Cineon LOG 2 LIN render then back again

Ok so I've done some reading on the subject of converting from Log Cineon to LIN using the Cineon converter utility effect. The problem is I need to render out the Lin files so I can do some touch ups in Photoshop. However I cannot render it out without clipping the whites to 1. Is it even possible to render out a Lin file that can then be converted back to Log without loosing any overwhite data. Im not sure what Im doing wrong, if anything. I am using After Effects 7.0 pro and photoshop cs2 on a windows based OS. Thanks for any help.

Using Photoshop because of the healing brush tools and the patch and extraction tools. I am a big proponent of the After effects studio tech books, even have the last two editions. But none of them ever talk about what to do if you Convert from Log to Lin render out the sequence and then reimport it and convert back to Log without losing any of the overbright values. I know it sounds strange that I am using PS for this but it is just easier than creating multiple layers that then have to be blended in proper. In any event it is more out of principle now that I want to know if anyone has a procedure for this. I can't be the first one who has tried to convert Log to lin and rendered out a 16bpc image and then wanted to convert it back. Ill mull over my books again, hope I havent turned everyone off this subject

Similar Messages

When i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

hi
... i have a similar problem
but just with the sleep botton.
fist use your adapter with other iphone/itouch ... is posible itś the problem
second .. let your phone charging
...normally if we conect our phone ... after some minuts it's put on.
after 2 hours ... trate to use it ... if after it your phone continue same... could be qaa electrical/physic problem
please if you have a guaranty use it.
im sorry but my english is terrible.

My Macbook wont turn on, it gets pasted the White Apple screen then goes to a Blue screen that quickly turns a slightly darker shade of blue with the familiar loading icon then back again and does this over and over. What should I do? please help!

So today my iPhone decides to go into recovery mode on me randomly so I plugged it into my Macbook right away, but it wasn't showing up in iTunes so I did a quick internet search as to why that could be. On the Mac support forum I found instructions stating I should make sure I had the current verison of iTunes on my computer, turns out I had been putting off an Update because I didn't like waiting for it to restart n so forth. So I clicked my boucning update friend at the bottom of my screen and it started checking for updates, the bar got maybe a quarter of the way up and then stopped moving all together, I thought something was wrong so I clicked cancel and tried again. The same thing happened so I clicked cancel and went back to the Internet to find more help on my problems. I found yet another forum saying this solution was simple, restart the computer. So i clicked my little apple at the top and pressed restart and that has been the last thing I got to do on my computer because when it restarted it got past the White Apple logo screen and went on to a Blue screen which quickly turned a darker shade and had the loading circle, then back to the previous blue screen, then right back to the darker one. This process it repeated several times and I can't for the life of me figure out what to do. Please someone have a simple answer to this that I haven't Already tried, I have already tried safe mode and it just doesn't work for me. Please please help I need my computer for class it has all my notes and a paper I was doing, not to mention my iphone is still in recovery mode, even when I can get to another computer to fix that I need all the back up files off of my macbook to restore it to what I know it as and not default.

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

Can I restore Time Machine "B" to Macbook "A" and then back again?

My family had 2 Macbooks-- I'll call them A and B -- each equipped with an external USB hard drive that we used for regular Time Machine backups.
Macbook B contained some digitized family videos. About 8 months ago it was destroyed by spilled coffee (family member shall remain unnamed!) Apple tech said it would cost as much to repair as it would to replace, and I ended up doing neither. Coffee-spilling family member went off to college with a new Macbook Pro (equipped with a thin plastic keyboard cover!!!)
Macbook A continues to be used, and backed up (by a family member who doesn't drink coffee, BTW).
I would like to recover those video files -- at least to burn them onto DVD's or whatever -- but I'm assuming the only way to access files from a Time Machine backup is to restore that backup onto a Macbook.
So I'm wondering if I can be sneaky by restoring Time Machine "B" onto Macbook "A", getting those video files copied off it, and then restoring Time Machine "A" back onto Macbook "A" again. Would there be any ill-effects from doing this?
Thanks!
Joe

No. See:
iOS: Unable to restore from backup of a newer device

How to move focus from one JTree node to another one and then back again?

