CIF resource: SNP Using resources with capacity expressed in EA

Hi,
My enviroment is APO-SNP SCM ver 5.0.
Planning with SNP Heuristic and Capacity leveling in weekly buckets.
I'm having requirement to express my resource capacity in bucket resource which is measured in EA (units).
I.e. say that my machine is having capacity 100pcs a day.
If I create it using Workcenter in R/3 and then CIF across the only options which I have are time-based capacities. I'm limited to create my resources via CIF, as we are going to use PDS generated by BOMs and Routing from R/3.
Can you give me some advise how I can manage this. I looked arround for solution but with no success.
Regards,
Stan

Regret to tell you that you can't.
If you are CIF'ing over PDS's which require a resource be created in R/3; you can't use any unit of measure besides time.  That is a limitation of R/3. 
our workaround was to create a multi-mixed resource with the number of hours available per day = capacity available in units.
So the resource could be available 100 hrs/day.
And each unit of production consumes 1 hr.
Ken Snyder

Similar Messages

  • Problem using Soundsoap2  with FC Express

    Hi, I just starting using Soundsoap 2, and want to clean up some noisy audio on some clips of a FC Express project. FCE will host Soundsoap (it shows up in the Effects Folder) but it is a completely different, scaled-back interface. Does anyone know how I can attain user directions to use this particualar interface?
    Secondly, and more importantly because this is how I would like to work, I would like to export the audio clip into the Soundsoap, process it there, and then bring it back to FCE so it is in sync. There are directions in the Soundsoap manual about doing this in imovie. They say to "Extract Audio", which then creates a new media clip in the media folder. After cleaning the audio in Soundsoap, you export the new cleaned file back to this media folder, and bingo, it replaces the old clip, in sync. Is there such "Extract Audio" command in FCE that would create a new media clip?
    Can it be that imovie does things that FCE can't?
    Thanks for any advice!
    Bob

    Hi, I prefer to use soundsoap2 as a standalone, but it's entirely possible to use it as an integrated plugin. Peak lite came bundled with an earlier edition of FCE or DVDSP. If you have that, use that as a launching pad. Alternatively, this may be possible: could you unlink audio and video. Designate the soundsoap standalone app as your audio editor, and then tell FCE to open the audio in your editor? That might work.
    Good luck.

  • Error using Filter with SQL Expression

    Hey all -
    New to Oracle BI, and getting a problem with Filters that use SQL Expressions.
    The column I'm filtering on is a 4 digit year, expressed as a VARCHAR2(4 byte) in the physical database. My SQL Expression in the filter is:
    Column: CAL YEAR 4 DIGIT
    Operator: Is equal to/in
    SQL Expression: TO_CHAR(ADD_MONTHS(SYSDATE, -24), 'YYYY'))
    when I click on the "Results" Tab I get the following error message:
    Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
    Odbc driver returned an error (SQLExecDirectW).
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <(>: Syntax error [nQSError: 26012] . (HY000)
    I've isolated the issue to the expression above. If I put in a literal value and supply a four digit year like below it works:
    Column: CAL YEAR 4 DIGIT
    Operator: Is equal to/in
    SQL Expression: *2008*
    Any ideas on what's causing my problem?
    Thanks!
    Mac

    macearl wrote:
    SQL View does not display unless data is returned by the query. Is that normal?
    Also, none of these options shows the literal result of the expression we built, i.e.:
    expression: CAST(YEAR(TIMESTAMPADD(SQL_TSI_MONTH, -24, CURRENT_DATE)) as CHAR)
    result: *2008*
    Having the ability to test expressions and see their results would be very helpful in debugging. If anyone knows how to do that please share!
    Thanks!
    MacOk, Probably shoud have figured this out before, but in response to my own question, the way to view the result of an expression is to add the expression as a column and include it in the Table Presentation.
    - Mac (he can be taught)

  • Using Catalyst with MS Expression Web

    I'm trying out Catalyst and found it easy to use and quickly created a .swf with an embedded video.  Where I'm having difficulties is using the .swf in a website created with Expression Web.  I've made sure I've included all of the files in the "deploy-to-web" folder, but the video will not play on a website.  It works when using the files in the "run local" folder, but not online.
    I've used other .swf files (created elsewhere) that have worked fine in the Expression Web site.
    Any suggestions?

