CIM Providers for C210 and ESXi

Hi,
are CIM Providers for ESXi for the C210 Series availible?
Michael

You might want to try the developer forum as well for this question.
http://developer.cisco.com/web/unifiedcomputing/forums/-/message_boards?_19_mbCategoryId=2049093

Similar Messages

Authentication providers for TACACS+ and RADIUS

Does anyone supply WLS 8.1 authentication providers for TACACS+ and/or
RADIUS?
Ben

So in the ACS network config you add 2 NASes (or should that be NASi?)
One is of type TACACS+, enter the device ip and secret. The other is RADIUS - unless you need to use some vendor specific trickery you could stick with IETF RADIUS to keep it simple. Again enter the IP and the secret.
Assuming you a have at least 1 user in say, the default group (acs group 0) you then need to do some basic setup. In ACS a single group can have both RADIUS and TACACS+ config :-)
RADIUS will pretty much default to PPP anyway, but you should still set the Service-Type to Framed and set session timeouts etc.
With T+ you tick the boxes for the services that are allowed. For SSH login you might have to define a custom service first (under interface config)
Suggest you first take time to scan through the ACS docs.

OWSM 11g : Authentication Providers for X.509 and SAML policies

Hi All,
I am currently trying to implement the X.509 and SAML policies. As per the documentation for these polices I need to configure an authentication provider(or Identity Assertion provider) that can handle perimeter authentication via the NameCallback. I had configured an authentication provider(default authentication provider) that handled the namecallback and passwordcallback. What I can't figure out is how do these two authentication providers differs. And, incase one has to configure for the X.509 and SAML policies how to do the same.
Any pointers will be useful. Especially, from anyone who has worked and implemented the above policies.
Thanks in advance.
Edited by: Shomit Sahdev on ८ अप्रैल, २०१० १२:२५ पूर्वाह्न

After research by Oracle Support it actually turns out that this problem was a combination of factors:
1) some clients were effectively using an invalid certificate so it is corrrect they got an error and everything worked fine when they started using the right certificate
2) it does, however, turn out that, in the case of an error the error handling has been obfuscated in WLS 10.3.6 as compared to WLS 10.3.4 which gives a more descriptive error stating the nature of the problem (missing certificate, invalid certificate, unknown user, ...). Apparently this was deemed a security issue and has thus been replaced by a generic "internal server error". It is however possible to re-activate this older behaviour using a couple of JAVA_OPTS that you pass during server startup:
-Dweblogic.wsee.security.debug=true -Dweblogic.wsee.security.verbose=true
The above reintroduced the behaviour we had in WLS 10.3.4 and thus solves our problem!

8.0.2 - problem 1 - unable to scroll screen when the keyboard is present. Huge problem for emails and other cloud based providers that allow for data entry. We need a fix ASAP!

8.0.2 - problem 1 - unable to scroll screen down or up when the keyboard is present. When typing text, I am unable to see the text I am writing due to this problem. Huge problem for emails and other cloud based providers that allow for data text entry. While the keyboard is present, I am unable to scroll down to see the text, the screen automatically scrolls back up to the top of the screen. We need a fix ASAP!

Have you tried resetting your iPad? You will not lose any data. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

I've been paying an average of 140-150 monthly for 2 lines with 3 gb data. I'm debating if I should start to explore a change of providers because other providers have better offerings. I can't trust the agents, asking the community for guidance and the

Looking for guidance.. the title says it all!! Been over paying for the past 5+ years with Verizon.

Based on your current bill, you are paying $50 for data plan, $25 per line and $20 + for a phone installment. Or youre in a high tax state and have 2 year contracts.
If your contracts or Edge payments are almost complete. It's a good time to evaluate. carriers don't prorate, so port numbers 2-3 days before your bill end date.
Best reception.
1.    Verizon
2.    AT&T
3.   T-Mobile, limited to major urban and suburban areas
4.   Sprint, very limited coverage, major urban areas.
prices
Verizon and AT&T are tied for prices and plans
T-Mobile offers some plans slightly lower in price. Their latest offer is a truly unlimited data plan, at a price. It's not cheap, but it's real.
Sprint is slightly cheaper. Not really half of other carriers. You get what you pay for.
phones.
unless you bought an iPhone 6 or Nexus 6 your phone will not work on another major carrier. there are prepaid carriers that use Verizon network.   So you will have to buy a new phone.
most carriers offer a perk for porting your numbers. If the carrier offers to pay ETFs, you have to payoff your account and provide the proof, and turn in your current phone to get credit.
Anything else?

