CIN-India, Excise Invoice, qt updated but not the value (BED,Cess)

Hi All,
I am working on CIN-India-Implementation.
I am creating the Excise Invoice, but value is not capturing, showing Zero (Value not capturing in J1IIN,but quantity is captured).
In Customer Master and Material Master I have taken Tax Classification JCST,JTX3,JTX4,ZVAT-Fully tax.
In Pricing Procedure I have taken JEXP(BED), JECS(Cess), JA1X(HCess), JCST, ZVAT
Excise Group Z1 and Ser Z1 in J1IIN.
Till Billing F2, everything is perfect-Price Tax, Excise but when I create Excise Invoice J1IIN-no value is captured.
Kindly let me know, I have working on this since Yesterday and chked the forum, but not got any positive matter.
Kindly treat this urgent.

Hi
Request you to please once again check the CIN Settings.
Probably go back and check whether you have correctly mapped the excise condtion types in Spro > Logistic General > Tax on goods Movement > India > Basic Settings >Determination of Excise Duty > Condition Base Excise Determination > Classify Condition Types.
Here you have give your pricing procedure and the Condition type with it's use.
Check if you have correctly mapped the condition types.
Thanks
RB

Similar Messages

I bought Mountain LIon but no dmg is downloaded. I can see the invoice from Apple but not the OS I supposed to receive. Is it a bugg?? I have a mac book air. Thanks

xI bought Mountain LIon but no dmg is downloaded. I can see the invoice from Apple but not the OS I supposed to receive. Is it a bugg?? I have a mac book air. Thanks

Thanks for the reply.
However the trick is that it cannot download at all.I m asked to download the application. Then I put my Apple ID, then it start to download but just 1s... Then ....Nothing. No application, no error message... Just a nice invoice....

Got the OS 7.10.8107.79 update but not the firmwar...

Hi..
I have a small question..
I got the OS 7.10.8107.79 update but not the firmware update... my Firmware is stil 1600.2479.7740.11451 How can I get the new firmware????
Thanks in advance

@billstrom
They don't have to be scheduled to appear together!
Happy to have helped forum with a Support Ratio = 42.5

Does anyone know why the waveform peak detect function provides accurately the position of the peaks but not the value?

Does anyone know why the waveform peak detect function provides accurately the position of the peaks but not the value?
I have been looking at my data at the position indicated by the function as a peak, and it is correct at that place the wave has its peak, but the value provided by the function is higher than the actual value at that point.
Attachments:
Test.jpg ‏53 KB

The help makes it clear that the VI will make a quadratic fit to the data, so the locations are not integers (i.e. not aligned with you exact data). From that analysis, the peak is between two of your points, and slightly above the neighboring data.
See the coercion dot. Make the "locations" array DBL (Why did you change it to I64, that makes no sense at all!)
Quote from the help:
"Locations contains the index locations of all peaks or valleys detected in the current block of data. Because the peak detection algorithm uses a quadratic fit to find the peaks, it actually interpolates between the data points. Therefore, the indexes are not integers. In other words, the peaks found are not necessarily actual points in the input data but may be at fractions of an index and at amplitudes not found in the input array."
All clear?
LabVIEW Champion . Do more with less code and in less time .

Unable to find the India- excise invoice generation report in Oracle R12.2.4

Hi,
We are in process of upgrading from 11i to r12.2.4.
When trying to search the India - excise invoice generation report Program , unable to find it.
Plz suggest if the name is changed in r12.2.4 .
Regards,
Sachin Arora

Thanks for your relply.
No I did not tried any column formatting before running spreport.sql.
But yes, after the spreport i tried quering tables "stats$snapshot and stats$database_instance " and also tried to set the column format. But it didnt helped.

CIN Version - Excise Invoice Cancellation.

