Cinelerra problem with video in the composer window

Hi,
After going through many distributions here I am a happy User's Arch.
One thing I feel very lacking in Linux, even more today that I do not use windows at home for anything is the fact that I can not find video editing software that is really good.
As researched a lot and not found anything that is really good in terms of video editing, I believe that it should meet my Cinelerra nescessidade because he in fact work this transaction and videos, etc ... Despite not liking anything on your interface would be able to use it.
If anyone has any tips please help!
The problem is that some crashes are annoying in the Composition window where it plays the video, it's not like I had with 3D acceleration.
And really annoying, I can not do anything without seeing the video in real time as it's getting and the parties must move ...
I tested several software recommended and one that I liked was the Avidemux which unfortunately does not work with multitrack and has no effect. The demics found it very bug. The Pitivi the crash here whenever I zoom in the video track ...
An error that could not noticing this is in red below when I install Cinelerra.
Continuar a instalação? [S/n] s
:: Obtendo pacotes do repositório extra...
ilmbase-1.0.1-1-i686 313,9K 60,4K/s 00:00:05 [######################] 100%
openexr-1.6.1-1-i686 3,3M 256,1K/s 00:00:13 [######################] 100%
verificando a integridade do pacote...
(3/3) verificando conflitos de arquivo [######################] 100%
(1/3) instalando ilmbase [######################] 100%
(2/3) instalando openexr [######################] 100%
(3/3) instalando cinelerra-cv [######################] 100%
Deps Opcionais para cinelerra-cv
libgl: needed for the X11-OPENGL video driver support
My 3D acceleration is enabled, I have a good hardware ...
Proc: Core (TM) 2 Quad CPU Q8200
Distro: Arch Linux i686 + compiz + gnome (in desperation I tried to disable compiz tb and nothing ...)
Motherboard: Asus P5Q
Mem: 4GB
Video: 9800GT
My video card is properly installed, so that the game Counter-Strike Source online with no problem locking or low performace via Wine.
I made a video also likely to demonstrate better to the problem, note the constant locking Composer window.
If I leave the video running too long, it speeds up from nothing and and then starts playing normally, follows:
http://www.youtube.com/watch?v=Fku-juUTmbU
Sorry for bad english
Thanks!
Last edited by cellexpert (2010-10-07 02:12:58)

Hi,
I noticed that the problem is related to libgl same.
The NVIDIA drivers make a link to this file sombolico thus
lrwxrwxrwx 1 root root 10 Out 10 20:12 /usr/lib/libGL.so -> libGL.so.1
lrwxrwxrwx 1 root root 15 Out 10 20:12 /usr/lib/libGL.so.1 -> libGL.so.256.53
-rwxr-xr-x 1 root root 765460 Out 10 20:12 /usr/lib/libGL.so.256.53
I tried to remove the symbolic link and the program crash when I play the video
I think that's why I can not use other programs that want video acceleration, eg
Pitivi -> lock and close (crash) when I zoom video
Google-Earth -> tb's crash when a dialog will appear (those with balõezinhos info)
There is another that I can not remember now.
I tried using the nvidia driver directly from the site, version 256.53 Geforce 9800 GT
It's the same problem ...
I tried the version contained in the 173 nvidia pacman repositories and it's the same problem.
If someone can give me a help, thank you!
Att

Similar Messages

Problem with profiles in the site window

Hey everyone,
I've been looking all around the web for this and couldn't
find it.
I have a major problem with DW site window, more specifically
the profiles: it is way too slow !!!!
1. When i change from a site to another one, it takes up to
10 sec.
2. When i want to change the settings of a site it takes up
to 20 sec to open the properties window...same as when I want to
add a new one.
3. Sometimes, the login/pass of my FTP acount is forgotten
and i need to re-enter it !
All the rest is fine and works perfectly as usual, so it may
not look as my PC is involved...
I've tried to uninstall and re-install DW but it does not
work as the profiles may be stored somewhere else and as soon as I
open my new DW, the sites are in !
Can anyone could tell me where are stored those profiles so I
could try to dump all about this and re-install DW.
Thanks
beefo