Hi all!
Say I have a very simple JTree
package main;
import java.awt.BorderLayout;
import java.awt.Container;
import java.awt.event.WindowAdapter;
import java.awt.event.WindowEvent;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTextField;
import javax.swing.JTree;
import javax.swing.event.TreeSelectionEvent;
import javax.swing.event.TreeSelectionListener;
import javax.swing.tree.DefaultMutableTreeNode;
public class SelectableTree extends JFrame implements TreeSelectionListener {
    public static void main(String[] args) {
        new SelectableTree();
    private JTree tree;
    private JTextField currentSelectionField;
    public SelectableTree() {
        super("JTree Selections");
        addWindowListener(new WindowAdapter() {
            public void windowClosing(WindowEvent event) {
                System.exit(0);
        Container content = getContentPane();
        DefaultMutableTreeNode root = new DefaultMutableTreeNode("Root");
        DefaultMutableTreeNode child;
        DefaultMutableTreeNode grandChild;
        for (int childIndex = 1; childIndex < 4; childIndex++) {
            child = new DefaultMutableTreeNode("Child " + childIndex);
            root.add(child);
            for (int grandChildIndex = 1; grandChildIndex < 4; grandChildIndex++) {
                grandChild = new DefaultMutableTreeNode("Grandchild "
                        + childIndex + "." + grandChildIndex);
                child.add(grandChild);
        tree = new JTree(root);
        tree.addTreeSelectionListener(this);
        content.add(new JScrollPane(tree), BorderLayout.CENTER);
        currentSelectionField = new JTextField("Current Selection: NONE");
        content.add(currentSelectionField, BorderLayout.SOUTH);
        setSize(250, 275);
        setVisible(true);
    public void valueChanged(TreeSelectionEvent event) {
        currentSelectionField.setText("Current Selection: "
                + tree.getLastSelectedPathComponent().toString());
}All I need is to move focus from currently selected node, to some other node (does not matter which one), then to "sleep" for a second and finally move it back to return selection to the previously selected node. The only question is how do I do this?

Use a Seperate Thread to do it:
Runnable r = new Runnable() {
    public void run() {
               int k=tree.getSelectionRows()[0];
               DefaultMutableTreeNode node = (DefaultMutableTreeNode)tree.getLastSelectedPathComponent();
                            if(node.getNextSibling()!=null)
                                 tree.setSelectionRow(k+1);
                            else
                                 tree.setSelectionRow(k-1);
                            sleepe(k);
public void sleepe(int i){
                     try{
                            Thread.sleep(1000);
                                 }catch(Exception e){
                                     e.printStackTrace();
                              tree.setSelectionRow(i);
    }Then start this thread in a mouse click event(or any other similar),but not in TableSelectionListener because >>if the current selected row is 1 then it will execute the valueChanged method of TableSe..li. and we set the selected row to 2 then again it will execute the valueChanged method of TableSe..li.It will repeat till something,or in error.
tree.addMouseListener( new MouseListener(){
public void mouseClicked(MouseEvent e) {
                   new Thread(r).start();
public void mouseEntered(MouseEvent e) {
public void mouseExited(MouseEvent e) {
public void mousePressed(MouseEvent e)     {
public void mouseReleased(MouseEvent e) {
});Note:it worked perfectly for me. So add all the above in the right place and import necessary.It will execute perfectly.

When external speakers are plugged in to headphone jack, sound randomly goes back to internal speakers or digital audio setting, then back again

I have an essentially new MacBook Pro with Lion and all updates applied, and am wondering if this is a hardware or software problem. Essentially with something plugged into the headphone jack, things work as they are supposed to for a while, then the sound will switch back to internal speakers, or sometimes 'digital out' (I can watch it change in the system settings), and then often switch back. It doesn't seem to follow any sort of pattern or be related to any specific application that could be open, and happens with different sources of audio (iTunes, streaming from the web), and different external speakers or headphones plugged in.

