CIN implementation - SAP patch level = 24
Hi,
We are on SAP patch level 24, current = 35. (SAP 4.7)
How do we implement CIN ? It has around 1000 OSS notes specific to CIN to reach upgarded SP 35 level. Does anyone have any experience how to attack this problem ?
Do we iimplement all patches and bring system to SP35 - This will requrie too much testing.
OR
Do we implement 1000 - CIN notes.
OR
Implement OSS notes when needed.
OR
Any other solution ?
Suggestions highly appreciated !
Thanks !
CIN, OSS ntoes, Patch level, SAP 4.7, SP24, SP35, INDIA
Hello Ron,
additional information: please refer the note 899086 for details on how to implement CIN. Please be informed that CIN is no longer an add on, it is part of R/3. So you should ignore the comments on 40A in the above note. Also, this note provides information on how to transfer the
CIN settings from 000 client to your customising client. An RFC connection should be established through which you can adjust the two clients.
Regarding your question, I'd do the same as Sunny (for many reasons - bring your system to SP35 level
I hope this information helps.
Best regards,
Tomas Black
Similar Messages
-
Hi guys,
From SAP LOGON, i can see that the version it is using is 7, patch level 5. How can I tell what version and patch level the sap transaction iViews in Portal are using?Hi Zhenmin,
You can try this.
http://hostname:port/sap/monitoring/SystemInfo
http://hostname:port/sap/monitoring/ComponentInfo
In order to login using these urls you got use the username J2EE_ADMIN or the ADMINISTRATOR
Good Luck!
Sandeep Tudumu -
Hi Experts,
How can we know the patch level of the client without login into the database? Is there any log file to find that? Help me.Hi,
You can check by following steps :
1) Right click on the Business One Application Icon > Properties > Find Target.
2) on the target file ; right click and click Properties.
3) on the Properties window there will be a Version tab.
4) under that you can find the Patch Level.
Hope it helps.
Regards,
Jitin -
SAP patch level to change the Gratuity Tax ceiling
Dear friends,
What is the patch level to change the Gratuity Tax Ceiling.HI
There are not many changes reported in Gratuity from long back since year 2008. There is a new note on Superannuation and ESOPs(Note 1396661 - New Perquisite Rules in Budget 2009-Superannuation & ESOP's) but no new note on gratuity. The last note on gratuity i.e. Note 1115073 is valid from 16.01.2008 and from patch level 27.
The latest patch available is SAPKE60056 but you can have gratuity calculation in as low as SAPKE60027.
Regards
Vikas K Sharma -
CIN implementation in SAP 4.6c
Hi All
We plan to roll-out SAP 4.6c for a customer's plant in India. CIN is also required to be implemented. Does any one know whether SAP support CIN in 4.6c version?. If so, what version is used and whether any patches need to be applied? Also can anyone give a rough estimate of how many resources in each module required for a standard CIN implementation for one plant.
Thanks & Regards
S JayaramYou can't delete all clients in one go... you need to logon into each and schedule the deletion via SCC5.
A reorg of this scale will be very time consuming.. I think it will be much quicker to do a Homogeneous system copy via Export/Import.
Also, if this is your development system make sure you check the client independent requests that might have been release from those clients and also the version management of developments.
Thats my 2cents.
Regards
Juan -
Cin cess2+1 HECess configuration for patch level SAPKH50017
HI,
can anyone guide to configure the Higher education cess for SD & MM for patch level SAPKH50017, & what are the note number to implement.
this is very urgent
regards,
naveenHi Naveen,
As advised by Ashish, you need to search the OSS notes for India Budget changes 07 released by SAP. There are many notes wrt to SD and MM which would enable you to configure Higher Ed Cess. You may also be required to make relevant changes in your excise invoice documents in terms of layouts or print programs to accomodate the new field for Higher Ed Cess.
Hope this helps!