Dear All,
During billing document cancellation (by VF11) the excise invoice gets automatically cancelled. But my client doesn't want the automatic excise invoice cancellation. They wants to cancel the excise invoice only mannually (by J1IH).
SAP Version is ECC 5.0
Kindly let me know if you have any suggestions.
Thanks & with best regards,
S. Raju
[email protected]

Dear Raju,
Please Check the bellow.
SAP Note Number 551932 - Cancellation of Billing with Excise invoice
Note Language: English Version: 2 Validity: Valid from 05.09.2002
Summary
Symptom
When a billing document is cancelled, the attached excise invoice also gets
reversed. Again the user can go and cancel the excise invoice independently
through CIN making double accounting of the reversal.
More Terms
Excise invoice, Cancellation of excise invoice, j1iH, VF11
Cause and Prerequisites
This is because of the new cancellation procedure of the billing.
This happens because the accounting document for Excise invoice posting is
linked to the document flow of SD. So when you cancel the billing all the
related accounting documents are reversed.
Solution
This is because of the new Billing cancellation procedure. You have to
implement the userexit mentioned in note 339928. This will ensure that the
cancellation of excise invoice works as it used to do before the new
cancellation procedure.
In the userexit userexit_fll_xkomk1 in function rv_accounting_document
create add the code attached below. The userexit is in rv60bfza. This will
not get overwritten in upgrades.
FORM USEREXIT_FILL_XKOMK1.
rule_new_cancel = 'A'.
ENDFORM.
This will ensure that excise invoice related accounting document is not
reversed at the time of billing. You may use the existing functionality to
cancel the excise invoice
Header Data
Release Status: Released for Customer
Released on: 05.09.2002 07:35:33
Priority: Correction with high priority
Category: Consulting
Main Component XX-CSC-IN-SD Sales and Distribution
Additional Components:
SD-BIL Billing
Valid Releases
20.04.2007 Page 2 of 2
SAP Note Number 551932 - Cancellation of Billing with Excise invoice
Software Component Release From
Release
To Release and Later
SAP_APPL 46 46B 46B
SAP_APPL 46C 46C 46C
SAP_APPL 470 470 470
CIN 3.0 30A 30A
CIN 4.0 40A 40A
Support Packages
Support Packages Release Package Name
SAP_APPL 500 SAPKH50015
SAP_APPL 600 SAPKH60008
Related Notes
Number Short Text
339928 New cancellation procedure cannot be deactivated
Attributes
Attribute Value
weitere Komponenten SD-BIL
Regards
MBS

Excise invoice Internal document number not populating.

Expert,
In STO supplying plant Movt-351 document posted , J1IS EXcise invoice has done ,here while saving the Excise invoice Internal document number not populating.
But number ranges (J_1iexcloc ) is done correctly against the year.
Logistics->Tax on Goods Movements->India->Tools->Number Ranges.
This is urgent Tickets ,can anyone help me out ?
regards,
kumar

Dear prasanna ,
Official excise document number in quality server is populating perfectly,where as prod server not populating , in quality server object is J_1IEXCLOC ,same object assigned to prod server . i did not assgined J_1IINTNUM object in Quality server.
why its not populating ?
thanks
kumar

Excise invoice for CR/DR note

Hi all
How to configure excise inovice creation for Billing type L2/G2
Document flow is sale order (CR/DR) --wotout delivery :billing creation wtih reference to sale order (G2/L2)
but with reference to G2/L2
billing type not able to create sale order .

It is nothing but retro billing in which case, you need to create a new pricing procedure and assign the same in OVKK.
So while generating retro billing via VFRB, duty will be considered for the difference in value for which, customer has to pay.
Parallely, instead of creating excise invoice, you need to post the difference ED via J1IH.
thanks
G. Lakshmipathi

Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud,

Hi everyone, I have LR 5 that I purchased with a serial number and about a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, last time from LR4 to LR5 there was just an update without buying the creative cloud, is that possible from LR5 to LR6? Thanks so much.

