CIF STEPS to load data from ECC to APO from Process chain
Hi,
i try to create on ECC system a process chain in order to execute the CIF program for updating APO Material/Plant Master data on DELTA mode .
I am not sure that the procedure is correct, at the moment i put on a chain:
- Step 1 Program RIMODGEN with a specific variant
-Step 2 Program RIMODACT2 with a specific variant.
Is necessary a third step with RIMODACT2 in order to deactivate the integration model?
On APO we have to insert other standard step in order to complete the delta update?
Any experience on similar situation?
Thanks,
Veronica
Veronica
You do not need a third step. You do not need to deactivate the model. In fact, it is not recommended to do so. You do not need any step in APO.
If your CIF setup is correct, the first two steps should be enough.
If by 'Delta', you mean field value changes to material/ plants in an existing integration model, you dont even need to do CFM1/ CFM2 if you have setup transaction CFC9 for BTE (online transfer).
Rishi Menon
Similar Messages
-
Steps to load data from R/3 to BW
Hi all,
1. I am loading data fromDS : 2LIS_12_VCITM to cube. Can somebody explain what steps we need to follow in R/3 and then in BW.
2. Also i have a Z - Extract Structure for 2lis_13_vditm,which has additional fields, how or where should i link 2lis_13_vditm with Z-extract. And how does the newly added fields get value?\
Thanks,
Gowrihi gowri,
LO Cockpit Step By Step
LO EXTRACTION
- Go to Transaction LBWE (LO Customizing Cockpit)
1). Select Logistics Application
SD Sales BW
Extract Structures
2). Select the desired Extract Structure and deactivate it first.
3). Give the Transport Request number and continue
4). Click on `Maintenance' to maintain such Extract Structure
Select the fields of your choice and continue
Maintain DataSource if needed
5). Activate the extract structure
6). Give the Transport Request number and continue
- Next step is to Delete the setup tables
7). Go to T-Code SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (T-Code LBWG)
vi. Select the application (01 u2013 Sales & Distribution) and Execute
- Now, Fill the Setup tables
9). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Filling the Setup tables
vi. Application-Specific Setup of statistical data
vii. SD Sales Orders u2013 Perform Setup (T-Code OLI7BW)
Specify a Run Name and time and Date (put future date)
Execute
- Check the data in Setup tables at RSA3
- Replicate the DataSource
Use of setup tables:
You should fill the setup table in the R/3 system and extract the data to BW - the setup tables is in SBIW - after that you can do delta extractions by initialize the extractor.
Full loads are always taken from the setup tables -
Loading data from SAP BW standard table to master data text
Hi,
Can anyone please tell me the steps to load data from SAP BW standard table to master data text?
How should the data source be created?
Thanks in advance.Hi aparajith,
Have you loaded the master data attr ?
ECC Steps
then load the attr text
create the ztable using standard table using generic data source using table function.
there you can select the which field you required
check the data in RSA3
BI STEPS: -
check the source system connection.
replicate the data source
create of find the master data object for text (including attr)
map the transformation
run the info package
create the DTP.
check the data in target object.
Thanks,
Phani. -
Source System Creation in BI to load data from ECC 6.0
Our ECC 6.0 and BI 7.0 is one server. I would like to load data from ECC 6.0 to BI. How to create source system? I have source system for flat file and Data Mart (Myself source system) but don't know how to create source system to laod data from ECC 6.0. Please provide step by step guide.
Thanks.Check here:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
http://www.saptechies.com/connectivity-file-system-in-sap-bi/
http://help.sap.com/bp_biv370/html/index.htm
Thanks...
Shambhu -
Error while loading data from ECC to BI
Hi BW Experts,
while loading data from ECC 6.0 to BI i got error in details tab of the infopackage as datapackage 1 arrived in bw processing not yet finished.
Could any one help me out?
