CIN - Non-Leading Ledger setup with reporting

Greetings fellow experts,
I have a question from our colleagues in India. When CIN is utilized and a non-leading ledger is setup, can they still run CIN specific reports from the non-leading ledger or does some special configuration or reporting need to be set up? Please let me know.
Thanks,
Jim Steinle

Hii
Leading Ledgers;
Leading ledgers are the main legders that are to be updated regularly and it is mandatory form legal reporting point of view for ex: as per the companies act or any contries reporting purposes.
Non Leding Ledgers are the secondary ledgers which are not compulsary for the companies to maintain. Companies Manintain non leading ledgers for there reproting purposes or for any other requriements they have,,,
as said it can be termed similar as special purpose ledgers,,,
IN SAP there are 6 main senerios are there for the leading ledgers and for the non leading ledgers u can use any one or non of them and u can create ur own senerio,,,,
Thanks
sejal
Hope its useful to u
Assign points if useful

Similar Messages

GRR1-Report painter balance sheet for non leading ledger

Hi Experts,
I want to create a balance sheet for non leading ledger group using GRR1 report painter functionality. i have created also however in general selection i have selected non leading ledger under ledger characteristics. and when i am trying to execute report no data is coming in report. however when i assigned leading ledger report is coming correctly. so my question is how to assign a non leading ledger group in report created using GRR1 ?.
Thanks in advance for your comments!!

Dear Mustafa,
Please go to transaction code se16n, enter table FAGLFLEXT. Give the parameters which you have given in the report painter and try to execute, see whether you get any result. If you find any result, please let us know your general data characteristics and what filter you have put at the column level.
Best Regards,
Raj

Activation of new Non leading ledger for IFRS- Challanges involved

HI
Good Day. I am requesting this qwery on behalf of my company. We are working on SAP ECC 6.0 and the New G/L functionality is activated and additional non leding ledger have been defined for IFRS reporting for some of the company codes rolled out subesequently.
Duriing the implementation , IFRS ledger was not defined for some of the company codes at that point of time. Is it feasible to define the Non leading ledger for IFRS reports now.
If it is possible, how to migrate the opening balance to this ledger. What are the other challanges involved, if we activate the non leading ledger now.
Thanks in advance for your guidance.
Regards.
S K Patra

You want to assign an additional ledger to a company code later on in General Ledger Accounting (new). You have to utlize the functions that are provided by the SAP General Ledger Migration Service.
This falls under Scenario 7: Subsequent implementation of an additional ledger
You need to consider this as a separate project and must prepare and execute this project with the utmost care to ensure accounting is still in order following the activation.
You have to structure accounts and already posted line items of the subsequently implemented ledger, in addition to
consistently changing various interdependent Customizing settings (for example, for General Ledger Accounting and Asset Accounting). SAP provides only a technical migration
Please refer to note 1227504.

Depreciation in Non Leading Ledger at Historical Exchange Rate

Hi All,
Our Company code is using parallel currencies 1LC is CAD, 2nd LC is USD & 3rd LC is GBP. (In T.Code: OB22)
When we look at the values for local currency 3 (GBP) in ledger 0L, all the entries have been translated from CAD to GBP at the same rate each month, which should be the proper treatment. In fact the translation to GBP is occurring at the historical rate for the fixed assets, which is correct.
However when we look at the values for local currency 3 in the parallel ledger (N1) we can see that the same CAD values have different LC3 values each month. The rate being used to translate the depreciation expense changes each month and looks like it is the current rate in place at the time depreciation was run.
We want the depreciation amounts for LC3 that are posted each month to be translated using the historical rate in both the leading (0L) andparallel (N1) ledgers. Our issue is how do we make the change. (Depreciation Run to update Non Leading Ledger N1 with historical exchnge rates as in Leading Ledger 0L.
Unable to understand the system behaviour. The depreciation posting run in the NON Leading ledger should happen with Historical Exchange Rate.
Thanks in Advance
Regards
K I M.

