CIN Capabilities
Hi All,
I've been searching postings related to CIN but couldn't find an appropriate answer to my requirement.
Here's our company's business process overview, pl provide the capabilities/feasibility of CIN to map these scenarios.
Based on your questions and replies I'll provide more detailed info. Your inputs will help me in my study. Thanks. Vamshi.
1. Manufacturing plant located in SEZ (Chennai/India)
a. Exports (100% exempted)
b. Imports (from overseas vendors)
c. Imports (DTA)(P2P Stock Transfer to our own company' warehouses in India, Storage location under virtual plant)(Gross duty value= MRP rate*Quantity; (Abatement)Deduct 35% from total value and remaining 65 % is considered as net duty payable value; Duty is calculated @ 2.06% on net duty payable value)
d. Local Procurement(Import from vendor within India)(Along with all the import documents ARE1 will be attached. ARE1 will be issued by the supplier customs authority. To avail the duty benefit we will acknowledge the receipt of goods and send back the ARE1 form to supplier)
2. Warehouse/Storage loc (Import from overseas plants, our own plants under different company code, Intercompany P2P)
(Stock transport invoice)
3. Warehouse/Storage loc (Sales to India customers, stocks which were procured from Chennai and overseas plants)
(CHA at SEZ&Warehouse(airport) prepares BOE,Shipping Bill and process all excise/legal requirements with customs; as we are paying CHA commission per each shipment clearance can CIN save us this cost?)
Hi All,
Can anyone provide comments or suggestions to my requirement?
Regards,
Vamshi
Similar Messages
-
CIN Capabilities (Mobile Manufacturing Industry)
Hi All,
I've been searching postings related to CIN but couldn't find an appropriate answer to my requirement.
Here's our company's business process overview, pl provide the capabilities/feasibility of CIN to map these scenarios.
Based on your questions and replies I'll provide more detailed info. Your inputs will help me in my study. Thanks. Vamshi.
1. Manufacturing plant located in SEZ (Chennai)
a. Exports (100% exempted)
b. Imports (from overseas vendors)
c. Imports (DTA)(P2P Stock Transfer to our own company' warehouses in India, Storage location under virtual plant)(Gross duty value= MRP rate*Quantity; (Abatement)Deduct 35% from total value and remaining 65 % is considered as net duty payable value; Duty is calculated @ 2.06% on net duty payable value)
d. Local Procurement(Import from vendor within India)(Along with all the import documents ARE1 will be attached. ARE1 will be issued by the supplier customs authority. To avail the duty benefit we will acknowledge the receipt of goods and send back the ARE1 form to supplier)
2. Warehouse/Storage loc (Import from overseas plants, our own plants under different company code, Intercompany P2P)
(Stock transport invoice)
3. Warehouse/Storage loc (Sales to India customers, stocks which were procured from Chennai and overseas plants)
(CHA at SEZ&Warehouse(airport) prepares BOE,Shipping Bill and process all excise/legal requirements with customs; as we are paying CHA commission per each shipment clearance can CIN save us this cost?)Manufacturing plant located in SEZ (Chennai)
Yes can be handled in SAP. Refer the link for understanding - [SEZ Sales|http://wiki.sdn.sap.com/wiki/display/ERPLO/Deemed+Export]
Exports (100% exempted)
- about Export & deemed export procedure
- [EXPORT|http://www.indiandata.com/trade_policy/export_procedures.html]
- [Export Docs required|http://www.indianindustry.com/trade-information/documents-required.html]
Kindly put your query for Procurement in following forum for better answers:
Hope this suffice your requirment.
Thanks & Regards
JP -
THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help! -
How do you disable the uploading capabilities in Adobe Creative Cloud?
Is there a way to disable the uploading capabilities for Adobe Creative Cloud?
I just want users to get the downloads for their Adobe Products and not be able to upload anything to the cloud.
