CIF replishment indicator for ECC to APO

Hi, i want to CIF a value from ECC to APO which must sit in REPLINDI which is on the APO side, table /SAPAPO/MATLSPP... I was not able to find this field on either sides... PLZ HELP...

I can use the CIF for independent demands or PIR's from ECC to APO. But the CIF functionality that sends independant requirements ignores MRP elements with type SB for dependant requirements you can not pick them up. At least I have not found a method for the standard CIF to send MRP elements SB as of yet.
-Mike

Similar Messages

Regarding Integration Model to CIF from ECC to APO

Hi ,
Please assist me in the following issues:
What will the impact if any material is ciffed twice or multiple times from ECC to APO through IM ...will it generate inconsistency ? if so, how we can avoid this ?
While I'm ciffing the material from ECC to APO through IM, the ' Find Master Data Object ' is showing certain number say 'X' but when I'm running CTM for it the explosion of BOM of Master Data is showing less number of material than 'X'...in that case what might be the possible issue ?
While generating IM , can I club Sale Order, Sale Order Stock, Planned Order, Prodn order under same variant ? or ill it generate inconsistency ?
TIA
-Michael

Hi Michael,
1. It is not a problem. Is is quite common to CIF materials twice a days or even more. It shoul not generate inconsistencies.
2. You could have more materials than materials bith BOM. In other words, maybe not all your materials have a BOM.
3. Its recommended to have a separate integration model for your object.
Read this document with the Best Practices:
https://websmp102.sap-ag.de/~sapidb/011000358700000715082008E
Also, note that I was mentioned by Dog Boy, it is convinient asking single questions in your threads. This way you will find more responses.
Kind Regards,
Mariano

Master/Transaction data from ECC to APO-BW

Hi All,
     Normally we come across scenarios where Master/Transaction data is pulled from ECC to BW and then pulled into APO-BW. What are the pros and cons of CIF (direct connection between ECC and APo-BW) rather than pulling data from ECC to stand-alone BW and then into APO-BW?
Regards,
Joy

Hi Santhana,
If you want to add data of ECC to APO BW & Then in to DP, then follow the following Steps.
1. Create Generic Data Source in ECC for thet Sales Order table.
2. Replicate that data Source in to APO BW with Source System.
3. Create whole data flow process by using created Data Source.
    Data Flow Process: 1. Info Package
                                  2. Info Source
                                  3. Info Cube
                                  4. Transformation between DS & IS, Then IS & IC
                                  5. Data Transfer Process.
4. Load data from ECC to APO BW
5. Use transaction /n/sapapo/tscube, for copy Info Cube data to Planning Area.
Hope this will help you.
Regards
Sujay

Issue in CIF data between ECC to APO

Hi Experts,
We have ECC and APO system in our landscape. we have configured CIF and transferred data between ECC and APO however after ECC system refresh CIF configuration is not working. we verified and reconfigured the CIF configuration but still no luck.
strange thing is, while sending the data for e.g vendor from ECC to APO, there is no error reported. It displays successful in both qRFC trace files but the transferred data is nt reflecting in APO system.
There is no system run time error, no errors in system log (SM21), no logs in SLG1 application log, no erros in qRFC trace files.
we have enabled RFC user trace but can't conclude the issue. could you please anyone let me know where we can check the error log or how to resolve this?
Outbund Queue logs from ECC:
QTYPE :OUTBOUND/S
DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:44:56 300             20.03.2015 17:44:56 N          N
        0A1A01720F70550C0F4019E7                                       SENDING
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                      QTYPE :OUTBOUND/S
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:44:57 00:00:01 300          20.03.2015 17:44:56 N       N
        0A1A01720F70550C0F4019E7                                       CONFIRMD
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                      QTYPE :OUTBOUND/S
DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:44:57 300             20.03.2015 17:44:56 N          N
        0A1A01720F70550C0F4019E8                                       SENDING
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                      QTYPE :OUTBOUND/S
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:44:57 00:00:00 300          20.03.2015 17:44:56 N       N
        0A1A01720F70550C0F4019E8                                       CONFIRMD
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Inbound Queue trace log from APO:
QTYPE :INBOUND
DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 300                20.03.2015 17:44:56 N          N
        0A1A01720F70550C0F4019E7                                       SENDED
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 17:39:48 300             20.03.2015 17:44:56 N       N
        0A1A01720F70550C0F4019E7                                       FINISH
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
                                       QTYPE :INBOUND
DATE       TIME     CLIENT     USER            QDATE      QTIME    BJOB       QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 300                20.03.2015 17:44:56 N          N
        0A1A01720F70550C0F4019E8                                       SENDED
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 17:39:48 300             20.03.2015 17:44:56 N       N
        0A1A01720F70550C0F4019E8                                       FINISH
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C2559         0A1A01720F70550C0F4019E7      RUNNING
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C2559         0A1A01720F70550C0F4019E7      FINISH
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C2559         0A1A01720F70550C0F4019E7      CONFIRMD
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_LOC_INBOUND
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C255A         0A1A01720F70550C0F4019E8      RUNNING
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C255A         0A1A01720F70550C0F4019E8      FINISH
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
                                       QTYPE :INBOUND
DATE       TIME     EXETIME CLIENT USER            QDATE      QTIME    BJOB    QEVENT
        TID                              ORGTID                        QSTATE
    DEST                                    ERRMESS
20.03.2015 17:39:48 00:00:00 300             20.03.2015 17:44:56 N       N
        0A1A019D23F8550C0E0C255A         0A1A01720F70550C0F4019E8      CONFIRMD
    <SID>CLNT300
LUWCNT   QNAME                    FNAM
00000001 CFLDSHQCLNT300_0014      /SAPAPO/CIF_GEN_EVENT
Thanks and regards,
Pradeep

