CIN query

Hello,
IN the CIN what do we configure in these steps mentioned below:
Classify condition types
Assign Users to Material Master Screen Sequence for Excise Duty
Also what do you mean by utilization in CIN?
Regards,
Jhon

Dear s.jhon,
Before post please search in the forum or wiki you can find immense information. However please find this.
Classify condition types
You need to configure the respective condition types according to your business requirement for instance JEXP, JCEP,JCET
so on and so forth.
Assign Users to Material Master Screen Sequence for Excise Duty
You have to assign the respective user ids in order to access the material masters CIN data.
Also what do you mean by utilization in CIN?
It is offsetting on inbound excise duty and outbound excise duty.
Also please find this links.
http://wiki.sdn.sap.com/wiki/display/ERPLO/CIN+Configuration
Need Cin Configuration related to sd
Thanks&Regards
Raghu.k

Similar Messages

SAP SD CIN Query- 7

Hi
I am facing a problem in CIN. The last updation date(J1I5) for for RG23A-1 is different from last extraction date (J2I5). The extraction date is ahead of updation date. If updation isn't complete for any particular date then system cant extract into the register for the same date.
pls help me with it.
Deepak

hi,
The last update date was 01.06.2010 and the last extraction date was 27.06.2010 It means the you have executed the transaction of j1i5 that is updating the registers on 01.06.2010 and if you have extracted on 27.06.2010 than the system will show the extracts till the ;ast update was done. So it might be possible that you have updated in 06 month and you are taking a print in 07 month and for that you have to extract it by j2i5.
So if you want the entries to come in the registers first update til required date and than extract.
Regards,
Krishna O

SAP SD CIN Query-3

Hi
I am facing a problem in CIN. I updated the RG1 register(J1I5) for only a few movement types and now when i try to extract it (J2I5). The system gives me error. No error details but only a Red cross mark against register name (i.e. RG1). Please suggest me what to do?
Deepak

Check enters in table:
1. J_1IRG1,
2. J_2IRG1BAL,
3.J_1IRGSUM
Then again update in j1i5 and extract j2i5 the data.
Refer link for understanding:
- RG1 updation
- Re: How RG1 reg update?
Regards
JP

SAP SD CIN Query- 6

Hi
Is there any standard working scenario (approach) for any particular list of movement types which are required (configured) only for updating RG1 register(J1I5) and other set of movement types which are for updating RG23 A & C? or any common movement type in this scenario?
Pls reply asap
Deepak

Hi,
Check the below link ,complete details are available
http://help.sap.com/saphelp_47x200/helpdata/en/04/ebf138cdd78a4be10000000a114084/content.htm
or
http://help.sap.com/saphelp_47x200/helpdata/en/1e/f4a1a011d811d4b5af006094b9ec21/frameset.htm

SAP SD CIN Query-1

Hi Experts
Pls help me with the following problem.
whts the functional/ technical working difference between updating RG1 and extracting it? (J1I5, J2I5). how to differentiate the update and extract RG1 register activity?
Pls reply asap
Deepak

Hi Deepak,
The difference between Update and Extract of RG1 is,
J1I5 - Update RG23A/C Issues and RG1
In this through the various classification types we update the RG1 register for different movement types.
Ex: RMA Receipt from manufacture
IDH Removal from factory on payment of duty for Home use
Regarding RG1 the above mentioned classifications should be used and update the register.
After this,
J2I5 - Extract
In this we will extract all the movement types which are updated in J1I5
and finally through J2I6 we can take print of RG1 register from SAP.
Regards,
kiran

SAP SD CIN Query-4

Experts!!
Is it safe to re-extract the RG1 register if i have completed the extraction for any given day. would it cause the multiple entries to exist in the table if i re-extract it?
Deepak

Hi,
No it wont cause any multiple enteries in the system irrespective of times you extract it..
Regards,
Krishna O

SAP SD CIN Query-5

SAP Gurus
Why do we update RG1 register(J1I5) for the movement type 101 with Classification type RMA? Isnu2019t it required to be updated in RG23A/C?
Pls reply asap
Deepak

Hi,
     RG1 updating
o     A register of excisable finished goods kept by manufacturing plants. The register shows goods movements from the production dept to a FG store specifically for excisable finished goods.
o     RG1 register is a daily stock account which contains receipt from production as well as issues from sale and other movements. RG1 will be updated using J1I5 transaction with different classification for receipt and issues.

