CIFS Kernel Module Needed for A7600-F. Can't mount CIFS Shares.

Does anyone have, or could compile a CIFS Kernel for the A10 (A7600-F) please.
I am trying to mount CIFS shares on my NAS, nut don't have the cifs.ko file required.
Help would be greatly appreciated.
Thanks.
Model Number: Levono A7600-F
Android Version 4.4.2
Kernel Version: 3.4.67
Build Number: A7600F_A442_000_022_140829_ROW
The tablet was rooted using Kingo Root.

Hi Gmarkall,
You really seem to know what you're doing.
I need the same module files for my A10-70 (A7600-F).
Are you able to complie these please?
Lenovo make the source code available here
http://support.lenovo.com/gb/en/products/tablets/a-series/a10-70-tablet?TabName=Downloads
I've tried to do this myself, but can't figure it out.
Can you help me please?
Thanks
Moderator comment: This post and its replies below were pulled out of an old thread about a different model and merged here. Subjects here and below edited to match. Was: Re: CIFS Kernel Module? - can't mount CIFS share on IdeaPad A2109

Similar Messages

CIFS Kernel module for Ideatab S6000L

I just bought an Ideatab S6000L and I tried to mount my share as a local folder using CIFS. After some research it seems some modules are missing. I tried with modules from other version (for example in this topic http://forums.lenovo.com/t5/Idea-Android-based-Tablets/CIFS-Kernel-Module-can-t-mount-CIFS-share-on-...
It didn't work and I don't know how to build thoses modules for this specific version, could someone provide me thoses modules or help me to build them please?

Thank you for your response
I'm thinking of returning my tablet, this is something I really needed.
So in summary, all of the lenovo tablet have this problem and the module can't be built on some of them?

Can't mount cifs unit after update to kernel 3.4.2.2

Hi,
After upgrade to kernel 3.4.2.2 I can't mount some cifs units. I get this error in dmesg:
[ 548.993302] CIFS VFS: Connecting to DFS root not implemented yet
[ 548.993417] CIFS VFS: cifs_mount failed w/return code = -22

mgmartins wrote:
Yes, but I have no "noatime" option include in my fstabs :'(
kimera wrote:Here it works removing "noatime".
Don't ask me why, I've found it here: https://bbs.archlinux.org/viewtopic.php?id=143387
Problems here as well. My error.log shows....
Jun 25 18:58:02 localhost kernel: [ 34.904637] CIFS VFS: Connecting to DFS root not implemented yet
Jun 25 18:58:02 localhost kernel: [ 34.914335] CIFS VFS: cifs_mount failed w/return code = -22
Jun 25 19:07:03 localhost kernel: [ 32.279555] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
My fstab entries also do not have noatime.
FYI, my NAS is a dns-323.
Any assistance would be gratefully accepted, in the mean time I'll just mount using sshfs :-(
Last edited by lambretta (2012-06-25 12:30:44)

This server does not have the module needed for interpreting traces

I wan to use the Trace Control function of the Exchange Troubleshooting Assistant. I specifically want to look at the transactions of a particular user. When starting the function I get the message, "This server does not have the module needed for interpreting traces." I find nothing to tell me what the module is or where to get it.
Specifically, I have a Macintosh user (bigwig in my organization) that insists on using Apple's 10.6 Calendar program, and constantly complains that his calendars are different between his 3 Macs and his iPhone. He claims to have put a calendar item on one machine, now it appears nowhere. And I have no way of proving what is going wrong. He hates Outlook and refuses to use it, he hates Entourage and refuses to use it. The local database for Entourage kept getting fouled up to the point that we kept having to delete this account and readding it to force the recreation of the database. The database tool never fixed the problems and of course he did a lot of customization that got destroyed every time we deleted the account settings and added them back.
I really want to run the tool for a while and see if there is actually some transaction actually happening on the server side, so I would like to have these traces and be able to view them.
SnoBoy

See
http://blogs.msdn.com/b/dvespa/archive/2011/05/27/how-to-use-extra-to-troubleshoot-rpc-client-access-issues.aspx.
Just click on ok and proceed with set trace manually.
Svetozar Petrović

[SOLVED]Can´t mount nfs shares!