    Hi,
    I'm not familiar with Expression Web, but SWFs created in Catalyst will work regardless of what applications you use to edit your HTML.
    If you are in the process of developing the site, and you run it on your local machine, you must use the files in the run-local folder - otherwise you will get errors.
    If you have deployed the site, and you have the SWFs on the web server, you must use the files in the deploy-to-web folder - otherwise you will get errors.
    What exactly do you mean by "the video will not play"? What do you see happening when you load the site?
    -Adam

  • Choppy sound when using airplay with airport express

    Hi everyone,
    This is my first posting and I hope I can get some advice with the following situation:
    Setting: a CISCO router with WIFI for my apartment, a mac mini, an iphone and an ipad all connected to the network. I also have an airport express that is attached to a set of speakers (the airport express is connected to the network as a client).
    When I try to use airplay from ANY device and play music to my speakers connected to the airport express, I get choppy sound (volume goes up and down) and bad sound quality.
    Any advice and how to go around the issue?
    I've updated firmware but the issue doesn't seem to be that.
    Best Regards,
    Will

    Hello WillMendoza,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS4215?viewlocale=nl_nl&locale=nl_nl
    Ensure that other devices are not trying to stream to the same Apple TV at the same time.
    Turn off Bluetooth on your iOS device by tapping Settings > Bluetooth.
    Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
    Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
    If possible, try to locate your Wi-Fi router in the same room as your iOS device and Apple TV.
    If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
    If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
    Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
    Best of luck,
    Mario

  • How to use unixODBC with Oracle Express on Ubuntu 8.10?

    I downloaded Oracle Express a couple of days ago, so I am totally new to Oracle.
    I tried connecting via unixODBC, using dsn=oracledsn, user=dba, password=abcd and received error info:
    1: st=01000, nerr=0, msg=
    [unixODBC][Driver Manager]Can't open lib '/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/libsqora.so.10.1' : file not found
    but the shared 'so' library actually does exist at the path above. I also set
    ODBCINI=/etc/odbc.ini;export ODBCINI and immediately checked it was in the environment.
    The .ini files are:
    /etc/odbcinst.ini
    [OracleExpressdrv]
    Driver = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/libsqora.so.10.1
    Description = Oracle 10g express driver
    /etc/odbc.ini
    [ODBC Data Sources]
    oracledsn = Oracle Express DSN
    [oracledsn]
    Driver = OracleExpressdrv
    Note: The dsn and the driver names are enclosed within square brackets but came out as web links above in the preview.
    After many hours of googling I have not been able to find how to connect via ODBC to a local (on my PC) Oracle Express.
    Advice would be most welcome.

    hello
    I have the same problem. My system is Fedora 11
    I set the odbcinst.ini and odbc.ini files as you mentioned. I also set the LD_LIBRARY_PATH :
    $ echo $LD_LIBRARY_PATH
    /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/
    when I try to connect using isql, I get that error:
    [01000][unixODBC][Driver Manager]Can't open lib '/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/libsqora.so.10.1' : file not found
    [ISQL]ERROR: Could not SQLConnect
    I couldn't figure out what I am missing.
    May someone help please?

  • How to use Jasperreport with Application Express?

    HI,
    We are really want to 'print out' from our apex applications, but by far no easy way to do so.
    (BI too expensive and complicated)
    I am tring to install Jasperreports with apex, but I don't know how to do it, I downloaded the windows version of Jasperreport.
    Any idea how to install and configure it to work with my apex applications?
    Peter

    See this thread for information on using Jasper Reports with APEX.. If this helps, please mark this thread as answered and assign points!
    APEX to Jasper parameter passing
    Thank you,
    Tony Miller
    Webster, TX