Any input would be greatly appreciated. If there is a solution, please send me documentation or a "how to". That would be very greatly appreciated!Stop paying, the programs stop working
This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
-cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
Error Reading Header File When Creating a CIN
Hello everyone. I am a college student new to LabView and Im using the
software to create a real time data acquisition system for EMG signal
analysis for a research project. However, Im having difficulty building
a CIN for my C code. I am using Microsoft Visual Studio.NET 2003 and
running LabView 7.1 on Windows XP. I am using the "Using External Code
in LabView" (April 2003 Edition) manual and I am attempting to do the
steps located in section 3-15 under Visual C++ IDE. However, I keep
getting fatal error C1083: Cannot open include file: 'extcode.h': No
such file or dir. I have followed all of the directions in the manual
and even explicitly tried adding extcode.h to my project but I
still get this error. My version of Visual Studio is different then the
one described so I was wondering if there is something different that I
have to do in this process. Any help would be greatly appreciated.
Thanks for your time.
PatIs there a particular reason you're not using a Call Library Function Node to call a DLL instead of using a CIN? Calling DLLs from Call Library Function Node are usually a much more user-friendly process, which I would recommend, unless you need to take advantage of the extra features listed on page 1-4 of Using External Code in LabVIEW.
Jarrod S.
National Instruments -
How do I use the WriteToMemoryXX functions in a CIN?
I'm getting a linker error "unresolved external reference _WriteToMemory16" when I compile the C code that contains the calls to the WriteToMemory16 function. I've installed the accesshw files and am including the accesshw.h file in my C-code CIN. It would seem that I need to compile-in the code for the WriteToMemory function, which I assume resides in accesshw.c.
My application calls for some direct hardware i/o that falls in the "too messy to do in a block diagram" catagory. I'm using Labview 5.1.1 and talking to a Keithley Metrabyte PIO-96 card.
Thanks very much for any assistance.Ben,
Thank you for the response. I looked at the examples you mentioned, but unfortunately I'm still unsure what to do. As mentioned, I downloaded the accesshw.zip file and installed the files in order for me to use InPort and OutPort VIs in my program on an NT box, which I'm doing and is working fine. Also, I downloaded the example, "PCI-DIO using AccessHW_DLL.c". This C file contains calls just like the ones I want to use (calls to WriteToMemoryXX) in my CIN C code to basically do the same operations as are done by the InPort and OutPort VIs. Is there a makefile available for that C file? Maybe if I knew how to build that file into a CIN, it would be the same process for me to build my file into a CIN. There is an include file in the "PCI-DIO using AccessH
W_DLL.c" file that I don't have (ansi_c.h), but I don't get a compiler error when not including this file in my C file so
I assume I don't need it. I've got the accesshw.dll file in the same directory as my .c file, as instructed to do on the accesshw.zip download page.
I'm developing the CIN using MSVC++ 4.0 if that helps.
Thanks very much,
Jeff -
How can I get Wireless N 5MHZ Capabilities Dual Band up to 300MHZ on my DV7 Laptop?
How can I get Wireless N 5MHZ Capabilities Dual Band up to 300MHZ on my DV7 Laptop?
Question for 4/18 experts ...
Or specifically, how can I replace my wireless card on a DV7-6B32US and upgrade to Intel Centrino 6230?
I have a relatively new DV7-6B32US puchased on 11/2011. Still under warranty. purchased 2 of the laptops. (also own 3 hp desktops and 1 HP All in One)
Existing card is wireless N but does not support 5GHZ or dual band. It is Broadcom 4313 wifi card and I am just realizing that the Broadcom card does not do the dual band 5GHZ wireless N. I have Linksys e4200 router which supports 5GHZ and dual band speeds up to 300 Mbps.
I called tech support and with their help identified Intel Centrino 6230 as the correct upgrade, and with their help ordered 631956-001. In the Maintenance Manual for DV7 laptop, this part number was listed for Intel Centrino 6230. Turns out HP sends an Intel Wireless N 1030 card, which is no better than my existing card. I called HP and they acknowledged that some manuals use part number 631956-001 for Centrino 6230 and some use 631956-001 for INtel 1030. So HP support said they would give refund but case manager was of no help in solving the upgrade problem. Said it was unavailable but here is your money back.
So after more searching, I see others have used part number 636672-001 to order Intel Centrino 6230, specifically for HP ProBook 4530s, 4230s, 4730s. And if I use part number 636672-001 and go thru parts store at HP, I can purchase it.
But will it work??
First, will the Intel Centrino 6230 with part number 636672-001 from HP parts, work in my HP DV7-6B32US, even though the part number is NOT listed in the Maintenance and Service Guide for my specific laptop. I see postings about whitelists and changing bios, etc, and am hoping someone can provide some guidance. I have been thru 2 tech support calls and one case manager and have gotten 3 different feedback from HP, from yes it will work and ordering the part, to buy it on amazon, to it will not work and here is your money back.