Welcome to Apple Discussions!
You can't install 9.2.1 or earlier on any Mac that is only Mac OS X bootable. In fact you need to use the restore disks which came with those Macs to install 9.2.2 on those Macs. 8.6 is only possible to install on Macs which came with 8.6 or earlier. The 9.1 disk may be useful for your 1999 PowerMac G4, but won't be of any use for a 2006 Powerbook G4.
Adobe Pagemill does not follow w3.org web publishing standards. If you want a webpage editor, get http://www.barebones.com/ BBEdit
MS Office, there is a free Mac OS X alternative in http://www.neooffice.org/
Or you can upgrade to the full Office 2004 for the Mac, or get http://www.thinkfree.com/ or Open OS X Office.
Wordperfect files can be converted to Word files with http://www.dataviz.com/ 's Maclinkplus.
Microsoft no longer has Internet Explorer for download (that quit being offered January 2006), though that is covered more in my FAQ:
http://www.macmaps.com/browser.html
As for other Mac OS X inquiries, I strongly recommend seeing my other FAQ:
http://www.macmaps.com/macosxnative.html
which should answer most of your other questions. If you have further questions, please feel free to ask me.
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

I have programmed iCal and Address book to sync via MobileMe. The info I type in iCal and Address Book on the MacBook Pro gets updated on the iPad, but not the other way around. Any hints?

I have programmed iCal and Address book to sync via MobileMe. The info I type in iCal on the MacBook Pro get updated on the iPad, but not the other way around. Any hints?

Levi G B ... Also found another thread by Davidfromsurfside on 10/14/11 0703A with the same problem. I responded on his thread "I have the same problem. IOS5 on iPad1, iPad2 and iPhone4S all with iCloud on. Lion 10.7.2 installed on my MacBookPro and iCloud set up/on. Any new iCal entry on either iPad or on the iPhone ends up via iCloud on both iPads and iPhone. BUT NOT ON THE MacBookPro. And iCal entry on the MacBookPro does NOT GET SENT to iCloud.com or to either iPad or the iPhone. This is a huge problem for me because I do all my office scheduling on the iPad or iPhone but rely on the MakeBookPro to print out daily client lists. I REALLY need to get this fixed...it is causing major business issues. " No one so far has had a fix.... :(

HT4623 I have an iPhone 4. I recently updated it. It loading all my iTunes music purchases but not the music I had on my computer and had on my phone. Gone. I have tried re-sycing. Tried all I know to do. It says "it cannot locate my music" do I want to s

I have an iPhone 4. I recently updated. It loaded all my iTunes music purchases but not the music I had on my computer. This music was on my iPhone before I updated. I have tried re-sycing but not getting anywhere. Says it cannot locate my music files but I see it on my lap top but cannot play it or get it on my iPhone. Can anyone walk me through this?

C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again.

IPhoto will not initiate. Downloaded update, but not change. Any help out there?

iPhoto will not initiate. Downloaded update, but not change. Any help out there?

If you want help you’ll need to give us more information. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

India - Excise Invoice Generation Request--Filter LOV values OU wise

Hi,
Does anyone have any experience, on how to filter the delivery ids that appear in 'India - Excise Invoice Generation Program' OU wise. This is a seeded India Localization request.
After shipment, user fires this request for generating excise invoice number for a particular delivery id.
However, the same program/request can be fired from some other OU, without any parameters.
This is causing, excise invoice numbers getting generated automatically for all OUs, for all items that are in interfaced state.
If anyone, has any experinece in this..please let me know.
Sayantan

Everytime i try to update my iphone 3gs it downloads but then cancels halfway but not the full file

Everytime i try to update my iphone 3gs it downloads but then cancels halfway but not the full file. When i download 6.1.3 from various sites i receive an error (3194). I've been trying to troubleshoot it now for weeks. Also i can't copy songs music photo's or anything on it as well. Help would be highly appreciated please and thank you.

http://support.apple.com/kb/TS4451
This article should be able to explain what is going on and how to resolve it.
Good luck!

I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, when I want to know how much memory can not store in the same way in either computer.

I have an iMac OS X Version 10.5.8 but I also have a MacBookPro 10.7.5 version, why software updates are not the same? For example, the way to see how much memory I have in my iMac is diferent than MacBookPro. And where I can see the memory of the disc I've got in my iMac? Than you very much.

If you want everything the same on both computers you need to be running the same OS X version. You can't because your iMac is a PPC machine, not Intel.
But to see information about your hard drive is the same for both. Simply select the drive icon on the Desktop. Press COMMAND-I to open the Get Info window. Disk information is in the upper panel.

CIN-India, Excise Invoice, qt updated but not the value (BED,Cess)

Similar Messages

Maybe you are looking for