Hello,
I am trying to get up a fileserver. I installed an old PC with Arch and configerd it over SSH. I followed the wiki over NFS and NFSv4. But everytime I want to mount a share that is in the physical map /home/jozef/shares/downloads, I get the following error:
mount.nfs4: timeout set for Mon Aug 24 14:36:57 2009
mount.nfs4: text-based options: 'clientaddr=192.168.0.100,addr=192.168.0.111'
mount.nfs4: mount(2): Permission denied mount.nfs4: access denied by server while mounting 192.168.0.111:/shares/downloads
I tried to mount it with the following command:
mount -v -t nfs4 192.168.0.111:/shares/downloads /media/Downloads-Server
Lets call the fileserver fileserver and my workstation Gamepc. Here I will give you some files that I think are needed, from fileserver and Gamepc are there other files you need, I will post them.
/etc/exports on fileserver
# /etc/exports
# List of directories exported to NFS clients. See exports(5).
# Use exportfs -arv to reread.
# Example for NFSv2 and NFSv3:
# /srv/home hostname1(rw,sync) hostname2(ro,sync)
# Example for NFSv4:
# /srv/nfs4 hostname1(rw,sync,fsid=0)
# /srv/nfs4/home hostname1(rw,sync,nohide)
# Using Kerberos and integrity checking:
# /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt)
# /srv/nfs4/home gss/krb5i(rw,sync,nohide)
/shares 192.168.0.12(rw,fsid=0,no_subtree_check,async,no_root_squash)
/shares/downloads 192.168.0.12(rw,no_subtree_check,async,no_root_squash,nohide)
/etc/hosts.allow on fileserver
# /etc/hosts.allow
sshd: 192.168.0.0/255.255.255.0
#nfsd: 192.168.0.0/255.255.255.255
#portmap: 192.168.0.0/255.255.255.255
#mountd: 192.168.0.0/255.255.255.255
nfsd: ALL
portmap: ALL
mountd: ALL
# End of file
/etc/hosts.deny on fileserver
# /etc/hosts.deny
ALL: ALL: DENY
# End of file
/etc/conf.d/nfs-common on fileserver
STATD_OPTS="--no-notify"
/etc/conf.d/nfs-server on fileserver
STATD_OPTS="--no-notify"
/etc/rc.conf on fileserver
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK=""
USEDIRECTISA="no"
TIMEZONE=""
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="dhcp"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !network rpcbind nfs-common nfs-server netfs crond !xinetd !samba sshd transmissiond)
/etc/rc.conf on Gamepc
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Amsterdam"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="GAMEPC"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="dhcp"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !network rpcbind nfs-common @netfs crond @hal @fam @samba @alsa @cups)
/etc/hosts.allow on Gamepc
# /etc/hosts.allow
sshd:ALL
# End of file
/etc/hosts.deny on Gamepc
# /etc/hosts.deny
ALL: ALL: DENY
# End of file
If someone could help me, I would be pleased.
With kind regards,
Jozef00
Last edited by jozef00 (2009-09-01 15:28:07)

Are you sure that the nfs module is loaded? Do
lsmod | grep nfs
to check. If "nfs" doesn't appear then that's your problem. Do:
sudo modprobe nfs
and continue.
EDIT: Also, I'll assume both your server and your client machine are connected to the network. You have the network DAEMON "!"-disabled in each machine's /etc/rc.conf. So I'm assuming you're connecting them to the network in some other way, and have verified that you can, for example, ssh from one machine to the other.
Third, you're sure that /share exists on your server machine, that a (presumably empty) directory /share/downloads exists inside it, that another folder is mounted on top of that empty directory? When you type "mount" on the server machine there should be a line containing "on /share/downloads".
Fourth, if your client's ip address is 192.168.0.100 (this will be displayed when you do "ifconfig") then the /etc/exports on your server has been changed to read:
/shares 192.168.0.100(rw,fsid=0,no_subtree_check,async,no_root_squash)
/shares/downloads 192.168.0.100(rw,no_subtree_check,async,no_root_squash,nohide)
Then you either typed "exportfs -rf" on the server, or stopped and restarted nfs-server. (I'd stop nfs-server, nfs-common, and rpcbind, then start them up again in reverse order, to be sure.)
STATD_OPTS has no effect in /etc/conf.d/nfs-server. Also, you don't need to use statd if you're using nfs4. So you could change /etc/conf.d/nfs-common to read:
NEED_STATD=no
NEED_IDMAPD=yes
and /etc/conf.d/server and can be blank.
(Then restart everything, as described above.)
If you're using the latest arch packages then portmap has been replaced by rpcbind (which you do have in your DAEMONS line on the server). So you need to change the "portmap:" line in your server's /etc/hosts.allow to "rpcbind:". I also have a "lockd:" line in my /etc/hosts.allow, in addition to what you have. It's probably not the source of your present troubles, and I'm not sure it's necessary. But you could try adding it.
Finally, did you add/change a "Domain = ..." line in the /etc/idmapd.conf on your server, and a corrsponding line in the /etc/idmapd.conf on your client?
Last edited by Profjim (2009-08-25 12:51:48)

