CIF: When multiple regions work on same SCM and ECC box

Hi All
We have a situation where North America and Europe use the same SCM and ECC box. Currently SNP/PPDS is live in Europe only. So ,before taking the network/deployment optimizer run,we stop the CIF using program RSTRFCI1. This stops the CIF for whole SCM box. Now we plan to go live with SNP for North America. Hence we can not use RSTRFCI1 as it will stop CIF for both North America and Europe.
Question is: How can we stop CIF for particular region/integration models etc ?
We know, we can deactivate/activate the integration models every day but we do not have this kind of window available.
I am sure some of you must be working on this kind of scenario. Your suggestion and solution would be highly appreciated.
Regards
Pradeep

Hi pradeep,
You have different options to do that.
1. Remove distribution difinitions for North America DC's and plants. Deactivate the intigration models ( Only activate Europe locations in the integration models).
2. In OLTP settings Deployment and heuristic orders set periodic transfer and when sending them to ECC through /SAPAPO/C5
restrict as per source or destination locations.
3. Run heuristcs through selection profile where only select the locations whichever relevent to Europe.
Regards,
Kishore K Reddy

Similar Messages

No disconnect warning when multiple remote users use same username and password to logon to VM

I created a single user account to be used by multiple users to access a system consisting of multiple VMs. The problem is that when User #1 has an active session and User #2 attempts to log onto the same VM User #1's session is ended without
warning. Now if User #1 has an active session and User #2 attempts to log onto the same VM using different credentials a [Remote Desktop Connection] dialog displays alerting User #1 that User #2 wants to connect and gives an option to disconnect or stay connected.
Realizing that the latter preferred behavior is because the two Users are using different credentials I would like to know if the same preferred behavior of alerting the Users of active connections can be enabled for instances when both Users are using
the same credentials - perhaps by recognizing that their remote ips are different or something.

not sure if this fits your case exactly. there was another similar question asked in the forum and the solution was:
You may set this via group policy, for example, in the server's local policy using gpedit.msc:
Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Connections\
Restrict Remote Desktop Services users to a single Remote Desktop Services session Disabled
http://social.technet.microsoft.com/Forums/windowsserver/en-US/a26af954-c2ef-4beb-b892-9e7717518850/allowing-users-to-open-multiple-remote-sessions-on-windows-server-2012-rds?forum=winserverTS

Is it possible to search for multiple folders with the same name and...

Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Safari 5.1 not loading MOST of the times. like 1 in 100 attempts it works fine, and that too, as long as you work in same window. and what's the webkit2webprocess.exe file?

safari 5.1 not loading MOST of the times. like 1 in 100 attempts it works fine, and that too, as long as you work in same window. and what's the webkit2webprocess.exe file?

the webkit2webprocess.exe has something to do with the sound. Safari works fine for me, except for the occasional time when the webkit2webprocess.exe crashes. Sometimes it crashes Safari altogether but sometimes it just reloads all the tabs I have opened. Either way, it's a huge pain. I hope they fix it with an update soon.

How do I use icloud to restore my documents that were in Pages? Pages got stuck in "waiting" to update and when nothing else worked I deleted it and reloaded Pages. I don't want to restore everything just my Pages documents.

How do I use icloud to restore my documents that were in Pages? Pages got stuck in "waiting" to update and when nothing else worked I deleted it and reloaded Pages. Everything I can find is about wiping everything out and restoring everything. I don't want to restore everything just my Pages documents (and numbers and keynote that also locked up during updating).

What I meant is turn off Documents and Data in iCloud in OS X. Keep it on on your iOS devices. iCloud will sync documents between the iOS devices and make them available on the iCloud web site, but it won't mess up iWorks' open and save dialog boxes. It also won't assume that you want all your documents in iCloud, which I think is undesirable anyway.
Keep iOS and OS X separate, and use the web site to move files between the two as necessary.
iOS iWork is different from OS X iWork. There are fewer fonts on an iOS device. iOS iWork programs have slightly different feature sets than OS X iWork programs, and the file formats are different. iCloud automatically converts the file format when necessary, but if you make a habit of saving things directly to iCloud, you are limited to the lowest common denominator between the two versions of iWorks. So why would anyone want iWork on the Mac to open and save documents on iCloud by default?
If you want to store files in the cloud and sync them on your Macs, SugarSync is a much better solution. It lets you choose your sync folders, it doesn't make you reorganize your files, it lets you sync all file types, it doesn't convert files to a different format and back, and it stores everything in the cloud, too. Just the simle act of saving a file backs it up and syncs it. I wouldn't live without it. iCloud is best with iTunes purchases and synchronizing Mac settings and iOS files; I woudln't live without it. The two make an unbeatable combination.

