Cin : Bought out parts

Dear gurus,
I have to clarify the following process requirement for mapping in SAP.
Client procures some bought out parts, they do not process these items and directly sell them to customer. Now form excise point of view how we should treat these materials and how we have to hadle them through out MM, PP and SD process with CIN?
Manoj

this is more related to business process adopted by client. U need to finalise the process followed by ur client i.e. whether they are going to avail credit on e.d. paid to their vendors or not, whether they are going to show E.D. in their invoice etc.
So u better talk to excise experts in ur company.

Similar Messages

How do I know if my contract is being bought out?

There are some people in my area who have been receiving mail stating their contract is being bought out by AT&T. I have not received any correspondence regarding this. However, when I am on the Verizon wireless website it directs my to a page stating the area I am in is transitioning to AT&T. How do I know if I am affected by this. I am considering upgrading my phone, but don't want to if I am going to be bought out. Any help would be great.

Most of those people should have been/will be transitioned. It is dependent on your billing address and/or phone number. Where are you located at?
Only certain areas of Nebraska, Michigan, and Minnesota had Verizon customer accounts and towers sold to AT & T as part of the requirements of the FCC approval for the Alltel/Verizon merger.
http://www.cellularmaps.com/alltel_divest.shtml

When my screen saver has been on a while, I have to use the cursor to "rub out" part of the screen saver to see my login section. Can anyone help me with this?

When my screen saver has been on a while, I have to use the cursor to "rub out" part of the screen saver to see my login section. Can anyone help me with this?

I don't have a solution for you, but just wanted to let you know I used to have the exact same problem. I resolved it (for the most part....about 90% of the time, anyway) by adjusting the screensaver and power settings to never let the computer go to sleep.

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if I

I need to edit out parts of a song to cut it down to two minutes for my daughter's talent show. I went to info/start time and it will cut down one part but only one part. I need to put three parts together. I tried adding duplicates of the song to the list but if If I change the start time on one it will change it on all of them.

In your library, right-click the song you want to edit.
select "get info".
go to "options" and select the start and stop times for your first section of the song.
click "OK".
Find the shortened version of the song in your library. It may take a minute for it to show up. right click it again and select "create (????) version". (the ???? is different for different formats).
The library will spit out a new, second version of the song which you can rename. I suggest you use the original title and add a 1 to the end.
Now you can go back to the other version and repeat the process with a different start/stop time.
Once you are done editing, you can burn all of your versions to a disk, just make sure your interval time is zero so there are no gaps between edits.
To keep the orginal song on your library, just go back to the original and put the start/stop times back to the original settings.

Zoom only works on outer parts of photo

Very strange thing happening in LR5.6. When I go to zoom in on an image it only works on the outer 2/3s of the photo. it seems I can't zoom when clicking in the center. Same goes for when it is zoomed and I want to click the centre and drag to move to recenter the photo somewhere else. If I click on the centre it just does nothing. Also I can see that normally when I hover the mouse over the image, it shows the magnifying glass over those outer parts but when I move to the middle it just shows the mouse pointer, and same for when zoomed, the hand icon changes to mouse pointer. Anyone have any ideas what could be wrong?
I am running a brand new iMac on OSX 10.9.4 Mavericks and have the CC version of LR installed and updated. The problem seems to be sporadic so I'm not sure if it's an Apple problem?
AAron

I'm having the same problem with the iWeb 09 Hit Counter on MobileMe. It worked fine until I republished the site under a new name. Now I can't get it to appear no matter what I try (including moving it around in the 150 px footer area. The javascript looks fine in the source code (see below), so I'm wondering if this is an iWeb/MobileMe bug? My hunch is that the javascript call to get the counter is not working correctly on the server end. Here's the code that also shows the proper footer value:
<script type="text/javascript"
src="http://web.me.com/i/chp/NGHitCounter.js"></script><script type="text/javascript"
src="http://web.me.com/rbrisson2/.Counters/63346ED0-8119-49BB-8DE5-8EC27C322A09?webda v-method=propget&counter"></script>
Any help on how to fix this “break” in the javascript call would be appreciated!

MRP getting access schedule for bought out component.

Dear friends,
While running MRP , i am getting access Schedule line (at least 200 time from existing plan) for Bought out component , pl guide what can be the things going wrong so i can generate exact schedule.
I have to run MRP today.
Regards
Kamal Pareek

HI Ram,
I have run MRP ie maintaining independent requirement in MD61, at background.using T Code MDBT.
while analysis found through MD04 and MD05 that very high Qty schedule lines are generated for Some brought out component, in pegged requirement drilldown system give 200-300% schedule line big qty for some materials, under
" Procurement without requirement".
WHILE RUNNING PEGGED DRILLDWON IT SAYS " PROCUREMENT WITHOUT REQUIREMENT SHOWS "
i am not able to understand the exact reason for high qty. (there is no openPLAN/ production order/sales order/purchase order) . your help will give confident to overcome this issue.
Regards
K P

HT5037 I've downloaded iPhoto Library upgrader and run the install but can't find the app to run it. Consequently, I cannot open iPhoto. I upgraded from 7 to the latest version to get my photo books feature back. Has Apple been bought out by Microsoft?

