Cin syllubus for mm consultant and pls give a link

dear experts,
cin syllubus for mm consultant and pls give a link pls
rsk

I'd recommend some foundation elearning first like perhaps TERP10 and TERP01 so that you get an understanding of the fundamentals and the integration dependencies.
TERP01: SAP ERP: Introduction Elearning
Also consider
ERP406: Inventory Management
ERP407: Material Requirements Planning & Physical Inventory
ERP51: Material Planning Business Processes Elearning
Depending on your location you should be able to find local training for your geography if you don't like self study
check out
http://www.sap.com/index.epx#/training-and-education/index.epx

Similar Messages

  • Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas?

    Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas? Thanks for any assist!

    Hi Ken,
    Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
    I am looking at a product called wmobile, but may be problematic on my current system.
    thanks for any help...

  • Need to create a Store Business document type for material master and store a sharepoint link

    Hello,
    I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a  store business document that it will automatically saves to sharepoint?)
    Thanks,
    Ran.

    >
    dhayes12 wrote:
    > A)  When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK.  I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
    >
    > B)  When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02.  If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above)  I need to be able to select the plan like I can with the 04 type.
    >
    > Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
    For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
    For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
    Thanks!!!

  • Y I can't purchase anything in a game when I tried too it will show the message try to contact here for solving the issue pls giv me a reply

    PLs giv me a reply or help me fix this cuz I can't buy anything from game but I can only buy apps

    Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
    If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
    Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
    I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

  • Can i consolidate all of my comments to the top of the document for a summary and then have these linked to the position in the doc, using adobe reader on i pad?

    HI, can i consolidate all of my comments in a document to the top for quick review and then click on each ro jump to the posi in the text? I am using adobe reader for ipad. Thanks

    Hi Steve,
    Thanks.  I have it sussed.  I saved from Ipad to Acrobat.com, but the functionality in AC.com is crap so I download to hard drive and open with reader on my hard drive and that way can see the comments.  I'm sure there is a better way to do this so will keep playing around with it.
    Also, do you know how I can include my text comments in IPAD PDF in the search function of PDF reader for IPAD? Say for example I want to search for the word action through a 200 page document.  It won't search the comments as nothing found when I search through a scanned document.
    Thanks again,
    Graeme
    Perth WA

  • HT4796 Are there other things that need to be done for the Mac and the PC to link up.  Mine are on the same network.  I have enabled sharing.  The PC does see the Mac in its network but they just won't link up.

    I am trying to migrate my iTunes information from my PC to my Mac.  I have installed the migration software required on the PC.  The problem is that the Mac and the PC never link up even though from the PC I can see and access the Mac in it's network neighborhood.

    I am trying to migrate my iTunes information from my PC to my Mac.  I have installed the migration software required on the PC.  The problem is that the Mac and the PC never link up even though from the PC I can see and access the Mac in it's network neighborhood.

  • Can you buy something using your own apple account on someone else's iPad? If I log in and buy stuff for a friend and then give it to her, can she then log in and buy/rent more things using her own account? Want to give it loaded with starter things!

    My friend is sick and I want to buy her an iPad and load it with my songs and buy her some apps and movies. Can I give it to her and then she can log in using HER user name and buy more things? It might erase all I gave her? Not sure what to do because she won't have time or energy to fool around with all the great things there are and would appreciate us doing that part for her. Later, when she is feeling better, she may want to rent a movie or buy and app. Not sure how this works.
    Thanks,
    Jan

    You friend has no legal right to any songs bought from your account and will lose them when synced.
    There are gift options.
    iTunes Gift Options

  • Pls give me link for urdu font in reports

    hello and hi any body send me link to dowload urdu font to use in reports
    pls reply

    Hello
    to dowload urdu font what kind of font is that..?
    search google if exist..!
    Regards,
    Abdetu..

  • TS1702 I have paid for apps before but I am trying to download a free app but it asks me for bank details and I give my details and it says my security card number is wrong? How can that be when I have paid for apps before

    Please help me. I can't seem to download free apps anymore it says my billing details are incorrect. But I have clearly hot apps before

    This link should help you with that:
            http://www.apple.com/support/itunes/contact/

  • Need Help with EEM script for monitoring Rx and Tx load on Link

    Hello,
    I'm trying to implement a script, which monitors the Tx and Rx Load on the Link and sends a syslog in case the load is exceeded 200 mark (i.e If Rx or Tx load > 200)
    I have implemented the following script. But it is not giving the required results.
    event manager applet test
    event interface name Tunnel111 parameter rxload entry-val 200 entry-op gt entry-val-is-increment true poll-interval 5000
    action 1.0 syslog msg "Increase Load On the Link"
    I'm trying to monitor the load on Tunnel 111 which is mapped to WAN interface.
    Router (Cisco 2821) has following IOS
    c2800nm-advipservicesk9-mz.124-25g.bin

    Hello Joseph,
    As per your suggestion, we made some changes in our script and the following script is working fine. Its giving the required syslogs when the load is exceeded.
    event manager applet test
    event interface name Tunnel111 parameter txload entry-val 200 entry-op gt entry-val-is-increment false poll-interval 5
    action 1.0 syslog msg "Increased Load On the Link"
    Your prompt assistance is really appriciated.