SAP SD CIN Query-2

Dear Experts
is it possible to Update and Extract RG1 register(J1I5 and J2I5) for the current date(today's date) if we havenu2019t performed this activity for the previous date(yesterday's date)?
Wating for your expert suggestion.
Deepak

Hi Deepak,
Unless you update the resigters you wont be able to extract it.these both are different transaction but inter depenedent.
So first you need to do j1i5 and than j2i5 and than you can print using j2i6.
Hope this will resolve your issue.
Regards,
Krishna O

CIN related query

Hi
I am trying to configure CIN. I have configurde every thing that is cond type JMOD, JAEd etc and the resp. SD cond type JEX2, etc. I also configured the rates for UTXJ and maintaind the record in J1id. When I an creating the order the FI con types are not appearing
What could be the prob
Replay
Vinod

I hav checked it for other material and now FI cond types are coming. Now my new problem is that JNED & JSED are copying 100% of PR00, where as I have not mentioned any rates for this condition types where as I have maintained rates for JCES in J1id but this rate is not copieing and showing it as 0%.
What could be the reason
Pls replay
Vinod

Query: exemption form number (CIN)

Dear All,
I have a doubt regarding exemption form that customers use to claim their exemption.
From what I have read, alternative tax classification field of sales order header(billing tab)
allows us to choose the form type. But, where should i create the form type and where to mention the
reduced excise rates?
Any practical scenarios/examples in this regard are highly appreciated.
Thanks,
nsp.

Hi
The tax classifications are not linked with FORM. Forms are linked with the Sales Documents.
In the Tax Clssification we maintain different options like Without Form / With Form C / Full exemption, etc. for your Tax Category(tax Condition type) check this in OVK3. This will be maintained in customer Master data > Sales Area View> Billing Tab. Now when you create a sales order, the tax classification will flow from Customer Master to Sales Order Header --> Billing Tab.
There as per your requirement and the form provided by Customer you can change the Tax Category and accordingly the Tax will be changed in Pricing procedure (depends upon the master data you have maintained for that Condition type and for the Tax Classification).
Regards
Amitesh Anand

Cin registers query

hello all,
what is the diffrence between updating and extracting the registers.
is registers are not updated automatically when excise invoice is posted?
also explains the excise depot purchasing scenario from mm point of view.
pls explan me in detail,so that other sdn readers also benefit from this thread.
regards
sumit simran

HI,
In Depot plant register Rg23D will get update and no excise invoice will get generated means part2
rest process in sap as normal excise
table for depot is J_1IRG23D
read following link
[http://forums.sdn.sap.com/thread.jspa?threadID=1756210]
Regards
Kailas Ugale

CIN RELATD QUERY

hi friends,
can i know the present percentage of
BED
AED
SED
CESS
LST & CST ????
thanks
manu

Hi,
BED : 14%
AED : 4% (vary depends on the product)
SED : 4% (vary depends on the product)
CESS : 2 %
ECESS :1%
LST & CST ????
LST=VAT, it vary depends on State to State like 4%,12.5% etc.
CST : This is applicable for Intrastate sales and at present its 3%.
Rewards if it helps
Regards
Goutham

CIN-Two Export scenarios-Duty not paid & Duty Paid

Hello SAP SD CINers,
I have a basic requirement which is that one industry exports without duty paid (which is always the case) and other duty paid which means in the Billing document & the Export Excise Invoice the Price will be statistical but the Taxes like JEXP (IN: A/R BED %) will be accounted for.
The solution as formulated by us is that we have a new series created and then all seems right but the problem here is that it is very very difficult to get a new series from Customs for different busines scenario as normally only two are sanctioned like Home consumption and for Exports.A new Shipping Point be created specially for this scenario which can then be maintained in the Excise/Series group determination but the problem here is that one needs a new Series Group to be maintained which should have utilization not clicked as normally for exports it is ticked off for no utilization but here we need to carry out utilization.Hence, the requirement for a new Series is generated.This is very difficult to convince the Authorities to sanction a new series grouop as this is normally not done.
Could you CIN masters suggest something for this.
In Std SAP, we can have two order types for e.g. OR & RE to have the same No. range int. assignment which will cause the number maintained to find the next available number for both OR as well as RE..OR can have number "1" and RE can have number "2" & so on and so forth.Duplications dont happen here but in case of CIN Excise Invoices, this happens if we shift between Series "EX" (for export) & new Series say "S1" both of which have Object " J_1IEXCEXP" have same from -to numbers.
This problem can be easily be solved by making the changes in the source code which allows this two series groups to have the same number range and the numbers shouldn't get duplicated and the sytem should take in next available number just as this is done for Sales Orders.But that is a change, so we would request for some solution within the existing setup.
I am sure this problem must arise with almost all Indian export factories so there must be some workaround for this problem.
Kindly advice as this is very challenging scenario.In case of further queries, kindly send query for this & i will be looking forward to valuable inputs from you all regarding this.
Thanks All in advance.
Regards,
Dinesh Relwani.