When silverlight will work in windows 8 and windows 10

when silverlight will work in windows 8 and windows 10?

Hi,
I'm using windows 8.1,silverlight 5 works fine on my machine.
If you want to know if silverlight can works on windows 10 , you should wait for microsoft's offical statement.
Learn more about silverlight comaptible system,please check link below:
http://www.microsoft.com/getsilverlight/get-started/install/default.aspx?reason=unsupportedplatform
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to make multiple portals work in same domain (wlp 9.2)? IMPORTANT !!!

We have domain where one portal application is in production now and other portal application have to deploy in the same domain.
The first one is using global scoped DataSources and the new one is using application scoped because they have to use own schemas in the database.
Also Group and User/role management have to work application scoped, meaning that in one's portal admin console shows only users/groups/roles to that portal.
How do I do this and what is the optional/best practises to do this kind of configuration, configure and deploy multiple portals in the same domain ?
I get so far that I make new SQLAuthenticator and XCAMLRoleMapper to the new portal but when the LDAP and database goes out of sync and I delete P13N -tables and LDAP, server start creates only to the first portal database the needed rows and delegated admin management doesn't work in the new one at all.
I have read all bea's documents related to JDBC - application scoping, deploying, security P13N and I can't get enough information from it to make this work.
Thanks !

You may want to ask in the weblogic.developer.interest.portal forum.
I don't believe that group and user/role management can be application
scoped.
<Tanja Puurula> wrote in message news:[email protected]..
We have domain where one portal application is in production now and other
portal application have to deploy in the same domain.
The first one is using global scoped DataSources and the new one is using
application scoped because they have to use own schemas in the database.
Also Group and User/role management have to work application scoped, meaning
that in one's portal admin console shows only users/groups/roles to that
portal.
How do I do this and what is the optional/best practises to do this kind of
configuration, configure and deploy multiple portals in the same domain ?
I get so far that I make new SQLAuthenticator and XCAMLRoleMapper to the new
portal but when the LDAP and database goes out of sync and I delete
P13N -tables and LDAP, server start creates only to the first portal
database the needed rows and delegated admin management doesn't work in the
new one at all.
I have read all bea's documents related to JDBC - application scoping,
deploying, security P13N and I can't get enough information from it to make
this work.
Thanks !

Multiple people working on same instance

Can two people work on same instance at the same time. If one user makes the change and resfreshes the page, he sees the changes made by other user?
Edited by: JoshMachine on Jul 8, 2009 9:00 AM

