CIM XML Examples for Importing Service Item Data

Use these simple XMLs to edit and create your CIM file to import SI Data...
The Lifecycle Center guide provides all the instructions on how to create the CIM XML for importing Service Item data - the attached examples can be used as a starting point for you to use.
The "Host Policies" example provides the format for a single service item
The "System Policies Approvals" example provides the format for multiple service items
Note the image below taken from the LCC guide to capture the correct data type that must be used in defining each SI attribute in the XML.

maybe I'm being a bit slow on the uptake, but I've tried and tried and none of my XML files will import, they always stop at 'Class Not Recognised'.
I had originally assumed the class was the SI type - does anyone have any information about this?
Thanks, meghan

Similar Messages

Service Item data in Datamart?

Hi,
Just wondering if there is a way to send Service Item data into datamart using ETL? We want to be able to reporting on the SI data in a custom report.
Thank you.

Hello, I am interested in learning more on this new feature. We have requirements for ServiceItems we are planning on implementing services using SI, but most likely won't occur until we upgrade to 10R2. I have been reading 9.4 documentation for ServiceItems and find it difficult to follow. Are there other sources or resources to assist with learning how to use a serviceitem? Outside training is not an option. Thanks again. Bev

XML example for testing query with soapui

Hello,
I am trying to build a query using XML with the downloaded Contact Custom.wsdl.
I did get a msg complaining about that there were no session. I've looked into the Web Services.pdf doc and see the description about session, etc.
I'd appreciate if I could get a XML example for doing the authentication / session ... If you have a query example would be nice too...
Txs. a lot.

Hello,
Here is a sample QueryPage request for the Contact object containing the UserName and password tokens:
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:wsse="http://schemas.xmlsoap.org/ws/2002/07/secext"><soap:Header>
<wsse:Security>
<wsse:UsernameToken>
<wsse:UserName>[username]</wsse:UserName>
<wsse:Password>[password]</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soap:Body>
<ContactWS_ContactQueryPage_Input xmlns="urn:crmondemand/ws/contact/10/2004">
<UseChildAnd>true</UseChildAnd>
<PageSize>100</PageSize>
<ListOfContact>
<Contact>
<ContactId></ContactId>
<ContactFirstName></ContactFirstName>
<ContactLastName></ContactLastName>
</Contact></ListOfContact>
<StartRowNum>0</StartRowNum></ContactWS_ContactQueryPage_Input></soap:Body></soap:Envelope>
Thanks,
Sean

XML example for GANTT (2004s)

Hi,
Does anyone have an XML example for the GANTT component (2004s)? (I mean a data file for plotting a gantt chart.)
The examples in the documentation apply to other chart types.
Thanks,
Roelof

Hi all,
there is the new link for the schemas:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/lw/uuid/f010ec31-9658-2910-3c83-c6e62904eceb
and a little tutorial in Wiki: https://wiki.sdn.sap.com/wiki/x/iTE, where I will provide a little xml sample soon (-;
kind Regards
Stefanie

Examples for all service patterns and communication patterns.

Hi Friends,
Can anyone of you give me some real life examples for follwoing service/communication patterns?
1)Synchronous
2)Asynchronous
3)Request Confirmation
4)ReadQuery
5)Notification
6)Information
And also if any guidelined on when to use which patter etc...
Thanks in advance,
Best Regards,
Ujwal

Hi,
Suggestion is to refer SAP help for details:
1)Synchronous: when you need realtime response, i.e. you accept order and want to give order number to customer then you will call Sync service.
2)Asynchronous: when you dont need realtime response, i.e. you want to replicate all orders from one system to another system.
3)Request Confirmation: you made a request and system confirm your request. i.e. Order data is supplied and order number is confirmation. Database will be updated.
4)ReadQuery: I guess you are refering to Query/Response pattern, You just want some information. No database will be updated.
5)Notification: It is another form of "QueryResponse" but user action required.
6)Information: It is another form of "QueryRespone" but NO user action required.
Answer following questions to determine which pattern you need.
Q1. Do you need response?
Ans: Yes: Sync pattern
        Q1.1: Does any update required?
        Ans: Yes: RequestConfirmation pattern.
        Ans: No: QueryResponse pattern.
Ans: No
        Q1.2 Does user required to take notice of response?
        Ans: Yes:Notification pattern
        Ans: No: Information pattern.
Regards,
Gourav
Edited by: Gourav Khare on Jul 27, 2009 2:18 PM

Different tax codes in the MIRO for single service item

Dear all,
Customer wants to enter 2 different tax codes in the MIRO for single service item. How it can be achieved?

>
Milosavljevic Sreten wrote:
> Just loudly thinking... what can be reason that one service for same invoice is taxable with two different tax codes?
>
It is cross-counties transportation. Part of route outside company country is non-taxable, inside part is taxable. Amounts are proportional to distance and hence become known only at time of invoice receipt.
Users do not want to create 2 separate invoices. They would like to have ability to enter 2 lines in MIRO. But I need your help to understand, how it can be done? Service receipt is done by single line (because actual taxable / non-taxable amount is unknown at that time). So, is it possible to enter non-taxable amount in MIRO in some additional line?

