Cinnamon Desktop GVFS Timeout
I use the cinnamon desktop. I just did a system update, and now, I get a behavior where after I log in there is a delay before conky and the icons on the desktop appear.
There are messages in the journal the would appear to be relevant, but I don't quite understand what they mean.
org.gtk.vfs.Daemon[476]: ** (process:577): WARNING **
: send_done_cb: Timeout was reached (g-io-error-quark, 24)
cinnamon-session[468]: WARNING: Application 'cinnamon.desktop' failed to register before timeout
cinnamon-session[468]: CRITICAL: We failed, but the fail whale is dead. Sorry....
These messages only appear once per login.
So it seems this indicates that gvfs is timing out for some reason, but I don't know how to diagnose that any further. Any suggestions for how I could dig into this more?
Thanks,
Tom
Later that same day, a different thread was started on the same issue.
See:
https://bbs.archlinux.org/viewtopic.php?pid=1397165
Similar Messages
-
[SOLVED] Cinnamon Desktop Selection
Hi, I'm running Archlinux with the cinnamon desktop, does anyone know how to achieve the desktop dragging? (Dragging a selection box on the desktop)
I know it's possible as I've seen Manjaro do it, and Manjaro is based off of Archlinux. I'm going to assume it is a package, or maybe a config file. Any help would be appreciated. Thanks!
Last edited by Multimoon (2012-11-21 15:09:40)Thank you, I have used openbox for about four years now, so I never played with gnome that much, but the recent xorg update broke openbox's logout, so I switched to cinnamon. Overall happy with it, now that I have control over my desktop. Thanks again!
-
[Solved] Cinnamon desktop quirks
Hey, I installed the cinnamon desktop, but I can only see my usb drive under the root acount, not under the my user account. I've looked in the wiki, but nothing. I've got myself added to the groups, but nothing either.
I also can't seem to shutdown from within the menu.
Any help would be great, thanks.
Last edited by Winboy (2013-06-06 11:45:43)SolarBoyMatt wrote:Sounds like your logind session wasn't being preserved. Slim may have worked, but it didn't really "fix" the problem. It's probably an easy fix, but you seem content with slim.
Would you mind to elaborating more on preserving the logind session? -
I'm trying to get the Cinnamon Desktop working from the AUR.
https://aur.archlinux.org/packages.php? … 3&detail=1
I got to the point of running makepkg -s, when I hit a snag;
==> Retrieving Sources...
-> Found cinnamon.session
-> Found cinnamon.xsession
==> Validating source files with sha512sums...
cinnamon.session ... Passed
cinnamon.xsession ... Passed
==> Extracting Sources...
==> Starting build()...
==> Connecting to GIT server....
Cloning into 'Cinnamon'...
error: The requested URL returned error: 403 while accessing https://github.com/linuxmint/Cinnamon.git/info/refs
fatal: HTTP request failed
==> ERROR: A failure occurred in build().
Aborting...
Any way past this stumper?That link seems, for lack of a better word, broken. You can try again later or contact the maintainer:
# Maintainer: Xiao-Long Chen <[email protected]>
It looks like the PKGBUILD may need to be updated. Of course you could check out the git page and edit the PKGBUILD yourself if you're in a hurry. -
[SOLVED]How configure keyboard configuration to kill Cinnamon Desktop.
Hello I have installed Cinnamon desktop and i try enable ctrl+Alt+Backspace to kill it, passing terminate:ctrl_alt_bksp to XkbOptions.
https://wiki.archlinux.org/index.php/Ke … on_in_Xorg
This is my 10-keyboard.conf.
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "es"
Option "XkbModel" "pc104"
Option "XkbVariant" "deadtilde, dvorak"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
I try.... :
Section .....
Option "XkbOptions" "grp:alt_shift_toggle, terminate:ctrl_alt_bksp"
or ..
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
...but no result. Any idea to enable to enable Ctrl+Alt+Backspace.
Edit:
Finally i switched the displays manager gdm by sddm...and this config works perfectly:
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "es"
Option "XkbModel" "pc104"
Option "XkbVariant" "deadtilde, dvorak"
Option "XkbOptions" "grp:alt_shift_toggle, terminate:ctrl_alt_bksp"
EndSection
Thanks.
Last edited by colegui (2015-02-15 22:36:05)Sorry, I feel like I should have done some more googling but it only occured to me while writing this post that other universities use eduroam. With a quick google search I found a solution.I will redeam myself by posting my solution.
1. ip link set wlan0 up where wlan0 is your wireless interface you are trying to connect from.
2. Create/edit /etc/wpa_supplicant.conf to look like:
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="eduroam"
scan_ssid="eduroam"
proto=RSN
key_mgmt=WPA-EAP
pairwise=CCMP
group=CCMP
eap=PEAP
identity="abc1@university_name.ac.uk"
password="PASSWORD"
ca_cert="/usr/share/ca-certificates/mozilla/GlobalSign_Root_CA.crt"
phase2="auth=MSCHAPV2"
3. As root:
wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant.conf
4. then dhcpcd wlan0 again where wlan0 is the interface you are trying to connect from.
Last edited by tatskaari (2012-11-21 03:10:23) -
Chrome makes Cinnamon desktop frozen
I am facing a random issue with Chrome (google-chrome in AUR). This issue will makes Chrome and the whole Cinnamon desktop frozen. I cannot click anything except switching to other tty to reboot the computer. This issue happened randomly. The kernel message is following:
$ dmesg -T
[Mon Aug 11 13:04:24 2014] Watchdog[804]: segfault at 0 ip 00007f583b2a3dde sp 00007f582902e770 error 6 in chrome[7f583737d000+51d2000]
[Mon Aug 11 13:04:36 2014] Watchdog[19618]: segfault at 0 ip 00007f532bde1dde sp 00007f5319b6c770 error 6 in chrome[7f5327ebb000+51d2000]
[Mon Aug 11 13:04:49 2014] Watchdog[19726]: segfault at 0 ip 00007f64b7730dde sp 00007f64a54bb770 error 6 in chrome[7f64b380a000+51d2000]
Seem that it is cased by Chrome, should I report to Chrome team?
Chrome Version 36.0.1985.125
Last edited by mssun (2014-08-11 05:22:23)Same segfaults problem in Chromium, https://bbs.archlinux.org/viewtopic.php?id=184555
-
Hi,
I am having some issues with my application when using it through remote desktop. Essentially it works fine when I am controlling it 'locally' - but when I control it using remote desktop, at times the band width seems to cause the time critical vis to hang - essentially they can't keep up with the data coming through the FIFO from my FPGA application. I have tried my best to make the 'time critical' parts of the app be time critical - but they still seem to be over-ridden by remote desktop. Any thoughts on how to improve things - ie to force remote desktop to accept lower band width-or to enforce labview being more important? Or is it worth trying to monitor things through remote front panels - what is the overhead for this in terms of development - there are quite a few front panels in my application.Hi,
So Basically I have a 'Lab' computer which is connected directly to the FPGA. (It is one of the 'PCIe 7842R' series boards). It is running my Labview Application (in the development suite.). Essentially the issue is that when I'm remote desktopping in - from home\my office etc, the lab computer's interface with it seems to break(at least when the network is being slow).
I guess I would expect that when the network is slow the update rate would be slower - in terms of responsivity to the remote desktop - but i wouldn't expect it to actually cause the Lab computer to slow down. In some senses what i'm doing when i remote desktop in is monitoring a long running experiment - so i don't need to 'do' much - just check everything is fine. Obviously if me loggging in to check if it is running causes a breakdown - this isn't ideal.
I should say.... after messing around a little bit yesterday I have a suspicion that what is acutally causing the issue is 'queues' - basically i'm using single valued queues as a reference value to the data that is being aquired - so it can be used in several other analysis vis. I have a data aquisition VI that runs continuously getting data from the FIFO, analyses it, and then bungs the analysis object into the queue. The other vis preview the queue element- to get the data out. It seems like the 'lossy' enqueue seems to be what causes it to break - ie - when i remote desktop in the enqueue become jittery - and sometimes hangs for 100-200ms - rather than usually ~1-2ms. - which then causes the FIFO to timeout.
I'm considering re-engineering things - possibly to use datavalue references or something like this - since i've read they are slightly faster - although i'm hesitant since the queue solution seems a nice way of easily passing the data to another vi - only needing to know the queue name. I guess I am currently using a modified version of the Queued state machine template I got from the community forum - from a few years ago. I noticed that the newer version of LV has a similiar template - but I haven't checked out the details.
Do you have any thoughts on this?
JP -
I own an iPod, iPhone 4 and iPhone4s. My iTunes account with my music library (copied from CD's) is stored on my Windows desktop computer. Recently, I used my Windows laptop computer to access my iTunes account and purchase some music which was downloaded to the laptop computer. I then synced the iPod and the iPhone 4 to the laptop and was able to add the purchased music to these two devices.
Yesterday I bought the iPhone 4s. I want to copy all the music library found in my iTunes account stored on the desktop computer to the new iPhone 4s. When I tried to sync the iPhone 4s to my desktop iTunes account the device "times out". How do I get my music library that is on the desktop copied to the new iPhone 4s?
Any advice would be appreciated.What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs? -
[SOLVED] How change language in Cinnamon Desktop Environment
Hi,
I wanted to change the language of cinnamon but I do not see any option to change the language. I have installed cinnamon-translations.
Thanks for all help
Last edited by formoza (2014-08-01 20:00:31)Things changed recently with the introduction of the "mintlocale" package in Linux Mint, which now handles this in Cinnamon.
For now, to add new locales you need to still use the /etc/locale.gen and locale-gen way of adding them.
To change language used, you need the mintlocale package installed. -
HP LaserJet P1102W - no print output in Linux Mint 17.1 Cinnamon Desktop
I've just done a default install of Linux Mint 17.1 - as feared, no print output.
I'm guessing I need to install a driver - but I couldn't find anything easily on HP site, only Windows/Mac OS stuff. Are HP printers generally linux friendly? Where can I download drivers if they are? More over, I'm a total linux newbie, so any drivers need to be easily installed! I'm not currently familiar with Terminal windows and line commands!
My printer does have wireless enabled, but I have it connected via direct USB also.
Linux Mint did offer to run a diagnostic tool/debugging tool which gave a great deal of what means nothing to me. Debug output is below if it is helpful, but hoping a simple driver install will cure all ...