Hardeep -
List of notes after upgrading CIn patch level 22 to 27
Hi
We want upgrade system from 470 CIN patch level 22 to 470 CIN patch level 27.
i would like to know what will be the side effects and precautions to be taken for MM prospective wise. i also wanted know after upgradtion what all the notes required to be applied for new secondary and higher education cess. i need side effects of upgradation, precaustions and list of notes after upgradtion.Dear,
You may have a look at the "Side Effects" report which is available in SAP Service Marketplace at http://service.sap.com/swdc-addinfo
-> SAP Support Packages in Detail
-> Side-Effects of SAP Notes
There you can define the source/target queues of support packages .
This report provides an overview of currently known side-effects of SAP Notes contained in a Support Package. The list also includes pointers to other SAP Notes, which are able to resolve undesired side-effects.
i hope that helps.
Lucio Rodrigues
SAP AGS -
What is the latest patch level for SAP CRM 7.0
Hello Experts,
I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is. We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
Thanks,
VSK> I kindly request you to provide any information on what the latest patch for SAP CRM 7.0 is. We currently are on SPS5 and the company is proposing to upgrade to SPS9. Please recommend some sources or help me know what the functionality of the new service patch level is?
http://service.sap.com/patches
--> SAP Application Components
--> SAP CRM
--> SAP CRM 7.0
--> Entry by Component
--> CRM Application Server ABAP
--> SAP CRM ABAP 7.0
--> Support Packages
Scroll down and see the latest patches. If you click on the text you'll see the problems fixed.
Support packages are by definition a collection of patches and fixes for problems, however, there may be small improvements in certain areas.
Markus -
How do I check if I need SAP GUI 7.10 Patch-Level 7?
Hi,
I have installed SAP GUI 7.10 client.
After restarting the PC, I tried to install the Patch-Level 7 but I got the message:
This SAP Front End Patch cannot be applied. Either this patch is already installed or the components to be patched are not yet installed at all.
My version for the SAPGUI installer is 2008.0.0.187
From Windows, I looked at the version for the installed file saplogon.exe, it is 7100.1.0.1027.
Does anyone know if my SAPGUI would require Patch-Level 7?
Thanks.
HYThanks for replying.
This is my SAP logon info, do it looks alright?
Release: 710 Final Release
File Name: saplogon.exe
File Version 7100.1.0.1027
Build: 0
Patch Level: 0
These are my installed component. Could it be that none of the below components need to be patched?
1. SAP GUI Suite
2. R/3 Add-on
3. General Add-on
4. Legacy Components
5. CRM Add-on
Edited by: Han Yang Lee on Jul 9, 2008 4:39 PM -
Latest Patch Level in Sap HCM ECC 6.0
What is the latest patch level that one should apply for Sap HCM ECC 6.0.?
What are the disadvantges of not updating the patch levels?Check the navigation path -
goto service.sap.com -> click on SAP Support Portal (on left panel first link) -> You will get the Support portal home page, here the 3rd tab is Software download(click on software download tab) -> On left side of web page you will get Support Packages and Patches as second link -> after clicking on it, you will get link for A-Z index (click on it)-> Now on the right panel you will get the a to Z index, since you are searching for HR, select H -> in the next page select third link HR Country Legal Change Packages -> Now select the component as per the applicability(EA-HR, HR-CEE, SAP-HR).
You can check the following link -
Re: support pack
Disavantage may be that the new feature which has non source changes may not reflect completely and force you to do some manual changes. -
Problems installing SAP GUI 7.1 patch level 4 for Bex Analyzer
Hi all,
I have a problem installing the SAP GUI for BW - running office 2003, have tried to install without success. The old Bex tools seem to work, but not the new ones and when opening any of the tools report designer or web application designer I get the error : System configured incorrectly. The new functionality in Bex Analyzer do not respond when clicking on the icons.
Thanks,
DirkoHello
please download the compialtion 3 cd of sapgui 710.
http://service.sap.com/installations
Entry by Application Group
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
Installation
Compilation 3 cd is delivered with the sapgui patch level 11!