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments

Enter the price for the service item

Dear Experts,
We are implementing SRM 7.0 and we have upgraded our system with Service pack 7.Created a limit SC and approved at all levels. After approving SC system created PO in SRM but did not replicate to backend ECC system. When I looked PO in edit PO mode and system throws an error message "Enter the price for the service item".
Have any body faced this issue? If yes please guide me how to fix this issue or Suggest me any useful link or OSS messages.
Thanks in advance.
Thanks
Umakanth

Hello,
I assume you are using a Product category configured for Extended Classic scenario.
In this case a limit item in SC creates limit item in PO(in SRM). But when this PO is replicated to R/3, it always creates item with type 'D' for limit item in PO.
Now with respect to error message you get, can you check if you have specified all LImits (Overall value, Expected value etc)?
You can also try creating a PO directly in SRM with limit item (use same Product category as above) and see if it replicates.
If you get the same error, please raise a OSS message for SAP.
Thanks,
Sushil

NB type PO for inter company sales for a service item

Hi,
I need to create the above PO for a service item (which will not pass through the delivery process). But I do need the A/R and A/P in both the books as this is an inter company scenario. How can such a PO get invoiced directly w/o the delivery? The material is a service material (DIEN). What are the necessary configurations that need to be in place to complete this process?
Thanks!

Hi
1. Define Business Area.
Got to IMG-> Enterprise structure->Definition-> Financial accounting->Maintain Business Area.
2. Assign Business Area
IMG -> Enterprise Structure -> Assignment -> Sales & Distribution -> Business Area Account Assignment > Assign Business Area to Plant and Division or Assign Business Area by Sales Area.
[Business Area|http://www.sap-basis-abap.com/sapfi003.htm]
[Business Area|http://www.sapstudymaterials.com/2007/12/mm-configuration-assign-business-area.html]
Regards

Very urgent: Can't create LSMW for PO service item

Hi all,
I created LSMW for PO service(Item cat ="D") by using BAPI
( Business object: BUS2012, Method:CREATEFROMDATA1, Message Type:PORDCR1 and Basic Type: PORDCR102)
This below is my source filed.
POHDR
PO_NUMBER
    POITEM
      PO_NUMBER
      PO_ITEM
          SERVICE-ITEM
             PO_NUMBER
             PO_ITEM
            Activity Item
            Activity Number
              ACC_ASSIGN
              PO_NUMBER
              PO_ITEM
              Activity Item
              Activity Number
              Sequence Number
After i started idoc i got the message Message no. SE518 (No account assignment exists for service line 0000000010)
How can i slove this problem?
Thank you,
Duanchai

so you consider this closed?
Very urgent: LSMW

Clarification on services-config.xml files for RemoteObject services

I am currently preparing an AMFPHP environment for exchanging
data with Flex and AIR applications. I can connect to the services
via Netconnection, but using RemoteObject won't work.
Documentation for the necessary configuration files
(services-config.xml, remoting-config.xml and the like) is, um,
sparse and seems to be slightly incorrect or misleading at times.
So I'm looking for clarification about
changes in the syntax of services-config.xml · in
examples for Flex 2.01, there are "class" attributes with values
beginning with "flex.", in Flex 3 examples the attribute name has
changed to "type", values beginning with "flex." have mostly
vanished and been replaced with similar looking values beginning
with "mx.". Are "flex." and "mx." prefixes interchangable?
correct syntax for linking other files into
services-config.xml · the livedocs state that Adobe
prefers linking files into services-config.xml (using something
like <service-include file-path="remoting-config.xml"/>)
instead of defining all service parameters there. But in the
example from the Flex 2.01 livedocs, the root element of the
service-config.xml file is <services> instead of
<services-config>. Assuming that <services> is meant as
a
child of the <services-config> root element, there
seems to be a mandatory <service> child element missing.
That's either intended, illogical, and misleading, or simply
erroneous.
which classes are still valid in Flex 3, which have changed?
· Most of the examples for using RemoteObjects out there are
for FlexBuilder 2 (e.g.
here)
and don't seem to work with FlexBuilder 3 Beta 2. But there is no
statement to be found in the Flex 3 documentation about what has
changed.
a meaningful example for services-config.xml · In the
Flex 3 Beta 2 documentation here are plenty of references to using
services-config.xml, as I can find even information about the
ServerConfig class in the ActionScript 3 Language Reference, a sort
of wrapper class for the information provided in
service-config.xml, but there is no information about what
constitutes a
working service-config.xml configuration (which XML tags of
what names containing what attributes need to be present).
As I'd really like to create cutting-edge Flex and AIR OCC
applications, I'm eager to have those ambiguities clarified.
Best regards,
Cathness