Second, I see some postings about Centrino 6230 and multiple antenna's. When I replaced the Broadcom 4313 with the Intel 1030 card, I simply unattached 2 wires and reattached the wires. And it worked. I am wondering if the reason HP doesn't list the 6230 card for DV7 is that DV7 does not have the antennas required to support 6230. Does the Centrino 6230 require 3 antennas?
Thanks for any suggestions. The existing cards do work but I paid extra for the Linksys e4200 Router and just assumed a winter 2011 $700 laptop from HP would use the latest wireless n technology, otherwise I would just keep existing cards.I have went thru the exact same problems trying to upgrade the wireless card in my DV7. It is very frustrating that the wireless card can't be upgrade to one that supports 5Ghz. Here is my post from the network forum. http://h30434.www3.hp.com/t5/Wireless-Internet-Home/Unsupported-Wireless-LAN-6230/td-p/1419595 Doesn't sound like it is possible to upgrade to the Centrino 6230 without it being added the the "white list". Sound like HP doesn't update the list after shipping the notebook. I feel your pain. HP needs to help out the consumer in upgrading the wireless cards. I see we are not the only ones that have had this problem.
-
MM period opening/closing in CIN
Dear All,
After go live the users are entering the backlog date of the pervious months.
the data of August is still not complete so the periods are not closed and they want to making entries in Sept.
if we allow back period posting and close the august month and open the sept month, what will be the issues-
<b>especially in CIN.</b>
the sales activities are still pending.
the client is forcing for this. can anybody guide on this issue or have sap documentation on this can forward me at;
[email protected]
thanking you in advance
regards
ramprasadthank you very much vikas,
any impact on utilisation, excise registers enteries and internal serial number in register
what i see is say somebody is posting excise invoice for the month of august and system has taken the number as 5. say afterwards somebody post for the month of sept. then it will get internal excise number as 6.
so the sequence of excise invoices captured will not remian as per month.
if you can visualise anything more ,for advice will be of great help.
regards -
Clients disconnect because of Capabilites change
Hi all,
recently we migrated AIR-LAP1131AG APs from a 4402 WLC running 4.1.185.0 release to a 5508 running 7.6.130.0. After we did that some clients constantly disconnected and reconnected. I strongly assume it has something to do with the additional features that were introduced between the releases.
During debugging I saw that after the client entered the RUN state that it got disconnected with the following error:
*spamApTask0: Mar 31 01:57:27.649: xx:xx:xx:xx:xx:xx Association Failed on REAP AP BSSID yy:yy:yy:yy:yy:yy (slot 0), status 1 0 Capabilities changed
Here is the whole debug output (X is the client, Y is the AP, Z are other APs for the group key)
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Adding mobile on LWAPP AP yy:yy:yy:yy:yy:yy(0)
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Association received from mobile on BSSID yy:yy:yy:yy:yy:yy
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Global 200 Clients are allowed to AP radio
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Max Client Trap Threshold: 0 cur: 0
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Rf profile 600 Clients are allowed to AP wlan
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx override for default ap group, marking intgrp NULL
*apfMsConnTask_3: Mar 31 01:57:17.623: xx:xx:xx:xx:xx:xx Applying Interface policy on Mobile, role Unassociated. Ms NAC State 0 Quarantine Vlan 0 Access Vlan 0
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Re-applying interface policy for client
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2219)
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:2240)
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx apfApplyWlanPolicy: Apply WLAN Policy over PMIPv6 Client Mobility Type
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx In processSsidIE:4850 setting Central switched to FALSE
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Applying site-specific Local Bridging override for station xx:xx:xx:xx:xx:xx - vapId 5, site 'default-group', interface 'irglbxv'
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Applying Local Bridging Interface Policy for station xx:xx:xx:xx:xx:xx - vlan 14, interface id 14, interface 'irglbxv'
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx STA - rates (4): 2 4 11 22 0 0 0 0 0 0 0 0 0 0 0 0