Also the sapgui patche you can find in
http://service.sap.com/patches
Best Regards
Sven -
R/3 Patch level for SAP BW 3.5
I all could you send me information about the minimum sap r/3 patch level for BW 3.5?
thanks a lot...Hi,
You would find the info on http://service.sap.com/instguides based on the OS and the database.
Bye
Dinesh -
SAP GUI 720 (patch level 6) - Date field problem
Hello all,
in selection screens (like transaction IW38) some users use the F4 help and the enter key to select a date (like field "Period"): they jump with the tab key to the field, delete the current entry and then press F4 and hit the enter key in the popup to get today's date. (Reason: faster than using the mouse, they say...)
This does not work anymore with SAP GUI version 7.20: The enter key is not working in the popup. Does anyone know a fix for this or is it intended to work this way?
Thanks in advance for an answer!
Best regards
DanielThanks for your reply. No, GuiXT is not active.
Interesting is:
I have a PC with an older version of SAP GUI 7.20 (patch level 2). There it works as previously with 7.10 (hitting the enter key in the calendar popup window works).
The reason is (haven't noticed that before), that in 7.20_2 the focus in the calendar popup is in the calendar itself (the lower part). In 7.20_6 the focus is on the top line, where the current date is displayed (like 29.08.2011), and the day is highlighted. The user has to press the tab key to jump from there down to the calendar, and then can press the enter key.
Now the question is: has this been changed from patch level 2 to 6, or is it an SAP GUI option, that can be changed (and that I cannot find)??
Best regards
Daniel -
Bex Patch level for Windows 7 and SAP GUI 710
Hi,
We have the machine with following config:
O.S - Windows 7
SAP GUI - 710
MS Office 2007
When a user logs into Bex Analayzer, clicks on Add-ins he gets an error message in German.
Same kind of problem was encountered with Office 2003, but MS fix 907417 solved the problem.
But i am not able to find any such fix for Office 2007.
Can anyone tell me what should be the patch level of Bex in this case?Hi,
What is the exact error message you are getting?
Thanks
Riyez -
When will SAP GUI for Windows 7.20 patch level 9 be available?
When will SAP GUI for Windows 7.20 patch level 9 be available?
I can't see the SAP GUI patch version in the PAM (https://websmp102.sap-ag.de/pam).
Thanks.Hi,
Latest is SAP GUI for Windows 7.20 patch 8
http://service.sap.com/swdc
> Software Downloads
> Installations and Upgrade
> Browse our Download Catalog
> SAP Frontend Components
> SAP GUI FOR WINDOWS
> SAP GUI FOR WINDOWS 7.20 CORE
> Installation
> gui720_8-10007878.exe SAP GUI for Windows 7.20 patch 8
The NetWeaver 7.x BW/BI Front-End Patch Delivery Schedule can be checked
via note 1085218.
Thanks,
Venkat
Maybe you are looking for
-
How do I delete IPad from an iTunes account
How do I delete iPad from an iTunes account
-
Apple TV worked until today. Message says unsupported signal check your output device. I have checked hdmi cable with another device and it's fine. Put on a different tv and same message. Went out yesterday and bought a new Apple TV and same proble
-
Adding attachments to a task within process
Hi, I am trying to add a PDF document (type : document) from process variables to an attachment list (type : list) of a task; and I see in Workspace the document is attached with the name attach0. The problem is, I can not open it because of its file
-
Hi Gurus, I have 100 semifinished materials for which characteristics to be inspected are same. Can i use dependent specification functionality so that i will prepare inspection plan for one material & instead of preparing plan for each material, i
-
I had to replace my hard drive and I downloaded the desktop software (version 4.1.4) from Palm's site. I cannot get the Notes to sync. There does not appear to be a link in the conduit for notes. Does anyone have any ideas. Thanks ..... Post rela