Hello SAP SD CINers,
I have a basic requirement which is that one industry exports without duty paid (which is always the case) and other duty paid which means in the Billing document & the Export Excise Invoice the Price will be statistical but the Taxes like JEXP (IN: A/R BED %) will be accounted for.
The solution as formulated by us is that we have a new series created and then all seems right but the problem here is that it is very very difficult to get a new series from Customs for different busines scenario as normally only two are sanctioned like Home consumption and for Exports.A new Shipping Point be created specially for this scenario which can then be maintained in the Excise/Series group determination but the problem here is that one needs a new Series Group to be maintained which should have utilization not clicked as normally for exports it is ticked off for no utilization but here we need to carry out utilization.Hence, the requirement for a new Series is generated.This is very difficult to convince the Authorities to sanction a new series grouop as this is normally not done.
Could you CIN masters suggest something for this.
In Std SAP, we can have two order types for e.g. OR & RE to have the same No. range int. assignment which will cause the number maintained to find the next available number for both OR as well as RE..OR can have number "1" and RE can have number "2" & so on and so forth.Duplications dont happen here but in case of CIN Excise Invoices, this happens if we shift between Series "EX" (for export) & new Series say "S1" both of which have Object " J_1IEXCEXP" have same from -to numbers.
This problem can be easily be solved by making the changes in the source code which allows this two series groups to have the same number range and the numbers shouldn't get duplicated and the sytem should take in next available number just as this is done for Sales Orders.But that is a change, so we would request for some solution within the existing setup.
I am sure this problem must arise with almost all Indian export factories so there must be some workaround for this problem.
Kindly advice as this is very challenging scenario.In case of further queries, kindly send query for this & i will be looking forward to valuable inputs from you all regarding this.
Thanks All in advance.
Regards,
Dinesh Relwani.

Use an SQL Query in a backing bean

hi,
I like to know how to run an SQL query in a backing bean method, this being the code I tried , his goal is to fill the field "cin" with data coming from my database, here is the Code:
public String cb2_action() {
BindingContainer bindings = getBindings();
OperationBinding operationBinding = bindings.getOperationBinding("CreateInsert");
Object result = operationBinding.execute();
if (!operationBinding.getErrors().isEmpty()) {
return null;
DCIteratorBinding dciter =(DCIteratorBinding) bindings.get("PersonneView1Iterator");
Row row=dciter.getCurrentRow();
Statement stmt = this.getDBTransaction().createStatement(1);
try {
ResultSet rs = stmt.executeQuery("select max(cin) from personne");
while( rs.next() ){
row.setAttribute("cin", rs.getInt(1)+1);
} catch (SQLException ex) {
ex.printStackTrace();
return "go";
at run time it give an error at this line : Statement stmt = this.getDBTransaction().createStatement(1);
please check and correct me
thanks in advance

Hi,
Initially I would like to say that this should not be used if you are trying to get a PrimaryKey as it would cause serious concurrency issues.
For example lets say that you want whenever you create a new Employee to set his DepartmentId equal to the max department.
We could create a readOnly VO (lets name it MaxDepartmentId) with a query that returns the max departmentId:
select max(Department_Id) as maxDep from DepartmentsAfter that we need to add the MaxDepartmentId VO as a ViewAccessor in our Employees Vo,
override the create() method in the EmployeesRowImpl and add some code like this:
public class EmployeesRowImpl extends ViewRowImpl {
    @Override
    protected void create(AttributeList attributeList) {
        Row r=getMaxDepartmentId().first();
        if(r!=null){
             Number max=(Number)r.getAttribute("Maxdep");
             attributeList.setAttribute("DepartmentId", max);
        super.create(attributeList);
}That's all.
If you run this you will see that when you create a new employee it has a default value.
Gabriel.

CIN configuration in TAXINJ and TAXINN !!

Friends !!
Please help in configuring TAXINJ and TAXINN for VAT, Higher Edn.cess.If possible send me screen shots for the same and how to maintain taxcodes.
Thanks.
Yours sincerely,
sreedhar