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx STA - rates (12): 2 4 11 22 12 18 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Processing RSN IE type 48, length 20 for mobile xx:xx:xx:xx:xx:xx
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Updating AID for REAP AP Client yy:yy:yy:yy:yy:yy - AID ===> 1
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state START (0)
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state AUTHCHECK (2)
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Encryption policy is set to 0x80000001
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Central switch is FALSE
*apfMsConnTask_3: Mar 31 01:57:17.624: xx:xx:xx:xx:xx:xx Sending Local Switch flag = 1
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx 0.0.0.0 8021X_REQD (3) DHCP required on AP yy:yy:yy:yy:yy:yy vapId 5 apVapId 5for this client
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx Not Using WMM Compliance code qosCap 00
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP yy:yy:yy:yy:yy:yy vapId 5 apVapId 5 flex-acl-name:
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx apfMsAssoStateInc
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx apfPemAddUser2 (apf_policy.c:333) Changing state for mobile xx:xx:xx:xx:xx:xx on AP yy:yy:yy:yy:yy:yy from Idle to Associated
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx apfPemAddUser2:session timeout forstation xx:xx:xx:xx:xx:xx - Session Tout 0, apfMsTimeOut '0' and sessionTimerRunning flag is 0
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx Func: apfPemAddUser2, Ms Timeout = 0, Session Timeout = 0
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx Sending Assoc Response to station on BSSID zz:zz:zz:zz:zz:zz (status 0) ApVapId 5 Slot 0
*apfMsConnTask_3: Mar 31 01:57:17.625: xx:xx:xx:xx:xx:xx apfProcessAssocReq (apf_80211.c:8294) Changing state for mobile xx:xx:xx:xx:xx:xx on AP yy:yy:yy:yy:yy:yy from Associated to Associated
*spamApTask0: Mar 31 01:57:17.708: xx:xx:xx:xx:xx:xx Sent 1x initiate message to multi thread task for mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.708: xx:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station xx:xx:xx:xx:xx:xx (RSN 2)
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Resetting MSCB PMK Cache Entry 0 for station xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Setting active key cache index 8 ---> 8
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Setting active key cache index 8 ---> 0
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Adding BSSID yy:yy:yy:yy:yy:yy to PMKID cache at index 0 for station xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: New PMKID: (16)
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: [0000] 95 e5 c8 10 ba cc 57 e5 1d 4c ab ae c3 eb 0c f5
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Initiating RSN PSK to mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx EAP-PARAM Debug - eap-params for Wlan-Id :5 is disabled - applying Global eap timers and retries
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx dot1x - moving mobile xx:xx:xx:xx:xx:xx into Force Auth state
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Skipping EAP-Success to mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx EAPOL Header:
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: 00000000: 02 03 00 5f ..._
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Found an cache entry for BSSID yy:yy:yy:yy:yy:yy in PMKID cache at index 0 of station xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Found an cache entry for BSSID yy:yy:yy:yy:yy:yy in PMKID cache at index 0 of station xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: Including PMKID in M1 (16)
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: [0000] 95 e5 c8 10 ba cc 57 e5 1d 4c ab ae c3 eb 0c f5
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Starting key exchange to mobile xx:xx:xx:xx:xx:xx, data packets will be dropped
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Sending EAPOL-Key Message to mobile zz:zz:zz:zz:zz:zz
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Sending EAPOL-Key Message to mobile zz:zz:zz:zz:zz:zz
state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx Allocating EAP Pkt for retransmission to mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.709: xx:xx:xx:xx:xx:xx mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:01 mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.710: xx:xx:xx:xx:xx:xx mscb->apfMsBssid = yy:yy:yy:yy:yy:yy mscb->apfMsAddress = xx:xx:xx:xx:xx:xx mscb->apfMsApVapId = 5
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.710: xx:xx:xx:xx:xx:xx dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 0 mscb->apfMsLwappMwarInet.ipv4.addr = 171969037
