CIMC Web/SSH interface not responding

Can the CIMC Web/SSH interface be reset without power cycling the whole server?
We have two C460 M2 Rack mount servers using a dedicated CIMC. Standalone (not UCS manger enabled). The server is running fine and I can ping the managment IP fine. The Web interface times out and SSH connects but presents no CLI #.
The documentation for this server indicates that the front panel has a 'Reset Button' and an 'NMI Button' The documentation however lacks any description of what it resets or even what NMI is.
Thanks in advance for you replies.

Hi,
Unfortunately, the ways you can reset CIMC without touching the rest of the server involve a connection to CIMC itself through either SSH or HTTP(s). There is an OLD known issue with the old models (M3s do nt suffer this, at least I have not seen it) where you need to reboot the server to recover access.
-Kenny

Similar Messages

Public Interface not responding after second node is started in the cluster

Hi
Has anyone ever experienced the public interface not responding between nodes in the cluster (ping, ssh, scp) after the second nodeapps is started in the cluster?
This is a new install so all I have installed so far is the base release of CRS 10.2.0. This is on Solaris10. The vipca failed during the installation, however I was able to proceed and manually add the nodeapps using srvctl add nodeaps -n -o -A.
It seems after the second node is started I loose all connectivity to the public interfaces and to my default gateway.
Also I'm getting the following messages sometimes after I try and stop the nodeapps and start them back up.
CRS-1006: No more members to consider
CRS-0215: Could not start resource 'ora.node1.vip'.
Any suggestions on where I should start troubleshooting?
Thanks

Do you have default GW?
It can connects with GW, can't it?
Check metalink
CRS-0215: Could not start resource 'ora..vip' [ID 356535.1]
CRS-1006: No more members to consider when starting service [ID 465364.1]
Good Luck

Safari has become unusable-it freezes, links are unclickable, then I get Web pages are not responding...

Safari has become unusable—it freezes, links are unclickable, then I get "Web pages are not responding..."
Safari has been my favorite browser for a long time. Nothing against the others but I have found it faster and better. Now I can really no longer use it. This has been going on and getting worse for atr least few weeks. Anyone know why?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
If any extensions are installed, disable them and test.

Error "web pages are not responding"

What is the cause of this Safari error? What needs to be done to prevent it?
"Web pages are not responding. To reload this webpage, all pages in other tabs and windows must also be force reloaded. Do you want to reload this page?
Force reloading might cause you to loose information you have entered"
Several threads reference it when it occurs after performing various kinds of actions, and the author's ascribe it to their particular operation, but obviously it is a more general error.

> look under "User Diagnostic Reports"
No entrys exist in that area. Looks like the system cleaned itself up earlier today:
11/11/11 1:06:49 PM SubmitDiagInfo[3887] Cleaning up expired diagnostic messages database at path: /var/log/DiagnosticMessages/2011.10.12.asl
Using OSX 10.6.8 and Safari 5.1.1
After posting my message I performed the latest Software Update.
But my question is also general -- what are the causes of this error? I have read assertions that it relates to the newest Flash Plugin, or Java, etc. but I would like an authoritative explanation. How can something cause ALL tabs to need to be reloaded? Is it caused by something on a web page, or by something internal like the cache getting too large or corrupted or what?
This error is associated with extremely high % of CPU time being taken up by Safari Web Content.

Safari is repeatedly crashing and web pages are not responding

So, my safari is constantly freezing (the spinning wheel of death shows up) and then I'm told that the web-pages are not responding and I need to force reload them all. And this can repeat a number of times; a full system re-start is the only fix.
Any fixes, solutions would be appreciated.
I'm using Safari 5.1.9; and Mac OS X 10.6.8

MIght be third party plugins causing Safari to freeze.
Try the troubleshooting help here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
And see if you can do this before Safari freezes.
Launch Safari and immediately press Command , (comma) to open the Safari Preferences pane then select the Extentions tab.
If there are any extensions installed, turn that OFF, quit and relaunch Safari to test. If Safari doesn't freeze, uninstall one extension at a time, quit and relaunch Safari to test again.