Debug Output:
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Is local server publishing?):
{'local_server_exporting_printers': False}
Page 3 (Choose printer):
{'cups_dest': <cups.Dest HP-LaserJet-Professional-P-1102w (default)>,
'cups_instance': None,
'cups_queue': u'HP-LaserJet-Professional-P-1102w',
'cups_queue_listed': True}
Page 4 (Check printer sanity):
{'cups_device_uri_scheme': u'hp',
'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'printer-info': u'Hewlett-Packard HP LaserJet Professional P 1102w',
'printer-is-shared': True,
'printer-location': u'Leela',
'printer-make-and-model': u'HP LaserJet Professional P 1102w, hpcups 3.14.3, requires proprietary plugin',
'printer-state': 3,
'printer-state-message': u'',
'printer-state-reasons': [u'none'],
'printer-type': 167948,
'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-Professional-P-1102w'},
'cups_printer_remote': False,
'hplip_output': (['',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mDevice Information Utility ver. 5.2\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mSystem Tray Status Service ver. 2.0\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mhp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a\x1b[0m',
'\x1b[01mDevice Parameters (dynamic data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' agent1-ack False ',
' agent1-desc Black toner cartridge ',
' agent1-dvc 0 ',
' agent1-health 0 ',
' agent1-health-desc Good/OK ',
' agent1-hp-ink False ',
' agent1-id 0 ',
' agent1-kind 4 ',
' agent1-known False ',
' agent1-level 100 ',
' agent1-level-trigger 0 ',
' agent1-sku 85A ',
' agent1-type 1 ',
' agent1-virgin False ',
' back-end hp ',
" cups-printers ['HP-LaserJet-Professional-P-1102w'] ",
' cups-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' dev-file ',
' device-state 1 ',
' device-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' deviceid MFG:Hewlett-Packard;MDL: LaserJet Professional P ',
' 1102w;CMD:ZJSJS,URF,PCLm,PJL,ACL,HTTCLSLSRINTER;DEHPHP ',
' LaserJet Presessional P 110;F;FWVER:20110826; ',
' duplexer 0 ',
' error-state 0 ',
' host ',
' in-tray1 1 ',
' in-tray2 1 ',
' is-hp True ',
' media-path 1 ',
' panel 0 ',
' panel-line1 ',
' panel-line2 ',
' photo-tray 0 ',
' port 1 ',
' r 0 ',
' revision 254 ',
' rg 000 ',
' rr 000000 ',
' rs 000000000 ',
' serial 000000000W4037X5PR1a ',
' status-code 1000 ',
' status-desc Idle ',
' supply-door 1 ',
' top-door 1 ',
'\x1b[01m',
'Model Parameters (static data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' align-type 0 ',
' clean-type 0 ',
' color-cal-type 0 ',
' copy-type 0 ',
' embedded-server-type 0 ',
' fax-type 0 ',
' fw-download False ',
' icon HP_LaserJet_1012.png ',
' io-mfp-mode 6 ',
' io-mode 1 ',
' io-support 10 ',
' job-storage 0 ',
' linefeed-cal-type 0 ',
' model HP_LaserJet_Professional_P_1102w ',
' model-ui HP LaserJet Professional P 1102w ',
' model1 HP LaserJet Professional P 1102w Printer ',
' monitor-type 0 ',
' panel-check-type 0 ',
' pcard-type 0 ',
' plugin 1 ',
' plugin-reason 1 ',
' power-settings 0 ',
' pq-diag-type 0 ',
' r-type 0 ',
' r0-agent1-kind 4 ',
' r0-agent1-sku 85A ',
' r0-agent1-type 1 ',
' scan-src 0 ',
' scan-type 0 ',
' status-battery-check 0 ',
' status-dynamic-counters 0 ',
' status-type 8 ',
' support-released True ',
' support-subtype 2202411 ',
' support-type 2 ',
' support-ver 3.12.6 ',
" tech-class ['LJZjsMono'] ",
" tech-subclass ['NoAutoDuplex'] ",
' tech-type 3 ',
' usb-pid 4138 ',
' usb-vid 1008 ',
' wifi-config 3 ',
'Done.',
['\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m',
'\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-systray requires Qt4 GUI and DBus support. Exiting.\x1b[0m',
'\x1b[35;01mwarning: Unable to connect to dbus. Is hp-systray running?\x1b[0m',
0),
'is_cups_class': False,
'local_cups_queue_attributes': {'charset-configured': u'utf-8',
'charset-supported': [u'us-ascii', u'utf-8'],
'color-supported': True,
'compression-supported': [u'none', u'gzip'],
'copies-default': 1,
'copies-supported': (1, 9999),
'cups-version': u'1.7.2',
'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'document-format-default': u'application/octet-stream',
'document-format-supported': [u'application/octet-stream',
u'application/pdf',
u'application/postscript',
u'application/vnd.adobe-reader-postscript',
u'application/vnd.cups-pdf',
u'application/vnd.cups-pdf-banner',
u'application/vnd.cups-postscript',
u'application/vnd.cups-raster',
u'application/vnd.cups-raw',
u'application/x-cshell',
u'application/x-csource',
u'application/x-perl',
u'application/x-shell',
u'image/gif',
u'image/jpeg',
u'image/png',
u'image/tiff',
u'image/urf',
u'image/x-bitmap',
u'image/x-photocd',
u'image/x-portable-anymap',
u'image/x-portable-bitmap',
u'image/x-portable-graymap',
u'image/x-portable-pixmap',
u'image/x-sgi-rgb',
u'image/x-sun-raster',
u'image/x-xbitmap',
u'image/x-xpixmap',
u'image/x-xwindowdump',
u'text/css',
u'text/html',
u'text/plain'],
'finishings-default': 3,
'finishings-supported': [3],
'generated-natural-language-supported': [u'en-us'],
'ipp-versions-supported': [u'1.0',
u'1.1',
u'2.0',
u'2.1'],
'ippget-event-life': 15,
'job-creation-attributes-supported': [u'copies',
u'finishings',
u'ipp-attribute-fidelity',
u'job-hold-until',
u'job-name',
u'job-priority',
u'job-sheets',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-hold-until-default': u'no-hold',
'job-hold-until-supported': [u'no-hold',
u'indefinite',
u'day-time',
u'evening',
u'night',
u'second-shift',
u'third-shift',
u'weekend'],
'job-ids-supported': True,
'job-k-limit': 0,
'job-k-octets-supported': (0, 476568600),
'job-page-limit': 0,
'job-priority-default': 50,
'job-priority-supported': [100],
'job-quota-period': 0,
'job-settable-attributes-supported': [u'copies',
u'finishings',
u'job-hold-until',
u'job-name',
u'job-priority',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-sheets-default': (u'none', u'none'),
'job-sheets-supported': [u'none',
u'classified',
u'confidential',
u'form',
u'secret',
u'standard',
u'topsecret',
u'unclassified'],
'jpeg-k-octets-supported': (0, 476568600),
'jpeg-x-dimension-supported': (0, 65535),
'jpeg-y-dimension-supported': (1, 65535),
'marker-change-time': 0,
'media-bottom-margin-supported': [423, 547],
'media-col-default': u'(unknown IPP value tag 0x34)',
'media-col-supported': [u'media-bottom-margin',
u'media-left-margin',
u'media-right-margin',
u'media-size',
u'media-source',
u'media-top-margin',
u'media-type'],
'media-default': u'iso_a4_210x297mm',
'media-left-margin-supported': [423, 635],
'media-right-margin-supported': [423, 635],
'media-size-supported': [u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)'],
'media-source-supported': [u'auto',
u'manual'],
'media-supported': [u'iso_a6_105x148mm',
u'iso_a5_148x210mm',
u'jpn_hagaki_100x148mm',
u'om_double-postcard_148.17x200.03mm',
u'om_jb5_182.12x257.05mm',
u'na_executive_7.25x10.5in',
u'om_16k195x270_195.09x269.88mm',
u'om_16k184x260_184.15x260mm',
u'oe_16k197x273_7.75x10.75in',
u'na_letter_8.5x11in',
u'iso_a4_210x297mm',
u'oe_flsa_8.5x13in',
u'na_legal_8.5x14in',
u'na_monarch_3.875x7.5in',
u'iso_dl_110x220mm',
u'na_number-10_4.125x9.5in',
u'iso_c5_162x229mm',
u'om_env-b5_176.04x250.12mm',
u'custom_min_3x5in',
u'custom_max_17x36in'],
'media-top-margin-supported': [423, 547],
'media-type-supported': [u'stationery'],
'multiple-document-handling-supported': [u'separate-documents-uncollated-copies',
u'separate-documents-collated-copies'],
'multiple-document-jobs-supported': True,
'multiple-operation-time-out': 300,
'natural-language-configured': u'en-us',
'notify-attributes-supported': [u'printer-state-change-time',
u'notify-lease-expiration-time',
u'notify-subscriber-user-name'],
'notify-events-default': [u'job-completed'],
'notify-events-supported': [u'job-completed',
u'job-config-changed',
u'job-created',
u'job-progress',
u'job-state-changed',
u'job-stopped',
u'printer-added',
u'printer-changed',
u'printer-config-changed',
u'printer-deleted',
u'printer-finishings-changed',
u'printer-media-changed',
u'printer-modified',
u'printer-restarted',
u'printer-shutdown',
u'printer-state-changed',
u'printer-stopped',
u'server-audit',
u'server-restarted',
u'server-started',
u'server-stopped'],
'notify-lease-duration-default': 86400,
'notify-lease-duration-supported': (0,
2147483647),
'notify-max-events-supported': [100],
'notify-pull-method-supported': [u'ippget'],
'notify-schemes-supported': [u'dbus',
u'mailto',
u'rss'],
'number-up-default': 1,
'number-up-supported': [1, 2, 4, 6, 9, 16],
'operations-supported': [2,
4,
5,
6,
8,
9,
10,
11,
12,
13,
14,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
34,
35,
37,
38,
56,
57,
59,
16385,
16386,
16387,
16388,
16389,
16390,
16391,
16392,
16393,
16394,
16395,
16396,
16397,
16398,
16399,
16423,
14],
'orientation-requested-default': None,
'orientation-requested-supported': [3,
4,
5,
6],
'output-bin-default': u'face-down',
'output-bin-supported': [u'face-down'],
'page-ranges-supported': True,
'pages-per-minute': 1,
'pages-per-minute-color': 1,
'pdf-k-octets-supported': (0, 476568600),
'pdf-versions-supported': [u'adobe-1.2',
u'adobe-1.3',
u'adobe-1.4',
u'adobe-1.5',
u'adobe-1.6',
u'adobe-1.7',
u'iso-19005-1_2005',
u'iso-32000-1_2008',
u'pwg-5102.3'],
'pdl-override-supported': [u'attempted'],
'port-monitor': u'none',
'port-monitor-supported': [u'none'],
'ppd-timestamp': u'*',
'print-color-mode-default': u'color',
'print-color-mode-supported': [u'monochrome',
u'color'],
'print-quality-default': 4,
'print-quality-supported': [3, 4],
'printer-commands': u'none',
'printer-current-time': u'(IPP_TAG_DATE)',
'printer-dns-sd-name': u'Hewlett-Packard HP LaserJet Professional P 1102w @ Leela',
'printer-error-policy': u'retry-job',
Hi @durandal,
I read your post and see that you need the drivers for the P1102w printer. I can provide the website for you.