From the docs it looks like this is used for web services as
well:
http://livedocs.adobe.com/flex/201/html/dataservices_config_100_3.html#260186
If this isn't the right config file, which file should I be
looking at?
Mike

Possible elements in the instanceconfig.xml file for presentation services

g'day
Has anyone here come across a list of all the possible elements that can be put in the configuration file for a presentation service, instanceconfig.xml ?
I have found next to nothing in the documentations, about what can be configured there.
What I am specifically after is: How can I change the default listening port for the Presentation Service? The default port is 9710 and I want to move to another port.
Also, how can I move the JavaHost from the default port 9810? I can change the file OracleBI/web/javahost/config/config.xml to reflect the change. Once the JavaHost has been restarted it starts up on the expected port, but the Presentation Service still tries to communicate over RPC to port 9810. How do I configure the presentation service to search for the JavaHost on a non-default port?
I have boiled it down to my original question: What are the possible values I can configure in the instanceconfig.xml file?
Any comments here would be great.
Cheers, 
Borkur

So, I had a little breakthrough here.
I found in the OBIEE deployment guide, page 142:
To change the Presentation Services listener port
1 Open the instanceconfig.xml file for editing.
2 Locate the <WebConfig> element.
3 Within the <WebConfig> tags, create the element <RPC> and assign it the RPC Listener Port
value for the BI Presentation Services instance, as shown in the following example.
<WebConfig>
<ServerInstance>
<RPC>
<Listener port="9715" />
</RPC>
</ServerInstance>
</WebConfig>
NOTE: In the preceding example, the RPC Listener port for the BI Presentation Services instance
has been changed to port 9715 from the default of 9710.
4 Save changes to the file.
This almost works. The RPC element has been deprecated, as was reported in the sawserver.out.log:
The configuration entry 'RPC/Listener' is deprecated. Please refer to the admin guide for more information.
What I then did was to just remove the RPC elements and leaving the Listener element straight under there ServerInstance element. This seems to have solved the problem.
I still have to figure out how to let the Presentation Service know that I have moved the JavaHost to antoher port ...
Cheers,
Borkur

Help required for importing a repository data file in the B2B console

I am trying to import a repository data file with the delivery-channel element
and attributes as below.
<delivery-channel
name="GM_DC"
syncReplyMode="none"
nonrepudiation-of-origin="false"
nonrepudiation-of-receipt="false"
secure-transport="true"
confidentiality="false"
routing-proxy="false"
document-exchange-name="GM_DE"
transport-name="GM"/>
I have modified the WLC.dtd present in the lib\dtd subdirectory of the WebLogic
Integration installation directory to add the syncReplyMode attribute.
When i import the xml file,i get the following error
com.bea.b2b.B2BException: ERROR: Invalid document, file 'C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\B2B_COV_Export.xml'.
 at com.bea.b2b.bulkloader.BulkLoader.processDataFile(Unknown Source)
 at com.bea.b2b.bulkloader.BulkLoader.processDataFile(Unknown Source)
 at com.bea.b2b.bulkloader.BulkLoader.load(Unknown Source)
Please advise,
Aruna

Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments

Example for Functional Area Master Data in Private Company

Hi Expert
From my ERP experience with the State Enterprises, there are obvious dimensions to segregate the Functional Area Master Data of each Fund.
Such as the School Business, sometime they use Functional Area to divide the fund to use with Education Activity, Research Activity and Other Social Services Activity. This dimension oftenly have the direction from the government to be divided.
Could you please advice for example of Functional Area Master Data to be applied with the Private Company? I need to provide more example for my client to apply the Functional Area to use with, due to they are the independent firm that would like to use Functional Area.
Rgds,
Ton

Hi,
In private sector you might have similar segregation. For example, I was involved in the project where functional area was used to distinguish R&D expenses from operational expenses on the same fund. I.e. if you can always look at this as additional dimension in your budget management framework, if other dimensions are not sufficient for the efficient reporting. However, you should also bear in mind, that functtional area has other functions (sorry for tautology) which lie more in financial and not budgetary domain.
Regards,
Eli

How to do INIT for Sales order Itema Data (DS 2LIS_11_VAITM)

Hi all
I have a report on sales order item data, I have to reload it. DS 2LIS_11_VAITM
Can any of you pls explain me the steps to do the INIT? Refill set up tables etc
Many Thanks in advance
Ishi

Hi Hari
Many Thanks for the explanation and steps. I deleted set up tables and executed to fill it.
It says in R/3 Start of Processing, I ticked to continue and its still running.
In the mean time I checked RSA3 and it says 1007 records selected. I am refreshing it and the no. of records are still the same.
Can you tell me how long it takes to fill the table?
And the R/3 system is still running (Start of Processing)
Thanks again
Ishi

CIM XML Examples for Importing Service Item Data

Similar Messages

Maybe you are looking for