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.710: xx:xx:xx:xx:xx:xx mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 173667675 mscb->apfMsLwappLradPort = 23341
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Received EAPOL-Key from mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Received EAPOL-key in PTK_START state (message 2) from mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Stopping retransmission timer for mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx EAPOL Header:
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: 00000000: 02 03 00 5f ..._
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Sending EAPOL-Key Message to mobile zz:zz:zz:zz:zz:zz
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Sending EAPOL-Key Message to mobile zz:zz:zz:zz:zz:zz
state PTKINITNEGOTIATING (message 3), replay counter 00.00.00.00.00.00.00.01
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx Reusing allocated memory for EAP Pkt for retransmission to mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx mscb->apfMsLwappLradNhMac = 00:00:0c:07:ac:01 mscb->apfMsLradSlotId = 0 mscb->apfMsLradJumbo = 0 mscb->apfMsintIfNum = 1
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.792: xx:xx:xx:xx:xx:xx mscb->apfMsBssid = yy:yy:yy:yy:yy:yy mscb->apfMsAddress = xx:xx:xx:xx:xx:xx mscb->apfMsApVapId = 5
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.793: xx:xx:xx:xx:xx:xx dot1xcb->snapOrg = 00 00 00 dot1xcb->eapolWepBit = 0 mscb->apfMsLwappLradVlanId = 0 mscb->apfMsLwappMwarInet.ipv4.addr = 171969037
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.793: xx:xx:xx:xx:xx:xx mscb->apfMsLwappMwarPort = 5246 mscb->apfMsLwappLradInet.ipv4.addr = 173667675 mscb->apfMsLwappLradPort = 23341
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx Received EAPOL-Key from mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx Received EAPOL-key in PTKINITNEGOTIATING state (message 4) from mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx Stopping retransmission timer for mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx Freeing EAP Retransmit Bufer for mobile xx:xx:xx:xx:xx:xx
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx apfMs1xStateInc
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.897: xx:xx:xx:xx:xx:xx 0.0.0.0 8021X_REQD (3) Change state to L2AUTHCOMPLETE (4) last state 8021X_REQD (3)
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx Central switch is FALSE
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx Sending the Central Auth Info
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx Central Auth Info Allocated PMKLen = 32
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx PMK: pmkActiveIndex = 0
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
apfMsEntryType = 0 apfMsEapType = 0
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx Sending Local Switch flag = 0
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 L2AUTHCOMPLETE (4) DHCP required on AP yy:yy:yy:yy:yy:yy vapId 5 apVapId 5for this client
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx Not Using WMM Compliance code qosCap 00
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP yy:yy:yy:yy:yy:yy vapId 5 apVapId 5 flex-acl-name:
*spamApTask0: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx spamEncodeCentralAuthInoMsPayload: msAssocTypeFlagsMsb = 0 msAssocTypeFlagsLsb = 2
apfMsEntryType = 0 pmkLen = 32
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state L2AUTHCOMPLETE (4)
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 6178, Adding TMP rule
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
type = Airespace AP - Learn IP address
on AP yy:yy:yy:yy:yy:yy, slot 0, interface = 1, QOS = 0
IPv4 ACL ID = 255, IPv
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 15206 Local Bridging Vlan = 14, Local Bridging intf id = 14
*Dot1x_NW_MsgTask_7: Mar 31 01:57:17.898: xx:xx:xx:xx:xx:xx 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (IPv4 ACL ID 255, IPv6 ACL ID 255, L2 ACL ID 255)
*pemReceiveTask: Mar 31 01:57:17.900: xx:xx:xx:xx:xx:xx 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*apfOrphanSocketTask: Mar 31 01:57:18.904: xx:xx:xx:xx:xx:xx Orphan Packet from STA - IP 10.89.246.63
*apfOrphanSocketTask: Mar 31 01:57:18.904: xx:xx:xx:xx:xx:xx apfMsRunStateInc
*apfOrphanSocketTask: Mar 31 01:57:18.904: xx:xx:xx:xx:xx:xx 10.89.246.63 DHCP_REQD (7) Change state to RUN (20) last state DHCP_REQD (7)
*apfOrphanSocketTask: Mar 31 01:57:18.904: xx:xx:xx:xx:xx:xx Assigning Address 10.89.246.63 to mobile
*pemReceiveTask: Mar 31 01:57:18.905: xx:xx:xx:xx:xx:xx 10.89.246.63 Removed NPU entry.