Hello Pardeep,
Please check the setting of SMQS and SMQR for CF and client registration
these entries, the field 'TYPE' is set to 'R'.
QIN scheduler may be available for every client if you are working in this client with registered inbound queues.
Choose Edit->Activate scheduler from the menu (available in both SMQR and SMQS)
During processing in dialog work processes, the system uses a parallel RFC to restart the registered inbound queues. For this, you can use transaction RZ12 to specify a group of application servers and dialog work processes that are allowed to use a QIN scheduler. You must use transaction SMQR to assign the group name to the relevant QIN scheduler.
Different parameters in SMQR are explained in note 1579728. The explanation for SMQS is similar
Also try the report RSQIWKEX
Best Regards,
R.Brahmankar

CIF - Master/Transactional Data From ECC to APO

Working on CIF Data From ECC6.0 to APO(SCM 5.0)..
If i choose MRP type XO in ECC - Master Data & Transactional Data is moving properly to APO.
As we are using MRP in ECC6.0..and the MRP Type is PD...
I want to CIF the Master Data & Transactional Data using MRP Type PD? is it possible?How?
Regards,
Rajesh Patil

Hi Rajesh,
As visu rightly indicated, it is always safer to use XO while planning in APO. Still, if the business requirement compels to use PD, you can cif with PD, then copy the data from active to an inactive version and then carry out the simulation planning. Once results are copied, you can change the mrp type to xo in R/3 and re-cif it. Then you can compare the result in APO between active and inactive versions.
Regards
R. Senthil Mareeswaran.

CIF of transaction data from ECC to APO

Hi,
I wanted to know where we maintain the configuration for real time transfer of transaction from ECC to APO.
I know for master data we have an option in CFC9 for real time/periodic transfer. Is there any similar config for transaction data too like sales orders etc.

Hi Alok,
To allow online transfer of changes to transaction data from SAP R/3 to SAP APO, you have to activate generally the BTEs in SAP R/3.
This is done in R/3. This is the path:
SPRO --> Integration with Other SAP Components --> Basic Settings for the Data Transfer --> Change Transfer --> Change Transfer for Transaction Data --> Activate Online Transfer Using BTE
You can read about it here:
Change Transfer for Transaction Data - Integration via APO Core Interface (CIF) - SAP Library
Then of course you will need to generate and actiave your IModels.
Kind Regards,
Mariano

Amend Forecast after CIF import from ECC to APo

Hi all,
I need to amend the forecast in APo after a particular Sales Order type has been imported.
The import Occurs using an RFC connection to trigger the Function Module /SAPAPO/CIF_SL_DOC_INBOUND
Is there a user exit that gets fired after this completes? I've found one at the beginning but not at the end.
If anyone has any other ideas how this could be achieved then please let me know.
Thanks.
Regards
Dave

I can use the CIF for independent demands or PIR's from ECC to APO. But the CIF functionality that sends independant requirements ignores MRP elements with type SB for dependant requirements you can not pick them up. At least I have not found a method for the standard CIF to send MRP elements SB as of yet.
-Mike

Difference in Material availability date for ECC ATP check & for APO ATP check in the same order