Here is the link for the HP Linux Imaging and Printing website. HP Linux imaging and printing.
Here is the link for the P1102w drivers. HP LaserJet Professional p1102w Printer.
If you need more information, please post your questions at the Linux Distribution Forums.
If you appreciate my efforts, please click the Thumbs up button below.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
Cinnamon Desktop Sound Settings Window Sizing Issue
This is not a big issue, but it should also be an easy fix.
I've noticed for months that when I enter the sound menu from the Sound Settings option on the panel the Sound Settings window is not quite wide enough and so a scroll bar appears at the bottom of the window. This blocks some of the balance, fade, and subwoofer slider area. If I enter the sound settings from the Control Panel, the window scales appropriately.
If anyone knows a more appropriate place to post this bug report, please let me know.Your symptoms sound similar to the subject of this document, concerning "Terminal.app" requiring Apple's Monaco font to be enabled:
http://docs.info.apple.com/article.html?artnum=25730 -
[Cinnamon] Issues after update to Cinnamon 2.2 and GTK 3.12
EDIT: Reported here: https://bugs.archlinux.org/task/39874
Please up-vote if you are affected.
===================
Original post.
Just done the following upgrade.
[2014-04-14 21:37] [PACMAN] Running 'pacman -Syyu'
[2014-04-14 21:37] [PACMAN] synchronizing package lists
[2014-04-14 21:38] [PACMAN] starting full system upgrade
[2014-04-14 21:44] [PACMAN] upgraded glib2 (2.38.2-1 -> 2.40.0-1)
[2014-04-14 21:44] [PACMAN] upgraded at-spi2-core (2.10.2-1 -> 2.12.0-1)
[2014-04-14 21:44] [PACMAN] upgraded atk (2.10.0-1 -> 2.12.0-1)
[2014-04-14 21:44] [PACMAN] upgraded at-spi2-atk (2.10.2-1 -> 2.12.0-1)
[2014-04-14 21:44] [PACMAN] upgraded gdk-pixbuf2 (2.30.6-1 -> 2.30.7-1)
[2014-04-14 21:44] [PACMAN] upgraded gtk-update-icon-cache (2.24.22-1 -> 2.24.23-1)
[2014-04-14 21:44] [PACMAN] upgraded pango (1.36.3-1 -> 1.36.3-2)
[2014-04-14 21:44] [PACMAN] upgraded gtk3 (3.10.7-1 -> 3.12.1-1)
[2014-04-14 21:44] [PACMAN] upgraded gmime (2.6.18-1 -> 2.6.20-1)
[2014-04-14 21:44] [PACMAN] upgraded gsettings-desktop-schemas (3.10.1-1 -> 3.12.0-1)
[2014-04-14 21:44] [PACMAN] upgraded glib-networking (2.38.2-1 -> 2.40.1-1)
[2014-04-14 21:44] [PACMAN] upgraded libsoup (2.44.2-1 -> 2.46.0-1)
[2014-04-14 21:44] [PACMAN] upgraded totem-plparser (3.10.1-1 -> 3.10.2-1)
[2014-04-14 21:44] [PACMAN] upgraded dconf (0.18.0-1 -> 0.20.0-1)
[2014-04-14 21:44] [PACMAN] upgraded libtracker-sparql (0.16.4-1 -> 1.0.0-2)
[2014-04-14 21:44] [PACMAN] upgraded libsecret (0.16-2 -> 0.18-1)
[2014-04-14 21:44] [PACMAN] upgraded gvfs (1.18.3-3 -> 1.20.1-2)
[2014-04-14 21:44] [PACMAN] upgraded brasero (3.10.0-1 -> 3.11.3-1)
[2014-04-14 21:44] [PACMAN] upgraded cinnamon-desktop (2.0.4-1 -> 2.2.0-1)
[2014-04-14 21:44] [PACMAN] installed js17 (17.0.0-1)
[2014-04-14 21:44] [PACMAN] upgraded polkit (0.112-1 -> 0.112-2)
[2014-04-14 21:44] [PACMAN] upgraded libplist (1.10-1 -> 1.11-1)
[2014-04-14 21:44] [PACMAN] installed libusbmuxd (1.0.9-1)
[2014-04-14 21:44] [PACMAN] upgraded libimobiledevice (1.1.5-2 -> 1.1.6-1)
[2014-04-14 21:44] [PACMAN] upgraded upower (0.9.23-2 -> 0.99.0-2)
[2014-04-14 21:44] [PACMAN] upgraded cinnamon-settings-daemon (2.0.8-4 -> 2.0.8-6)
[2014-04-14 21:44] [PACMAN] upgraded cinnamon-session (2.0.6-2 -> 2.2.0-1)
[2014-04-14 21:44] [PACMAN] upgraded cinnamon-translations (2.0.3-1 -> 2.2.0-1)
[2014-04-14 21:44] [PACMAN] upgraded gobject-introspection (1.38.0-1 -> 1.40.0-1)
[2014-04-14 21:44] [PACMAN] upgraded cjs (2.0.0-1 -> 2.2.0-1)
[2014-04-14 21:44] [PACMAN] upgraded cogl (1.16.2-1 -> 1.18.0-1)
[2014-04-14 21:44] [PACMAN] upgraded json-glib (0.16.2-1 -> 1.0.0-1)
[2014-04-14 21:44] [PACMAN] installed libinput (0.1.0-1)
[2014-04-14 21:44] [PACMAN] upgraded clutter (1.16.4-3 -> 1.18.0-1)
[2014-04-14 21:44] [PACMAN] upgraded clutter-gtk (1.4.4-4 -> 1.5.2-1)
[2014-04-14 21:44] [PACMAN] upgraded gnome-icon-theme-symbolic (3.10.1-1 -> 3.12.0-1)
[2014-04-14 21:44] [PACMAN] upgraded gnome-icon-theme (3.10.0-1 -> 3.12.0-1)
[2014-04-14 21:44] [PACMAN] upgraded gnome-themes-standard (3.10.0-1 -> 3.12.0-1)
[2014-04-14 21:44] [PACMAN] upgraded libgnome-keyring (3.10.1-2 -> 3.12.0-1)
[2014-04-14 21:44] [PACMAN] upgraded muffin (2.0.5-2 -> 2.2.0-1)
[2014-04-14 21:45] [PACMAN] upgraded webkitgtk (2.2.5-2 -> 2.4.0-1)
[2014-04-14 21:45] [PACMAN] upgraded cinnamon-screensaver (2.0.3-4 -> 2.2.0-1)
[2014-04-14 21:45] [PACMAN] installed cinnamon-menus (2.2.0-1)
[2014-04-14 21:45] [PACMAN] upgraded nemo (2.0.8-3 -> 2.2.0-1)
[2014-04-14 21:45] [PACMAN] upgraded cinnamon (2.0.14-3 -> 2.2.1-1)
[2014-04-14 21:45] [PACMAN] upgraded rest (0.7.90-2 -> 0.7.91-1)
[2014-04-14 21:45] [PACMAN] upgraded telepathy-glib (0.22.1-1 -> 0.24.0-1)
[2014-04-14 21:45] [PACMAN] upgraded gcr (3.10.1-3 -> 3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded gnome-online-accounts (3.10.2-1 -> 3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded libgweather (3.10.2-1 -> 3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded libgdata (0.14.1-1 -> 0.15.0-1)
[2014-04-14 21:45] [PACMAN] upgraded evolution-data-server (3.10.4-1 -> 3.12.1-1)
[2014-04-14 21:45] [PACMAN] upgraded fontsproto (2.1.2-1 -> 2.1.3-1)
[2014-04-14 21:45] [PACMAN] upgraded glibmm (2.38.1-1 -> 2.40.0-1)
[2014-04-14 21:45] [PACMAN] upgraded gnome-common (3.10.0-1 -> 3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded gnome-desktop (1:3.10.2-1 -> 1:3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded gtk2 (2.24.22-1 -> 2.24.23-1)
[2014-04-14 21:45] [PACMAN] upgraded gtkmm3 (3.10.1-1 -> 3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded gucharmap (3.10.1-1 -> 3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded js (17.0.0-1 -> 24.2.0-1)
[2014-04-14 21:45] [PACMAN] upgraded libgee (0.12.0-1 -> 0.14.0-1)
[2014-04-14 21:45] [PACMAN] upgraded libgpod (0.8.3-1 -> 0.8.3-2)
[2014-04-14 21:45] [PACMAN] upgraded pygobject-devel (3.10.2-2 -> 3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded python2-gobject (3.10.2-2 -> 3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded python2-atspi (2.10.0-2 -> 2.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded seahorse (3.10.2-1 -> 3.12.0-2)
[2014-04-14 21:45] [PACMAN] upgraded usbmuxd (1.0.8-2 -> 1.0.9-1)
[2014-04-14 21:45] [PACMAN] upgraded vala (0.22.1-1 -> 0.24.0-1)
[2014-04-14 21:45] [PACMAN] upgraded vte-common (0.34.9-1 -> 0.36.0-1)
[2014-04-14 21:45] [PACMAN] upgraded webkitgtk2 (2.2.5-2 -> 2.4.0-1)
[2014-04-14 21:45] [PACMAN] upgraded yelp-xsl (3.10.1-1 -> 3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded yelp (3.10.2-1 -> 3.12.0-1)
[2014-04-14 21:45] [PACMAN] upgraded yelp-tools (3.10.0-1 -> 3.12.0-1)
Now I have load of issues:
1) None of the GTK, Font or Icon themes are being applied in Cinnamon settings. My suspicion is they are being overridden by the GNOME 3.12 settings because it looks like the GNOME default themes, font and icon sets (most definitely the Cantarell font (GNOME default) is being applied, because I have the Segoe set in Cinnamon, but Cantarell is being used).
2) Media keys no longer work with applications like Banshee or VLC. The media keys do work in MATE.