*dot1xMsgTask: Mar 31 01:57:19.863: GTK Rotation Kicked in for AP: zz:zz:zz:zz:zz:zz SlotId = 0 - (0x3ff07bf8)
*dot1xMsgTask: Mar 31 01:57:19.863: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 1
*dot1xMsgTask: Mar 31 01:57:19.863: GTK rotation for zz:zz:zz:zz:zz:zz
*dot1xMsgTask: Mar 31 01:57:19.863: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:19.863: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 2
*dot1xMsgTask: Mar 31 01:57:19.863: GTK rotation for zz:zz:zz:zz:zz:zz
*dot1xMsgTask: Mar 31 01:57:19.864: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:19.864: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 3
*dot1xMsgTask: Mar 31 01:57:19.864: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:19.864: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 4
*dot1xMsgTask: Mar 31 01:57:19.864: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:19.864: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 5
*dot1xMsgTask: Mar 31 01:57:19.865: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*mmMaListen: Mar 31 01:57:20.863: xx:xx:xx:xx:xx:xx 10.89.246.63 RUN (20) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
*mmMaListen: Mar 31 01:57:20.863: xx:xx:xx:xx:xx:xx 10.89.246.63 RUN (20) Reached PLUMBFASTPATH: from line 5850
*dot1xMsgTask: Mar 31 01:57:21.263: GTK Rotation Kicked in for AP: zz:zz:zz:zz:zz:zz SlotId = 0 - (0x3ff07bf8)
*dot1xMsgTask: Mar 31 01:57:21.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 1
*dot1xMsgTask: Mar 31 01:57:21.263: GTK rotation for zz:zz:zz:zz:zz:zz
*dot1xMsgTask: Mar 31 01:57:21.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:21.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 2
*dot1xMsgTask: Mar 31 01:57:21.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:21.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 3
*dot1xMsgTask: Mar 31 01:57:21.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:21.264: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 4
*dot1xMsgTask: Mar 31 01:57:21.264: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:21.264: Generated a new group key for AP zz:zz:zz:zz:zz:zz(0) - vap 5
*dot1xMsgTask: Mar 31 01:57:21.264: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*spamApTask0: Mar 31 01:57:27.649: xx:xx:xx:xx:xx:xx Association Failed on REAP AP BSSID yy:yy:yy:yy:yy:yy (slot 0), status 1 0 Capabilities changed
*spamApTask0: Mar 31 01:57:27.649: xx:xx:xx:xx:xx:xx apfMsDeleteByMscb Scheduling mobile for deletion with deleteReason 8, reasonCode 1
*spamApTask0: Mar 31 01:57:27.649: xx:xx:xx:xx:xx:xx Scheduling deletion of Mobile Station: (callerId: 30) in 1 seconds
*osapiBsnTimer: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx apfMsExpireMobileStation (apf_ms.c:6655) Changing state for mobile xx:xx:xx:xx:xx:xx on AP yy:yy:yy:yy:yy:yy from Associated to Disassociated
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Sent Deauthenticate to mobile on BSSID yy:yy:yy:yy:yy:yy slot 0(caller apf_ms.c:6749)
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Found an cache entry for BSSID yy:yy:yy:yy:yy:yy in PMKID cache at index 0 of station xx:xx:xx:xx:xx:xx
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Removing BSSID yy:yy:yy:yy:yy:yy from PMKID cache of station xx:xx:xx:xx:xx:xx
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Resetting MSCB PMK Cache Entry 0 for station xx:xx:xx:xx:xx:xx
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Setting active key cache index 0 ---> 8
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Deleting the PMK cache when de-authenticating the client.
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx Global PMK Cache deletion failed.
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx apfMsAssoStateDec
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx apfMsExpireMobileStation (apf_ms.c:6787) Changing state for mobile xx:xx:xx:xx:xx:xx on AP yy:yy:yy:yy:yy:yy from Disassociated to Idle
*apfReceiveTask: Mar 31 01:57:28.463: xx:xx:xx:xx:xx:xx pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfReceiveTask: Mar 31 01:57:28.464: xx:xx:xx:xx:xx:xx 10.89.246.63 START (0) Deleted mobile LWAPP rule on AP [yy:yy:yy:yy:yy:yy]
*apfReceiveTask: Mar 31 01:57:28.464: xx:xx:xx:xx:xx:xx Deleting mobile on AP yy:yy:yy:yy:yy:yy(0)
*dot1xMsgTask: Mar 31 01:57:30.263: GTK Rotation Kicked in for AP: zz:zz:zz:zz:zz:zz SlotId = 1 - (0x3ff07bf8)
*dot1xMsgTask: Mar 31 01:57:30.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(1) - vap 1
*dot1xMsgTask: Mar 31 01:57:30.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:30.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(1) - vap 2
*dot1xMsgTask: Mar 31 01:57:30.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:30.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(1) - vap 3
*dot1xMsgTask: Mar 31 01:57:30.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:30.263: Generated a new group key for AP zz:zz:zz:zz:zz:zz(1) - vap 4
*dot1xMsgTask: Mar 31 01:57:30.263: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
*dot1xMsgTask: Mar 31 01:57:30.264: Generated a new group key for AP zz:zz:zz:zz:zz:zz(1) - vap 5
*dot1xMsgTask: Mar 31 01:57:30.264: Sending of M5 for zz:zz:zz:zz:zz:zz is Skipped, rc = 1
Here is the configuration of the SSID on the 4402 and 5508 for comparison.