Hi Gurus,
I have a question: on what basis material availability date is calculated in forward scheduling?
Eg:
For a customer GR hours are maintained in unloading point calendar in customer master and Customers are not CIF'ed across to APO.
GR hours are maintained for weekdays from 8:00 to 12:00 & 1:00 to 6:00.
In a sales order with two line items with Requested date today & plenty of stock on hand for two products( ECC & APO) where line 10 (product 1) triggers ECC ATP check & line 20 (product 2) triggers APO ATP check at same location (loc1).
RDD is today, material availability date for ECC ATP check (line 10) is today (working as expected) but where as the material availability date for APO ATP check (line 20)is pushed to next day by which for the same customer there are different delivery dates. And two delivery notes will be created & truck will be on road at different times for the same customer which is unacceptable.
What am I missing here to get the material availability date as today for forward scheduling? Please guide me on this.
Thanks,
Nihar

Hi Nihar
Though the logic you mentioned makes sense. I am confused here with the data you have provided:
UTC day
UTC time
CET day
CET time
UTC+6 day
UTC+6 time
RDD
30/04
17:24
30/04
7:24
30/04
23:24
MAD
30/04
17:24
30/04
7:24
30/04
23:24
Lod/GI
02/05
17:24
02/05
7:24
02/05
23:24
Del
12/05
17:24
12/05
7:24
12/05
23:24
Del
13/05
1:00
13/05
3:00
13/05
8:00
Load/GI
05/05
1:00
05/05
3:00
05/05
8:00
MAD
02/05
1:00
02/05
3:00
02/05
8:00
In the first row, the difference in RDD in UTC and UTC+6 is 6 hours. However, in the last three rows I can see the difference between UTC time and UTC+6 time is 7 hours. Would you know the reason to this? Also, in the first four rows, CET time = 7:24 which should had been 19:24. Please correct me if I am missing something here.
Thanks,
Parth Soneji

How to delete Master Data transferred from ECC to APO via CIF

Hi, all
I'm connecting SCM 5.1 with ECC 6.0 via CIF.
When activating Integration Model in ECC, the following error occurred;
"Location 0001 of type 1001 (BSG 592BUSGP) already exists in APO"
This is because Location 0001 was already transferred from different ECC client via CIF, and not cleared.
I'm now trying to initialise master data transferred from ECC to APO via CIF, but in vain.
I suppose I have to first delete all master data CIFed from ECC in APO, or have to execute initialisation of APO master data with ECC data in ECC.
Please tell me how to do this.
For details, please read the followings;
I connected APO client with ECC client 590.
I transferred Plant and Material Master from ECC to APO via CIF.
After that, I wanted to change ECC client from 590 to the other.
I created the other client (592) by client-copying from 590 with SAP_ALL copy profile.
I deactivated Integration Model in ECC 590, and activated the same in ECC 592.
Here, I faced the problem.
The initial data transfer failed due to the duplicate of data.
Now I'm wondering how I can initialise master data in APO and transfer initial data from ECC.
Due to testing purposes, I have to change ECC clients from one to the other this time, but I cannot initialise master data in APO and cannot tansfer initial data from different ECC client.
thanks in advance,
Hozy

Hi all,
Thank you very much indeed for lots of your replies.
Thanks to all of your advices, I'm getting to understand what to do.
Well, I'll say I have to create one more client for testing with other ECC clients or I have to rebuild the client by client-copying from 001 and implementing all transportation requests, for marking del flags to each master data and running del programme sound like tough work, and sound like odd ..
Then, I've got next issue here.
In SCM-APO, I use BI objects, and , if I have to create several clients for testing, I have to set up clients where you can use both BI objects and CIFed master data.
I suppose I have to change 'BWMANDT' in RSADMINA and make RSA1 accessable in other SCM clients and implement tests.
Also, I have to register BI System for newly created SCM clients in RSA1-SourceSystem.
Well, if you have any experiences on this kind of use, and if you have any advice on it, please give me any tips.
Particulary, I'd appreciate very much if you give me advice on which way you have chosen; creating several clients or rebuilding the one client in SCM-APO when you use both BI objects, CIFed master data and Demand Planning.
Thanks in advance.
Hozy

How to CIF enterprise Change Management ECM, from ECC to APO

Dear All.
I am facing problems during CIF process for ECM (Enterprise Change Management) from ECC to APO.
Every change into Material Master, BOM, etc, we must to create one Change Number (CC01) and link with the master data that we are changing.
But when we are changing the BOM status to 02 - Inactive for a specific period, and then transport this information from ECC to APO using Core Interface, into APO the BOM, in this case PPDS, will be changed for the Whole Period. It means that the PPDS will be set as Inactive into APO being set to become inactive in the future on ECC.
Thank you all.