ThanksAmar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M -
Step by Step details on how to load data from a flat file
hi can anyone explain how to load data from a flat file. Pls giv me step by step details. thnx
hi sonam.
it is very easy to load data from flat file. whn compared with other extrations methods...
here r the step to load transation data from a flat file.......
step:1 create a Flat File.
step:2 log on to sap bw (t.code : rsa1 or rsa13).
and observe the flat file source system icon. i.e pc icon.
step:3 create required info objects.
3.1: create infoarea
(infoObjects Under Modeling > infoObjects (root node)-> context menu -
> create infoarea).
3.2: create char /keyfig infoObject Catalog.(select infoArea ---.context menu --->create infoObject catalog).
3.3: create char.. infoObj and keyFig infoObjects accourding to ur requirement and activate them.
step:4 create infoSource for transaction data and create transfer structure and maintain communication structure...
4.1: first create a application component.(select InfoSources Under modeling-->infosources<root node>>context menu-->create applic...component)
4.2: create infoSource for transation data(select appl..comp--.context menu-->create infosource)
>select O flexible update and give info source name..
>continue..
4.4: *IMp* ASSIGN DATASOURCE..
(EXPAND APPLIC ..COMP..>EXPAND YOUR INFOSOURCE>CONTEXT MENU>ASSIGN DATASOURCE.)
>* DATASOURCE *
>O SOURCE SYSTEM: <BROWSE AND CHOOSE YOUR FLAT FILE SOURCE SYSTEM>.(EX:PC ICON).
>CONTINUE.
4.5: DEFINE DATASOURCE/TRANSFER STRUCTURE FOR IN FOSOURCE..
> SELECT TRANSFER STRUCTURE TAB.
>FILL THE INFOOBJECT FILLED WITH THE NECESSARY INFOOBJ IN THE ORDER OR SEQUENCE OF FLAT FILE STRUCTURE.
4.6: ASSIGN TRANSFER RULES.
---> NOW SELECT TRANSFER RULES TAB. AND SELECT PROPOSE TRANSFER RULES SPINDLE LIKE ICON.
(IF DATA TARGET IS ODS -
INCLUDE 0RECORDMODE IN COMMUNICATION STRUCTURE.)
--->ACTIVATE...
STEP:5 CREATE DATATARGET.(INFOCUBE/ODS OBJECT).
5.1: CREATE INFO CUBE.
-->SELECT YOUR INFOAREA>CONTEXT MENU>CREATE INFOCUBE.
5.2: CREATE INFOCUBE STRUCTURE.
---> FILL THE STRUCTURE PANE WILL REQUIRE INFOOBJECTS...(SELECT INFOSOURCE ICON>FIND UR INFOSOURCE >DOUBLE CLICK > SELECT "YES" FOR INFOOBJECT ASSIGNMENT ).
>MAINTAIN ATLEAST ON TIME CHAR.......(EX; 0CALDAY).
5.3:DEFINE AND ASSIGN DIMENSIONS FOR YOUR CHARACTERISTICS..
>ACTIVATE..
STEP:6 CREATE UPDATE RULES FOR INFOCUDE USING INFOSOURCE .
>SELECT UR INFOCUBE >CONTEXT MENU> CREATE UPDATE RULES.
> DATASOURCE
> O INFOSOURCE : _________(U R INFOSOURCE). AND PRESS ENTER KEY.......
>ACTIVATE.....UR UPDATE RULES....
>>>>SEE THE DATA FLOW <<<<<<<<----
STEP:7 SCHEDULE / LOAD DATA..
7.1 CREATE INFOPACKAGE.
--->SELECT INFOSOURCE UNDER MODELING> EXPAND UR APPLIC.. COMP..> EXPAND UR INFOSOURCE..> SELECT UR DATASOURCE ASSIGN MENT ICON....>CONTEXT MENU> CREAE INFOPACKAGE..
>GIVE INFOPACKAGE DISCREPTION............_________
>SELECT YOUR DATA SOURCE.-------> AND PRESS CONTINUE .....