Hi,
Are you sure you want to go the Split-N (now called "Multiple" in Oracle BPM 10g) route? From your earlier thread, here's what I think you're trying to do:
Just to clarify again - (1) One guy has a task assigned to him
- (2) He assigns same task ( creates duplicate copy ) and assigns to some else in different role.
- (3) Now both should edit the task , meaning if one changes the tasks , other person should see it as well.>
I'll typically use a Split-N when I have a dynamic number of copies I want to create that is determined at runtime. Examples include:
a) you form an adhoc committee of people in a role and you want them to approve disapprove a proposal and you determine who's on the committee and the number of people on the committee at runtime.
b) you have a request for quote from a variety of different suppliers and if it's a large order you send out x number of requests to suppliers and if it's a small order you send out y number of requests to suppliers
c) you have a batch of things (e.g. healthcare claims) represented by one work item instance and you want to have workers treat the individual claims as single work items inside the same process (a single work item might have 100 claims that would spawn 100 work items).
If you're still thinking you need to use a Split-N activity, this thread explains how to use it: Re: multiple-join: get value of each participant
I could be wrong, but I think you might be better served if you use a Split activity and not a Split-N.
For your use case it sounds like you'd have two transitions coming out of the Split activity.
To meet your first criteria ("One guy has a task assigned to him"), one transition would go to an Automatic activity where the original person is assigned the copy of the original instance (use "next.participant" feature to assign it to him). Following this Automatic activity, it would flow to an Interactive activity where only the original participant could edit the work item instance.
To meet your second criteria ("He assigns same task ... and assigns to some else in different role"), you need to add a second transition that would go to an Automatic activity where the second person is assigned the copy of the original instance. Following this Automatic activity, it would flow to an Interactive activity where only the second person could edit the work item instance.
Both Interactive activities would have a transition to the Split's Join activity.
To meet your third criteria ("Now both should edit the task , meaning if one changes the tasks , other person should see it as well"), right mouse click the Split activity -> click "Properties" -> click "Advanced" on the left side -> uncheck the checkbox beside the text "Generate independent Copies". Now if one edits their copy, the other will see the change reflected.
The only concern I have with this approach is a bug I encountered last week when I turned off generate copies in a Split using Oracle BPM 10g. In 10g, I noticed that the instance remained locked occasionally after one of the participants "touched" the instance. Once locked, I could not invoke the copy again. It did not happen every time, but often enough where I decided to work around the new 10g bug by leaving the property set to generate copies and writing to an outside database table once one of the people edit it and reading from the same outside database table before someone edits it.
Hope this helps,
Dan

Book file & Dropbox: Multiple people working on same book file

I am trying to use the book file and have run into multiple issues. We have saved the book file and all relevant InDesign files on dropbox. There are two of us who work on the book file at the same time. We have the book file open together but work on different files from the book, never working on the same file at the same time.
A few of the issues we have run into are as follows:
1. The book file does not show the InDesign files the other person added, when opening on a different computer.
2. When saving the book file, from the panel, it will tell us someone else saved the file and if we want to overwrite their file.
3. When working on of the files from the book and I try to save the file (ctrl+s) I get error messages telling me the network connection was modified by another process. InDesign then has en error message it needs to shut down and start back up to recover documents. After it starts back up it can't recover document due to error(11).
Has anyone used the bookfile with a cloud service, while multiple people work on different files for the book? For example, we want one person to work on the files 1-5 and another on 6-10 for the book file at the same time.

Only one person can work on a book file at the same time.
You cannot work this way on the files.
Person A adds a file to the book
Saves
Person B adds a file to the book
Saves
Persons B version overwrites Person A file.
Consider giving 1 person the duty of updating the Book File.
Only 1 person can work on a file at the same time - consider splitting files you're working on into folders
Folder>Person A
Folder>Person B
Add files that person should be working on.
Person in charge of updating the book file will update from both folders.
The way you're working will not work.

Multiple people working on same iWeb domain.

I am trying to rebuild my site after upgrading to iWeb'08 and would love to be able to have multiple people work on different areas of the site to speed up the process. How do I sync them back without loosing links. Can I ever have them exist in one file again. I believe that I can manually publish to folder then put them all in same folder.
If there is any advice you guys can give would be greatly appreciated.

Advice?
Don't try it.
You would need multiple versions of the Domain.sites folder created by iWeb and there is no way to merge them into just one file.

Multiple person working on same planning area

Hello,
Can anyone please suggest how multiple people can work on same planning area at the same time. We are working on implementation project and our team has to work on different planning levels in the same planning area. But locking prevents us to achieve the same.
Any ideas?
Regards