Somebody knows where I can found information regarding Core Interface for ECM (Enterprise Change Management).
Thank you all.

What r the prerequisites for implementation scm-apo in ECC 6.

HI,
what r the prerequisites for implementation scm-apo in ECC 6.
Thanks,
Ashutosh
9891595497

Hi Ashutosh,
you can find all informations about the implementation (installation /upgrade) of SCM on the SAP help portal.
In http://help.sap.com choose in "SAP Business Suite" the "SAP Supply Chain Management".
In Knowledge Center for SAP Supply Chain Management (SAP SCM) choose the required SCM release e.g. SAP SCM 5.0 and open it.
Here under "Installation, Upgrade, Master and Operation Guides" you can find all necessary information about the installation, technical upgrade and operation of SAP SCM.
The Master Guide for SAP SCM provides important information about the installation of the relevant scenarios and the components. It links to all other documents that are required for the implementation of a specific scenario, for example to the Upgrade Master Guide, which is the important overview guide for upgrading scenarios .
I hope I could help you with these informations.
Regards,
Tibor

Transfer of PIR from ECC to APO - Time stamp

Hi Friends,
We are transferring Planned Independent requirements from ECC to APO through CIF.
In APO Product view Forecast requirements Date is sync fine with ECC date however the time is setting default to 03:00:00 am.
we want the time to be set to 06:00:00 am by default.
How we can we archive this?
Regards,
Krish

Dear Tiago,
I changed Product view Time zone settings, and issue resolved.
Thanks for your valuable reply. Awarded you the points.
Regards,
Krish

How to transfer Sales BOM from ECC to APO DP

Hi,
Demand planning require Sales BOM from ECC. Sales BOM in ECC will not have Routing & Work center, then how a PPM with Sales BOM can be transferred. If i have to create a dummy routing & WC for those sales BOM it will be tidious job to create all the master data. Is there any way to transfer the BOM alone from ECC to APO.
Please throw some light on it.
Thanks & Regards
Shan

Hi Somnath / Ritesh,
Are you sure about ciffing Sales BOM(usage 5)to APO as PDS ? Did you test it or your comments are based on SAP documentation?
I tried to CIF Sales BOM as SNP PDS, it is creating PDS with only parent item.Child items are missing.I have not used any production version here.
If i use production BOM(usage 1), it is creating PDS with both parent and child items.I have not used any production version here also.
SAP says BOMs can be ciffed to APO as PDS. No productions versions are required. but it has not mentioned about BOM's usage. May be , Is it by default production BOM?
One more question, Is it possible to create production version with BOM usage 5? It has no meaning right..
I think system does not allow you to create production version with BOM usage 5.
I also tried with BOM usage 2. In this case also it behaves like sales BOM.
looks like only production BOM can be ciffed with proper BOM structure in APO.
if required i can send you the link to share screen shots.
Pls comment..
regards,
Umamahesh

Vendor product relation not transfered from ECC to APO

Hi,
I am new to APO.
We are transferring the info records(me13n) details from ECC to APO by CIF .
But in APO system , when I check the product for the location(/sapapo/mat1) it says the product is not created for vendor.
but this details are present in info records in ECC.
Hence currently, we are manually creating the products for vendor.
Is there any BADI where all vendor-product link can be transferred

Hi Rachel,
You can use BAdI: /SAPAPO/CIF_ENHANCE_TPSRC (method CHANGE).
Take a look at SAP Note:
1873917 - CIF Purchasing Info Record - Product does not exist at
Vendor location
I never used that BAdI, but we made something similar. We made an enhancement some time ago to extend the Product at the Vendor Location. This was done for subcontracting at the time the PPM was transferred. I am not sure if this is your case, because you just mentioned that you needed for a vendor. If it applies, please check here:
483358
- Subcontracting: creating product masters automatically
Kind Regards,
Mariano

Problems when trying to transfer location from ECC to APO

Hello,
I am trying to transfer some locations from ECC to APO via CIF, but a system error appears: "Message no. SR053, data error for the location address 1000". For this reason I have not been able to transfer any location to APO. Could anybody tell what could the problem?
Thanks in advance,
David

Hello Tiemin,
Thanks for your answer. Based on your answer we changed some settings and now we are able to transfer locations from ECC to APO, but the error message is still showing, so even tough the error is not stopping the transfer now, we are not able to find what could be the problem. Any more ideas about what we need to check?
Thanks againg for you help.
David.

CIF replishment indicator for ECC to APO

Similar Messages

Maybe you are looking for