>SELECT EXTERNAL DATA TAB...
> SELECT *CLIENT WORKSTATION oR APPLI SERVER >GIVE FILE NAME > FILE TYPE> DATA SAPARATER>
>SELECT PROCESSING TAB
> PSA AND THEN INTO DATATARGETS....
>DATATARGET TAB.
>O SELECT DATA TARGETS
[ ] UPDATE DATATARGET CHECK BOX.....
--->UPDATE TAB.
O FULL UPDATE...
>SCHEDULE TAB..
>SELECT O START DATA LOAD IMMEDIATELY...
AND SELECT "START" BUTTON........
>>>>>>>>>>
STEP:8 MONITOR DATA
> CHECK DATA IN PSA
CHECK DATA IN DATA TARGETS.....
>>>>>>>>>>> <<<<<<<<<----
I HOPE THIS LL HELP YOU..... -
Help - Step by Step Material on How to load Data from flatfile to BI 7.0
Hi BI Experts,
Can any one send the document or a pdf file on how to load data from flat file to BI 7.0 in step by step process.
Thanks in Advance
Regards
Ramakrishna Kamurthy
+91-99631010731. On log on you will be placed in the SAP Easy Access Strategic Management/ Business Analytics
1. You see the screen divided in two segments.
2. Follow the left segment.
3. Click on the Business Information Warehouse.
4. Sub Menu  BW Administration.
5. You find various entries in it.
6. Now double click on UG_BW_RSA1-Administrator Workbench
2. Creation of Info Area
1. Click on InfoObjects.
2. Now in the right hand side screen select the InfoObjects (First item on the top). Right click the mouse and select Create InfoArea.
3. A dialog box pops up.
4. Give the InfoArea as ZIVY_Iarea.
5. Give the Long Description as ZIVY Info Area.
3. Create a Catalog:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_CHCAT
i. Description = ZIVY Character Catalog
ii. InfoObjectType: Check the Character. ( As we are creating the master data, check the Character)
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CUST and
i. Description Customer Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CUST: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP .
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_CUST, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_CITY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CITY and
i.
Description
Customer
City Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CITY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CITY, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_STATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_STATE and
i.
Description
Customer
State Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_STATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 25
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_STATE, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_CTRY
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_CTRY and
i. Description Customer Country Name.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_CTRY: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
1. Creation of Attributes and InfoObject from the ZIVY_CUST InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_CUST. Double click the InfoObject ZIVY_CUST.
6. You find the screen Change Characteristic ZIVY_CUST:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_CITY and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_STATE, ZIVY_CTRY.
11. Now, we will create another InfoObject ZIVY_TEL, from here.
12. So type ZIVY_Tel and enter the ENTER KEY.
13. A dialog box pops up, and request you If you want to Create an InfoObject
14. Select Create Attribute As Characteristic and click the check mark.
15. Another window pops up. Give the following:
i. In the General Tab:
1. Long Description: ZIVY Telephone Number
2. Short Description: ZIVY Telephone Number
3. DataType : NUMC
4. Length : 10
5. Uncheck Attribute Only
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies
iv. Now click the TICK MARK
1.
1. Click the ACTIVATE
2. A window pops up.
i. Select activate dependent InfoObjects.
ii. Click the Check Mark.
1. Creation of InfoObject: ZIVY_DATE
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_DATE and
i. Description ZIVY Date.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_DATE: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: DATS
2. Length: 8
ii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_CTRY, by clicking the icon ACTIVATE.
2. Create ZIVY Application Component:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Right click the mouse pointer and select the entry Create Application Component
5. A window pops up.
i. Application Component: ZIVY_APPCOMP
ii. Long Description : ZIVY Application Component
iii. Click the check mark.
1. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_CUST
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the Customer Info Object.