Hello,
Regarding the change of the Area itself, it looks logic that two person cannot change its design at the same time.
If I remember well if somebody is changing the Area, then everything is locked. But it is not the case if two person are working on separate Levels.
A very important thing (correct me if I'm wrong) is that if you have been in change mode of an Area, Level, Package, etc... in your current BPS0 session, you will still lock it untill you get out of BPS0.
Then, if in your team everybody knows on wich level they have to work and then don't go in change mode of other elements it should work (but not for the area because it contains all the subelements...).
By the way, check also <a href="http://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=635244">Note 635244 - Locking transaction data in SEM-BPS</a>:
<i>Two parameters are only designed to facilitate the Customizing process, if users
carry out Customizing in transaction BPS0 within a project.
o SEM_BPS_NO_LOCK: This parameter has the effect that transaction
data is not locked at all. Never use this parameter in a production
system. As of Support Package 14 for Release 3.1B, parameter
SEM_BPS_NO_LOCK is released by an additional switch in table
upc_dark2: For this purpose you have to maintain a record with
param = ENABLE_NO_LOCK and value = X in table upc_dark2. Only then
the system includes parameter SEM_BPS_NO_LOCK. The parameter can
then be useful if you want to test functions or the manual planning
with 'test data' in Customizing.
o SEM_BPS_SAVE_UNLOCK: This parameter only works in transaction BPS0;
it has the effect that the system unlocks data (if possible) after
it has been saved. Therefore, the system only simulates an exit and
reentry in transaction BPS0 with the last active detail
application. Therefore, the above parameter can be helpful if many
people work on Customizing in transaction BPS0, because objects can
be unlocked earlier.</i>
You can add these parmeters to a user id in the "Parameter"tab in T-Code SU01.
Best Regards,
Jeoffrey

Multiple Users working on same Model

Hi
In a Multi user environment if a particular Modle is being worked by many user at the same time, what is the impact.
Will it give a Problem or all changes can be saved?
Thanks & Regds
Ravi

Hi Ravi,
Although multiple users can access the same database and same group folder simultaneously, only one user can access a particular model at a time. The subsequent users who tries to open a model which is already opened by a user, they get a message that the model is in use by that user.
Only the first user who has opened the model can make changes to the objects / properties of the model. The users who have subsequently opened the model, will have Read-only access to the model. They can however view the changes to the model, if the first user is making the changes simultaneously, by pressing the 'refresh' (F5) button regularly.
In a few scenarios (like certain EPC type models), I have seen that the users who have opened the model already in use also are able to capture changes to the object properties. But, they are unable to save the changes.
Regards,
K.C.

How do you have multiple iPhones, on the same computer, and on the same iTunes log in?

My wife has the iPhone 4 and rarely syncs (1 time in the last 6 months) to our PC, so I updated her phone when she synced. I have the iPhone 4S and sync everyday to the same PC and same iTunes account. She synced her phone to our PC yesterday and all of my info is now showing on her phone (apps, pictures, etc) ... I have researched and do not see a solution on how to fix this?

First thing to do is make sure each device has a unique name. You can change the name displayed in iTunes by connecting the iPhone to iTunes and double clicking on the name of the device.. Then type a new name. Wife's iPhone and dads iPhone for example.
Then when you sync a device be sure to carefully select those items you want on that device and deselect those items you don't want. After you have made the selections you want click on Sync or Apply.

Installing multiple copies of the SAME service on a BOX

This is a "Best Practice" question for BOE-XI (3.x).
I have dug through the 3.1 DEPLOYMENT training, Admin and Pattern documents, but none of them clearly discuss anything around installing multiple copies of the SAME service (eg. CMS, ReportJob) on the same physical server if it has more that 1 CPU.
The documents detail the "per CPU" limits of a service, but don't detail if we should install multiple services to take advantage of the multiple CPUs available on a specific Physical Server.
For example - the Crystal Report Job Server can support five (5) simultaneous report jobs per CPU by default.
If we have a 2 CPU machine, do we run one (1) CRJS service - but increase the "Maximum Jobs Allowed" setting to Ten (10), or do we install two (2) CRJS services each with a default limit of Five (5)...?
Does this rule apply to all services including the One (1) CPU for One-Hundred (100) simultaneous requests sizing-limit on the CMS..? That doesn't appear to be a setting we can control within the CMC.
Can you run more than one CMS service on a specific Physical Server...?
Thanks in advance for the advice.