4402
WLAN Identifier.................................. 2
Profile Name..................................... xxxxx
Network Name (SSID).............................. xxxxx
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. Infinity
Interface........................................ xxxxxx
WLAN ACL......................................... unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Quality of Service............................... Silver (best effort)
WMM.............................................. Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Radio Policy..................................... All
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Disabled
WPA2 (RSN IE).............................. Disabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
CKIP ......................................... Disabled
IP Security................................... Disabled
IP Security Passthru.......................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Auto Anchor................................... Disabled
Cranite Passthru.............................. Disabled
Fortress Passthru............................. Disabled
H-REAP Local Switching........................ Disabled
Infrastructure MFP protection................. Enabled (Global Infrastructure MFP Disabled)
Client MFP.................................... Optional but inactive (WPA2 not configured)
Tkip MIC Countermeasure Hold-down Timer....... 60
Mobility Anchor List
WLAN ID IP Address Status
5508
WLAN Identifier.................................. 5
Profile Name..................................... xxxxx
Network Name (SSID).............................. xxxxx
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 3
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 86400 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... xxxxxxxx
CHD per WLAN..................................... Disabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ xxxxxxxx
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Disabled
mDNS Profile Name................................ unconfigured
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
PMIPv6 MAG Profile........................... Unconfigured
PMIPv6 Default Realm......................... Unconfigured
PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Disabled
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Disabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Disabled
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Disabled
WPA2 (RSN IE).............................. Disabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Disabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
FlexConnect Local Switching................... Enabled
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional but inactive (WPA2 not configured)
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
Eap-params.................................... Disabled
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Does anybody have an idea where else I could look at?
Regards,
PatrickI thought the same that those devices simply are too old. However I would like to know what causes this capabilities change. We want to get rid of the old H/W, but at the moment it looks as if we would need to revert back to the 4402 in order to get those things working again.
I have not enough information, but those devices are some kind of handhelds. Their MAC OUI belongs to Newport Electronics.
Regards,
Patrick -
Reqd. T-code in which list of customers display with CIN Details
Dear All,
Is there any t-code in which the List of Customers with cin details Display?Like the MKVZ,
this is the t-code for List of Vendors Display.
Thanks,
Sumit.Dear Sir,
I have found another t-code VCUST for customer detail but in this CIN DETAILS are not there.
so pls. suggest something...
Thanks,
Sumit. -
Batch Selection config. in Excise Invoice Creation (J1IJ) at Depot in CIN
Hi,
In the business scenario that I have to map in SAP system stock transfer occurs from Plant to Depot. Then the batch is split at the Depot and minor changes are made to characteristic. These individual small batches and then sold to the end customer from depot.
<b>Problem:</b> If the batch number is kept the same at depot as the incoming batch number, system is able to find the incoming invoice in J1IJ. If the batch number is changed (to mark individual characteristic) then the system in not able to idetify the incoming batch.
Please help...
In SAP help link http://help.sap.com/erp2005_ehp_02/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm I could find mention that "You can also automate this procedure, using the batch selection program (J_1IJCHK), by making the appropriate Customizing settings in the Country Version India (CIN) Implementation Guide (IMG)." Can anyone help by elobarinting what specific configuration is to be made for batch selection?
Thanks
RajatHi,
SAP has released a SAP note 1001446 which can be implemented for your requirement. There is an user exit J_1I7_USEREXIT_BATCH_CHK_FLAG which has the parameter NO_BATCH_CHK_FLAG. If you pass the value ' X' to the parameter NO_BATCH_CHK_FLAG then the batches will not be checked during J1ij. you can implement this user exit through SE37.