3) Going to "Settings" > "Keyboard" doesn't work, and now I'm stuck with using a US keyboard layout, when I had it set to use the English (GB) layout before the upgrade. EDIT: Even changing this in dconf-editor doesn't work. It seems that this is controlled by GNOME as well (this is conjecture).
4) Settings (like default terminal, text editor) have been completely written over. Further, I have set the default terminal in Cinnamon to be terminator, but the Crtl + Alt + T key combination is not loading it (I suspect trying to load gnome-terminal, which I don't have installed). However, it seems like the other Default Applications (Music Player, Text Editor, Video Player, Browser) have been preserved.
Does anyone else have these issues?
Last edited by clfarron4 (2014-04-15 12:43:58)WolleTD wrote:
Confirming major problems. I just realized another issue: upower seems to not detect my battery:
[wolle ~]$ sudo upower -i /org/freedesktop/UPower/devices/battery_BATO
native-path: (null)
power supply: no
updated: Do 01 Jan 1970 01:00:00 CET (1397561195 seconds ago)
has history: no
has statistics: no
unknown
warning-level: unknown
icon-name: '(null)'
Currently, I am using sysfs and bc to calculate my battery charge. This is annoying.
Btw, I'm on testing...
i have this upower issue too:
claire ~ % sudo upower -i /org/freedesktop/UPower/devices/battery_BATO
[sudo] password for claire:
native-path: (null)
power supply: no
updated: Thu 01 Jan 1970 01:00:00 BST (1397564348 seconds ago)
has history: no
has statistics: no
unknown
warning-level: unknown
icon-name: '(null)'
leoluk wrote:Would it make sense to open a bug report for this? (can confirm the upower issue, by the way)
Yupyup, I think it's time. -
[SOLVED] Cinnamon appearance settings not working.
I have a strange problem concerning Cinnamon 2.2.0-1 from [community-testing], in which some appearance settings simply do not work. Specifically, I can't change icons or gtk theme, and making any change in cinnamon-settings has no effect whatsoever on the system. I've tried changing the appearance with lxappearance to some success - now the panel and some Gnome3 applications show the selected theme and icons, but the rest of the applications keep the old appearance settings. I have no .gtkrc files in my home folder and I start Cinnamon from LightDM.
This is the output from running cinnamon-settings from a terminal:
arachnid92 %> cinnamon-settings [~]
** (cinnamon-settings.py:3156): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
libupower-glib.so.1: cannot open shared object file: No such file or directory
Failed to load module: /usr/lib/cinnamon-control-center-1/panels/libpower.so
Could not find bluetooth module; is the cinnamon-control-center package installed?
Could not find wacom module; is the cinnamon-control-center package installed?
__init__ took 131.978 ms
pacman -Q | grep cinnamon:
arachnid92 %> pacman -Q | grep cinnamon [~]
cinnamon 2.2.0-1
cinnamon-control-center 2.0.9-1
cinnamon-desktop 2.2.0-1
cinnamon-menus 2.2.0-1
cinnamon-screensaver 2.0.3-4
cinnamon-session 2.2.0-1
cinnamon-settings-daemon 2.0.8-6
cinnamon-translations 2.0.3-1
Last edited by Arachnid92 (2014-04-18 17:27:58)Confirming @Arachnid92's problem.
I've got a whole raft of problems with the latest update, which I've listed here.
EDIT: I'm going to wait until these two are updated before I start reporting bugs, purely because it may just be that not all the updates have been pushed at the same time.
Last edited by clfarron4 (2014-04-14 22:38:40) -
Hi
I have just installed arch and i want to use cinnamon desktop.
I installed gdm , cinnamon , xorg-xinit , xorg-server and similar packages from AUR.
I also installed xf86-video-intel and xf86-video-ati for my switchable inel and radeon cards.
But , when i start cinnamon from gdm , it says " Oops an error occured " and i can't recover.
I can use cinnamon(software rendering) without any problem.
"lspci | grep VGA" gives
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Thames [Radeon HD 7500M/7600M Series] (rev ff)
/var/log/Xorg.0.log after running startx gives
[ 448.124]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 448.124] X Protocol Version 11, Revision 0
[ 448.125] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 448.125] Current Operating System: Linux arch 3.14.6-1-ARCH #1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014 x86_64
[ 448.125] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8cbb4fa5-9f1a-45d6-9faf-d2ee5840a2cb rw quiet
[ 448.125] Build Date: 14 April 2014 08:39:09AM
[ 448.125]
[ 448.125] Current version of pixman: 0.32.4
[ 448.125] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 448.125] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 448.126] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 14 23:07:52 2014
[ 448.126] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 448.126] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 448.126] (==) No Layout section. Using the first Screen section.
[ 448.126] (==) No screen section available. Using defaults.
[ 448.126] (**) |-->Screen "Default Screen Section" (0)
[ 448.126] (**) | |-->Monitor "<default monitor>"
[ 448.126] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 448.126] (**) | |-->Device "Radeon"
[ 448.126] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 448.126] (==) Automatically adding devices
[ 448.126] (==) Automatically enabling devices
[ 448.126] (==) Automatically adding GPU devices
[ 448.126] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 448.126] Entry deleted from font path.
[ 448.126] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 448.126] Entry deleted from font path.
[ 448.126] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 448.126] Entry deleted from font path.
[ 448.126] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 448.126] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 448.126] Entry deleted from font path.
[ 448.126] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 448.126] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 448.126] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 448.126] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 448.127] (II) Loader magic: 0x804c80
[ 448.127] (II) Module ABI versions:
[ 448.127] X.Org ANSI C Emulation: 0.4
[ 448.127] X.Org Video Driver: 15.0
[ 448.127] X.Org XInput driver : 20.0
[ 448.127] X.Org Server Extension : 8.0
[ 448.127] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 448.930] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 448.933] (--) PCI:*(0:0:2:0) 8086:0166:103c:183e rev 9, Mem @ 0xc3000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64
[ 448.933] (--) PCI: (0:1:0:0) 1002:6840:103c:183e rev 0, Mem @ 0xa0000000/268435456, 0xc2000000/131072, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[ 448.933] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 448.933] Initializing built-in extension Generic Event Extension
[ 448.934] Initializing built-in extension SHAPE
[ 448.936] Initializing built-in extension MIT-SHM
[ 448.938] Initializing built-in extension XInputExtension
[ 448.939] Initializing built-in extension XTEST
[ 448.941] Initializing built-in extension BIG-REQUESTS
[ 448.942] Initializing built-in extension SYNC
[ 448.944] Initializing built-in extension XKEYBOARD
[ 448.945] Initializing built-in extension XC-MISC
[ 448.947] Initializing built-in extension SECURITY
[ 448.948] Initializing built-in extension XINERAMA
[ 448.949] Initializing built-in extension XFIXES
[ 448.951] Initializing built-in extension RENDER
[ 448.952] Initializing built-in extension RANDR
[ 448.953] Initializing built-in extension COMPOSITE
[ 448.954] Initializing built-in extension DAMAGE
[ 448.956] Initializing built-in extension MIT-SCREEN-SAVER
[ 448.957] Initializing built-in extension DOUBLE-BUFFER
[ 448.958] Initializing built-in extension RECORD
[ 448.959] Initializing built-in extension DPMS
[ 448.960] Initializing built-in extension Present
[ 448.961] Initializing built-in extension DRI3
[ 448.962] Initializing built-in extension X-Resource
[ 448.963] Initializing built-in extension XVideo
[ 448.964] Initializing built-in extension XVideo-MotionCompensation
[ 448.965] Initializing built-in extension XFree86-VidModeExtension
[ 448.966] Initializing built-in extension XFree86-DGA
[ 448.967] Initializing built-in extension XFree86-DRI
[ 448.968] Initializing built-in extension DRI2
[ 448.968] (II) "glx" will be loaded by default.
[ 448.968] (II) LoadModule: "dri2"
[ 448.968] (II) Module "dri2" already built-in
[ 448.968] (II) LoadModule: "glamoregl"
[ 448.968] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 448.970] (II) Module glamoregl: vendor="X.Org Foundation"
[ 448.970] compiled for 1.15.0, module version = 0.6.0
[ 448.970] ABI class: X.Org ANSI C Emulation, version 0.4
[ 448.970] (II) LoadModule: "glx"
[ 448.970] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 448.970] (II) Module glx: vendor="X.Org Foundation"
[ 448.970] compiled for 1.15.1, module version = 1.0.0
[ 448.970] ABI class: X.Org Server Extension, version 8.0
[ 448.970] (==) AIGLX enabled
[ 448.971] Loading extension GLX
[ 448.971] (II) LoadModule: "radeon"
[ 448.971] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 448.972] (II) Module radeon: vendor="X.Org Foundation"
[ 448.972] compiled for 1.15.0, module version = 7.3.0
[ 448.972] Module class: X.Org Video Driver
[ 448.972] ABI class: X.Org Video Driver, version 15.0
[ 448.972] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII
[ 448.978] (++) using VT number 2
[ 448.978] (II) [KMS] Kernel modesetting enabled.
[ 448.978] (EE) No devices detected.
[ 448.978] (EE)
Fatal server error:
[ 448.978] (EE) no screens found(EE)
[ 448.978] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 448.978] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 448.978] (EE)
The above log file occurs when I create 20-radeon.conf as per the wiki( https://wiki.archlinux.org/index.php/ATI#Configuration)
However if i remove this 20-radeon.conf file , and run startx , the x server starts but crashes immediately.
Please look into this matter , whether i continue on arch or settle back on ubuntu depends on this
Thanks in advanceYou're using a laptop with hybrid graphics, correct? If so, you may want to check the wiki articles on hybrid graphics and PRIME. PRIME allows you to use hybrid graphics properly, and the hybrid graphics article has some important notes on ATI cards. You can also check out the bumblebee branch that supports ATI, but good luck, it doesn't seem to be having much success.
If you can't get the open source drivers to work, you can try the proprietary drivers.
Last edited by Ekkoria (2014-06-14 15:33:55) -
Cinnamon 2.0.2-1 does not start. [SOLVED: See github for solution].
Hi,
So I've just upgraded the cinnamon package to 2.0.2-1 and it fails to load 3D mode, crashes, loads in Software Rendering mode and asks me if I want to restart Cinnamon. If I restart Cinnamon, the same happens. Does this happen to anyone else?
Here are the journalctl logs (with C style comments):
-- Reboot -- /*(User Note: Running package cinnamon 2.0.2-1)*/
Oct 10 10:48:17 claire systemd[370]: Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
Oct 10 10:48:17 claire systemd[370]: Mounted /sys/kernel/config.