Web pages are not responding

I often get the message that "web pages are not responding". Safari seems to slow down to a crawl, I've reset Safari and emptied the caches, t may get better for a few minutes but then returns it's slow down. Someone said to quit safari and then trash Home/Library/Caches/com.apple.Safari/ folder. That doesn't seem to help. Does anyone have any suggestions how to solve this annoying problem?

Read this whole message before doing anything.
Back up all data.
Quit Safari if it’s running. Then select
 ▹ Force Quit…
from the menu bar. A small window will open with a list of running applications. Safari may appear in that list, even though you quit it. If so, select it and press return. Close the window.
Step 1
In the Finder, press the key combination shift-command-A to open the Applications folder. Select the Safari icon in that folder and press the key combination command-I to open the Info window. There’s a checkbox in the Info window labeled Open in 32-bit mode. Uncheck it, if checked. Close the Info window and the Applications folder.
If Adobe Flash Player is installed, select
 ▹ System Preferences ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane.
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
Caches/com.apple.Safari
Caches/com.apple.WebKit.PluginProcess
Caches/Metadata/Safari
Preferences/com.apple.WebKit.PluginHost.plist
Preferences/com.apple.WebKit.PluginProcess.plist
Saved Application State/com.apple.Safari.savedState
Leave the Library folder open. Try Safari again. If it works now, stop here. Close the Library folder. If you still have problems, continue.
Step 2
Triple-click anywhere in the line below to select it:
rm -fr $TMPDIR../C/com.apple.Safari
Copy the selected text to the Clipboard (command-C).
Quit Safari again. Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal. Launch Safari and test.
Step 3
If Safari still doesn’t work right, quit, go back to the Finder and move the following items from the open Library folder to the Desktop (some may not exist):
Cookies/Cookies.binarycookies
Internet Plug-Ins
Preferences/com.apple.Safari.LSSharedFileList.plist
Preferences/com.apple.Safari.plist
Preferences/com.apple.Safari.RSS.plist
Preferences/com.apple.WebFoundation.plist
PubSub/Database
Safari
(Note: you are not moving the Safari application. You’re moving a folder named “Safari.”)
Try again. This time Safari should perform normally, but your settings and bookmarks will be lost. The default set of bookmarks will be restored. Delete them all.
If the issue is still not resolved, quit Safari again and put all the items you moved to the Desktop back where they were, overwriting the newer ones that may have been created in their place. You don’t need to replace the files you deleted in step 1. Stop here and post again.
If Safari is now working normally (apart from the lost settings), look inside the “Safari” folder on the Desktop for a file named “Bookmarks.plist”. Select
File ▹ Import Bookmarks
from the Safari menu bar. Import from that file. Recreate the rest of your Safari settings. You can then delete the items you moved to the Desktop.
Note: This step will remove your Safari Extensions, if any, and their settings. If you choose to restore them, do so one at a time, testing after each step to make sure you haven’t restored the problem.
If you don’t like the results of step 3, you can undo it completely by quitting Safari and restoring the items you moved or deleted in that step from your backup, overwriting any that were created in their place.

Photosmart 7510 Touchsmart web app is not responding

I have had this printer for awhile (1-2 years maybe?) and have never encountered any errors. I went to print quick forms from the device's display and got the following error
"Touchsmart web app is not responding. Please try again later."
I am on the correct network, I can print and scan wirelessly from my computer with no problems. I have reset the wireless connection, our modem and router. I checked for updates and there are no new updates.
I saw that many have had this problem in the past, but have not seen anyone who has gotten it fixed.
Is there a solution or is this now just a basic printer again?