Regards,
Murali -
CIN - BED, AED & SED for the excise item is ZERO
DEAR ALL,
I am testing the CIN scanario with tax procedure TAXINJ.
While making GRN at excise invoice tab message is coming " BED, AED and SED for the excise item is zero" adn no any values for BED, AED and SED are flowing,
Value for BED is maintained in J1ID for the chapter ID. Also Tax code is created with JMO1 - IN: A/P BED deductible and value mainatained is 14 %.
PLease confirm me where I amd doing wrong ? Also please tell in TAXINJ on what paramaters the excise flows and shows the values while GRN OR whil posting a excise invoice ?
Regards,
RakeshDear ALL,
Below are the steps / settings I have done,
01. Copied TAXINJ to create tax procedure say ZAXINJ and assigned to country IN.
- Please confirm what needs to be AltCty & AltCBV for JMO1, JMOD, JMOP ?
02. Excise defaults maintained as per TAXINJ for ZAXINJ.
03. Acces sequenece maintained for JMO1, JMOP, JMOD is MWST - Tax code.
04. Then created Tax code say T1 - and % maintained as below
JMO1 - 100 %
JMOP - 100 %\
05. J1ID - maintained for vendor, plant, material etc.
05. Excise rate maintained in J1ID for chapter ID as 14 %.
06. Chapter ID maintained in material master.
07. PO created for the material with tax code T1 for the said vendor.
Still while GRN message comes "BED, AED & SED for the excise item is ZERO" and BED is not getting populated for BED.
Please confirm where I went.
Waiting eagerly for the valuabale inputs..
Regards,
Rakesh -
CIN process to enter Excise Invoice for Return Delivery
Folks
I would like to know How to process excise invoice for return delivery. We have return sales order, return delivery created and product is received into inventory Customer return Blocked stock (movement 657).
Where and How can i enter Excise invoice for this return (Credit Memo)?
I tried J1IH transaction--> Other Adjustments
I am getting following error.
GL account has not been assigned for RG23ASED in customization
Message no. 8I447
Diagnosis
GL account has not been assigned for the excise a/c in customization
Procedure
Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types"
Please helpJ1IIN is intended only for outgoing sales and not for returns.
For updation of excise related sales returns, run J1IH and do the following:-
Customer Credit
Choose the Additional excise input the original excise invoice reference, document year, company code, plant and excise group and execute. There input manually what value you need to give credit and save.
Cenvat Debit
Choose Other Adjustment and here also, maintain the datas whatever you input as above and save.
G. Lakshmipathi -
Central Excise and WHT Settings in CIN Version for 4.6C
hi sap gurus,
i need urgent support from your end regarding Central Excise and WHT Settings in CIN Version for 4.6C. I am new to CIN Version, and now i deputed to the same.
can any body give the configuration of the Central Excise and WHT Settings in CIN Version for 4.6C.
kindly revert back asap.
thanks and regards,
raghavHi
Go to transaction code J1iln you get all the details on CIN or you can go to logistics general > tax on Goods Movement in SPRO
Anand
Maybe you are looking for
-
I am running Windows 7 64 bit. This HORROR began because I realized that my phone had suddenly lost all of the music except music that had been purchased. It also lost all purchased iBooks as well as audible books downloaded from audible and rington
-
Install OS X on optical drive-challenged PB12 via TDM
Using Target Disk Mode, can an (Intel) 10.6 MBPro run a 10.5 (Leopard) clean-install on a (1.5 GHz PPC G4, 1.25 GB DDR SDRAM - Superdrive gone bonkers) PowerBook 12"? Another site negated this but I've found no other confirmation elsewhere. My daught
-
HT1541 i still cant get my code
i still can't get my code
-
How can i use RemoteObject without mxml?
hi: in my flex project , i use blazeds + puremvc , so i want to put my business code in actionscript as proxy to communicate with java code, the proxy code like : public function requestServer(page:PageInfo):void{ userServiceRM = new RemoteOb
-
ECM - no status update of IT0759 to "approved"
Dear all We are using the new iView "Planning Overview" in MSS for the higher-level Managers to review the planning of their subordinate organizational units. When an organizational unit is completed and the higher-level Manager reviews this organiza