We are getting calls from "peoples connect u.s.a." telling us they are providers of service for Microsoft and Macintosh. They have been informed our computer has informed them our drivers are in going to crash. legit. We think they are bogus. Right?

Does anyone else get calls from "Peoples' Connect U.S.A." indicating they have received error signals from our computer that that all drivers are going to crash and that our system is at high risk?

I get about one a day, usually saying our Windoze computer is infected (we don't have a Win computer). I cheerily thank then for calling and say I need to transfer them to our IT manager (I'm a home user so no such thing), lay down the phone near a radio with elevator music, and go about my business.
One person reported here within the last month that they fell for the trick. The callers ended up with $600 of her money for something that did not need fixing. They also ended up with her credit card number, her phone number, and her e-mail address. They had a good day; she didn't.
As most of these calls come from overseas (I call them "Mike from Mumbai" calls), the FCC can't do much but wring their hands. They've not been able to stop the "Rachel from Cardholder Services" robo-calls that have been plaguing US households for nearly a decade.

Broadband for Mac and PC?

I am looking for a suitable UK broadband service compatible with both my current OS 9.1 iBook (and a possible OSX conversion this year) and my partner's PC (XP Home). I don't particularly want to switch phone providers. I note BT does not yet support OS X. Any recommendations?
neil th
iBook G3 Mac OS 9.1.x

neil,
BT are excellent, if a little pricey. Just to give you the ultimate choice, try looking at the definitive list here:
http://www.adslguide.org.uk/
It's been around for years, I've used it for choosing ADSL providers for a number of addresses, but in the end I've always come back to BT.
The site will allow you to check prices, availability, and most importantly, what most users think of their service. Above everything else, check this. You'll find an enormous difference in the quality of support, especially for Macs, between, say, BT, Virgin and Tiscali.
Don't worry about OS9 and OSX compatability. Something else you should insist on, is that you get an Ethernet DSL modem. Most will try to fob you off with a USB modem, and although they will work on a Mac and a PC, it'll only work on one computer at a time.
find out what they offer, and then do your research, or ask here. Or fork out the £60 (or £90 for wireless) for a top quality DSL modem/router from Maplin / PC World. Again, ask here if you want guidance.
Or look on ebay for a non-wireless DSL modem / router being sold by someone who has just upgraded to wireless. Again, ask here if you want guidance. I could recommend Netgear and Linksys. Belkin also make DSL modem/routers, but some of the older models are just naff.
Let us know how you get on.

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

Difference between Data Providers for Oracle

Hello,
There are 3 .NET Data Providers for access an Oracle Database:
1) ODP.NET, who uses Oracle API to access an Oracle Database.
2) Microsoft .NET Data Provider for Oracle, who comes in the Assemblie System.Data.OracleClient
3) Microsoft .NET Data Provider for OLE DB.
My questions are:
1) There is another Data Provider to access an Oracle DB ?
2) Which is better, for example to handle LOB fields ?
3) Which is better in performance ?
4) ODP.NET uses some Oracle API to handle a DB, and the others ?
5) What is the requirement (Oracle Client, OS) of each of them ?
Best Regards
Alfredo DS

I would recommend using ODP.NET. Overall, I've seen better performance from it than other Oracle providers. It requires the 9.2 client and any OS that the 9.2 client supports.
With respect to LOBs, the first ODP.NET version was consistently faster retrieving LOBs than other Oracle providers. The latest version of ODP.NET (and the upcoming version) have made some substantial improvements in LOB performance on top of that.

Where are the settings to invoke SSL for POP3 and SMTP?

I keep getting annoying emails from Yahoo!AT&T who are my internet providers about setting SSL settings for POP3 and SMTP services for receiving emails. I have it configured on my main email settings for my client. Do I have to set it as well for Blackberry service thru Verizon?
If so, where are these detailed settings located?
Thanks,

Located on your providers BIS site.
BlackBerry Help
www.blackberryboards.com

Pricing for 4 and 4s

I'm getting very frustrated as the pricing for the 4 and 4s is yet to be changed to the announced lower prices. Other providers had the new prices in their systems early yesterday... I handle a large corporate account and have many users wanting to take advantage of the price drops. I'm a "usual" huge VZW fan, however, I can't imagine why in the world this hasn't been addressed yet, see no good reason or any explanation for it and find myself extremely disappointed w/VZW right now - EXTREMELY DISAPPOINTED...
VZW - you are making my job more difficult - not happy

I was told yesterday by a VZW customer service person (through the "Chat Now" feature on www.vzw.com), that the price was supposed to change yesterday "but it didn't."
"James" wouldn't give me any more information than that.
The 4S is already $99 at Best Buy, but my plan is $50 more at BB than with VZW, so I'm obviously waiting for the price to drop with VZW. Silly that they'd wait until the 5 comes out.....especially when they're telling people it was supposed to happen yesterday and when other retailers are already offering it at $99.