2. Select the Customer Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_CUST
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_CUST,
3. Second field is ZIVY_CITY.
4. And so on.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_CUST,
4. Third field is 0TXTMD.
5. Click the Transfer Rule adjacent to 0LANGUAGE
6. A window pops up.
a. Check the CONSTANT and give the value as EN
b. Click the TICK MARK.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_CUST_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_CUST_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_ATTR.
ii. Select ZIVY_CUST_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_CUST alias Customer Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_CUST_TEXT.
ii. Select ZIVY_CUST_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_CUST_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_MAT and
i. Description ZIVY Material Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_MAT: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 17).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_MAT, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_GROUP
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_GROUP and
i. Description ZIVY Material Group.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_GROUP: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data
2. Check the With Texts and make suitable Text Table Properties.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_GROUP, by clicking the icon ACTIVATE.
2. Creation of InfoObject: ZIVY_COLOR
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_COLOR and
i. Description ZIVY Material Color.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_COLOR: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 10
ii. In the Master Data/ Texts Tab:
1. Uncheck the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_COLOR, by clicking the icon ACTIVATE.
2. Creation of InfoObject from the ZIVY_MAT InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_MAT. Double click the InfoObject ZIVY_MAT.
6. You find the screen Change Characteristic ZIVY_MAT:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_GROUP and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Similarly, type ZIVY_COLOR.
11. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_MAT
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Material Info Object.
2. Select the ZIVY Material Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_MAT
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_MAT,
3. Second field is ZIVY_GROUP.
4. Third field is ZIVY_COLOR.
5. Check the mapping. If you dont see the mapping.
6. Click on the empty row in the group Assign InfoObjectField, the box to the right.
7. Type ZIVY_GROUP, ZIVY_COLOR.
8. Check the transfer rules.
9. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_CUST MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_MAT,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_Material_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_Material_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_ATTR.
ii. Select ZIVY_MAT_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_Material_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_MAT alias ZIVY Material Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_MAT_TEXT.
ii. Select ZIVY_MAT_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_MATERIAL_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SPER and
i. Description ZIVY Sales Person Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SPER: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
2. Use suitable formats in the fields.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
iv. In the Attributes Tab:
1. We need to create the Attribute InfoObjects. These could be done directly from here or even from the RSA1  InfoObject  ZIVY_IareaZIVY_CHCAT. This will be delt in the forth coming steps (STEP 24).
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_SPER, by clicking the icon ACTIVATE
2. Creation of InfoObject: ZIVY_SREG
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_SREG and
i. Description ZIVY Sales Region.
ii. Click the TICK mark.
1.
1. The next screen you see is Change Characteristic ZIVY_SREG: Detail.
2. In this screen the following fields have to be modified:
i. In the General Tab
1. DataType: CHAR
2. Length: 20
ii. In the Master Data/ Texts Tab:
1. Check the With Master Data and With Texts.
iii. In the Hierarchy Tab:
1. Uncheck the With Hierarchies.
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the InfoObject ZIVY_SREG, by clicking the icon ACTIVATE.
2. Creation of Attributes from the ZIVY_SPER InfoObject:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_CHCAT,which is ZIVY Character Catalog.
5. In this ZIVY_CHCAT, you see the InfoObject ZIVY_SPER. Double click the InfoObject ZIVY_SPER.
6. You find the screen Change Characteristic ZIVY_SPER:Detail.
7. Click on the tab Attributes
8. In the Character Attribute Box, type ZIVY_SREG and enter the ENTER KEY.
9. You see the relevant information regarding this being inserted.
10. Click the ACTIVATE
3. Create InfoSoure:
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Right click the mouse pointer and select the entry Create InfoSource
6. A window pops up:
i. Select the Direct Update of Master Data
ii. InfoObject : ZIVY_SPER
iii. Click the CHECK MARK.
1.
1. Now beneath ZIVY Application Component you see the ZIVY Sales Person Info Object.
2. Select the ZIVY Sales Person Info Object mentioned above.
3. Right click the mouse pointer, and select the entry Assign DataSource.
4. A window pops up.
i. InfoSource: ZIVY_SREP
ii. Source System: FLATFILE
iii. Check the TICK MARK.
iv. Just click yes for the coming window pop ups.