[Mini-HOWTO] RPMs needed to compile a kernel-module on / for VM Server

In reply to the question I've asked a couple of days ago in this forum
Compile module for Oracle VM Server
I tried to do it myself, since no answer was given.
And it turned out to be fairly easy afterward too!
Just install these RPM-packages from an Oracle Enterprise Linux v5 i386 distribution (v5, NOT v5U1!) in this order:
kernel-headers-2.6.18-8.el5.i386.rpm
glibc-headers-2.5-12.i386.rpm
glibc-devel-2.5-12.i386.rpm
libgomp-4.1.1-52.el5.i386.rpm
cpp-4.1.1-52.el5.i386.rpm
gcc-4.1.1-52.el5.i386.rpmThese 6 RPMs and finally the
kernel-ovs-devel-2.6.18-8.1.6.0.18.el5 RPM, to be found on the VM Server-CD you've burned from the downloaded ISO.
Hope this helps!
At least I was able to recompile the qla2xxx-modules from the HP-provided sources.
Message was updated by:
hbokho

basically it is the same thing as build a normal kernel module i think. some packages need to be installed first for e.g. the kernel source and development packages.
refer to, (just some google results)
http://www.eece.maine.edu/~sheaff/module.html
http://tldp.org/LDP/lkmpg/2.6/html/index.html
The system I installed the OVS on has a network chip
that is not supported by the kernel in OVS 2.1. I
found the source code for the module, but does anyone
have a clue how to set up an environment so I can
compile the module in a way that it'll be accepted on
the OVS server. I downloaded the Source OVS CD, but
I'm not quite sure what to do from there. Anybody has
some hints?

Kernel module pointer for modctl structures

Hi,
Can anybody tell me where is the kernel module pointer that is pointing at the modctl structure? How can I use the module pointer?
Thanks.

Welcome to Arch Linux
That looks like it is a 2.6 kernel module
http://sourceforge.net/p/omnibook/bugs/58/
Did you try either of these AUR offerings?
ewaller$@$odin ~ 1001 %packer -Ss omnibook
aur/omnibook-git 20110911-9 (7)
Kernel module for HP OmniBook,Pavilion,Toshiba and Compal ACL00 laptops
aur/omnibook-svn-zen 268-1 (1)
Kernel module for HP OmniBook, Pavilion, Toshiba and Compal ACL00 laptops
ewaller$@$odin ~ 1002 %
Last edited by ewaller (2014-08-23 23:33:53)

Real Time Module needed for hi speed digitizer PCI 5911 ?

Rookie question :
I run LV 7.1 , LV Run Time 8 ( whatever this Run Time Engine may be ) , MAX 4.0.0 , NiDaq 8 ( for my two Multi Function PCI Daq's ).
Question : does the PCI 5911 work under NI-Scope 3.3 ( supporting PCI 5911 ) without a Real Time Module ?
i.e. is the Real Time Module a separate ( hardware ? ) device, not necessarily needed for PCI 5911 ?
Sorry for this utter basic question.
I have not used a hi speed digitizer before, only multifunction NiDaq's.
Thanks for any help or reference.

You are probably referring to the LabVIEW Real-Time Module described here.
This is an extension to LabVIEW that allows you to run VIs on a
real-time, deterministic environment, usually on remote hardware. One
common configuration is to use a Windows system as your host, and
communicate to a remote PXI controller running LabVIEW RT.
The PCI-5911 is fully supported for "standard" LabVIEW running on Windows. You don't need LabVIEW RT to use it.
In fact, the PCI-5911 is not supported under LabVIEW RT.
Message Edited by psisterhen on 10-16-2007 09:50 AM

Function module need for 0fiscvarnt

Hi i have 0comp_code,budat and 0fiscper as a source fields,now i want to get 0fiscvarnt...please give me any logic or function module available for that
thanks

Hi,
Usually fiscal year variant is constant if not getting populated from source system.
Check with function team member what Fiscal year variant they using.
Regards,
Akshay