  • Using OBIEE with Oracle Express Edition Database? SOLVED

    I have a client that wants a quick demo of OBIEE. They sent us some csv files as the data source. I migrated them to Excel files for easier use, but the Excel files seem to have limitations on how I can combine the columns, such as concatenating and formatting.
    I then loaded them into an Oracle Express Edition database, assuming more "database" functionality would be available to me. I was able to load them into the Administration Tool, but Answers gives me the following error when I try to view any results from the Express database:
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 17001] Oracle Error code: 12154, message: ORA-12154: TNS:could not resolve the connect identifier specified at OCI call OCIServerAttach. [nQSError: 17014] Could not connect to Oracle database. (HY000)
    SQL Issued: SELECT COURSE_ENROLLMENT.CAMPUS saw_0 FROM BI_DEMO ORDER BY saw_0
    Thanks for any help. This is my first non-guided attempt using OBIEE.
    Edited by: markstuartnelson on Sep 29, 2008 5:22 PM

    Thanks. I got some assistance from a co-worker that is also using Express Edition. (This is also my first use of Express Edition.)
    Here is the tnsnames entry that I created, in case it helps someone else:
    DEMO_XE =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
         (SERVER = DEDICATED)
         (SERVICE_NAME = xe)
    )

  • SNP Resource available capacity variance

    Hi friends,
    need your help??
          I am using an SNP resource with capacity 500 min per day(Bucket). but after thew SNP run when i download the optimizer log data( Transaction:/SAPAPO/SNPOPLOG) the available capacity derived from the log is for the particular day is different than the actual capacity of the resource(i.e. it is less than the actual available capacity).
        How can be this issue resolved.??
    please revert back urgently

    Hi kiran ,
    Check for the following possible reasons :
    Try this resource in SNP Heuristic and check the capacity and do levelling.
    Check the Time zone and the calenders for this resource and plant.
    Check the overload % and min load % rounding & down times.
    See oss note 510339.
    Optimizer gives the results based on the settiing you have entered,and you will only be able to analyse it better .
    Regds // Digs...

  • Using rewire with Archibald

    I got Archibald [http://www.polyrythmic.org> and I got a big problem using it with Logic Express via reWire. I start both programs and when I switch to rewire in Archibald audio doesn't want to turn on. Does anybody use this [fantastic as for me] program with rewire? I tried to solve this problem with developer but with no luck.

    As you can read above I wrote "solved" in my previous post.
    But I have to add that later I had some problems in Logic (no problem with Ableton live).
    Archibald crashed and I was no more able to launch the app, neither to close the opened one (after a force quit the icon stayed again in the dock) or to launch after a reboot.
    I have Rewire 1.7.
    Apart this problem (but I don't know what made the app crash) archibald is really a good application very intuitive and with a good sound quality.
    I didn't open the manual to configure and use it.....
    I'd suggest to be more Apple compliant about user interface 'cause it's strange to find preferences here and there.....
    best wishes
    rob

  • Control surfaces with Logic Express

    hello all
    Im new to MAc , completely new having been PC since the year dot...Having used Cubase since atari days I have a Steinberg Houston Controller surface. Anyone know if it is possible to use it with Logic Express before I spend £150 on the programe please??

    Hi,
    nope, the surface wouldn't work natively on a Mac. You can only use it's MIDI features and remap the controls to functions in Logic. As long as the interface sends MIDI, this will work, but there won't be any access to the special features i guess. Guess why? Steinberg wouldn't want to provide a driver for another DAW than Cubase. Sneaky little ones they are...
    But you can try to sell it through ebay.
    Fox

  • What Vonage router to get with Airport Express?

    After a recent lightning strike , I'm in the market for a new Vonage-compatible router that I could use along with Airport Express. I used to have a Linksys RT31P2 for Vonage and I plugged an Airport Extreme base station into it for wireless, but both boxes got fried. Given that I want to use an Airport Express box which will provide wireless, I figured I could get a Vonage-compatible router that isn't wireless (like the RT31P2) and save some money, but I'm having a hard time finding one (it seems the RT31P2 is now obsolete). Best Buy and Comp USA carry two Vonage devices, the Linksys PAP2 and the Linksys WRTP54G. The PAP2 doesn't have an ethernet port in which I could plug the Airport Express so that's no good. And the WRTP54G is a wireless device (which I don't need) that costs $110 (I thought I'd be able to find something around $50).
    Any suggestions? Should I just buy the old RT31P2 on amazon or Ebay?
    If it matters I have a Scientific-Atlanta PSC2100 series cable modem, and my computers are Mac laptops (Powerbook G4 and iBook G4) with Airport Extreme cards.
    iBook/Powerbook G4   Mac OS X (10.3.9)  

    Best Buy and Comp USA carry two Vonage devices, the Linksys PAP2 and the Linksys WRTP54G. The PAP2 doesn't have an ethernet port in which I could plug the Airport Express so that's no good. And the WRTP54G is a wireless device (which I don't need) that costs $110 (I thought I'd be able to find something around $50).
    Best Buy also has rebates available on both of those devices. If you qualify the devices will be much cheaper.
    Since the AirPort Express has a single Ethernet port, your options are limited.