Oct 10 10:48:17 claire systemd[370]: Stopped target Sound Card.
Oct 10 10:48:17 claire systemd[370]: Starting Default.
Oct 10 10:48:17 claire systemd[370]: Reached target Default.
Oct 10 10:48:17 claire systemd[370]: Startup finished in 186ms.
Oct 10 10:48:20 claire pulseaudio[402]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez
Oct 10 10:48:22 claire pulseaudio[444]: [pulseaudio] pid.c: Daemon already running.
Oct 10 10:48:46 claire cinnamon-session[376]: WARNING: Application 'cinnamon.desktop' killed by signal 15
Oct 10 10:48:49 claire cinnamon-session[376]: WARNING: App 'cinnamon.desktop' respawning too quickly /*Restarted Cinnamon after this*/
Oct 10 10:48:49 claire cinnamon-session[376]: CRITICAL: We failed, but the fail whale is dead. Sorry....
Oct 10 10:48:58 claire cinnamon-session[376]: WARNING: App 'cinnamon.desktop' respawning too quickly /*Restarted Cinnamon after this*/
Oct 10 10:49:00 claire cinnamon-session[376]: WARNING: App 'cinnamon.desktop' respawning too quickly
Oct 10 10:52:10 claire systemd[370]: Stopping Default.
Oct 10 10:52:10 claire systemd[370]: Stopped target Default.
Oct 10 10:52:10 claire systemd[370]: Starting Shutdown.
Oct 10 10:52:10 claire systemd[370]: Reached target Shutdown.
Oct 10 10:52:10 claire systemd[370]: Starting Exit the Session...
-- Reboot -- /*(User Note: Running package cinnamon 1.9.2-2)*/
Oct 10 10:53:03 claire systemd[370]: Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
Oct 10 10:53:03 claire systemd[370]: Mounted /sys/kernel/config.
Oct 10 10:53:03 claire systemd[370]: Stopped target Sound Card.
Oct 10 10:53:03 claire systemd[370]: Starting Default.
Oct 10 10:53:03 claire systemd[370]: Reached target Default.
Oct 10 10:53:03 claire systemd[370]: Startup finished in 76ms.
Oct 10 10:53:06 claire pulseaudio[402]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez
Oct 10 10:53:08 claire pulseaudio[446]: [pulseaudio] pid.c: Daemon already running.
Oct 10 10:55:32 claire sudo[644]: pam_unix(sudo:auth): authentication failure; logname= uid=1000 euid=0 tty=/dev/pts/1 ruser=andes rhost= user=andes
Oct 10 10:58:50 claire cinnamon-session[376]: Gtk-WARNING: Theme directory preferences/48 of theme Numix has no size field
Oct 10 10:58:53 claire systemd[370]: Stopping Default.
Oct 10 10:58:53 claire systemd[370]: Stopped target Default.
-- Reboot -- /*(User Note: Running package cinnamon 2.0.2-1 and X server 1.14.3-1)*/
Oct 10 10:59:48 claire systemd[372]: Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
Oct 10 10:59:48 claire systemd[372]: Mounted /sys/kernel/config.
Oct 10 10:59:48 claire systemd[372]: Stopped target Sound Card.
Oct 10 10:59:48 claire systemd[372]: Starting Default.
Oct 10 10:59:48 claire systemd[372]: Reached target Default.
Oct 10 10:59:48 claire systemd[372]: Startup finished in 98ms.
Oct 10 10:59:51 claire pulseaudio[404]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez
Oct 10 10:59:53 claire pulseaudio[449]: [pulseaudio] pid.c: Daemon already running.
Oct 10 11:00:15 claire cinnamon-session[378]: WARNING: Application 'cinnamon.desktop' killed by signal 15
Oct 10 11:00:17 claire cinnamon-session[378]: WARNING: App 'cinnamon.desktop' respawning too quickly
Oct 10 11:00:17 claire cinnamon-session[378]: CRITICAL: We failed, but the fail whale is dead. Sorry....
Oct 10 11:02:32 claire systemd[372]: Stopping Default.
Oct 10 11:02:32 claire systemd[372]: Stopped target Default.
Oct 10 11:02:32 claire systemd[372]: Starting Shutdown.
-- Reboot -- /*(Using updated X server and cinnamon 1.9.2-2)*/
Oct 10 11:03:40 claire systemd[371]: Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
Oct 10 11:03:40 claire systemd[371]: Mounted /sys/kernel/config.
Oct 10 11:03:40 claire systemd[371]: Stopped target Sound Card.
Oct 10 11:03:40 claire systemd[371]: Starting Default.
Oct 10 11:03:40 claire systemd[371]: Reached target Default.
Oct 10 11:03:40 claire systemd[371]: Startup finished in 87ms.
Oct 10 11:03:43 claire pulseaudio[403]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez
Oct 10 11:03:45 claire pulseaudio[444]: [pulseaudio] pid.c: Daemon already running.
And here is the x.Org log corresponding to the Oct 10 10:59:48 reboot (with Cinnamon 2.0.2-1), that is the second to last reboot:
[ 17.977]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 17.977] X Protocol Version 11, Revision 0
[ 17.977] Build Operating System: Linux 3.11.0-1-ARCH x86_64
[ 17.977] Current Operating System: Linux claire 3.11.4-1-ck #1 SMP PREEMPT Sat Oct 5 12:41:35 EDT 2013 x86_64
[ 17.977] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-ck root=UUID=39a70e8b-6be9-43f3-a70c-fdbf45c2cead rw quiet nomodeset elevator=bfq
[ 17.977] Build Date: 13 September 2013 01:28:59PM
[ 17.977]
[ 17.977] Current version of pixman: 0.30.2
[ 17.977] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17.977] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17.977] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 10 10:59:27 2013
[ 18.009] (==) Using config file: "/etc/X11/xorg.conf"
[ 18.009] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 18.062] (==) ServerLayout "aticonfig Layout"
[ 18.062] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 18.062] (**) | |-->Monitor "<default monitor>"
[ 18.062] (**) | |-->Device "aticonfig-Device[0]-0"
[ 18.062] (==) No monitor specified for screen "aticonfig-Screen[0]-0".
Using a default monitor configuration.
[ 18.062] (**) |-->Screen "amdcccle-Screen[0]-1" (1)
[ 18.062] (**) | |-->Monitor "<default monitor>"
[ 18.062] (**) | |-->Device "amdcccle-Device[0]-1"
[ 18.062] (==) No monitor specified for screen "amdcccle-Screen[0]-1".
Using a default monitor configuration.
[ 18.062] (==) Automatically adding devices
[ 18.062] (==) Automatically enabling devices
[ 18.062] (==) Automatically adding GPU devices
[ 18.149] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.149] Entry deleted from font path.
[ 18.149] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.150] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.150] Entry deleted from font path.
[ 18.150] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.150] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 18.150] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.150] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.150] (II) Loader magic: 0x7fdc20
[ 18.150] (II) Module ABI versions:
[ 18.150] X.Org ANSI C Emulation: 0.4
[ 18.150] X.Org Video Driver: 14.1
[ 18.150] X.Org XInput driver : 19.1
[ 18.150] X.Org Server Extension : 7.0
[ 18.152] (--) PCI:*(0:0:1:0) 1002:9649:103c:3566 rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/262144, I/O @ 0x00004000/256
[ 18.160] Initializing built-in extension Generic Event Extension
[ 18.160] Initializing built-in extension SHAPE
[ 18.160] Initializing built-in extension MIT-SHM
[ 18.160] Initializing built-in extension XInputExtension
[ 18.160] Initializing built-in extension XTEST
[ 18.160] Initializing built-in extension BIG-REQUESTS
[ 18.160] Initializing built-in extension SYNC
[ 18.160] Initializing built-in extension XKEYBOARD
[ 18.160] Initializing built-in extension XC-MISC
[ 18.160] Initializing built-in extension SECURITY
[ 18.160] Initializing built-in extension XINERAMA
[ 18.160] Initializing built-in extension XFIXES
[ 18.160] Initializing built-in extension RENDER
[ 18.160] Initializing built-in extension RANDR
[ 18.160] Initializing built-in extension COMPOSITE
[ 18.160] Initializing built-in extension DAMAGE
[ 18.160] Initializing built-in extension MIT-SCREEN-SAVER
[ 18.160] Initializing built-in extension DOUBLE-BUFFER
[ 18.160] Initializing built-in extension RECORD
[ 18.160] Initializing built-in extension DPMS
[ 18.160] Initializing built-in extension X-Resource
[ 18.160] Initializing built-in extension XVideo
[ 18.160] Initializing built-in extension XVideo-MotionCompensation
[ 18.160] Initializing built-in extension XFree86-VidModeExtension
[ 18.160] Initializing built-in extension XFree86-DGA
[ 18.160] Initializing built-in extension XFree86-DRI
[ 18.160] Initializing built-in extension DRI2
[ 18.160] (II) "glx" will be loaded by default.