Hi
To understand why the system behaves in that way, the most important
thing is to understand how area 01 is posting its values:
As you will know, area 01 is the only area that is posting its values
"online" (this means that APC values will be updated in the G/L directly
when posting to an asset). It is a technical matter that this "Online"-
posting will always be done to ALL(!) ledgers that are defined in the
company code. So whatever Ledger group you assign to depreciation area
01, this will not be considered by any APC value posting, APC
transactions (as well as write-ups) will always be posted in ANY ledger
group in G/L with the values from area 01.
If you then want to setup a scenario in Fixed Asset Accounting, where
you post different valuations (local GAAP / IFRS) to a different ledger
group in G/L for parallel valuation, then you have to use (in total) 3
depreciation areas in the following way. For each additional "valuation"
for which you have additional ledgers defined in G/L, and for which you
want to get different values as those posted in area 01, you need also
two additional depreciation areas (1 real and 1 derived area) in
asset accounting.
So a typical dep.area setting for a parallel ledger is like:
           Real      Posting to G/L         Ledger
Area 01     X            1                   0L
Area XX     X            3                   XX (your ledger code)
Area YY                  6                   XX (your ledger code)
Acquisition/transf/retirement postings in area 01 go to all ledgers
independently of your setting in OADB. And, if any difference occurs
between area 01 an area XX this is posted trough the derived area YY
(posting indicator 6).
blaz

Preventing posting in leading ledger by closing period in non leading ledge

Is it possible?
I have 24 periods in non leading ledger and want to prevent posting in the leading ledger if the posting period is closed in non leading ledger. Currently when I try to post thru FB50L, for closed period, if I mention the non leading ledger, the document is not posted. But when no ledger group is mentioned. the document is posted in both ledgers.
Thanks for your thoughts on this.
Regards,
SSK

You have to define a separate Fiscal year variant to non leading ledger using with the following path
Financial Accounting (New) > Financial Accounting Global Settings (New) > Ledgers > Ledger > Define and Activate Non-Leading Ledgers
Rgds
Murali. N

Query regarding implementing non leading ledger

Hi friends,
I am suppose to implement the non leading ledger along with the leading ledger. Its fiscal year is from Jan - Dec. I have a query that is there any issues at the year change ( like any kind of adjustment at year end) and what are the things needed to be carried out at the beginning of the year.

Dear Mr.Anand,
Could you please clear the below points.
1. Are you using NewGL ?
2. Want to add the Non-Leading ledger ?
3. "I am suppose to implement the non leading ledger along with the leading ledger" means want to implement both ledgers
like Leading ledger and non leading ledger
4. You want to classic ledger to New ledger ?
If you are using classic ledger then you need to go for newgl migration.
IF you allready using the NewGL and want to add non leading leadger then useing the New GL migration scenarios 6, 7,8.
Please refer the below link.
http://wiki.sdn.sap.com/wiki/x/JghNCw
please revert back to me with more details.
Reg
Madhu

New Gl- report with some details of CO for the non leading ledger

Hi,
I am using New GL. I have 2 ledgers (local ledger and USGAAP); The local ledger is the leading ledger, so is the one which impacts to CO. I need some information in CO (mainly cost center) for the non-leading ledger (USGAAP). I am thinking in create a report painter with the table of non-leading ledger, but I cannot find a table in NGL which save the CO object and can choose the ledger. I am looking too, this information by a standard report, but I cannot find one.
Any idea about a solution of this situation?
Thanks,
Cecilia

Hi Cecilia, did you assign Cost Center scenario (FIN_CCA) to your ledgers?, otherwise NGL Tables (FAGLFLEXT and FAGLFLEXA) won't have Cost Center field populated. If this is the case, maybe your only option is use BKPF then BSEG + BSEG_ADD (Entry View of Accounting Document for Additional Ledgers) and pull Cost Center from there.
I hope this helps.

Display of Non Leading Ledger Postings alone in FAGLB03 Report

Hello Friends
We have the concept of Leading Ledger (0L) and Non Leading Ledger (1L). As you know that when we do the posting for Leading Ledger it also posts in Non Leading ledger and of course we can post exclusively for non leading ledger alone. Everything is fine. Here the question is:
If I would like to see Non Leading Ledger Postings alone (excluding Leading Ledger postings that have flown), is there any report or anyway I can achieve this.
Thanks in advance
Regards
Brahmam

Hi Sivakumar
You are 100% right. I can see in FAGLB03 Report all the postings to Non Leading Ledger (including Leading Ledger Postings). I dont want this.
I would like to see only Non Leading Ledger Postings excluding the ones flown from Leading Ledger in any report (need not be FAGLB03).
Ex:
Doc No. 00001 posted in Leading Ledger - Obviously flows to Non Leading Ledger
Doc No. 00002 posted in only non leading ledger - available in Non Leading Ledger
If I execute FAGLB03 with Non Leading Ledger as paramer both the documents will come. But what I want is any report which shows only 00002 document alone.
Hope this is clear
Thanks
Brahma