  • Pls give some shell scripting for sql/plsql

    pls give some shell scripting for sql/plsql

    794244 wrote:
    pls give some shell scripting for sql/plsqlNeither SQL or PL/SQL are shell script languages. Both are server side languages that executes inside an Oracle database server process.
    This is an important concept to understand when using SQL*Plus for example to "script" interaction with an Oracle database.

  • ABAP Documents for BI consultants

    what all the requirements to learn the ABAP for BI consultant ?
    please give in details or send the documentation links
    Thanks
    Lohith

    Hi Sasi,
    All the objects which you create in BI will be stored in some standad tables,it only fetch details accordingly from those tables.For MasterData you can find the option as Display Routines in Extras.If you want to get more infomation about the STD Table and the Program involed in BI objects,just enter in (/h) mode.
    Regards,
    Prem

  • Searching for missing files and damaged photo icon

    I am trying to view photos that I have viewed in this program numerous times before but now when I click on the photos, I get a message that says "searching for missing files". Sometimes, the photo appears with a red icon below it that resembles a wripped photo. Does this mean my photo has been damaged by the program?

    I too have been told to find them on my hard drive but still nothing comes up, I can find the picture name and then do a search, but nothing. I've tried several times and it just keeps saying seach for missing files not found. I can see my collection of pictures, but there blury and then when I try to click on them, it says searching for missing file and it gives me the file name, and then I've tried to go under my search and put that file name in and nothing comes up, I also got NO help from adobe and they want us to buy more products??? They could have warned us somehow on what happens if you move them or try and put them on disc, and that's what happen, I put some on disk or at least thought I did and then realized I didn't want to do that, so I hit the UNDUE and I guess it was so late or something, cuz I can see the pictues, just can't open them. I'm wandering if I need to have a expert see if he can get them off of Adobe, I really want the pictues I have graduation pictures on there and need them very much. Would love to have help from anybody. Please.
    Thank you
    K

  • PP  functional knowledge for BW Consultant

    Hi experts
    Could you please tell me the functional knowledge of PP required for BW Consultant and very thankful to you if you mention the business flow of PP and its integration with other modules.I have gone through forums but i didnt get these things.
    Thanks in advance

    The basic idea is, no one can master everything especially in SAP.
    And the practical tips are listed as below
    1) Go through PP overview, gain the basic concept such as Material Master / Work Center / Routine ... And you'd better to know SOP / FCST / Order / LTP / MPS / MRP / Production Order ....
    2) Go to BI BP, try
    B80: Production Plan-Actual Analysis
    B81: Period-Specific Analysis
    B58: Capacity Load Utilization
    B65: Status of Manufacturing Orders
    BI1: Goods Issue Error Handling
    3) Compare your previous BW project experience on other modules.

  • Necessary Authorizations for BI Consultant

    Dear All,
        What are the necessary Authorizations for BI 7.0 Consultant to work on a BI development system ?
         I have created source system (ECC Dev system), installed Bex analyser and I would like to verify if there are any standard tasks to be performed to make the system ready for BI consultant and required authorizations to perform all the activities.
    Thanks,
    Nick.

    Hi,
    The basic authorizations you need are RSA1, then you need to have access to all the infoareas, objects. You need access to modify, create, activate objects. In addition you'll need access to maintain master data for master data objects, monitor job loads, process chain access, query creation and change access. Query execute access. Authorizations to replicate datasources, activate them and access for creation, change and activation of DTPs, Infopackages and Transformations is also needed.
    These are some of the basic authorizations you need in the development system.
    For all other systems, you only need display authorizations for all objects.For data viewing, it'll be based on what security you get. Based on the client strategy in some places, you might get authorization to create, change and activate infopackages and DTPs. But to maintain the integrity of the Process chains and the environments, the best practice would be create these objects in dev and then transport them.
    Cheers,
    Kedar

Maybe you are looking for

  • Convert date/time to Unix epoch

    I have thousands of date time stamps I would like to convert to Unix epoch ten-digit strings. That is, take some thing like: Dec 9, 2005 10:24 AM and convert to 1234567890 (only in the correct unix epoch time) What formula can I use? I've found that

  • Why did apple take iPhoto?

    Okay, last years "Big Thing" was iOS 7 and the iPhone 5 series. They gave us iPhoto, iMovie, Pages, you get the gist. Now a year later they take back iPhoto. What gives?  Is there a reason for this not working with iOS 8?  I lost family videos I made

  • Battery check script

    Hi all!  I'm sure this one has been done to death, but with.  It's a script to monitor a laptop battery and react accordingly.  I wrote this for use with FVWM, to send out warning notices using libnotify when the battery gets too low.  Since my lapto

  • Role Authorization Profile Search

    All, We are trying to identify all the derived/single roles that are not generated without going into each individual role and looking.  Is there a serch or query that allows us to identify what roles are not generated? Also, with these roles we have

  • Compressor mysteriously closes my FCP project.

    For some reason, when I hit 'submit' in compressor, it closes my Final Cut Pro Project. At the same time, it creates a new sequnce with a long numerical file name. This just started happening out of the blue. Does anyone know what's happening?