1.
1. Key thing
i. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First field is ZIVY_SPER,
3. Second field is ZIVY_SREG.
4. Check the mapping. If you dont see the mapping.
5. Click on the empty row in the group Assign InfoObjectField, the box to the right.
6. Check the transfer rules.
7. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. ii. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
iii. Click the Activate Button. By clicking the ACTIVATE BUTTON you just activated the ZIVY_SREP MASTER DATA.
iv. Now in DataSource : select the text.
v. Click on the tab Transfer Rules
1. Have a look at the data mapping here.
2. First Field : 0LANGUAGE
3. Second field is ZIVY_SPER,
4. Third field is 0TXTSH.
5. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file. Ignore the first field, as it is a constant. vi. Click on the tab DataSource/Transport Structure1. This order is very very important, as we retrieve the data from a CSV file. The same order must be in the CSV file.
2. If the order is different, just shuffle the rows.
vii. Click the Activate Button. By clicking the ACTIVATE.
1. Create the DATA required for this MASTER DATA
1. Open EXCEL.
2. Type the following data:
1.
1. Save as ZIVY_SREP_MASTER.CSV
2. The file should be saved in COMMA SEPARATED FORMAT.
3. Open EXCEL
4. Type the following data:
5. Save the file *** ZIVY_SREP_TEXT.CSV
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_ATTR.
ii. Select ZIVY_SPER_ATTR
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_MASTER.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii. Browse the data.
1. Create InfoPackage
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoSource in the left hand segment.
3. In the right hand segment, select InfoSources.
4. Select the application component you created ZIVY_APPCOMP alias ZIVY Application Component.
5. Beneath this, you see ZIVY_SPER alias ZIVY Sales Person Info Object
6. Beneath this you see a FLAT FILE.
7. Select this FLAT FILE, right click the mouse pointer and select the option Create InfoPackage.
8. A window pops up.
i. InfoPackage Description: Info package for ZIVY_SPER_TEXT.
ii. Select ZIVY_SPER_TEXT
iii. Click the CHECK MARK
1.
1. You see a new screen Scheduler (Maintain InfoPackage).
2. Click the tab External Data
i. Name of file: C:\Personal\SAP\MyWork\MyBW\ZIVY_SPER_TEXT.csv
ii. Check the CSV file.
iii. Click the Preview Button.
iv. A window pops up, click the CHECK MARK.
v. You see the data present in the EXCEL File.
1.
1. Click the tab Update
i. Have a look at the entries.
1.
1. Click the tab: Scheduler:
i. Click the button Start
ii. You now click on MONITOR BUTTON present on the tool bar.
iii.
Browse the data.
1. Creation of InfoObject Catalog with Key Figures:
1. Select the InfoArea just created ZIVY_Iarea.
2. Right click the mouse pointer and select the option Create InfoObject Catalog
3. A dialog box pops up.
4. Give the InfoObjCat = ZIVY_KEYCAT
i. Description = ZIVY Key Figures Catalog
ii. InfoObjectType: Check the Key Figures.
iii. Now at the bottom of this dialog box you see an icon called CREATE. Click this icon.
1.
1. The next screen in front of you is the Edit InfoObject Catalog.
2. Simply click the activate icon present on the Application Toolbar.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. Look for the InfoArea you created ZIVY_Iarea.
4. Select the catalog you created ZIVY_KEYCAT,which is ZIVY Key Figures Catalog.
5. Right click your mouse pointer, and select Create InfoObject.
6. A dialog box pops up.
7. Give the Character ZIVY_AMT and
i. Description ZIVY Amount Info Object
ii. Click the TICK mark.
1.
1. The next screen you see is Create Key Figure ZIVY_AMT: Detail.
2. In this screen the following fields have to be modified:
i. In the Type/ Unit Tab
1. DataType: Amount
2. Unit/ Currency = 0Currency
1.