> Sometimes, the login/pass of my FTP acount is forgotten
and i need to
> re-enter
> it !
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=3491671c
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"beefo" <[email protected]> wrote in message
news:f1uv98$a8$[email protected]..
> Hey everyone,
>
> I've been looking all around the web for this and
couldn't find it.
> I have a major problem with DW site window, more
specifically the
> profiles: it
> is way too slow !!!!
>
> When i change from a site to another one, it takes up to
10 sec.
> When i want to change the settings of a site it takes up
to 20 sec to open
> the
> properties window...same as when I want to add a new
one.
>
> Sometimes, the login/pass of my FTP acount is forgotten
and i need to
> re-enter
> it !
>
> All the rest is fine and works perfectly as usual, so it
is not my PC that
> is
> involved...
>
> I've tried to uninstall and re-install DW but it does
not work as the
> profiles
> may be stored somewhere else and as soon as I open my
new DW, the sites
> are in !
>
> Can anyone coul tell me where are stored those profiles
so I could try to
> dump
> all about this and re-install DW.
>
> Thanks
>
> beefo
>

Problem with Body of the main window

Hi friends,
While Printing the smart form the main window body is not reaching to the end of the main window dimensions.(There is no footer for the main window).
Its Printing all the records and at the end its giving one line gap.
My problem is the vertical lines will come, up to the line items it's having. and d last gap am not getting any lines.as the body is not reching to the end of main window.
Plz help me why its taking one line Gap in d main window Body.

Hi Farook,
Select the line types and assign the patterns to display the lines properly.
Regards,
Sravanthi

Firefox freezes when i visit websites with videos on the background or i watch videos.I have windows 7 and the laatest version of mozilla.

I have windows 7 and the latest version of firefox.When i watch videos on youtube or visit websites with videos on the background mozilla freezes. I tried to disable all the extensions and plugins but it had no result.I didn't had this problem with versions of mozilla previous to 4.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.

I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.

Exactlly which model iMac do you have?
see > How to identify iMac models
Unfortunately that is not all that uncommon for the Early Intel iMac's given there age and the fact that the air intakes are probably choked with dust. Then add the extra heat caused by running a more intense OS X which is causing it to run a little warmer than normal and putting extra stress on the graphic and display components.
My 6½ year old 17" Early 2006 Core Duo w/2GB of RAM is also running 10.6.8 and is also starting to get a single line that (knock on wood) goes away after a few minutes, while many others started getting permanent ones after 2 or 3 years. One thing that I think has helped, is that about every 3 or 4 months I shutdown and vigorously vacuum out the bottom grill work and small vent under the stand to keep it running cool.
On that note: unfortunately I can only suggest that you clean your intake vents and hope that no permanent or irreversible damage has been done.

I have a problem with my iPad, the "other" part of the capacity summary keeps growing like ****

Dear all: I have a problem with my iPad, the "other" part of the capacity summary keeps growing like ****, every time I sync the iPad gets bigger and bigger. What is this "other" and what do I do to keep it from getting bigger? Thanks to all!

Marcos,
I did not try your trick, didn't see your post until after i visited the Apple store. The tech at the genius bar did not know why my "Other" memory had grown so huge. It was over 24GB, which only left me with 1 GB free on my 32GB iPad. I had been loading and unloading video's yesterday thru itunes to try various compression settings. I did not notice the other categrory growing until I tried to load a 3 GB movie file and it told me I was out of memory.
I probably loaded and unloaded 30 different times, trying different compression settings. In the process of doing this, it apparently loaded up the "Other: stuff. To me it seems like recycle bin in windows, but no one knows how to free it up.
So here is what he did and it worked. He reset the iPad. Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears. Then he hooked it up to itunes on his computer. Fortunately I have everything backed up on my home computer. When my iPad showed up on iTunes at the store, it showed the 24 MB of "Other" momentarily, then it reduced to about .7 GB giving me 24.5 GB free. Resetting it seemed to do the trick, but he still could tell me how this is happening and how to prevent it.
I think I'll try to call someone at applecare to get an explanation, hopefully.

Problem with Video capture Device

i have a problem with FME. i am using Avermedia TV capture
device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
the FME interface the warning given for " Problem with Video
Capture Device".
i read all the topics in Flash Media Encoder Category, if
this problem occures my capture device ( i expect MPEG ) how to
solve this problem?
Thanks,

The Device Matrix is something we'll be updating in the
future as we continue to test more and more equipement. Ideally, I
would like for users such as yourselves to be able to add to it and
tell us what has worked for you as well. If anyone has any ideas
about what technology we should use to do this (e.g., this forum? a
wiki?) please let me know.
Regarding the devices not working - the main problem we see
is that the system requirements are not being met. Here is what to
check for:
- are you running on Windows XP (only supported OS right
now)?
- do you have DirectX client runtime version 9c or higher
installed?
- do you have hardware acceleration enabled?
- do you have 32bit graphics enabled?
- do you have the latest direct show drivers from the
card/device manufacturer?
Thanks,
Chris Hock
Adobe Systems Inc.