Dear sreedhar kodali,
CIN Means Country India Version
In Indian Taxing procedure, Excise Duty plays a vital role in manufacturing cenarios. Excise related configuration is known as CIN configuration. CIN Configuration is a topic in itself.
Some info on CIN Configuration (it may not appear as understandable below, but if you check on screen, it will be understood better)
Country Version India comes with four pricing procedures as follows:
- JINFAC (Sales from manufacturing plants)
- JINEXP (Export sales)
- JINDEP (Sales from depots)
- JINSTK (Stock transfers
CIN: IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings > Maintain Excise Registrations
In this IMG activity, you maintain the data relating to your excise registrations.
- Enter each of your excise registrations, specifying a four-character code for each Excise Registration Ids
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
- For each excise registration in your business create a registration ID, and state:
- Which taxes the registration covers (additional excise duty, special excise duty, and cess) Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
- The maximum number of items to be printed on each excise invoice
- Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
ECC Number: Specifies the organization's ECC number.
Excise Registration Number: A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division: Specifies the excise division in whose area the excise registration is located.
Excise Collectorate: The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming, AED usage Additional Excise duty Percentage.
These are livable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty. Example - Additional Excise duty is livable in case of textile products, tobacco and sugar.
Similarly for SED CESS Number of Items in Excise Invoice Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies - This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements. This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description: Description of the excise registers set.
Partial CENVAT Credit: Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account
Dependencies - When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings.
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings.
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator - Excise year start month. The calendar month marking the beginning of the excise year. This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure :Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received. Number of excise invoices to be selected Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection Number of days from document date for excise invoice selection.
Example - If the value of this field is 20 and today is 28-03-97. The excise invoice selection will show the related invoices only for the period 08-03-97 to 28-03-97.
Document type for TDS FI posting: Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation Financial accounting document type for TDS posting.
Indicator for item level excise duty round off - This indicator is to be used for deciding whether Item level excise
duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice - You can round off the Excise amount to be paid during an outgoing
Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods - Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts. The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account - Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type - Key representing a type of exchange rate in the system.
- You enter the exchange rate type to store different exchange rates. Example - You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts - When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings - In this IMG activity, you maintain excise information relating to your plants.
Plant Settings - In this activity, you maintain excise information relating to your plants.
For each plant:
- Specify whether it is a manufacturing site or a depot.
- Assign it an excise registration ID. - You can assign the same ID to more than one plant, if required.
Depot - Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- Number of goods receipt per excise invoice.
- Multiple GR for one excise invoice, Single credit
- Multiple GR for one excise invoice, multiple credit
Maintain Excise Groups - In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups - In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation - Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
1. Create one excise group for each set of registers that you need to keep.
2. Assign the excise groups to plants.
3. Maintain whether this Excise group is for a depot or not.
If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'.   Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock. Excise Group Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration. - In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to. At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot. - Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
- GR Per Excise Invoice
- Multiple GR for one excise invoice , Multiple credit
- Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically - Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background. - If you want to make use of this function, you must also define the
default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option - RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.   If this is not selected then you need to separately do RG23D selection
followed by PGI and then RG23D verification and posting. If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR - If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo Posting - If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
- Blocked stock
- Stock transport order
- Consignment stock
Maintain Series Group - In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents. Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
- Define excise series groups based on type of outgoing document
- Assign series group to excise registration ID
- If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
- If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' Iindicator.   Example - You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
- No account postings for CENVAT in sales cycle
- No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
If the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT - Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators - In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty > Select Tax Calculation Procedure
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
- If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
- If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults - In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
- Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
- Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
- Specify the conditions in the sales order that are used for excise rates.
- Specify the countervailing duty condition type used for import purchase orders.
See also : SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features : The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Customizing : Make the settings in Customizing Basic -> India -> for Logistics General, by choosing Taxes on Goods Movements Account -> Excise Duties Using Condition Technique and -> Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data - Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities - When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.   On the dialog box, Control Code means "chapter ID." So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required. - In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination - When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data®access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
- Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone. See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
- Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry. For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
- Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
- Material master data
Each material is assigned a chapter ID.
- Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant. Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indicator is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under
status 7.
Define Tax Code for Purchasing Documents - In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents. Only carry out this activity if you use condition-based excise
determination.
- Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
- Assign Tax Code to Company Codes
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types - In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method. The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a
purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here. In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
- For taxes on purchases, use the condition types contained in the tax procedure.
- For taxes on sales, use the condition types contained in the pricing procedures.
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes - In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements - You have set up G/L accounts for each of the processing keys listed below.
- Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
- VS1 (basic excise duty)
- VS2 (additional excise duty)
- VS3 (special excise duty)
- VS5 (sales tax setoff)
- MWS (central sales tax)
- MW3 (local sales tax)
- ESA (service tax)
- ESE (service tax expense)
Specify Excise Accounts per Excise Transaction - In this IMG activity, you specify which excise accounts (for excise
duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type. If you use sub transaction types, enter the accounts for each sub transaction type as well.
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly. The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example:
- Excise TT DC ind Account name
- GRPO CR CENVAT clearing account
- GRPO CR RG 23 BED account
- GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction - In this IMG activity, you assign the excise and CENVAT accounts to G/L
accounts. When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
- Excise group
- Company code
- Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
- Defined the G/L accounts
- Defined the excise groups
- Maintained the transaction accounts
Activities - For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note : you need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty. Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small configuration step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
- Material Master à Logistics General
1. Go to IMG Define Structure of Data Screen for each Configuring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Sub screens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view sub screen and ensure that the sub screen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade
Import, Excise related sub screen appears.
A small search on SDN SD forum will help you to answer your query.
I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
Moreover there is a separate section of FAQs with answers which will help you in great deal.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details

CIN query

Similar Messages

Maybe you are looking for