1. Now save you work. Click on the SAVE icon on the COMMAND ToolBar.
2. Activate the ZIVY_AMT, by clicking the icon ACTIVATE.
2. Create InfoObject :
1. Go to the UG_BW_RSA1-Administrator Workbench.
2. Click on InfoObjects.
3. -
Load data from BW 7.0 DSO into a ECC 6.0 SD standard/Custom pricing table
Gurus,
We have a scenario, where we need to load data from a BW DSO to SD standard/Custom pricing table in ECC 6.0. That data will be few thousand records.
Per my knowledge, in BPS, retractors are available to update data from BW to ECC and OpenHub also can be used to handle similar scenarios.
Any one of you came across similar scenario?
If you have any third option (not BPS rectors or OpeHub) as a solution to handle this kind scenario, and share the knowledge, it will be greatly appreciated.
Thanks in advance,
VittalHi Yogesh,
Thanks for your reply.
We have large data volumes for Billing datasource and hence moving flat files using PI is not an option and also as i mentioned a part of requirement is monitoring of the whole process as well. What i mean by this is if a 1000 billing document items were passed on to CRM7 to create a member activities and because of some reason a member activity was not created for one of the billing doc items, we should know the problematic record and reason why member activity was not created in CRM7 (reason code). And then be able to fix it. All this requires an end to end monitoring capability and also guaranteed delivery of data to CRM7.
Hence i was trying to explore the enterprise web service option.
What i am not sure of is how to expose BW DSO delta request to CRM7 using a web service ? or any other method that gives end to end monitoring capability and also guaranteed delivery of data to CRM7.
Any other suggestions ?
Thanks
CK -
BPC 7.5 : Is it possible to load data from ECC to BPC
Hi,
Is it possible to load data from ECC to BPC in BPC 7.5 Netweaver version.
Thanks
Prasad BobburuOption 1 -
ECC -> BW -> BPC NW (Standard, or recommended for NW)
Option 2
ECC -> BW -> Openhub / Flat file -> BPC MS
This is more common for SAP customers, who are using BW, but running MS version
Option 3
ECC -> ABAP Extractor Program (generated flat file) -> BPC
Again a more common for SAP customers using BPC MS
-Kiran Malineni -
Loading data from SAP ECC to DS---Error
Hi all,
I am using Abap dataflow for loading data from a table in SAP Application to oracle database. I am getting an error during execution as follows.
I am using direct download method for transfer of data.need your valuable inputs.Hi phaneendranadh kandula,
Direct Download Method: It will directly transfer the data from SAP Application Server to Client Download Directory.
Note: It is not recommended because we cannot schedule job and not recommended for large amount of data.
Data Transfer Methods.
Data Services with SAP Direct Download Data Transfer Method
Not Recommended
We cannot Schedule
Not recommended for Large Amount of Data
Data Services with SAP Shared Directory Data Transfer Method
Recommended
Secure Method
Can Handel Large amount of data
can be executed in Background method
Data Services with SAP FTP Data Transfer Method
Recommended
Secure Method
Applicable in Multiple OS Environment
Data Services with SAP Custom Transfer Method
Recommended
Highly Secure -
Unable to load data from an ODS to a Cube
Hi all,
I am traying to load data from an ODS to a cube, and I'm getting the following msg at the bottom of the screen monitor: <b>"No corresponding requests were found for request REQU_BZUH9ZPYNL5XLQNB7K8IQDKFS in the ODS/Cube" Message no. RSBM043.</b>
I am unable to load the data. The QM status is yellow. When the process starts, on the left hand of the monitor it shows: "0 of 84408 records" which is ok. I load that with this package before and it works well.
Can you help me what I have to do? I tried to wait but it was the same: no progress and no data in the cube.
Thank you very much and kind regards,
MM.
May be this helps...
