Cin Number range issue.(capturing Excise Invoice)

Hi guys
I created sales cycle and after i am creating excise invoice thru tcode-j1iin
When i enter excise group and series group and after saving it.. it is showing error message that internal number range for J_1IINTNUM
I have maintained number range for this in tcode-j1i9..
and i assigned this number range to billing typejexexcise invoice.
even though error come.
Help in this issue
Here the error message:
Error in allocating internal document number Interval not found Number object J_1IINTNUM

Hi!
Kindly check the number range maintained is as Follows ??
No. Year From Number To Number
01 2008 0001000000 0001099999
CIN only takes No 01, it does not recognises any other no.
Moreover the number range should never be maintained as External Numberr range.
Check the same and let us have the feedback.
Regards,
Dnyandeo H. Ainarkar

Similar Messages

CIN Number range for MM excise documents for new financial yer 09-10

Dear All,
Please let me know standard object of CIN number range which i need to maintain in new FInancial yr 09-10.
Thanks

dear sir.
Please maintain the number ranges for the following objects The no nr has to be '01' for all
1. j_1iintnum
At an Excise group
1. j_1irg23a1
2. j_1irg23a2
3. j_1iRG1
4. j_1irg23c1
5. j_1irg23c2
6. j_1ipla2
7. j_1iintpr2
8. j_1irg23d
9. j_1irg1_t ( material level)
10. j_1iconpla ( if Consolidated PLA is used )
At Series group
1. j_1iexcloc
2. j_1iexcexp
3. j_1idepinv
4. j_1i57Fc ( 57F Challans )
regards
jrp

Number range in cancelling excise invoice

Hai Gurus
wats the number range object for cancelling excise invoice???
regrds
Vibhu

Dear Vibhu,
There is no number range object for cancellation of excise invoice.
for excise invoice number range object is for local:J_1IEXCLOC
when cancelllation for excise invoice system geneate internal number range number.
for internal number range object is :J_1IINTNUM
for your better understanding find the folloing number range objects
J1I9 Maintenance for Number Range Object
J_1A_AAWBL Internal Way Bill Number for Asset Movements
J_1ANUMBER Number range for additional Argentine document number
J_1AOFFDOC Numbering Object for Official Documents
J_1APRNTCH Number ranges for printing characters
J_1BNFDOCN Nota Fiscal document number
J_1BNFNUMB Nota fiscal number
J_1I57FC 57FC Number Range Object
J_1IARE1 ARE1 Doc No object based on Series Group
J_1IARE3 ARE3 Doc No object based on Series Group
J_1IBOND Excise Bonding: Bond number object
J_1ICERT Withholding Tax Certificates (India)
J_1ICHLNNO Internal number range for challans
J_1ICONPLA Consolidated PLA serial no. generation
J_1IDEPINV Excise Invoice Number for Depot Invoices
J_1IEXCEXP Export excise invoice number range
J_1IEXCINV Excise invoice number **
J_1IEXCLOC Local excise invoice number range *******
J_1IEXCTST Excise invoice with intervals
J_1IEXINEX Excise invoice number for export
J_1IINTNUM Internally document number to be generated
J_1IINTPR2 Dispatch serial number
J_1ILIC Excise Bonding: License number object
J_1IPLA2 PLA part II number range object
J_1IRG1 RG1 Number range object
J_1IRG1_T No. Range for RG1 - Excise group / Material
J_1IRG23A1 RG23A part 1 no. range object
J_1IRG23A2 RG23A part II number range object
J_1IRG23C1 RG23C part I number range object
J_1IRG23C2 RG23C part II number range object
Regards,
NAr

J1IEX capture excise invoice error.

what i had done was;
1st - create an import PO and my pricing procedure used was SAP CIN standard JIMPOR.
2nd - PO created under 12345, i proceed to MIRO to post the invoice under 11111. *note that GR was not being done at this point.
3rd - next i proceed to J1IEX to capture excise invoice, i entered the PO number and a small popup screen appeared asking for commercial inv no, i key in the invoice no 11111 and year 2011.
and i encountered the error message Document 12345 does not contain any selectable items.
why is that so?
what i understand that JIMPOR is CIN pricing procedure and it contain JCD1 condition type which is a valid condition type for it to be captured in J1IEX. pls help!.
thank you.
Note : Please search forum before posting,there are lot of resources(search forums,sap help documentation,articles,wiki etc.,) available.If you have any specific queries please post it here.
Follow forum rules before posting.
Edited by: Jeyakanthan A on Jul 21, 2011 12:00 PM

hii,
still i feel that this issue is related to number ranges. have u checked to give there ur Invoice Number.
u can try sm more thing ...........
like:-
For Import Purchase Order first you should settle the delivery costs in MIRO.
also check sm threads which can give some ideas:
Excise capture during MIGO for domestic purchase
Not able to capture excise invoice for import PO
imports
hope it will be helpful.
thanks
nisha