I personally have run 20 jobs per Crystal Job server and most were dual processor dual core. I had over 1000 jobs a night, but not all at 1am...although most were within 2 hours of the same time.
I was able to get through them. However, I had 4 Crystal Job servers. Its all about your hardware being taxed.
I broke off my CMS away from the processing tier. So I could have multiple Crystal Job servers.
We had 3 processing tier servers all doing Crystal Jobs and Webi jobs. I had 60 running at one time for Crystal. 20 per job server.
i could have added the Crystal job servers to the same server, but the hardware was getting busy.
I would have at least 2 CMS's as they support 500 concurrent users (Sessions?) each.
This helped us - and we had over 8k reports in our repository. We were getting bound by memory constraints.
Once you get to 64 bit OS and App, (BO XI 4.0 sometime in 2010) it will help with this problem.
The only other way in the 32 bit environment is to add servers, even VM's if you have to as long as they are different hosts, but that adds expensive BOE CPU licenses - the big caveat to that.
That's how we solved the problem...

PPR bug when multiple regions share same iterator ?

Hi,
I have a page with a table binded to iteractor X.
This page has a region binded to a bounded taskflow Y.
Taskflow Y has a fragmented view with a form Z binded to iterator X.
Form Z has a create button which fires the CreateInsert operation on the iterator X and has immediate = false because I want to execute validations on the current record
Taskflow Y has the <data-control-scope> set to shared.
On both views pagedefs the iterator X has the property ChangeEventPolicy="ppr"
User case 1: If table is not empty (iteractor X has a current row value), when I press the create button, the form Z refreshs with a new record and the table is refreshed with an empty record as well.
Use case 2: However, if the table is empty (iteractor X has no current row value), when I press the create button, the form Z refreshs with a new record and the table is refreshed with an empty record as well but, somehow, the page fires another page refresh which causes the form Z to process validations and show errors on mandatory fields.
Notes:
- I cannot use PartialTriggers because the fragment region does have references to table components on the main page
- I could use contextual events however PPR on iterator X and sharing data controls between the region taskflow and calling page should be enough because use case 1 works.
Any ideias ?
Thank you in advance.
Edited by: Paulo Moniz on 18/Dez/2011 12:10

Thanks Frank
Yes, that was one of the first things I did but somehow the region does not know its contents were refreshed in order to fire partial triggers. Here is the source code:
Of the table:
<af:table value="#{bindings.EbaErpSuppliersInvoices.collectionModel}" var="row"
rows="#{bindings.EbaErpSuppliersInvoices.rangeSize}"
emptyText="#{bindings.EbaErpSuppliersInvoices.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.EbaErpSuppliersInvoices.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.EbaErpSuppliersInvoicesQuery.queryDescriptor}"
queryListener="#{bindings.EbaErpSuppliersInvoicesQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.EbaErpSuppliersInvoices.collectionModel.selectedRow}"
selectionListener="#{bindings.EbaErpSuppliersInvoices.collectionModel.makeCurrent}"
rowSelection="single" id="t1"
binding="#{backingBeanScope.backing_Views_Erp_SuppliersInvoicesList.t1}" displayRow="selected">
</af:table>
Of the region:
<af:region value="#{bindings.supplierinvoiceformbtf1.regionModel}" id="r1" binding="#{backingBeanScope.backing_Views_Erp_SuppliersInvoicesList.r1}" partialTriggers="::pc1:t1"/>
Of the btf:
<?xml version="1.0" encoding="windows-1252" ?>
<adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
<task-flow-definition id="supplier-invoice-form-btf">
<default-activity>SupplierInvoiceRecord</default-activity>
<data-control-scope>
<shared/>
</data-control-scope>
<managed-bean id="__8">
<managed-bean-name>mbSupplierInvoiceRecord</managed-bean-name>
<managed-bean-class>mbSupplierInvoiceRecord</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
<view id="SupplierInvoiceRecord">
<page>/Views/Erp/SupplierInvoiceRecord.jsff</page>
</view>
<use-page-fragments/>
</task-flow-definition>
</adfc-config>
Edited by: Paulo Moniz on 19/Dez/2011 9:18
Edited by: Paulo Moniz on 19/Dez/2011 9:19

CIF: When multiple regions work on same SCM and ECC box

Similar Messages

Maybe you are looking for