Please help... cannot access my photos...

More details would help more then snit remarks about Apple being bought out by Microsoft.
Such as if you have relocated iPhoto from /Applications.
Allan

Bought -Out Items

Hello Experts,
Is there any table/Report available in SAP where in I can get requisite WBS no. after passing the network no.?
i.e. which network is linked with which WBS?
Our business scenario is of bought -out items where we are charging against the network and based on that we are creating the sales order. Hence, I need a table/report which can give me the interlinking of network with WBS.
I checked
Please sugget/help...
Thanks & Regards,
Ankur

Check the AUFK table. Input the WBS element and execute. You will get the network number. You can even check this in CJ20N itself. Just open the project and click on the project definition. On the right hand side click on the network overview. You should get the assignments here also.

HT4623 Hi I have the first iPad that was bought out is there an iso update for it ?????

Hi I have the first iPad that was bought out , is there an iso update for it ??????????

The Original iPad can only be updated to IOS 5.1.1

Simple, yet not so. How can I just edit out part of a track. Help says select the region in the timeline, but doesn't seem to be able to perform a most basic function of cut and paste

Hi folks, anyone out there know how to select a region in the timeline so I can delete just part of a track. I am making a soundtrack and want to fade in and out mp3's that I drag onto the track.
Thanks.
I feel dumb.

Hermsboy wrote:
how to select a region in the timeline so I can delete just part of a track [the region in the track]
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)

Cutting out part of a photo and reshaping

Dear illustartors,
this may be a photoshop or illustartor question, I'm not sure. Here's what I want to do:
take part of a photo and cut it out - the shape isn't regular, something of a rough rectangle
take the cut out shape and reshape it, I need to move two oof the corners in to form a rough trapezium
I want the contents of the cutout shape (part of a photo) to shrink appropriately within the reshaped object... Imagine the shape is an old door, The shape wouldn't exactly be a rectangle because it's a bit beaten up; having cut it out I want to make the new shape but still see the edges, coners and panels, he new shap will be the same hieght on the left-hand side but reduced on the right-hand side - as if creating perspective.
Is this possible somehow?
thank you......................... liz

Thank you wade I will have a go!
UPDATE: yes that's good. I created a "sunray" using a line which I transformed to have as many lines as the mesh I used (actualy it had half the number plus 1 for the lower half of the sunray, then repeated the operation fo an identical line on top of the first but wit the ange of transformation = to 360 - the angle of the first line's transformation) and made the line long enough to get the perspective right, this I then used as a guide to move the mesh lines. The only thing I would have liked is to a) lock the verticalsin the mesh so I didn't move them inadvertently and b) if I could have moved the beginning and end point of a mesh horizontal and said now redrawn the line between these two points it would have been quicker. (I was using illustrator)

Pull out part of string

I have program that gives me the following data:User[type=Call Manager User,id=usersname,authenticated=true]I need to pull out just the part that is "usersname"
The length of this part is variable, the rest is not.
I don't normally program and am not very java familiar at all all.
Thanks in advance!!

Assuming the data you have is a String, and as you have said, it will always be the same apart from the id part, you could use the split method followed by the substring method to isolate the part you need. Something like:
String[] arr = yourString.split(",");
String id = arr[1].substring(3);Basically, you split the string into an array, using the commas as the delimeter, which will put "id=usersname" in the 2nd element of the array. Then, use the substring method to get the part of the string after the first 3 characters, "id=". Hope that helps.

PSE 8 (OSX) Drop out part of photo to reveal another?

I am guessing it's possible to crop inside one photo, drop that part out, and thereby reveal a photo underneath.
But I can't find any hook in Help (or in The Missing Manual) to let me start researching it.
Is it possible?
Can you give me an idea how to do it? Or at least what to search for in order to read about it?
Thanks in advance.

Sure. Siimplest way is to layer the two photos together (since you have the book, it's like the directions for doing a manual exposure blend in the sidebar in chapter 8) and just use the eraser tool, or select what you want to get rid of and delete it from the top photo. Helps to feather or refine edge before deleting (all that is in chapter 5).

How do I edit out parts of a waveform?

I have a waveform of a bass/could be a vocal track too. there are notes or words or string noise that i want to cut out but i dont want to chop it out just select the bad parts between the good and insert silence. How can i do that?

You might have a look over here:
http://www.youtube.com/watch?v=bb5ouf03drA&feature=share&list=PLWUJymHcOOm2olgFR mHElQsDSA9ppqWBN
Have a nice day!

Zoom in/out part of a picture

Dear All,
Could anyone please explain how to zoom in/out a particular part of a photo in AE? I had the tutorial once but I seem to have difficulty finding it. It had something to do with 'the anchor point'. It is a simple task with just a few steps but I cannot remember.
Thank you very much.
Palinkasocsi

When you scale an image, it scales around the anchor point.
This search pulls up a few tutorials about panning and zooming an image and using the anchor point to control the center of the zoom/scale.

Cin : Bought out parts

Similar Messages

Maybe you are looking for