Hi pepoc,
Welcome to the HP Support Forums. I see that you are getting a connection error when trying to access the HP Quick Forms printable found on the front panel of your Photosmart 7510 printer.
Please set a manual IP address and manual DNS servers for the printer. I have included a link to another post with the steps, including screen shots, on how to do this.
If you run into any issues, please let me know at what step things went hairy and what any error messages said.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Actiontec MI424-WR web interface not responding properly

The web interface of my Actiontec MI424-WR rev c router, with firmware v 4.0.16.1.56.0.10.12.3, is not responding properly when I try to access it to configure the router or read the logs. It sometimes takes a very long time to respond, and my browser will say that "the connection to the server was reset". Has anyone else had this problem?
ps
I neglected to mention, it just started doing this recently, probably within the last two weeks or so, it was fine before.

annonymous009 wrote:
The web interface of my Actiontec MI424-WR rev c router, with firmware v 4.0.16.1.56.0.10.12.3, is not responding properly when I try to access it to configure the router or read the logs. It sometimes takes a very long time to respond, and my browser will say that "the connection to the server was reset". Has anyone else had this problem?
ps
I neglected to mention, it just started doing this recently, probably within the last two weeks or so, it was fine before.
Connecting to it it wirelessly or via cat5?
If wirelessly does the same occur if you connect hard wired.?
Any other routers on your LAN?
Any new wireless devices, phones etc, added recently?

The very top of web pages do not respond search engines and such. like face book cant use top messege or freind button it is same for all web sites.

if i were to use Google and look up something say i wanted a pic or video it wont work. or i search and want to search for something else i have to reset the web page. on any web page the top of the page does not respond for any function.
While i am here have another problem. I have had a h&r block website that auto loads from time to time. on its own now it is supposed to block pop up sites and this one gets threw. I do not want this its an aggravating.

Hi,
Please see [https://support.mozilla.org/en-US/questions/911441 this.]
You can also check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]

Ix2 web interface not responding

I have the EMC IX2 200. I can no longer connect to the web interface. I recently had to replace a failed drive, I used the same model and size. Afterwards the mirror repaired itself but I could never manage the storage. Some message about the drives. The drive status showed fine in the mgmt interface. I downloaded firmware updates but it would not allow me to install. I tried rebooting the device but it never completed, even after waiting for than a day. It wouldn't respond to pings so I unplugged it the powered it back up. Now the web interface never comes back up. I can access my existing shares but I can't manage the device via the web interface. No service is listening on ports 80 or 443. I did have ssh enabled so I can access the system via a shell. Apparenty this is a common problem for which no known solution exists judging from numerous other forums. After rebooting all lights appear normal other than the white exclamation light keeps blinking. I've already spent many days on this issue but haven't given up on this product yet. Any suggestions?
[Port scan]
Scanning 192.168.1.15 [1000 ports]
Discovered open port 22/tcp on 192.168.1.15
Discovered open port 21/tcp on 192.168.1.15
Discovered open port 139/tcp on 192.168.1.15
Discovered open port 445/tcp on 192.168.1.15
Discovered open port 9000/tcp on 192.168.1.15
Discovered open port 873/tcp on 192.168.1.15
Discovered open port 49152/tcp on 192.168.1.15
Discovered open port 631/tcp on 192.168.1.15
Discovered open port 548/tcp on 192.168.1.15
Discovered open port 3689/tcp on 192.168.1.15

Yes, I'm not sure what is up with their tech support. I think they inherited a somewhat underwhelming product that had unrealized potential. I think it suffers from too much compromise on hardware for what they were trying to accomplish in software. It is somewhat maddening that they refused to use ssh to diagnose the problem. That is why it exists. I had it enabled when i first acquired this product to fix an issue at tech support's request. It appears everything booted up but something is wrong with the appweb service. The service is running but doesn't respond to connection attempts on 80 or 443. It isn't listening on the web ports. I still haven't heard back from their escalated support team. I wonder if it really exists? I've seen many other forums where a support issue got stuck here. The storage problem has worsened. I was copying all my data off when, in the middle, the share quit responding. The box would not power down, reboot or reset. I tried pulling power but still could not access the main share when it came back up where most my critical data resides. I connected in with ssh and traversed the directory tree, the base folder is there where the share would be advertised, but all the data is gone! I didn't get anywhere near a full copy completed. There are some other minor shares I had created and they still work, but I still cannot access the box via the appweb service, even though the process is running. Fortunately I can recover most my important data because I was also backing it up with Crash Plan (thank god!) but this will be very time consuming. I can't even begin to express how frustrating this process has been, not to mention the countless hours trouble shooting. Long story short, I wouldn't trust any important data on this device. I've ordered a Synology DS213j with two 3TB Western Digital RED drives to replace this. If I can get the ix2 repaired I will only use it for lab unless someone wants to buy it off me. -- thanks, David

Web page entries not responding in Firefox that work on Safari.