  • HP DeskJet F380 won't work with Airport Express

    Hello,
    I just purchased a HP DeskJet F380 AIO printer to use with my PBook G4 12". It works fine when connected directly to the PBook through USB, but when I try to use it with Airport Express it won't work. The printer setup utility recognizes the printer as a Bonjour printer but then the specific model won't show up in the pull-down menu. I've tried picking other HP printer models, but when I try to print the printer won't do anything at all. I asked HP support and they basically threw up their hands and gave no assistance.
    How can I make this printer work with Airport?
    Thanks!
    PowerBook G4 12"   Mac OS X (10.4.7)  

    Hi and welcome to the Discussions
    Try the process outlined here:
    HP Printers (and others) not on compatibility list and Airport Extreme Printing
    http://www.ifelix.co.uk/tech/1300.html
    If the supplied HP driver won't work (and as there are no third party alternatives available) then no it won't work with Airport.
    iFelix

  • SNP Planned order not following resource bucket capacity/factory calendar

    Hi gurus,
    SCM 5.0
    I am running SNP heuristics for a product and expecting planned orders for it.  It has corresponding production data structure and multimixed resource.  The resource has an assignd factory calendar and SNP bucket capacity.  The bucket capactiy availablity dates of the resouce is consistent with the factory calendar workdays/holidays.  Using simple lot for lot strategy, I am expecting heuristics to schedule the planned orders on the dates of the demand in compliance with teh SNP bucket capacity availability of the resource.  APO does not schedule on holidays consistent with bucket capactiy.  This is true until...
    We have a public holiday in factory calendar that needs to become a workday. To remedy this, we put a special rule for the factory calendar and explicitly made that holiday into a workday.  The changes were synchronized with APO, and this is also reflected in the bucket capacity of the resourc: former holiday now has bucket capacity after the calendar change.  However, when running heuristics, it still does not create SNP planned order on that former holiday that has been changed into workday.  Even if it is a public holiday, there is already a special rule for the factory calendar and the resource bucket capacity reflects this correctly. But SNP heuristics seems not to follow this change.
    Any ideas on this? looks like a bug.

    Hi Edgar,
    Yes, when your resource reflects the addional capacity of the holiday turned working day, then it is expected to be considered for the SNP planned order.
    Instead of SNP heuristics, you may try to check interactively in SNP planning book, if manual order creation in the bucket works out.
    Since this is a mutlimix  resource , it can also be checked if in PPDS planned order can be created on the day.
    The above checking may not solve your problem , but will get to know if at least manully the bucket is being considered or not.
    regards
    Datta

  • Can I Use Oracle DB 11g Express Edition with Atomikos  Transactions.

    Hi,
    Any Help is appreciated.
    Im able to use Oracle 11g Standard/Enterprise Edition with Atomikos for XA transactions.(XADMS).
    My question is Can I Use Oracle DB 11g Express Edition with Atomikos for XA Transactions.
    Thanks,
    kensuser