When I look at the status, it says that I have a short dump at BW. It was CALL_FUNCTION_REMOTE_ERROR and the short text is "The function module "SUBST_TRANSFER_UPGEVAL" cannot be used for 'remote'". This short dump occurs very much before I shoot the upload.
Thanks again.Hello MM,
Can you do the following..
make the Total status Red Delete the request from cube.
goto ODS -> Remove the Data Mart Status -> Try loading it again.
The error message that you get is common when we are trying to run a infopackage with the source object having no new request, (means all the requests available in the source are already moved to the targets). So please try the steps given above.
Hope it will help! -
To load data from a cube in SCM(APO) system to a cube in BI system.
Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
MeeraHi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy -
Dump when loading Data from DSO to Cube
Hi,
i get a short dump DBIF_REPO_PART_NOT_FOUND when trying to load data from a dso to a cube. From DSO to DSO it works fine.
any idea`s?
thx!
Dominikthe Dump occurs in the last step of the last data pakage in the DTP Monitor.
I checked the OSS note, but i don´t know how to check the kernel version.
Now i used another DSO for testing and i got another Dump with a different name.
After that i logged in again and it works with my test DSO data...
But still not working with the original one...
@Kazmi: What detaisl u mean exactly? -
Automatically trigger the event to load data from Planning cube to Standard Cube
Hello,
We have a below set up in our system..
1. A Planning BEx query using which user makes certain entries and writes back data to the planning cube.
2. An actual reporting cube which gets data from the planning cube above.
Now, what we want to do is to automate the data load from Planning cube to Reporting cube.
This involves 2 things..
1. Change the setting " Change real time load behaviour " of the planing cube to Planning.
2. Trigger the DTP which loads data from Planning cube to reporting cube.
We want to automate the above two steps...
I have tried few things to achieve the same..
1. Created an event in SM64,
2. In the Planning cube "Manage" Screen, clicked on "Subsequent Processing" and provided the event details. ( Not sure if its the correct place to provide the event detail ).
3. Wrote a ABAP program which changes the setting of the planning cube ( " Change real time load behaviour " to Loading )
4. Created a process chain, where we have used the event as a start variant, used the ABAP program as a next step, DTP run as the last step..
This i hoped, would trigger the event as soon as a new request comes and sits in planning cube, which in turn would trigger the process chain which would load the data from Planning cube to reporting cube..
This is not working. I dont think the event is triggering, and even if does i am not sure whether it will start the process chain automatically. Any ideas please ?hi,
try to do the transformation directly in the input cube by using CR of type exit, more details :
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/43/1c3d0f31b70701e10000000a422035/content.htm
hope it helps. -
Problem in Loading Data from SQL Server 2000 to Oracle 10g
Hi All,
I am a university student and using ODI for my final project on real-time data warehousing. I am trying to load data from MS SQL Server 2000 into Oracle 10g target table. Everything goes fine until I execute the interface for the initial load. When I choose the CKM Oracle(Create unique index on the I$ table) km, the following step fails:
21 - Integration - Prj_Dim_RegionInterface - Create Unique Index on flow table
Where Prj_Dim_Region is the name of my target table in Oracle.
The error message is:
955 : 42000 : java.sql.SQLException: ORA-00955: name is already used by an existing object
java.sql.SQLException: ORA-00955: name is already used by an existing object
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
I am using a surrogate key column in my target table alongwith the natural key. The natural key is populated by the primary key of my source table, but for the surrogate key, I have created a sequence in my oracle schema where the target table exists and have used the following code for mapping:
<%=snpRef.getObjectName( "L" , "SQ_PRJ_DIM_REGION" , "D" )%>.nextval
I have chosen to execute this code on target.
Among my attempts to solve this problem was to set Create Index option of the CKM Oracle(Create Index for the I$ Table) to No so that it wont create any index on the flow table. I also tried to use the simple CKM Oracle km . Both solutions allowed the interface to execute successfully without any errors, but the data was not loaded into the target table.