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

When using Final Cut Express, the video in the Viewer window looks fine, but when I insert the video into the Canvas Timeline it appears to lose resolution, and look fuzzy and blurry. Are there preferences or settings for the Timeline that cause this?

Thanks David. I had to convert the mts file to Quick Time (using AunSoft Conversion software) before I could import it into Final Cut Express. And I made sure I kept the size of movie (720 X 480 with letterbox) to compliment what I set my Panaconic AVCCAM video recorder at (720/60). Even after I fully render it, it still looks fuzzy in the Canvas window at the right that plays what I have editing down in the Timeline. A friend that edits some using Final Cut Pro helped me to narrow things down to this problem. This is also wierd. If my Viewer window at the left is set to 200% to get the person's head the same size in the Canvas window at the right we needed to put it to 400%. Does this make any sense. We think we need to control the Time line resolution somehow but cannot find any options from my manual, or the help, or in the various drop down menus. Do you have any clue? What is going on?

Problem with video games

Hi all,
I have a problem with video games on Windows 8.1.
On my Windows 7 I could play all games without any problems.
Now I installed Windows 8.1 and I have problems with running video games: lower FPS, game breakdowns and sometimes even texture problems inside the game.
I tried to reinstall both Windows and Graphic drivers. I tried several versions of drivers.
I have Radeon HD 6870 and AMD Phenom II X4 955, SSD disk, 12 GB RAM.
The point is: the same games works perfect on Windows 7 but doesn't work right on Windows 8.1.
Can you, please, tell me if is there any other solution except going back to Windows 7 ?

Hi,
Please verify if these games are compatible with Windows 8.1.
If yes, please download and install the proper version of game file and driver.
Karen Hu
TechNet Community Support

Problem with tv@nywhere plus on windows 8

hi
i have a problem with tv@anywhere plus on windows 8. i can setup the pvr plus app completely but when i open that and click on "watch and record dtv program" icon, i will see an error that says: "invalid class string!"
i think this problem should be for its driver because i'm using windows 8 64bit and the driver is for windows 7, i couldn't find an appropriate driver for windows 8 on MSI driver downloads, as matter of fact it didn't exist.
so what should i do for my problem?

I'm afraid TV@nywhere Plus is a bit outdated for Win8. There is no update so far since 2010. Could be MSI won't add Win8 support if it would be anyway possible.

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

Is there a procedure to open keynote 09 files with videos in the new Keynote without converting videos?

is there a procedure to open keynote 09 files with videos in the new Keynote without converting videos?
I have a big presentation with many video mov and avi files created with Keynote 09. When trying to open the file in the new Keynote the procedured crashes and Keynote crashes abruptly. It seens that an avi file is not converted. I have no more the old Keynote 09. How can this problem be solved?

if you right click or control click on the file, do you get an option to 'show package contents'?

Problems with videos when I export

Hi,
I have some problems with my videos when I export them. I edit my video, but I have problems with audio in the exported video. Either the audio is missing completely or I hear the audio from another videoframe. I thought that the transitions are the problem, but they're not. Sometimes I have the problem also when I watch the video in iMovie. CAN SOMEONE HELP ME?

Welcome to Apple Discussions Alek,
Does this issue happen with more than one project in iMovie or is it just one?
If the audio is out of sync or missing and it is confined to only one project, the most I can suggest is that you restore from a backup copy as that suggests the project file is corrupted.
If the issue is happening in multiple projects do a test to make sure iMovie is working correctly:
Capture 5-10 minutes worth of iSight footage.
Edit the movie adding a few titles and transitions.
Export to quicktime.
Is the audio correct here?
If the audio is fine that means that iMovie is fine. Something is wrong with the projects or the original footage. You could try taking the Event you are working with, adding it to a new project, and then without editing it, export the entire project out as Quicktime. Then import the resulting file as a new event. The process of exporting (encoding) and then re-importing might clean up minor corruption within the file.
Hope that helps

Problem with video playback with iTunes

Several problems :
Problem with video playback with iTunes -
Since about a week, When I launch a video, it takes a long time to get started, then only the sound starts with no pictures - If I press pause then play the video is played normally. Did anyone face or heard about same kind of issue .
Problem with permission disk errors
After re-installing White Tiger and After I installed the last OSX 10.6.5 update
I found the following problem
Group differs on "Applications / Utilities / AirPort Utility.app / Contents / Resources / wanArrow.png", should be 0 instead of 80.
Last but not least :
My computer seems slow - I have 60gig free on My hard drive and I test my hard drive and everything seems all good .

What was the fix for this? Everything has sucked for my itunes video playback since the last major revision release.

Cinelerra problem with video in the composer window

Similar Messages

Maybe you are looking for