Cifing the products

I have implemented the user exit APOCF005 for extending the products to regional locaton 'NA'. If i activate a model with materials not present in APO but are present in R/3 then will the user exit gets triggered after the products are extended to the locations defined in R/3 or will it get triggered before that.

I am an ABAPer . Thanks i figured it out myself.

Similar Messages

How do I use the product formula in Numbers? I want to calculate the product of three numbers? In Excel it is simply calculated as '=b4*b5*b6.' How do I do this in Numbers? I cannot figure it out, and I can't type in the Excel type formula.

Can someone tell mr the steps to write a formula to calculate a product of the cells? I cannot figure it out.

You double click the cell the product is to be placed in.
Then click the "=" from the little bar that appears above the numeric keyboard.
Then click cell B4. That should place its reference in the bar to the right of the equal sign.
Then click the "x" from the function guide next to the numeric keypad.
Then click cell B5.
Then click the "x".
Then click cell B6.
Finally click the green check mark on the right. Done.

My Olympic camera SD card doesn't fit into the SD card camera reader. Apple advised me to purchase the product in order to import photos to my IPad.

My Olympic camera SD card doesn't fit into the SD card camera reader. Apple advised me to purchase the product in order to import photos to my IPad. How do I over ride this problem. How do I import photos from an Olympus FE-340 directly to my IPad?

Your camera uses an OLympic XD picture card http://www.amazon.com/Olympus-xD-Picture-Memory-202332-package/dp/B002LC2DQ4/ref =pd_sim_sbs_p_1 This card has different dimensions compared to an SD card.
You should be able to plug the cable that came with your camera into the camera connection kit to import the pics.
 Cheers, Tom

I have had adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

I have had adobe creative suit 6 design standard for 2 years and all of the sudden it would not open. I do not have the windows disc anymore however i still have the product code, number and serial number. is there anyway to get my photoshop back?

uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
for the installation file(s):
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How the material PRT issue/receipt to the production order can be handled?

Hi PP Gurus,
        For one of our clients, the handling of PRT is to be controlled with the issue/receipt for the production order.
1. What is the procedure for issue/receipt of PRT material in the SAP?
2. What is the procedure to block the PRT for the creation/release of production order when it was already assigned to the other production order during the same time?
3. The PRT is to be available automatically once the assigned production order operation is confiremd.How it can be handled in the SAP?
Appreciate your early response.
Thanks,
Reddy.

Hi Ramanujam,
        Thanks for your response.
     1. The dies can be used for the production of Pressing, Casting and Forging etc. These dies will be managed in the stores. The stores representatives will issue the die to the shop floor for an operation of a production order.They will return back the die once the production is completed at that operation using the die. How to map this process in the SAP.
        Typically, these dies can be treated as PRT materials in the SAP system.
     2. OPJK configuration is not sufficient. The same PRT will be assigned to the many production orders during the same time.The system won't block with only this setting. There are some other steps involved to complete the process.
                 I would like to know the complete procedure with all the steps to block the PRT once it was assigned to the production order operation. The same PRT is to be available for other production orders automatically once the operation is confirmed after production.

Unable to open the Production Order

Hi All,
there is a message error while trying to open the Production Order using tcode CO03. The message is "User AA is currently processiong order 123456".
User AA is already log-off from the system, but still giving the same error message.
How to solve this problem?
Thanks.

Hi,
Logically to display any document it may not resttrict even though same document is using by other user it may only allow yout display rather to change......but also try the below way it may help you.
Just re login in user AAA and select the first radio button "continue with this login and end other login" and then login from your USER ID and try to display the production order through CO03.
BR

Open the reservation for the Production order

Hi,
I have post the GI for Production order MB1A with movement type 261 from 100 peaces components. I would like to cancel a partial quantity of components from this posting (about 30 peaces). After cancel it the reservation for the production order has to be open for 30 peaces of components.
I've canceled it through MB1A and mtype 262 but the reservations weren't open and in the PO (component overview there is always the sign"the Final Issue for This Reservation").
Which T.code and mtype could I use.
Thanks
Dede

Hi,
Have you cancelled the movement (of 30 pieces) by selecting the "with reference" option from the menu?
If not, then reverse the current cancellation document. Then again cancel the 261 movemtn by selecting the with refernce button from the menu. It will sove the problem.
Check & revert.
Regards,
Rohit.

Confirmation of the production order qty equal to sales order qty

Hi Experts,
I need to control the confirmation of the production order should be equal to sales order qty.
I'm having the scenario as follows
If sale order qty for X material = 3
while running the MRP, system will plan the order qty as 8 because of we maintained rounding profile in the Material master and enhancement we used for this.
Rounding Profile Qty=5
Total Production Order Qty=8.
But, finally they will do the GRN for sales order qty only, remaining will be used for testing purpose.
So, the confirmation also has to happen for only sales order qty. There, we need to control the qty based on the sales order.
Is there any exit or Enhancement is available for this.
Please help me.
Naren

Hi,
Exit for confirmation check is CONFPP04.
However, opening orders for quantities higher than demand and leaving pieces undelivered and unconfirmed in production orders does not make sense. I could not get the requirement of incresing production quantity by adding rounding value? Moreover, if rounding is to be used for test purposes, why not do you receive them into stock? Why don't you receive 8 pieces into stock, deliver 3 pieces to sales order and transfer 5 pieces to related department?
If it is because of MRP and you really do not want to produce extra 5 piece immediately, you may use material reservation or any other form of demand for 5 pieces, use EX for lot size calculation and have MRP create two planned orders for sales order and testing requirement, then you can convert planned order for sales order requirement into production order and continue processing.
Regards.