When I right-click on the Prj_Dim_Region data store and choose Data, it shows empty. Pressing the SQL button in this data store shows a dialog box " New Query" where I see this query:
select * from NOVELTYFURNITUREDW.PRJ_DIM_REGION
But when i press OK to run it, I get this error message:
java.lang.IllegalArgumentException: Row index out of range
at javax.swing.JTable.boundRow(Unknown Source)
at javax.swing.JTable.setRowSelectionInterval(Unknown Source)
at com.borland.dbswing.JdbTable.accessChange(JdbTable.java:2959)
at com.borland.dx.dataset.AccessEvent.dispatch(Unknown Source)
at com.borland.jb.util.EventMulticaster.dispatch(Unknown Source)
at com.borland.dx.dataset.DataSet.a(Unknown Source)
at com.borland.dx.dataset.DataSet.a(Unknown Source)
at com.borland.dx.dataset.DataSet.a(Unknown Source)
at com.borland.dx.dataset.DataSet.open(Unknown Source)
at com.borland.dx.dataset.StorageDataSet.refresh(Unknown Source)
at com.borland.dx.sql.dataset.QueryDataSet.refresh(Unknown Source)
at com.borland.dx.sql.dataset.QueryDataSet.executeQuery(Unknown Source)
at com.sunopsis.graphical.frame.a.cg.actionPerformed(cg.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
I do not understand what the problem is and wasting days to figure it out. Any help will be highly appreciated as my deadline is too close for this project.
Thank you so much in advance.
NeelHi Cezar,
Can u plz help me with this scenario?
I have one Oracle data model with 19 source tables and one SQL Server data model with 10 target tables. I have created 10 interfaces which use JournalizedDataOnly on one of the tables in the interface; e.g in interface for DimCustomer target table, I have 2 tables, namely Customer and Address, but the journalizing filter appear only on Customer table and this option is disabled for Address automatically.
Now I want to create a package using OdiWaitForLog event detection. Is it possible to put all these 10 interfaces in just one package to populate the target tables? It works fine when I have only one interface and I use the name of one table in the interface for Table Name parameter of OdiWaitForLogData event, but when I try a comma seperated list of table names[Customer, Address] this error happens
java.sql.SQLException: ORA-00942: table or view does not exist
and if I use this method <%=odiRef.getObjectName("L","model_code","logical_schema","D")%>, I get this error
"-CDC_SET_NAME=Exception getObjectName("L", "model_code", "logical_schema", "D") : SnpLSchema.getLSchemaByName : SnpLschema does not exist" "
Please let me know how to make it work?
Do I need to create separate data models each including only those tables which appear in their corresponding interface and package? Or do I need to create multiple packages each with only one journalized interface to populate only one target table?
Thank you for your time in advance.
Regards,
Neel
Maybe you are looking for
-
Can you have an apple id just for iMessage
We have an iPad and my son has a touch. They're both under 1 apple id so when either one of us iMessages the other can read the messages. I like that I can read his (he's 9), but I don't want him to be able to read mine. Plus, he doesn't know the
-
How To Restore or Reinstall Firmware for Macbookpro11,1?
I have a MacBook Pro 11,1 and wish to restore and/or re-install a fresh copy of the firmware. There used to be a Restoration CD to do this, but one has not been publish by Apple since Macbookpro5,1. Any help in understanding how to do this? Thank yo
-
I just received a new tech movie form Europe. It's a .mpg file which opens and reads fine in QT. However, the file is HUGE, 236MB, and I would like to link it to my website where people will be able to view via streaming. Now I have other QT files wh
-
What is part number number for 19" rack mount on 526 controller
I am looking for part number for the rack mount kit for a 526 conbtroller - nono is listed on the price sheet
-
Password expiry tracking report
Hi, Appreciate anyone can help me. I have change the password expiry setting in the RZ10, from 30 days to 60 days. Is they any report tracking to check on the password expiry upon reset the password instead of counting it manually?Can we get this inf