    Hi,
    Thanks for the answer.What jdbc drivers should I use. Because still Im getting exception when using Oracle 11g XE.
    But the same application runs with Oracle 11g Standard/Enterprise Edition.
    Here is my Exception trace: Sorry, I'm a first time user, so pasting the exception as it is, will find out how to format the same, as use this forum. ant help is appreciated. Thanks in Advance
    SEVERE: Exception sending context initialized event to listener instance of class org.springframework.web.context.ContextLoaderListener
    org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'UIToolAdminkit': Invocation of init method failed; nested exception is com.atomikos.datasource.ResourceException: XA resource 'EXXADBMS': resume for XID '3139322E3136382E35352E31382E746D30303030313030313937:3139322E3136382E35352E31382E746D31' raised -3: the XA resource detected an internal error
         at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor.postProcessBeforeInitialization(InitDestroyAnnotationBeanPostProcessor.java:135)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyBeanPostProcessorsBeforeInitialization(AbstractAutowireCapableBeanFactory.java:393)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1437)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:518)
         at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:455)
         at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:294)
         at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225)
         at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:291)
         at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193)
         at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:585)
         at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:913)
         at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:464)
         at org.springframework.web.context.ContextLoader.configureAndRefreshWebApplicationContext(ContextLoader.java:381)
         at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:283)
         at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:111)
         at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4206)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4705)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:840)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:463)
         at org.apache.catalina.core.StandardService.start(StandardService.java:525)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:754)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:595)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414)
    Caused by: com.atomikos.datasource.ResourceException: XA resource 'EXXADBMS': resume for XID '3139322E3136382E35352E31382E746D30303030313030313937:3139322E3136382E35352E31382E746D31' raised -3: the XA resource detected an internal error
         at com.atomikos.datasource.xa.XAResourceTransaction.resume(XAResourceTransaction.java:500)
         at com.atomikos.datasource.xa.session.BranchEnlistedStateHandler.<init>(BranchEnlistedStateHandler.java:57)
         at com.atomikos.datasource.xa.session.NotInBranchStateHandler.checkEnlistBeforeUse(NotInBranchStateHandler.java:66)
         at com.atomikos.datasource.xa.session.TransactionContext.checkEnlistBeforeUse(TransactionContext.java:85)
         at com.atomikos.datasource.xa.session.SessionHandleState.notifyBeforeUse(SessionHandleState.java:176)
         at com.atomikos.jdbc.AtomikosConnectionProxy.enlist(AtomikosConnectionProxy.java:204)
         at com.atomikos.jdbc.AtomikosConnectionProxy.invoke(AtomikosConnectionProxy.java:138)
         at $Proxy13.prepareStatement(Unknown Source)
         at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
         at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
         at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
         at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1573)
         at org.hibernate.loader.Loader.doQuery(Loader.java:696)
         at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
         at org.hibernate.loader.Loader.doList(Loader.java:2228)
         at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2125)
         at org.hibernate.loader.Loader.list(Loader.java:2120)
         at org.hibernate.hql.classic.QueryTranslatorImpl.list(QueryTranslatorImpl.java:935)
         at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:196)
         at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1148)
         at org.hibernate.impl.QueryImpl.list(QueryImpl.java:102)
         at org.springframework.orm.hibernate3.HibernateTemplate$30.doInHibernate(HibernateTemplate.java:921)
         at org.springframework.orm.hibernate3.HibernateTemplate$30.doInHibernate(HibernateTemplate.java:1)
         at org.springframework.orm.hibernate3.HibernateTemplate.doExecute(HibernateTemplate.java:406)
         at org.springframework.orm.hibernate3.HibernateTemplate.executeWithNativeSession(HibernateTemplate.java:374)
         at org.springframework.orm.hibernate3.HibernateTemplate.find(HibernateTemplate.java:912)
         at org.springframework.orm.hibernate3.HibernateTemplate.find(HibernateTemplate.java:904)
         at com.kensho.common.UIbundlDAOImpl.findAll(UIbundlDAOImpl.java:13)
         at com.kensho.common.UIbundlDAOImpl$$FastClassByCGLIB$$6f2db14b.invoke(<generated>)
         at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:191)
         at org.springframework.aop.framework.Cglib2AopProxy$CglibMethodInvocation.invokeJoinpoint(Cglib2AopProxy.java:689)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150)
         at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:110)
         at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
         at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:622)
         at com.kensho.common.UIbundlDAOImpl$$EnhancerByCGLIB$$8797972a.findAll(<generated>)
         at com.kensho.common.UIToolKitAdminBBean.getAllBundleItems(UIToolKitAdminBBean.java:37)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor$LifecycleElement.invoke(InitDestroyAnnotationBeanPostProcessor.java:346)
         at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor$LifecycleMetadata.invokeInitMethods(InitDestroyAnnotationBeanPostProcessor.java:299)
         at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor.postProcessBeforeInitialization(InitDestroyAnnotationBeanPostProcessor.java:132)
         ... 29 more

Maybe you are looking for