[ 18.160] (II) LoadModule: "glx"
[ 18.237] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.258] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 18.258] compiled for 6.9.0, module version = 1.0.0
[ 18.258] Loading extension GLX
[ 18.258] (II) LoadModule: "fglrx"
[ 18.259] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 18.485] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 18.485] compiled for 1.4.99.906, module version = 13.20.5
[ 18.485] Module class: X.Org Video Driver
[ 18.487] (II) Loading sub module "fglrxdrm"
[ 18.487] (II) LoadModule: "fglrxdrm"
[ 18.487] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 18.501] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 18.501] compiled for 1.4.99.906, module version = 13.20.5
[ 18.501] (II) AMD Proprietary Linux Driver Version Identifier:13.20.5
[ 18.501] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.20.11
[ 18.501] (II) AMD Proprietary Linux Driver Build Date: Sep 21 2013 02:26:09
[ 18.501] (++) using VT number 7
[ 18.518] (WW) Falling back to old probe method for fglrx
[ 18.582] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 18.594] ukiDynamicMajor: found major device number 250
[ 18.594] ukiDynamicMajor: found major device number 250
[ 18.594] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 18.594] ukiOpenDevice: node name is /dev/ati/card0
[ 18.594] ukiOpenDevice: open result is 9, (OK)
[ 19.069] ukiOpenByBusid: ukiOpenMinor returns 9
[ 19.069] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 19.084] ukiDynamicMajor: found major device number 250
[ 19.084] ukiDynamicMajor: found major device number 250
[ 19.084] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 19.084] ukiOpenDevice: node name is /dev/ati/card0
[ 19.084] ukiOpenDevice: open result is 9, (OK)
[ 19.084] ukiOpenByBusid: ukiOpenMinor returns 9
[ 19.084] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 19.103] (--) Chipset Supported AMD Graphics Processor (0x9649) found
[ 19.103] (--) Chipset Supported AMD Graphics Processor (0x9649) found
[ 19.111] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 19.113] (II) fglrx(0): pEnt->device->identifier=0x2351e30
[ 19.113] (II) fglrx(1): pEnt->device->identifier=0x2351e30
[ 19.113] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 19.114] (II) Loading sub module "vgahw"
[ 19.114] (II) LoadModule: "vgahw"
[ 19.114] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 19.125] (II) Module vgahw: vendor="X.Org Foundation"
[ 19.125] compiled for 1.14.3, module version = 0.1.0
[ 19.125] ABI class: X.Org Video Driver, version 14.1
[ 19.126] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 19.126] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 19.126] (==) fglrx(0): Default visual is TrueColor
[ 19.126] (==) fglrx(0): RGB weight 888
[ 19.126] (II) fglrx(0): Using 8 bits per RGB
[ 19.126] (==) fglrx(0): Buffer Tiling is ON
[ 19.126] (II) Loading sub module "fglrxdrm"
[ 19.126] (II) LoadModule: "fglrxdrm"
[ 19.126] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 19.126] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 19.126] compiled for 1.4.99.906, module version = 13.20.5
[ 19.129] ukiDynamicMajor: found major device number 250
[ 19.130] ukiDynamicMajor: found major device number 250
[ 19.130] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 19.130] ukiOpenDevice: node name is /dev/ati/card0
[ 19.130] ukiOpenDevice: open result is 11, (OK)
[ 19.130] ukiOpenByBusid: ukiOpenMinor returns 11
[ 19.130] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 19.130] (**) fglrx(0): NoAccel = NO
[ 19.130] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 19.130] (--) fglrx(0): Chipset: "AMD Radeon(TM) HD 6480G" (Chipset = 0x9649)
[ 19.130] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x3566)
[ 19.130] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 19.130] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 19.130] (--) fglrx(0): MMIO registers at 0xf0300000
[ 19.130] (--) fglrx(0): I/O port at 0x00004000
[ 19.130] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 19.192] (II) fglrx(0): AC Adapter is used
[ 19.417] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 19.443] (II) Loading sub module "vbe"
[ 19.443] (II) LoadModule: "vbe"
[ 19.443] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 19.456] (II) Module vbe: vendor="X.Org Foundation"
[ 19.456] compiled for 1.14.3, module version = 1.1.0
[ 19.456] ABI class: X.Org Video Driver, version 14.1
[ 19.456] (II) fglrx(0): VESA BIOS detected
[ 19.456] (II) fglrx(0): VESA VBE Version 3.0
[ 19.456] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 19.456] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 19.456] (II) fglrx(0): VESA VBE OEM Software Rev: 12.43
[ 19.456] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[ 19.456] (II) fglrx(0): VESA VBE OEM Product: SUMO
[ 19.456] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 19.456] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 19.456] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 19.456] (II) fglrx(0): PCIE card detected
[ 19.457] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 19.457] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 19.457] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 19.457] (II) fglrx(0): RandR 1.2 support is enabled!
[ 19.457] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 19.457] (==) fglrx(0): Center Mode is disabled
[ 19.457] (II) Loading sub module "fb"
[ 19.457] (II) LoadModule: "fb"
[ 19.457] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19.477] (II) Module fb: vendor="X.Org Foundation"
[ 19.477] compiled for 1.14.3, module version = 1.0.0
[ 19.477] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.477] (II) Loading sub module "ddc"
[ 19.477] (II) LoadModule: "ddc"
[ 19.477] (II) Module "ddc" already built-in
[ 19.771] (II) fglrx(0): Output LVDS has no monitor section
[ 19.771] (II) fglrx(0): Output DFP1 using monitor section 0-DFP1
[ 19.771] (**) fglrx(0): Option "PreferredMode" "1280x768"
[ 19.771] (**) fglrx(0): Option "Position" "0 0"
[ 19.771] (**) fglrx(0): Option "Disable" "false"
[ 19.771] (**) fglrx(0): Option "Rotate" "normal"
[ 19.771] (**) fglrx(0): Option "TargetRefresh" "60"
[ 19.771] (II) fglrx(0): Output CRT1 has no monitor section
[ 19.771] (II) Loading sub module "ddc"
[ 19.771] (II) LoadModule: "ddc"
[ 19.771] (II) Module "ddc" already built-in
[ 19.771] (II) fglrx(0): Connected Display0: LVDS
[ 19.771] (II) fglrx(0): Display0 EDID data ---------------------------
[ 19.771] (II) fglrx(0): Manufacturer: LGD Model: 2f2 Serial#: 0
[ 19.771] (II) fglrx(0): Year: 2010 Week: 0
[ 19.771] (II) fglrx(0): EDID Version: 1.3
[ 19.771] (II) fglrx(0): Digital Display Input
[ 19.771] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 19.771] (II) fglrx(0): Gamma: 2.20
[ 19.771] (II) fglrx(0): No DPMS capabilities specified
[ 19.771] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 19.771] (II) fglrx(0): First detailed timing is preferred mode
[ 19.771] (II) fglrx(0): redX: 0.605 redY: 0.355 greenX: 0.329 greenY: 0.579
[ 19.771] (II) fglrx(0): blueX: 0.150 blueY: 0.055 whiteX: 0.313 whiteY: 0.329
[ 19.771] (II) fglrx(0): Manufacturer's mask: 0
[ 19.771] (II) fglrx(0): Supported detailed timing:
[ 19.771] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 19.771] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1442 h_blank_end 1480 h_border: 0
[ 19.771] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 780 v_border: 0
[ 19.772] (II) fglrx(0): LG Display
[ 19.772] (II) fglrx(0): LP156WH4-TLC1
[ 19.772] (II) fglrx(0): EDID (in hex):
[ 19.772] (II) fglrx(0): 00ffffffffffff0030e4f20200000000
[ 19.772] (II) fglrx(0): 00140103802213780a05859b5b549426
[ 19.772] (II) fglrx(0): 0e505400000001010101010101010101
[ 19.772] (II) fglrx(0): 010101010101121b567250000c302428
[ 19.772] (II) fglrx(0): 350058c2100000190000000000000000
[ 19.772] (II) fglrx(0): 00000000000000000000000000fe004c
[ 19.772] (II) fglrx(0): 4720446973706c61790a2020000000fe
[ 19.772] (II) fglrx(0): 004c503135365748342d544c433100ff
[ 19.772] (II) fglrx(0): End of Display0 EDID data --------------------
[ 19.772] (WW) fglrx(0): Dynamic Surface Resizing cannot be enabled
[ 19.772] (II) fglrx(0): EDID for output LVDS
[ 19.772] (II) fglrx(0): Manufacturer: LGD Model: 2f2 Serial#: 0
[ 19.772] (II) fglrx(0): Year: 2010 Week: 0
[ 19.772] (II) fglrx(0): EDID Version: 1.3
[ 19.772] (II) fglrx(0): Digital Display Input
[ 19.772] (II) fglrx(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 19.772] (II) fglrx(0): Gamma: 2.20
[ 19.772] (II) fglrx(0): No DPMS capabilities specified
[ 19.772] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 19.772] (II) fglrx(0): First detailed timing is preferred mode
[ 19.772] (II) fglrx(0): redX: 0.605 redY: 0.355 greenX: 0.329 greenY: 0.579
[ 19.772] (II) fglrx(0): blueX: 0.150 blueY: 0.055 whiteX: 0.313 whiteY: 0.329
[ 19.772] (II) fglrx(0): Manufacturer's mask: 0
[ 19.772] (II) fglrx(0): Supported detailed timing:
[ 19.772] (II) fglrx(0): clock: 69.3 MHz Image Size: 344 x 194 mm
[ 19.772] (II) fglrx(0): h_active: 1366 h_sync: 1402 h_sync_end 1442 h_blank_end 1480 h_border: 0
[ 19.772] (II) fglrx(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 780 v_border: 0
[ 19.772] (II) fglrx(0): LG Display
[ 19.772] (II) fglrx(0): LP156WH4-TLC1
[ 19.772] (II) fglrx(0): EDID (in hex):
[ 19.773] (II) fglrx(0): 00ffffffffffff0030e4f20200000000
[ 19.773] (II) fglrx(0): 00140103802213780a05859b5b549426
[ 19.773] (II) fglrx(0): 0e505400000001010101010101010101
[ 19.773] (II) fglrx(0): 010101010101121b567250000c302428
[ 19.773] (II) fglrx(0): 350058c2100000190000000000000000
[ 19.773] (II) fglrx(0): 00000000000000000000000000fe004c
[ 19.773] (II) fglrx(0): 4720446973706c61790a2020000000fe
[ 19.773] (II) fglrx(0): 004c503135365748342d544c433100ff
[ 19.773] (II) fglrx(0): EDID vendor "LGD", prod id 754
[ 19.773] (II) fglrx(0): Printing DDC gathered Modelines:
[ 19.773] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1402 1442 1480 768 771 776 780 -hsync -vsync (46.8 kHz eP)
[ 19.773] (II) fglrx(0): Printing probed modes for output LVDS
[ 19.773] (II) fglrx(0): Modeline "1366x768"x60.0 69.30 1366 1402 1442 1480 768 771 776 780 -hsync -vsync (46.8 kHz eP)
[ 19.773] (II) fglrx(0): Modeline "1360x768"x60.0 69.30 1360 1402 1442 1480 768 771 776 780 -hsync -vsync (46.8 kHz e)
[ 19.773] (II) fglrx(0): Modeline "1280x768"x60.0 69.30 1280 1402 1442 1480 768 771 776 780 -hsync -vsync (46.8 kHz e)
[ 19.773] (II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1402 1442 1480 720 771 776 780 -hsync -vsync (46.8 kHz e)
[ 19.773] (II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1402 1442 1480 768 771 776 780 -hsync -vsync (46.8 kHz e)
[ 19.773] (II) fglrx(0): Modeline "1024x600"x60.0 69.30 1024 1402 1442 1480 600 771 776 780 -hsync -vsync (46.8 kHz e)
[ 19.773] (II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1402 1442 1480 600 771 776 780 -hsync -vsync (46.8 kHz e)
[ 19.773] (II) fglrx(0): Modeline "800x480"x60.0 69.30 800 1402 1442 1480 480 771 776 780 -hsync -vsync (46.8 kHz e)
[ 19.773] (II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1402 1442 1480 480 771 776 780 -hsync -vsync (46.8 kHz e)
[ 19.773] (II) fglrx(0): EDID for output DFP1
[ 19.773] (II) fglrx(0): EDID for output CRT1
[ 19.773] (II) fglrx(0): Output LVDS connected
[ 19.773] (II) fglrx(0): Output DFP1 disconnected
[ 19.773] (II) fglrx(0): Output CRT1 disconnected
[ 19.773] (II) fglrx(0): Using user preference for initial modes
[ 19.773] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 19.773] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19.773] (II) fglrx(0): Display dimensions: (340, 190) mm
[ 19.773] (II) fglrx(0): DPI set to (102, 102)
[ 19.773] (II) fglrx(0): Adapter AMD Radeon(TM) HD 6480G has 2 configurable heads and 1 displays connected.