Report Painter for Non Leading Ledger (Error GH113)

Hi,
Kindly note that we are in the process of enhancing a report for Monthly Balance Sheet as per our client's requirement. The report is based on report painter and we want to add Ledger as an input selection so that the report can be run for Leading Ledger(0L) and for Non Leading ledger(CL)as well .Initially there was no ledger selection and the report ran only for Leading ledger (0L). However when we try to run it for non leading ledger CL it throws an error message GH113 (more than one ledger not allowed in drill down report.)
Our ABAP Consultants have investigated this issue and suggested that for field (RLDNR) ledger the program is picking up "CL" as per input selection , However 0L is also getting captured thereby resulting in conflict and consequently throwing error GH113.
Concern
1) Does this report has a constraint that it can be run only for leading ledger and not for non leading ledger?
2) Apart from report painter form are there any other default setting which extracts "0L" and puts in the report.
Also note that the report painter form settings have been checked thoroughly and ledger has been defined as local variable for input selection.
Thanks

Hi,
Thanks for your quick response. I have already added the ledger as part of report selection and declared it as a local variable so that input selection is possible. but When I select the non leading ledger "CL" and try to execute report it throws error message GH113.
have checked all the settings in report painter form and not too sure as to from where the report is picking up Leading ledger "0L" although as a part of input selection i have selected non leading ledger "CL"
Appreciate your response.
Thanks

Document splitting with non leading ledger activation

Hi experts,
Thanks for your advance help. we have activated document splitting in my company code pofit center is deriving proprly. for below entry.
1 31       503402     Vinayaka International Ltd.     4100     3,000.00-     0.00
2 40       53080043     ELECT.CHRGS-NON PLT     4100     2,000.00     0.00 4206
3 40       53080043     ELECT.CHRGS-NON PLT     4100     1,000.00     0.00 4207
system is deriving profit center like below.
000001 31 16011002     SUNDRY CREDITORS     2,000.00-     INR   4207
000002 40   53080019     BAD DEBTS WRITTEN OF     1,000.00     INR   4207
000003 40   53080043     ELECT.CHRGS-NON PLT     1,000.00     INR   4206
000004 50   19910001     INTER BRCH/DIVN A/C     1,000.00-     INR   4206
000005 40   19910001     INTER BRCH/DIVN A/C     1,000.00     INR   4207
in the same way i have activated document splitting in another company code with non leading ledger activation. and posting same transation
1 31       503402     Vinayaka International Ltd.     4100     3,000.00-     0.00
2 40       53080043     ELECT.CHRGS-NON PLT     4100     2,000.00     0.00 4206
3 40       53080043     ELECT.CHRGS-NON PLT     4100     1,000.00     0.00 4207
system is not deriving pofit center and it is giving the below error.
Balancing field "Profit Center" in line item 001 not filled
please advise any configration i have missed out.
any quaries please please let me know.
Regards

Hi Venkat,
Even in the first transaction, the profit center has not been determined by document splitting
if the profit center was derived by document splitting we would have seen 2 items for sundry creditors in the GL view
So check your document splitting settings for the corresponding document type, and transaction variant
the account category which includes vendor's recon accounts should be included in "item categories to be edited" list
Regards
Sach!n

Automatic AP/ AR posting with different amount in Non-Leading Ledger

Dear All,
We have leading ledger for local GAAP and Non leading for IFRS. Is there any configuration/ mechanism to post a AP/ AR document with relevant amount in the Non-Leading Ledger based on the a/cing standards described by relevant standard.
I am aware of autoamtion in posting the documents of depreciation, foreign currency valuation, accrual/ deferrals. I want to know settings for automating the entry in non-leading ledger based on the standard.
Thanks,
Amish.

Hi,
If you want to post additional amounts ,adjustments, modifcations to non leading ledgers you can use FB01L and give your non leading ledger while posting. System post documents only in Non leading ledger.