Sounds hardware related. If it's brand new, and you're still under warranty I would have it checked out.
I have not experienced this on my computer.
As I understand it, you have analog RCA outputs from an 1/8" to left and right RCA outputs. when you're randomly using the computer, it'll switch to internal speakers, then to digital audio, back to your stereo analog external speakers.
This should not be happening and if it's happening with streaming content (I am unaware of anything that streams in 5.1 digital audio) then this must be something that an apple specialist should look at and consider.
Does this happen with the headphone jack out? when you hold your finger over the headphone jack area does a red beam come out of it *blinking* or just on? This will be a good indicator that your audio hardware is faulty. are you running HDMI out?

Does anyone know about a hard drive being corrupted by travelling from a Mac to a PC then back again?

Ok, so I wrote a bunch of data to a Seagate ST2000DL003 3.5 inch 2TB Hard Drive - mac formatted - then put it into a PC and it couldn't read the drive. But when I plugged the drive back into the mac pro the drive was unreadable/corrupt. Does anyone know what's happened and is this data recoverable?

Use Disk Utility "Repair Disk" and see what it says. It may be trivial and easily fixable.

Footage from FCP into AE then back again...something's afoot

Hey all,
I have a 5 second clip that needs the attention of After Effects. A small area of my footage needs a paint job, and I've successfully brought the small area of my timeline out of FCP and have started a new composition in After Effects.
I've done the paint job and mission accomplished.
The problem:
I can't get the footage back into Final Cut with the correct aspect ratio. The footage is, in FCP, HDV footage, 1440 x 1080 at 16:9 PAR. It looks great in After Effects, as AE is sizing the movie correctly. But my understanding is that I need to set my composition PAR settings to 1.33 aspect ratio in order to maintain the correct proportion. The PAR dropdown in Composition settings does not give this option. I've also tried 1920 x 1080 with Square Pixels and that doesn't work either.
Can anyone advise me on how I get footage back out of AE without changing the PAR, or perhaps allowing me to choose 1.33 in my Composition settings?
HUGE HELP!
Thank you,
G man

Here's the fix for anyone interested:
http://www.dvinfo.net/conf/archive/index.php/t-43362.html

Move library to laptop and then back again. . .

Hey. I need to spend some time organizing my IPhoto Library and will be travelling extensively in the next month so I would like to do the work on a Macbook Pro. The current library (12,000 photos) is on our IMac. I want to organize, keyword, event, etc. . .really clean it up, tag everything,etc but not sure how to go about this without losing my mods.
Can I simply:
Copy the IPhoto Library folder to my Macbook.
Work on the photos while I travel
Copy the Iphoto Library folder from my Macbook back to the IMac?
Any other thoughts?
Thanks
Adam

Adam
Yes this will work - but you may have file permission issue so Download BatchMod from
http://macchampion.com/arbysoft/
And apply it to the iPhoto Library Folder using the settings found here:
http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
(Credit to Old Toad for this one).
Regards
TD

Moving iphone/itunes to another computer and then back again

I'm on travel and want to add more podcasts to my 1st generation iPhone which is nearly full. I have a backup at home so I thought I would just reformat and then link to my Macbook Air while on travel overseas. However, iTunes said that I had to have a network connection which is a problem since I have an ethernet connection and the iPhone doesn't like the simple USB hub that I have. I suppose I can figure this out but my question is: when I return home can I restore with a backup on my home computer so I don't have to re-install a bunch of apps?
BTW, it's rather strange that I can't reformat an iPhone without being connected online. This is trivial to do on an iPod.
Thanks

All media content will be erased when you sync to a different computer. You can transfer your purchases and backup manually before you sync. To do this, disable autosync in itunes, connect the phone and right click on it in the device list. Choose "Backup" and "Transfer purchases"
After your phone got erased, restore from that backup. See what the backup contains here: http://support.apple.com/kb/HT1766
Music is not part of the backup, but if you bought it in the Store, you where able to transfer it from the phone to the computer when you transferred your purchases.