[ 19.773] (==) fglrx(0): PseudoColor visuals disabled
[ 19.773] (II) Loading sub module "ramdac"
[ 19.773] (II) LoadModule: "ramdac"
[ 19.773] (II) Module "ramdac" already built-in
[ 19.773] (==) fglrx(0): NoDRI = NO
[ 19.773] (==) fglrx(0): Capabilities: 0x00000000
[ 19.773] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 19.773] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 19.773] (==) fglrx(0): UseFastTLS=0
[ 19.773] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 19.773] (II) fglrx(1): === [xdl_xs114_atiddxPreInit] === begin
[ 19.773] (WW) fglrx(1): Quitting screen 1 -- no monitor specified.
[ 19.773] (II) fglrx(1): === [xdl_xs114_atiddxPreInit] === end
[ 19.773] (II) UnloadModule: "fglrx"
[ 19.773] (II) UnloadSubModule: "fglrxdrm"
[ 19.773] (--) Depth 24 pixmap format is 32 bpp
[ 19.773] Loading extension ATIFGLRXDRI
[ 19.773] (II) fglrx(0): doing swlDriScreenInit
[ 19.773] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 19.774] ukiDynamicMajor: found major device number 250
[ 19.774] ukiDynamicMajor: found major device number 250
[ 19.774] ukiDynamicMajor: found major device number 250
[ 19.774] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 19.774] ukiOpenDevice: node name is /dev/ati/card0
[ 19.774] ukiOpenDevice: open result is 12, (OK)
[ 19.774] ukiOpenByBusid: ukiOpenMinor returns 12
[ 19.774] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 19.774] (II) fglrx(0): [uki] DRM interface version 1.0
[ 19.774] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0"
[ 19.774] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 19.774] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f428f53d000
[ 19.774] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 19.774] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 19.774] (II) fglrx(0): swlDriScreenInit done
[ 19.774] (II) fglrx(0): Kernel Module Version Information:
[ 19.774] (II) fglrx(0): Name: fglrx
[ 19.774] (II) fglrx(0): Version: 13.20.5
[ 19.774] (II) fglrx(0): Date: Sep 21 2013
[ 19.774] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 19.774] (II) fglrx(0): Kernel Module version matches driver.
[ 19.774] (II) fglrx(0): Kernel Module Build Time Information:
[ 19.774] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.11.4-1-ck
[ 19.774] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 19.774] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 19.774] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 19.774] (II) fglrx(0): [uki] register handle = 0x00004000
[ 19.797] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[ 19.797] (II) fglrx(0): DRI initialization successfull
[ 19.809] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01110000
[ 19.817] (==) fglrx(0): Backing store disabled
[ 19.817] Loading extension FGLRXEXTENSION
[ 19.817] (==) fglrx(0): DPMS enabled
[ 19.817] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 19.818] (**) fglrx(0): Textured Video is enabled.
[ 19.818] (II) LoadModule: "glesx"
[ 19.818] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 19.950] (II) Module glesx: vendor="X.Org Foundation"
[ 19.950] compiled for 1.4.99.906, module version = 1.0.0
[ 19.950] Loading extension GLESX
[ 19.950] (II) fglrx(0): GLESX enableFlags = 592
[ 19.951] (II) fglrx(0): GLESX is enabled
[ 19.951] (II) LoadModule: "amdxmm"
[ 19.951] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 19.965] (II) Module amdxmm: vendor="X.Org Foundation"
[ 19.965] compiled for 1.4.99.906, module version = 2.0.0
[ 19.989] Loading extension AMDXVOPL
[ 19.989] Loading extension AMDXVBA
[ 20.001] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 20.006] (II) fglrx(0): Enable composite support successfully
[ 20.006] (II) fglrx(0): X context handle = 0x1
[ 20.006] (II) fglrx(0): [DRI] installation complete
[ 20.006] (==) fglrx(0): Silken mouse enabled
[ 20.006] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 20.007] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 20.016] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 20.016] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 21.143] (--) RandR disabled
[ 21.151] ukiDynamicMajor: found major device number 250
[ 21.151] ukiDynamicMajor: found major device number 250
[ 21.151] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 21.151] ukiOpenDevice: node name is /dev/ati/card0
[ 21.151] ukiOpenDevice: open result is 13, (OK)
[ 21.151] ukiOpenByBusid: ukiOpenMinor returns 13
[ 21.151] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 21.151] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 21.659] ukiDynamicMajor: found major device number 250
[ 21.659] ukiDynamicMajor: found major device number 250
[ 21.659] ukiDynamicMajor: found major device number 250
[ 21.659] ukiOpenDevice: node name is /dev/ati/card0
[ 21.659] ukiOpenDevice: open result is 14, (OK)
[ 21.659] ukiGetBusid returned 'PCI:0:1:0'
[ 21.659] ukiOpenDevice: node name is /dev/ati/card1
[ 21.659] ukiOpenDevice: open result is -1, (No such device)
[ 21.659] ukiOpenDevice: open result is -1, (No such device)
[ 21.659] ukiOpenDevice: Open failed
[ 21.659] ukiOpenDevice: node name is /dev/ati/card2
[ 21.659] ukiOpenDevice: open result is -1, (No such device)
[ 21.659] ukiOpenDevice: open result is -1, (No such device)
[ 21.659] ukiOpenDevice: Open failed
[ 21.659] ukiOpenDevice: node name is /dev/ati/card3
[ 21.659] ukiOpenDevice: open result is -1, (No such device)
[ 21.659] ukiOpenDevice: open result is -1, (No such device)
[ 21.659] ukiOpenDevice: Open failed
[ 21.659] ukiOpenDevice: node name is /dev/ati/card4
[ 21.659] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: Open failed
[ 21.660] ukiOpenDevice: node name is /dev/ati/card5
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: Open failed
[ 21.660] ukiOpenDevice: node name is /dev/ati/card6
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: Open failed
[ 21.660] ukiOpenDevice: node name is /dev/ati/card7
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: Open failed
[ 21.660] ukiOpenDevice: node name is /dev/ati/card8
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: Open failed
[ 21.660] ukiOpenDevice: node name is /dev/ati/card9
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: Open failed
[ 21.660] ukiOpenDevice: node name is /dev/ati/card10
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: Open failed
[ 21.660] ukiOpenDevice: node name is /dev/ati/card11
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.660] ukiOpenDevice: open result is -1, (No such device)
[ 21.661] ukiOpenDevice: Open failed
[ 21.661] ukiOpenDevice: node name is /dev/ati/card12
[ 21.661] ukiOpenDevice: open result is -1, (No such device)
[ 21.661] ukiOpenDevice: open result is -1, (No such device)
[ 21.661] ukiOpenDevice: Open failed
[ 21.661] ukiOpenDevice: node name is /dev/ati/card13
[ 21.661] ukiOpenDevice: open result is -1, (No such device)
[ 21.661] ukiOpenDevice: open result is -1, (No such device)
[ 21.661] ukiOpenDevice: Open failed
[ 21.661] ukiOpenDevice: node name is /dev/ati/card14
[ 21.661] ukiOpenDevice: open result is -1, (No such device)
[ 21.661] ukiOpenDevice: open result is -1, (No such device)
[ 21.661] ukiOpenDevice: Open failed
[ 21.661] ukiOpenDevice: node name is /dev/ati/card15
[ 21.661] ukiOpenDevice: open result is -1, (No such device)
[ 21.661] ukiOpenDevice: open result is -1, (No such device)
[ 21.661] ukiOpenDevice: Open failed
[ 21.661] ukiDynamicMajor: found major device number 250
[ 21.661] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 21.661] ukiOpenDevice: node name is /dev/ati/card0
[ 21.661] ukiOpenDevice: open result is 14, (OK)
[ 21.661] ukiOpenByBusid: ukiOpenMinor returns 14
[ 21.661] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 22.504] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 22.504] ukiDynamicMajor: found major device number 250
[ 22.505] ukiDynamicMajor: found major device number 250
[ 22.505] ukiDynamicMajor: found major device number 250
[ 22.505] ukiOpenDevice: node name is /dev/ati/card0
[ 22.505] ukiOpenDevice: open result is 15, (OK)
[ 22.505] ukiGetBusid returned 'PCI:0:1:0'
[ 22.505] ukiOpenDevice: node name is /dev/ati/card1
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card2
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card3
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card4
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card5
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card6
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card7
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card8
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card9
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card10
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card11
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card12
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card13
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card14
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiOpenDevice: node name is /dev/ati/card15
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: open result is -1, (No such device)
[ 22.505] ukiOpenDevice: Open failed
[ 22.505] ukiDynamicMajor: found major device number 250
[ 22.505] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 22.505] ukiOpenDevice: node name is /dev/ati/card0
[ 22.505] ukiOpenDevice: open result is 15, (OK)
[ 22.505] ukiOpenByBusid: ukiOpenMinor returns 15
[ 22.505] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 22.607] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 23.018] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 23.018] (**) Power Button: Applying InputClass "system-keyboard"
[ 23.018] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.018] (II) LoadModule: "evdev"
[ 23.018] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 23.049] (II) Module evdev: vendor="X.Org Foundation"
[ 23.049] compiled for 1.14.3, module version = 2.8.2
[ 23.049] Module class: X.Org XInput Driver
[ 23.049] ABI class: X.Org XInput driver, version 19.1
[ 23.049] (II) Using input driver 'evdev' for 'Power Button'
[ 23.049] (**) Power Button: always reports core events
[ 23.049] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 23.049] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.049] (--) evdev: Power Button: Found keys
[ 23.049] (II) evdev: Power Button: Configuring as keyboard
[ 23.049] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 23.049] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 23.049] (**) Option "xkb_rules" "evdev"
[ 23.049] (**) Option "xkb_model" "pc104"
[ 23.049] (**) Option "xkb_layout" "uk(qwerty)"
[ 23.077] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[ 23.077] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 23.117] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 23.117] (**) Video Bus: Applying InputClass "system-keyboard"
[ 23.117] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 23.117] (II) Using input driver 'evdev' for 'Video Bus'
[ 23.117] (**) Video Bus: always reports core events
[ 23.117] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 23.117] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 23.117] (--) evdev: Video Bus: Found keys
[ 23.117] (II) evdev: Video Bus: Configuring as keyboard
[ 23.117] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[ 23.117] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 23.117] (**) Option "xkb_rules" "evdev"
[ 23.117] (**) Option "xkb_model" "pc104"
[ 23.118] (**) Option "xkb_layout" "uk(qwerty)"
[ 23.118] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 23.118] (**) Power Button: Applying InputClass "system-keyboard"
[ 23.118] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 23.118] (II) Using input driver 'evdev' for 'Power Button'
[ 23.118] (**) Power Button: always reports core events
[ 23.118] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 23.118] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 23.118] (--) evdev: Power Button: Found keys
[ 23.118] (II) evdev: Power Button: Configuring as keyboard
[ 23.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 23.118] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 23.118] (**) Option "xkb_rules" "evdev"
[ 23.118] (**) Option "xkb_model" "pc104"
[ 23.118] (**) Option "xkb_layout" "uk(qwerty)"
[ 23.119] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 23.119] (II) No input driver specified, ignoring this device.