Capture Excise Invoice w.r.t Stock Transfer Order

Hi all,
Can anyone explain me how to Capture Excise Invoice W.r.t Stock Transfer Orders.
right Now i'm follwing below Steps
1. Create STO in Issuing (sending ) plant with duty and CVD conditions.
2. Issue Material to Receiving PLant using 351 Movement.
3. Book the CVD Condition thru MIRO Transaction
4. Capturing Excise Invoice w.r.t Stock Transfer Order.
5. Receive the material in Plant( 101 Mvmt).
I had Few Query at step 3 and 4.
Q1. While capturing Excise Invoice w.rt STO system is not taking CVD number as reference in Commercial Invoice Field.
Q2. It gave me the Msg Like Excise Invoice XXX does not Exist in PLant B2B ( B2B is my sending Plant).
does that mean i have to first create the excise invoice in sending plant?
if yes, how can i create pls provide step for this.
this excise invoice need to be created in reference to STO or In refernce to 351 mvmt document.
Regards,
Sheo Anand Singh

Hi Anand,
Commercial Invoice number is the invoice number u have created in your Step-3, not the CVD number.
Hope this clarifies.
Thanks,
Viswanath

Capture Excise Invoice w.r .t Without Purchase order

HI
When i try to post J1IEX i.e Capture Excise Invoice w.r .t Without Purchase order i am getting the following error message :
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount '            1.000-' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application
Please help me to solve this issue
Thanks & Regards,
Mani

Hi,
check in cin-basic settings- co code settings , there will be a check box "Rounding duty on procurement" , pls tick mark this and check it..
otherwise check in debit / credit selection for EWPO trans type . as per blw in - Logistics General  Tax on Goods Movements  India  Account Determination  Specify Excise Accounts per Excise Transaction
EWPO           Credit     CENVAT clearing account
EWPO           Debit     RG 23 AED account
EWPO           Debit     RG 23 BED account
EWPO           Debit     RG 23 ECS Account
EWPO           Debit     RG 23 NCCD account
EWPO           Debit     RG 23 SED account and ECS and SE CESS
Edited by: Jayakumar Raju A.S on Aug 19, 2009 6:36 PM

Capturing Excise Invoice (EI) at depot

Hi gurus
I am facing an issue while capturing Excise Invoice (EI) at depot.
If non-batch material and batch material are combined into one material document which is generated after post goods issue (PGI) to create EI, two separate Excise Invoices are getting generated automatically.
But while capturing Excise Invoice for both materials at depot, I am NOT able to capture in T-code J1IG by Goods receipt material documents.
How to handle such case? Could you give us some suggestion?
With Regards
baalakrushnan.da

Hi Ashok,
After MB1C, when we are trying to execute J1IG with the material document number and then click "Details" button, the new screen asks for internal document number. We click on "More Documents" and manually enter the excise values along with excise invoice details and save.
This reflects the values in the RG23D and displays in J1IDEPOTSTOCK1 report also.
But when we try to sell from the Depot and create J1IJ, the uploaded invoice is not getting displayed when we are trying to select it to pass excise value.
How can this invoice be selected in J1IJ, if we follow this route.
Is this the correct process or I am making some mistake in the J1IG step.
Regards,
Debarshi

Settings for capture excise invoice in MIGO and other settings

Hi,
For excise invoice capture and post procedure which we are following is as follow
1 : For Local Excise invoice
     After receving goods from Vendor first we are Doing J1IEX Part 1, Capture excise invoice after saving this we are getting part 1 number, then we are making GR with MB01 ref. to part 1 number , then qyuality inspection then updating material in Unrestricted stock from quality afetr that we are doing J1IEX poat PART 2 here we are getting part 2 number then invoice verification,
2 : For import PO
      First MIRO for custom delivery cost we are getting MIRO number, then J1IEX part 1 ref. to MIRO number and year then MB01, ref. to part 1 of J1IEX then quality quality to store then J1IEX Part 2 then MIRO for vendor.
now in many thread i read about capture invoice in MIGO   so i want to know the detail settings which required to be made so that we can perform our ruoutin in short time.
regards,
zafar

hi
>is there will be any effect in our existing procedure We want to follow both for some time , after that we will do only in MIGO,
yes u can use both simultniously
but in MIGO if u capture, the step of updation J1i5 will be ommited (it will take palce automatically)
like currently ur doing capture >update >post
in migo only capture and then post
>second think is that now while posting the capture excise invoice in J1IEX we rae entering part 1 number, so can we do woth >this while capturing it thorugh migo or we have to post with vendor excise invoice number only.
You can do capture and post simultaniously in migo only
the separate transaction is given as persons or users may be diffrent for GR and excise
if the same user want to do the GR and cap and posting then yes he can
for capture and posting u also have to tick Post Excise Invoice Captured in MIGO in excise grp settings
regards
kunal

Capture excise invoice for GR without PO

Hi,
I am trying to capture the Excise Invoice for a material without PO.
All J1ID entries are maintained for Material, Chapter ID, Vendor, plant etc.
The procedure followed is below:
1. Received the material with Mvt Type 503 Q through MIGO > Goods Recipts > Other. Excise Invoice tab is maintained as 'No Excise' while doing receipt.
2. Posted Part-1 using T-Code : J1I5.
When I am trying to Capture Vendor Excise using T-Code J1IEX > Capture Excise Invoice > Good Receipt (R05) and enter the Material Document Number (created by step 1), system is giving an error
"Document xxxxx xxxxx does not contain any selectable items"
Did I follow the correct procedure ? Is there any other method for capturing this entries ? Am I missing any configs or master data maintenance ?
Please give your valuable suggestions
regards
Arun.