Turn process cyan into Pantone purple, then back again?

I'm designing a document that uses black and process cyan. When we go to press, the cyan will actually be our spot color. Yes, I know that is quirky, but that my printer's preferred procedure. So my question is this: I would like to temporarily subsitute all instances of cyan with Pantone Purple (our actual spot color) so I can view it on the screen. Is there a quick and easy way to do this?

This is really a bad workflow all around (though quite common, I think). If something is going to be spot color, it ought to be defined as spot color from the start to avoid confusion, and to make proofing easier. I think the "use one of the process plates" method comes old Quark users who had no ink manager ( I know I used this technique in my first position with a print shop -- though I can't honestly say why, that's just the way we did things).
The nice thing about the ID Ink Manager is it doesn't matter what the spot color definition happens to be, you can always alias it to someething else to make it look right on screen or in the proof, or convert it to process if you decide to change the print method.

How to convert apple tv's hdmi output to cat6 and back again

Hi,
I have just reovated my room and have wired in 2 x cat 6 cables from the place which i have my apple tv set up to a projector on my wall. I want to know which converter would be best and usuable to convert the hdmi output on apple tv to cat6 and then back again to hdmi to connect to my projector?
I have already bough some relitivly cheep hdmi to cat6 sender and recervers from ebay however i can only get sound to work (i.e. i can hear the sound when i press the apple tv remote) but there is no image. the projector i am usuing is a acer but will be changing this in a few weeks
Please help.
Regards
Shaun

Have a look at this, and possibly other items from this firm (though I have no experience of them):
http://www.keene.co.uk/electronic/cyp/puma-hdmi-over-single-cat6-hdbaset-kit/pu5 06.html

How do I fix login fail as it goes from flip-screen to white-screen then back to login page?

When I login to OS X 10.8.2 on my late 2009 iMac (8GB of RAM) with Parallels 8 running Win7 Full, the window flips over to my desktop background to commence the login process, then, flips back to a white screen and then back again to the login page. All of this happens at once in a total of 3-4 seconds. I have run the disk utility to fix permissions and verify the disk and all is well except, that the login problem continues and I am unable to login at all. Any ideas before a full wipe and restore?

- Have you tried resetting the iPod.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to computer and if it shows in iTunes restore.
- If screen is still on, let the battery fully drain. Then charge for an hour and try the reset and retore again.

Since downloading IOS8, when I log in to certain websites that are password specific and check the stay logged in box, when I return to the home screen then back to the website I have to log in again which is very frustrating

Since downloading IOS8 when I log in to certain websites that are password specific, despite checking the keep logged in box, when I go back to home screen then back to website, I have been logged out and have to log back in-very frustrating-any ideas please?

To see registered devices in My account:
1) Go to Account > My Account
2) Scroll down, and ensure that that you first have an active subscrption (if you do not, you are not logged in to you Ovi Music unlimited account)
3) Below Unlimited downloads subscription box, you should have a Registered devices box.
Cheers,
elin
http://www.nokia.com/support
Attachments:
Music account.jpg ‏13 KB
registered devices.jpg ‏49 KB

I am trying to download the update to Photo Effects (Lite) v 3.0.0, for several weeks now without success. I press the update button and it goes away, then comes back again without any change. Can someone help please?

The update to Photo Effects (Lite) v 3.0.0 won't work. I've tried for several weeks without any result. I press the download button and it disappears, then reappears again. Can any one help, please?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Cineon LOG 2 LIN render then back again

Similar Messages

Maybe you are looking for