Multiple authentication providers for the same identity store?

We are on WebLogic Server 11g PS5 and in the middle of configuring the authentication providers.
Turns out we an Active Directory instance where we have two distinct User Base DNs we would like to use, without overlap, but they share the Group Base DN.
What is the best practice to configure this? I think we could use the parent DN, but that would basically include the whole of the directory for users and groups, will that impact performance?

Hi Alexandre,
You might find this helpful - http://download.oracle.com/docs/cd/E10761_01/doc/oam.1014/b32420/v2authen.htm#BABJCHEJ. The text "suppose the user requests a resource that is protected by a form-based authentication scheme that redirects the user to a form with several options for logging in. When the user selects a login method on the form, he or she is again redirected, this time to a form containing a certificate-based authentication scheme." suggests that what you want to achieve is possible. If you do get this configured and working the way you want, can you please share with the forum?
-Vinod

Downloaded update for Firefox and now I can't get rid of AOL.

Downloaded update for Firefox and now I can't get rid of AOL. I have tried to delete anything associated with AOL and when restart Firefox.....there's AOL again. I even reinstalled Firefox.......there it was again.

Where does AOL show up -- home page?
I think the first thing to check is whether you have any AOL-related add-ons. These might override your regular settings. You can review and disable ALL nonessential or unrecognized extensions here:
orange Firefox button (or Tools menu) > Add-ons > Extensions category
Note that in most cases, you need to use the Restart Firefox link to actually deactivate the extension you chose to disable.
Next, to fix your home page, try the steps in this article: [[How to set the home page]].
If there is a problem with your search providers being switched from Google to AOL, try this extension:
https://addons.mozilla.org/en-US/firefox/addon/searchreset/
Any improvement?

VoIP providers for WRTP54G

Other than Vonage, will any other VoIP providers work with the WRTP54G router?
Message Edited by steve1970 on 05-23-200702:49 PM

Sorry if the original question was not clear.
As it stand now, if your WRTP54G is designated to be used with the Vonage service, you cannot use it with any other VOIP service. Same goes with Earthlink. If you buy the WRTP54G router specifically designated to be used with Earthlink's TrueVoice, you cannot use it with any other VOIP service. As far as I know, they make three routers - one for Vonage, one for Earthlink, and one labeled "WRTP54G-NA" for basically all the other VOIP services.
However.... If you are computer savvy, you can attempt to "re-flash" the firmware with the NA firmware. There are some sites who have documented the process. This will most likely void your warranty, so use at your own risk.
Hope this answers your question.
Message Edited by mpemberton on 06-25-2007 10:48 PM

Nexus5548P and ESxi communication issue

Hi Guys,
I have a Cisco C210M2 server connected to the nexus switch directly. 2 ports are configured for port channeling and vpc.
On the Server I installed ESXi and created a vSwitch and a host with an IP of 192.168.90.210
I have a storage connected to the pair of Nx switch and configured for PC and vPC. On the storage I have configured the IP on the same range
192.168.90.200
I was not able to ping between the IP address. I have checked that the portchannel is up and runing and vPC status shows as up.
Baically not a networkin guy, I googled a lot and came across lldp.
If I did a sh lldp entry , I can see the storge ports there not the server ports.
On the sh lldp dcbx interface eth1/xx I cannot see any peer information , where as on the other ports I can see the peer information.
The server ports are 1G ports and I configured the speed to 1000 on the nexus , where as the storage ports and 10G.
Any help wil be appreciated, I can provide more details if required.
George

George,
Can you verify the VLAN configuration on switch interfaces and ESXi host ?
SSH into ESXi host and provide the output of " esxcfg-vswitch -l "
From N5K switch,
sh run int port-channel ID
Padma

CIM Providers for C210 and ESXi

Similar Messages

Maybe you are looking for