Dear Arun R,
You Kindly go to the following path and maintain your movement type over their and do the MIGO.I am very sure at the time ot migo excise tab will come for part-1 updation and subsequently you capture part-2 on J1IEX.
SPRO->LG->Tax on Goods Movemet->India->Business Transactions->Incoming Excise Invoice->Specify which movement type involve excise Invoices.
Hope this will help you out.
Regards
AKS

Capture Excise invoice in MIGO

Hi
i want to know where in the MIGO tab, i can put the option capture excise invoice, capture and post excise invoivce and no excise etc. pls tell me
regards
B Shar

if ur material is maintained in J1ID, then while doing migo an excise invoice tab will appear at header.
there u have to enter the excise invoice number and excise invoice date.
then check and save the migo.
now use J1IEX.here in the first tab u will found the options like display,cancel,capture,post option.
in the next tab u will choose vendor excise and in the next tab u have to enter the excise invoice number u have previously entered in migo.
rgards,
indranil

J1IEX capture excise invoice error. part 2

was created to continue from this [thread|J1IEX capture excise invoice error.; which was locked for no apparent reason.
Mr Jeyakanthan A, don't you lock my thread and telling me to search the forum for answer.
i have done my search on this [ topic on J1IEX no selectable item|http://www.sdn.sap.com/irj/scn/advancedsearch?query=j1iexdoesnotcontainany+selectable], it had yielded a few threads but none of it offer a resolution.
go thru the threads yourself if you want.
once again don't you lock my this thread.

Hi,
The message 'document/PO doesnt contain any selectable items' would come when there are any open PO's for the same vendor for the same material. Check whether there are any open PO's in ME2L or ME2N. Close the unwanted PO's by ticking the Delivery completed in the Delivery tab and save. Try J1IEX after this.
The option of Internal excise invoice number will come in the excise item tab under part 1 tab if the excise values are Captured/Capture & posted while processing MIGO. If the excise values are not captured, please try reversing the MIGO and process a fresh MIGO and check excise values are being captured or not.
Regards
Hari
Hi Hari,
i have created a new vendor and maintained all the entries in J1ID for it. yet i still encountered this message.(in response for any open PO for same vendor for same material cases.)
next, i have also entered the necessary data in the PO's Import tab(on both header and item level), but when i tried doing MIGO-GR, there's no excise tab as well. i guess this might also be part of the reason why i am hitting that message when doing J1IEX.
strange..i had tried all means but still cant get it work.

Error when capturing excise invoice

Dear guys,
I am unable to capture excise invoice in J1IEX. After entering all the values and when i click on the check button, am getting "Run time error- description". Short Text " Division by 0 (Type p) in progran SAPJ1IEX.
Runtime errors : BCD_ZERODIVIDE
Exception : CX_SY_ZERODIVIDE.
Kindly help me to resolve this issue..Thank you..

Hi,
Check in J1IEX, under "Duty Values" tab,
Whether your Excise Duties (BED, ECS & SECess) are greater than the Excise Base Value.

BAPI for Capture excise invoice

Dear Friends
I wish to is there any BAPI available for capture excise invoice (tcode:- J1iex).
please tell. I will apreciate your help.
Regadrs
Naeem

hi
pravin
both the bapis are part of the Jiex tcode's program and their works fine.. may be you are not giving the all the values required over there.. in my case i have to work with the BDC... as i am also failed to implement it.
Regads
Naeem]

Problem in capturing excise invoice

Dear Experts,
I am facing problem at the time of capturing excise invoice in J1IEX.
A message always displays is "Excise Details are not maintanied for Vendor 9000232"
Message no. 8I565
When i am entering excise invoice with reference to PO, without PO or even the Goods Receipt.
Can anybody tell me how to overcome this error.
Thanks & Regards
Prasant Sekhar

hi,
In J1id maintain vendors excise details
Regards
Kedar

Capturing excise invoice after MIGO

Hi All,
How can we capture and post excise invoice when GR already done for the PO., (material missed in J1ID and no condition records maintained while raising the PO), I have done the following, but I am unable to post part2:
1) Maintained the material in J1ID
2) Maintained the excise condition records
3) Captured the Excise invoice(J1IEX) with reference to GR document
4) Tried to post the Excise invoice thru J1IEX, but getting message"No Part I exists for availing credit in excise invoice"
Your prompt response is highly appreciated
Regards,
Sattuj

Hi
You have captured excise invoice w.r.t GR document. But at time of MIGO, you should select "part 1 entry only" in excise tab and thus create a GR document. At this time, part 1 entry would be made. Then you can capture and post excise invoice with ref to GR document.
Please note that without part 1 entry, part2 (posting of excise invoice) is not allowed legally and SAPically.

Cin Number range issue.(capturing Excise Invoice)

Similar Messages

Maybe you are looking for