Regarding the product time capsule...is the modem the same as airport extreme and is the disk drive always running? I'm worried about it lasting for at least five years.

Regarding the product Time Capsule... is the modem the same as the Airport extreme and is the disk drive always running??? I'm worried about it lasting at least five years.

John,
I'd pay good money to bet it wouldn't last 5 years... I don't rate the in built power supply and as for "server grade hard disk" - Hmmmm..... The failure rate of all HD's on the market after 3 year is 60%.
Regards,
Shawn

SSO issue in the production server,com.sap.mw.jco.JCO$Exception: (103)

com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: This system rejects all logons using SSO tickets
in the production server.....
while testing the jco maintained for Ess applications.
if i go for uidpw method for modeldata destination i am getting the error. in the Ess pages that administrtor not in this peroid(administrator with which id i maintained jco destination)
if i assign one employee to the admin in pa30......for every employee getting the same details of admin)
I guess this problem with modeldata ......i should maintain the usermanagement method for modeldata jco destination is logon ticket.
while maintainig that ping is successfull but getting the above error.
it is the problem with production server.......of E.P
in dev and quality everything is working fine.
plz help me out.
thankyou
swapna

Hi Swapna,
Please check the logon group properties for SAP system in t-code SMLG. If there is any issue with logon group then it might cause for this issue.
Refer to [Click here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/7.0/portal%20integration/how%20to%20configure%20the%20jco%20destination%20settings.pdf] and [System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true]
Hope it will helps
Regards, Arun Jaiswal

Report to Generate Materials Used for the Production of FG/SFG Materiak

Dear Experts,
I am working for a Cement Factory. CLINKER is a SFG used for the production of FG Cement.
RMOPCK1 and FINECOAL are another SFG used for the Production of CLINKER
RMOPCK1
+ = CLINKER + (Different Materials) = CEMENT
FINECOAL
For CLINKER we will create process order every month similarly for RMOPCK1 and FINECOAL.
RMOPCK1 is using 5 Raw materials and FINECOAL is using 1 raw material
Limestone + Silica 1 + Silica 2 + Bauxite 1+ Ironore 1 = RMOPCK1 and
Rawcoal = FINECOAL
All the raw materials, SFGs are used for creating different variety of cement.
I want to know for a certain period how much is the CLINKER produced and How much is the raw materials used for producing the CLINKER.
When i try through KOB1 with the process orders for CLINKER it is giving me total usage ofr RMOPCK1 and FINECOAL for producing the CLINKER.
I Want to know for ex:
the quantity of raw materials (Limestone + Silica 1 + Silica 2 + Bauxite 1+ Ironore 1 )used for producing ex: 1000 TON of CLINKER.
Please help. Thanks
Edited by: simonjohn on Oct 9, 2011 6:46 PM

Thanks

Error installing Office 2013 on Server 2012 R2 RDS - Error 25004: the product key you entered cannot be used on this machine

Hi there,
I really hope someone can help me as I am tearing my hair out trying to get this resolved!
I am working on a Server 2012 R2 server with RDS running. Before it was turned into a RDS server it had a copy of Office 2010 running as a trial to see would it work for the accounting package that is running for users via Remote Desktop. Trial worked ok
so it was converted into a RDS server. Now, as its a RDS it needs to run Office under a volume licence, which I have. However when trying to install I get the message: "Error 25004: the product key you entered cannot be used on this machine. this is most
likely due to previous Office 2013 trials being installed on the system."
In summary I have tried everything I can think of and find to remove all traces of the old Office from the machine but still this message persists. I have run the Fix It For Me uninstall from MS and it cannot find any Office installed. i have manually searched
through all of the Windows directories including Program Files and AppData and removed all traces of Office from there, I have searched the registry and removed all I can find from there.
Where or what file does the installer look at to see that a previous version was installed?
I cannot scrub this machine which I would have done long ago because there is another SQL Server based application running on it.
Really really appreciate anyone that can help me on this,
Thanks

Hi,
I have definitely heard your frustration, and I’ll try my best to help you.
Since Office 2010 installed on it before, you need to remove Office 2010 completely.
KB about this error:
http://support2.microsoft.com/kb/2792178
A similar issue is addressed here. Although this method is based on Office 2010, but we can have a try:
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Q_28475448.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Sales Order Schedule line not populating in the Production order

Queation: Is there a way to tell the system to look at the sales order, line item AND schedule line. It is displayed in MD04 but it doesn't carry over to the Production Order. We are a MTO and this information is relevant in a number of ways.
Please Help.

Vickie,
If you are using MTO scenario then when you run the MRP for the material, it will create a planned order for that sales order based on the dates calculated from the sales order schedule line (Shipping tab)...
So now when you convert the planned order to production order, all the sales order details will get copied.
try and revert back.
Swapnil

Crystal Report doesn't run on the production PC

I developed a report using VS 2005/Crystal Report. The report has three on-demand sub reports and some subreports. It runs well on my PC, but doesn't run on the production PC, on that PC, I only can see the report header or few columns. The difference (I can tell) between my PC and the production PC is my PC has VS 2005 installed.
Is there anything I can do to make the report running on the production PC?
Thanks.

Hi Jhon,
Have you installed the runtimes of CR of VS2005 on your server, if not than please install from(only applicable if you are using the bundle version of CR i.e. CR 10.2 which comes with VS 2005) [here|http://resources.businessobjects.com/support/additional_downloads/runtime.asp#07].
Note- use the appropriate version of merge modules for 64 or 32 bit machine
hope this works
Regards,
Amit

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

Cifing the products

Similar Messages

Maybe you are looking for