Depriciation Posting with Non-Leading Ledger

Dear SAP Asset Experts,
I am struggling a lot for Depreciation Posting with Non-Leading Ledgers.
I have configured Non-Leading Ledgers and Assign with Dep areas,
1 - Define How Depreciation Areas Post to General Ledger
Asset Accounting  Integration with the General Ledger
Dep Area - 16, G/L -02 & Non Leading Ledger u2013 ZI
While executing periodical run depreciation, system gives error message (Gross Block GL account canu2019t directly posting).
Please guide me,
Regarding,
TML

Hi Swati,
You have not mentioned the depreciation areas you have creatd for Non-leading ledgers (you need to create one real dep area and another one as Derived depreciation area as real area).
To my understanding for the error you are getting during depreciation run is due to wrong "Posting to GL" Indicator. You may need to use 3 for real depreciation area and 6 for the derived depreciation area crated for non-leading ledger.
Please see the SAP Help to get more inputs on that before making any changes.
Regards,
Kiran Yelamarthy

Tax depreciation area and non-leading ledger

I want to know how to post assets retirement and transfer transaction into non-leading ledger.
I setup one depreciation area 50 for local tax depreciation and accordingly one non-leading ledger ZZ for local satuary report.
Depreciation area posting indictor
01: Book depreciation             1
50: Tax depreciation               3 (only post depreciation)
90: Variance (50 minue 01)      6
system was able to peform below:
1) for acquisition transaction, same APC value was updated into both ledger
2) for depreciation, different depreciation amount can post into each ledger
But I don't understand below results:
1) For retirnment transaction, there is only one FI document posted into leading ledger with APC and accumulated depreciation. But I could not find any related document in non-leading ledger.
2) Same as assetes transfer transaction
3) But in assets explorer, the APC, accumulated depreciation was cleared correctly, also there is difference of accumulated depreciation in area 90(derived area)
I think it was different with my expectation: I thought SAP can post FI document to each ledger with APC and different accumulated depreciation.
My question was how to get the APC and accumulated account balance in non-leading ledger with local tax depreciation based.
Thanks in advance!

Thanks first.
ASKB was "Periodic Assets posting" but in our IMG the G/L posting indictor of prallel depreciation area was 3 (only post depreciation) and 6(only APC directly).
The setting was configured through the SAP wizard "Setup Areas for Paralle valuation".
Can you give further advice?

Fiscal Year for Non-Leading Ledger Issue

Hello Experts,
I am implementing New GL concept in my Current Implementation..
We have one company code which is based at US and has a branch in india
In this case, i have configured one non-leading ledger with Fiscal year variant V3 and Currency INR.. for Indian local Reporting...
Here after posting the transaction, In F.01 report, i am not able to view the Fiscal period for that non leading ledger which i have crated for India
Kindly help me.. I want to view the F.01 report with US posting period when i executed with Leading ledger OL and V3 fiscal period when i execute this with Non- Leading Ledger KS
Kindly Help me regarding this. And also help me to provide some transaction codes for executing reports exclusively for Non- Leading Ledgers..
Thanks
TK Surya

Hi Aravind,
Thanks for the immediat response. But I am not able to understand the activation of non leading ledger and activating it with two currencies and fiscal year variant. Can we have two reporting structure with two periods with two different starting and ending dates.
Thanks once again
surya

Cost center not updated when posting in non leading ledger

Hello FI Experts
I have two ledgers - Leading and Non Leading Ledger.
When I posted expense entry it updated both the ledgers and updated cost center value. This updated value i checked in cost center report KSB1.
For Ex: Rs. 1,00,000
Now I posted another expense entry in non leading ledger only. For Ex: Rs.50,000
How ever this entry didn't updated cost center report value. I checked in report KSB1
So I want to know:
1. Are there any cost center reports / profit center reports in controlling module where I can get non leading ledger specific amount in cost centers and profit centers
2. Is it possible to run assesment and distribution cycle, cost reposting and other CO transactions for non leading ledger amount
Deepak

Hi Deepak.
You can verify is the cost center was posted on document running tcode SE16N on the FALGFLEXA table, put the document number to do research.
After you can trying to post the new document through Tcode FB50L choosing or not a legder specific, then verify the document was posted correctly running the Tcodes SKb1 or Se16N with FAGLFLEXA table again.
Also you can check this link Checking the Allocation of General Ledgers to Cost Centres
Kind Regards
Jandoval Nascimento

CIN - Non-Leading Ledger setup with reporting

Similar Messages

Maybe you are looking for