the following error message in red:
    The requested attribute is not exposed through JMX: getJMSRuntime
    Now I can not see any mesages in the queue, even though I send them there.
    How can I get the "Monitoring tab to work again ?
    Thanks

    Hi,
    Please check whether the subdeployment that the queue is associated, has a valid JMSServer target and that JMSServer is currently active (deployed on currently running server) and the parent module also has valid targets.
    Btw, what release of the WLS (console) you are seeing this? Do you have mixed releases of servers (Admin server and managed server) in this domain ?
    Thanks
    Kats

  • Monitoring and Alerting from Essbase Admin Console.

    Hi Gurus,
    We are running a calculation scripts in Essbase 11.1.1.1 about 4 times a day. Sometime this scripts just failed or take too much time. Is there any machanisim/configuration in EAS that when scripts fails then the admin or users can get message?
    Thanks
    -Samar-

    Hi Samar,
    EAS is not going to give you this. However there are some tools that will.
    Accelatis Ascension Suite will provide a complete range capabilities to address what you require and much more. It will monitor your logs, track events you define, and take action(send email, kill process, etc) on failure or success.
    If you want to go the free route, I think the first step is to take a look at jRightLog. It provides log tailing and parsing into a format where you can then store the data in a database somewhere for later analysis. Once you get the data in the database, you create a server to monitor it and provide feedback as it does.
    http://code.google.com/p/jrightlog/
    Robb

  • Monitor BizTalk Host Queue length and suspended msgs w/SCOM

    First, I hope the BizTalk forum is the right place to ask this. Maybe I should try the SCOM forum as well.
    I'm trying to create two monitors (Not rules, as we want the alert to be automatically healthy when under treshold again and we want to see the status state as well) in SCOM based on performance counters for BizTalk Msgbox Host Queue Length and suspended
    msgs. My question is what I should use as target (class) in SCOM? And can I use "All instances" of the counter or must i create a monitor for each instance (This is a lot of work and not very dynamic)? We want to monitor all the instances/hosts with
    different tresholds, so the first thing I did was to target the "BizTalk Host" class, so I can do overrides to different hosts.
    The problem with this is it will generete a alert for all hosts if one instance is over treshold. I also tried to target the "Run-time role", and this actually works better, but not perfect as i cannot set a treshold for just one instance/host
    then and it will close the alert if any other intance is under treshold.
    Anyone have experiences with SCOM and monitoring Hosts queues and/or suspended msgs as monitors? 
    thank you in advance for all suggestions!

    I would suggest to look into spool table and its size . As per recommendation it  count should not be greater than 3000 per server .
    Its easy way to monitor the performance counter "Message Box:General Counters /Spool size".you can execute one the following SQL in the BizTalk message box database.
    You can have a counter for spool table size and manually you can use below sql query to find out the count.
    SELECT count(*) from SPOOL WITH (NOLOCK)
    SELECT top 1 rows  FROM sys.partitions WHERE object_id = object_id(‘spool’)
    Note :The NOLOCK keyword is important in first query, you don’t want to put any locks in the spool table while measuring the row count.  The second query is the one used by the performance counter “Spool Size” using the stored procedure
    “MsgBoxPerfCounters_GetSpoolSize”
    Reference :http://msdn.microsoft.com/en-us/library/aa561922.aspx
    Thanks
    Abhishek

  • Where do I find 'MQ Cluster Monitor' and 'Message Queue Universal Client' ?

    This video on mq.dev.java.net uses two utilities called the 'MQ Cluster Monitor' and the 'Message Queue Universal Client'. The narrator says that these are 'shipped with the Message Queue product'.
    I dont see the utilities in my Open MQ installation. What am I missing ?
    - Hemant Bedekar
    RedSeal Solutions

    Cluster Monitor can be launched by typing these commands -
         cd /MessageQueue/mq/examples/jmx
         java -classpath /MessageQueue/mq/lib/imqjmx.jar:. MQClusterMonitor
    Universal Client can be launched by typing these commands -
         cd /MessageQueue/mq/examples/applications/uclient
         java -classpath /MessageQueue/mq/lib/imqjmx.jar:. UniversalClient
    - Hemant Bedekar
    RedSeal Solutions

Maybe you are looking for