1.
http://www.buytickets.firstgreatwestern.co.uk/combinedmatrix.aspx?Command=TimeTable
After selecting 'Show prices' page does not move on. Using 'Back' to show prices and selecting ticket no 'Next' button appears.
2.
https://uk.virginmoneygiving.com/fundraiser-web/donate/makeDonationForFundraiserDisplay.action?fundraiserActivityId=181498
On selecting 'Other' the amount box shows steady caret and will not accept input from keyboard, though the message box will show flashing caret and accept input.
The page does not freeze. Cache has been cleared.
These problems do not happen when using Safari 5.1.2

Hi,
Please also check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

TouchSmart Web App is not Responding - Please Try Again Later - THIS FORUM DOES NOT RESPOND EITHER

I have posted this issue before.
The Web Apps services DOES NOT WORK on the HP Envy printer.
Nobody at HP s bothered or concerned about this!!!!!
I have just spent £250.00 on a printer that does not work correctly.
Everything else works i.e. airprint, wireless printing, email printing SO DO NOT ASK METO DISABLE/RE-ENABLE SERVICES.
I wonder how many times it will take for me to post this to get a response.
Not Happy HP.
This question was solved.
View Solution.

Hello annesley,
I apologize that no one has gotten back to you but I'd like to explore your issue a little mroe to see if we cannot get this problem resolved for you.
If you could provide me with a few bits of information, I'd greatly appreciate it.
1. Please print a printer status report from the front panel of the Printer. To do this, on the front panel, press the Tools button (looks like a wrench) > then Printer Status Report. Once this page prints out, underneath the Product Information Header, there should be a field for Firmware Version. Please report to us which version you have.
2. If you could inform us as to who you used for your Internet Service, we'd greatlly appreciate it. An ISP is somebody like Qwest, Comcast, CableOne, Timewarner, Cox, and etc.
3. Also your router make and model would help as well.
This will help narrow down some possible reasons for your problem with the Web Apps portion of our Web Services.
M. Moss
Click on the BLUE KUDOS button on the left to say "Thanks"
If my reply solves your issue, please mark it as solved to help fellow users fix their similar issues!
Though I am an HP Employee, ALL of my posts express MY opinion, and not of HP, whatsoever.

Anything on the top Inch and A half of My web page Will not Respond to A mouse Click

I just started using Firefox but anything on the top Inch to Inch and a half of the page I can not Click on every time I click it's like nothings there if I click Twice the web Browser gets Smaller it's Like it Doesn't recognize the top of the page.

The Yahoo! Toolbar extension has been reported to cause this issue.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can keep an eye on this thread:
*[[/forums/contributors/707748]]

Typed web adresses do not respond

suddenly when I type www. addresses & hit enter; I am not being taken to the address.
I'm guessing it's some sort of setting?

Hi breakawayfun,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps!

I have problem with safari web content show up that not responding

Hi apple support and other member
My name is Oliver ..I using MacBook Pro (15-inch, Mid 2012) | Processor 2.6 GHz Intel Core i7 | 8 GB 1600 MHz DDR3 | and update to OS X yosemite version 10.10.2
I have a problem with my safari it show up that web content is not responding..What should i do because it happen all most every time in open up safari ? Pls help and give a advice ?
Thank you
Oliver Chu

Hello, Oliver Chu.
Thank you for visiting Apple Support Communities.
I understand that you are experiencing an issue with the performance of Safari. I would start with clearing Safari History and Website Data. If the issue persists, you may need to take a look at the troubleshooting steps in the second article.
Reset Safari
Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
Cheers,
Jason H.

CIMC Web/SSH interface not responding

Similar Messages

Maybe you are looking for