Can't mount NFS share via GUI

Mac OS X 10.8.2
MacBookPro5,3
Hello,
I've recently upgraded to OS X 10.8.2 and am having great difficulty in mounting my NFS shares via the OSX GUI. This worked fine at OS X 10.6.
My aim is to provide an automount type of setup so that less experienced users don't have to worry about the command line.
Can someone please point me in the right direction here?
This is what I've tried to date.
My NFS service is hosted on my Debian server. It supports NFS v4. The service is working and stable and is used routinely with Ubuntu clients. It has also worked with OS X 10.6 clients in the past, but not with OS X 10.7 clients.
To date I have tried the following options:
Mount via finder: Connect to server option using syntax: nfs://<user>@<server>/<share>
setting up autofs using the instructions from pmbuko
using the command line to mount the share.
The first option failed repeatedly. I did find that it would eventually work, though only after I'd manually mounted the share at the command line.
I have not been able to get the second option to work.
I initiate autofs using the command 'automount -vc' and see that the connection is recognised
when I attempt to cd into a directory below the mount point, I eventually get the message 'Connection Refused'.
when I check my Debian logs, I find that the NFS service had actually received an authenticated mount request from the Mac.
when I check my Mac Console logs, I see an error:kernel: nfs_connect: socket error 61 for <server>/<share>
I was able to get the third option working, but only after using the '-o resvport' option.
'Something' does appear to be broken with OS X 10.8.2 as an NFS client.
Any thoughts?

I have found a work around that meets my imediate needs, though it doesn't allow me to use autofs functionality.
The work around uses the traditional Unix/Linux approach of automatically mounting a file system or NFS share via fstab at boot time. OS X 10.8 still supports fstab, even though the file is not included in the default installation.
Once mounted, the NFS share appears as if it is part of the normal file system.
The following is only intended for people confident in Unix or Linux systems administration and in using a shell environment via the command line. Do not attempt this if you do not have these skills.
To set up for fstab, do the following within a terminal session:
create an empty directory in your file system that you can use as your mount point for your NFS share:
sudo mkdir /data/share
sudo chown root:wheel /data/share
using your favourite editor, create the fstab file (in a terminal type 'man fstab' for details)
sudo vi /etc/fstab
add similar to the following to /etc/fstab and then save and exit, substituting your own values where appropriate
# My NFS share
<your-server>:/<your-share> /data/share nfs resvport,rw,hard,intr 0 0
sudo chown root:wheel /etc/fstab
Please note: you may not need the resvport option in the fstab line above. It will depend on your NFS server's requirements.
Once you have done this, reboot your Mac and your NFS share should be mounted at the mount point that you defined.
If not, check your logs to see what went wrong.

Modules needed for ATG lock manager isolation

Hi Currently I am deploying my complete commerce ear on the lock server instance. I would need to isolate only the components required for lock server instance. Can anyone please tell me what all modules would be required for assembling an ear for lock server instance?
Thanks,
Mathew.

For lock manager server you only need DafEar.Admin and DSS modules.
Also, you mentioned about deploying your commerce EAR on the lock server instance so just in case you want to run both on the same instance it is not a recommended way. One of the basic ATG deployment architecture consideration is that any of auxiliary server instances like global scenario server, process editor server, lock manager server etc. should not receive user requests instead page server should be the only instances accepting user requests.

I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets. Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router. I currently have a Verizon FiOS router. I have Verizon for phone, internet and TV. However, TV-wise, I just have a basic service for one TV with just a regular box. No HD, no DVR. Don't need access to a menu, widgets, on-demand. Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here. The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area. But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

Function module needed for customer exit variable need to use in Bex report

Hi Experts,
I have a requirement where i need to get Cummulative result between two interval periods.
If user gives single mandatory input value - 002-2009
for one Scenario:-
Project start Date untill Pervious year i.e December 2008
Where project start date will get from one of the field in my BW CUBE
can anyone help for the customer exit function code for this scenario. As i am into BI i dont have idea in ABAP.
Please help sample cod for this .
Thanks,
Anil.

I had created one customer exit which had fullfill my requirement.

RFC Function module needed for getting table details in APO from R/3

Hi,
I need a RFC function module where I can write a query from R/3 to access APO server database table and get the necessary records.
Regards
Mac

Possible ways
1. Call fm RFC_READ_TABLE and give destination and table name ( But i am not sure how it will work SCIF enviornment of APO)
or
2. Create a custom function module in APO side and call from R/3 side using destnation option
a®

Btsco does not install kernel module snd_bt_sco for current kernel

Hey,
When installing package btsco, the only snd_bt_sco module installed is for kernel version 2.6.19-ARCH.
So as it stands, bluetooth headset functionality on current is broken. All other bluetooth related features seem to function ok.
Sarton

I've been doing some research to get my bluetooth headset to work. Theres been changes lately to the packages which affect the wiki article on getting bluetooth headsets to work. btsco is deprecated afaik. supposedly the plugz project is where its at now. I am having trouble finding any solid information on this subject. I am going to make a PKGBUILD for plugz from cvs, and see what happens from there.
http://bluetooth-alsa.sourceforge.net/index.html

CIFS Kernel Module Needed for A7600-F. Can't mount CIFS Shares.

Similar Messages

Maybe you are looking for