[ 23.119] (II) This device may have been added with another device file.
[ 23.119] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event7)
[ 23.119] (II) No input driver specified, ignoring this device.
[ 23.119] (II) This device may have been added with another device file.
[ 23.119] (II) config/udev: Adding input device HID 04d9:2517 (/dev/input/event2)
[ 23.119] (**) HID 04d9:2517: Applying InputClass "system-keyboard"
[ 23.119] (**) HID 04d9:2517: Applying InputClass "evdev keyboard catchall"
[ 23.119] (II) Using input driver 'evdev' for 'HID 04d9:2517'
[ 23.119] (**) HID 04d9:2517: always reports core events
[ 23.119] (**) evdev: HID 04d9:2517: Device: "/dev/input/event2"
[ 23.119] (--) evdev: HID 04d9:2517: Vendor 0x4d9 Product 0x2517
[ 23.119] (--) evdev: HID 04d9:2517: Found keys
[ 23.119] (II) evdev: HID 04d9:2517: Configuring as keyboard
[ 23.119] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.0/input/input2/event2"
[ 23.119] (II) XINPUT: Adding extended input device "HID 04d9:2517" (type: KEYBOARD, id 9)
[ 23.119] (**) Option "xkb_rules" "evdev"
[ 23.119] (**) Option "xkb_model" "pc104"
[ 23.119] (**) Option "xkb_layout" "uk(qwerty)"
[ 23.120] (II) config/udev: Adding input device HID 04d9:2517 (/dev/input/event1)
[ 23.120] (**) HID 04d9:2517: Applying InputClass "system-keyboard"
[ 23.120] (**) HID 04d9:2517: Applying InputClass "evdev pointer catchall"
[ 23.120] (**) HID 04d9:2517: Applying InputClass "evdev keyboard catchall"
[ 23.120] (II) Using input driver 'evdev' for 'HID 04d9:2517'
[ 23.120] (**) HID 04d9:2517: always reports core events
[ 23.120] (**) evdev: HID 04d9:2517: Device: "/dev/input/event1"
[ 23.120] (--) evdev: HID 04d9:2517: Vendor 0x4d9 Product 0x2517
[ 23.120] (--) evdev: HID 04d9:2517: Found 9 mouse buttons
[ 23.120] (--) evdev: HID 04d9:2517: Found scroll wheel(s)
[ 23.120] (--) evdev: HID 04d9:2517: Found relative axes
[ 23.120] (--) evdev: HID 04d9:2517: Found x and y relative axes
[ 23.120] (--) evdev: HID 04d9:2517: Found absolute axes
[ 23.120] (II) evdev: HID 04d9:2517: Forcing absolute x/y axes to exist.
[ 23.120] (--) evdev: HID 04d9:2517: Found keys
[ 23.120] (II) evdev: HID 04d9:2517: Configuring as mouse
[ 23.120] (II) evdev: HID 04d9:2517: Configuring as keyboard
[ 23.120] (II) evdev: HID 04d9:2517: Adding scrollwheel support
[ 23.120] (**) evdev: HID 04d9:2517: YAxisMapping: buttons 4 and 5
[ 23.120] (**) evdev: HID 04d9:2517: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 23.120] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-1/4-1:1.1/input/input1/event1"
[ 23.120] (II) XINPUT: Adding extended input device "HID 04d9:2517" (type: KEYBOARD, id 10)
[ 23.120] (**) Option "xkb_rules" "evdev"
[ 23.120] (**) Option "xkb_model" "pc104"
[ 23.120] (**) Option "xkb_layout" "uk(qwerty)"
[ 23.120] (II) evdev: HID 04d9:2517: initialized for relative axes.
[ 23.120] (WW) evdev: HID 04d9:2517: ignoring absolute axes.
[ 23.120] (**) HID 04d9:2517: (accel) keeping acceleration scheme 1
[ 23.120] (**) HID 04d9:2517: (accel) acceleration profile 0
[ 23.121] (**) HID 04d9:2517: (accel) acceleration factor: 2.000
[ 23.121] (**) HID 04d9:2517: (accel) acceleration threshold: 4
[ 23.121] (II) config/udev: Adding input device HID 04d9:2517 (/dev/input/mouse0)
[ 23.121] (**) HID 04d9:2517: Applying InputClass "system-keyboard"
[ 23.121] (II) No input driver specified, ignoring this device.
[ 23.121] (II) This device may have been added with another device file.
[ 23.121] (II) config/udev: Adding input device HP Webcam-101 (/dev/input/event14)
[ 23.121] (**) HP Webcam-101: Applying InputClass "system-keyboard"
[ 23.121] (**) HP Webcam-101: Applying InputClass "evdev keyboard catchall"
[ 23.121] (II) Using input driver 'evdev' for 'HP Webcam-101'
[ 23.121] (**) HP Webcam-101: always reports core events
[ 23.121] (**) evdev: HP Webcam-101: Device: "/dev/input/event14"
[ 23.121] (--) evdev: HP Webcam-101: Vendor 0x5c8 Product 0x21e
[ 23.121] (--) evdev: HP Webcam-101: Found keys
[ 23.121] (II) evdev: HP Webcam-101: Configuring as keyboard
[ 23.121] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input14/event14"
[ 23.121] (II) XINPUT: Adding extended input device "HP Webcam-101" (type: KEYBOARD, id 11)
[ 23.121] (**) Option "xkb_rules" "evdev"
[ 23.121] (**) Option "xkb_model" "pc104"
[ 23.121] (**) Option "xkb_layout" "uk(qwerty)"
[ 23.122] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 23.122] (II) No input driver specified, ignoring this device.
[ 23.122] (II) This device may have been added with another device file.
[ 23.122] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event10)
[ 23.122] (II) No input driver specified, ignoring this device.
[ 23.122] (II) This device may have been added with another device file.
[ 23.122] (II) config/udev: Adding input device HD-Audio Generic Front Headphone (/dev/input/event9)
[ 23.122] (II) No input driver specified, ignoring this device.
[ 23.122] (II) This device may have been added with another device file.
[ 23.122] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 23.122] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 23.122] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 23.122] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 23.122] (**) AT Translated Set 2 keyboard: always reports core events
[ 23.122] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 23.122] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 23.122] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 23.122] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 23.122] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 23.122] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 23.122] (**) Option "xkb_rules" "evdev"
[ 23.122] (**) Option "xkb_model" "pc104"
[ 23.122] (**) Option "xkb_layout" "uk(qwerty)"
[ 23.123] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 23.123] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 23.123] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 23.123] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 23.123] (II) LoadModule: "synaptics"
[ 23.123] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 23.143] (II) Module synaptics: vendor="X.Org Foundation"
[ 23.143] compiled for 1.14.1, module version = 1.7.1
[ 23.143] Module class: X.Org XInput Driver
[ 23.143] ABI class: X.Org XInput driver, version 19.1
[ 23.143] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 23.143] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 23.143] (**) Option "Device" "/dev/input/event12"
[ 23.178] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 23.178] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5634 (res 51)
[ 23.178] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4598 (res 76)
[ 23.178] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 23.178] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 23.178] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 23.178] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 23.178] (**) Option "TapButton1" "1"
[ 23.178] (**) Option "TapButton2" "2"
[ 23.178] (**) Option "TapButton3" "3"
[ 23.178] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 23.178] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 23.194] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[ 23.194] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 23.194] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 23.194] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 23.194] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 23.194] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 23.194] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 23.194] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 23.194] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 23.194] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 23.195] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 23.195] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 23.195] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 23.195] (II) No input driver specified, ignoring this device.
[ 23.195] (II) This device may have been added with another device file.
[ 23.196] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event13)
[ 23.197] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[ 23.197] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 23.197] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 23.197] (**) HP WMI hotkeys: always reports core events
[ 23.197] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event13"
[ 23.197] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 23.197] (--) evdev: HP WMI hotkeys: Found keys
[ 23.197] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 23.197] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event13"
[ 23.197] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 23.197] (**) Option "xkb_rules" "evdev"
[ 23.197] (**) Option "xkb_model" "pc104"
[ 23.197] (**) Option "xkb_layout" "uk(qwerty)"
[ 23.205] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 23.206] (II) fglrx(0): Framebuffer compression enabled from crtc[0]: mcAddr=0xf0f53c000 with=0x800 height=0x258
[ 44.564] (II) fglrx(0): EDID vendor "LGD", prod id 754
[ 44.564] (II) fglrx(0): Printing DDC gathered Modelines:
[ 44.564] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1402 1442 1480 768 771 776 780 -hsync -vsync (46.8 kHz eP)
[ 52.467] (II) fglrx(0): EDID vendor "LGD", prod id 754
[ 52.467] (II) fglrx(0): Printing DDC gathered Modelines:
[ 52.467] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1402 1442 1480 768 771 776 780 -hsync -vsync (46.8 kHz eP)
[ 53.619] (II) fglrx(0): EDID vendor "LGD", prod id 754
[ 53.619] (II) fglrx(0): Printing DDC gathered Modelines:
[ 53.619] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1402 1442 1480 768 771 776 780 -hsync -vsync (46.8 kHz eP)
[ 66.105] (II) fglrx(0): EDID vendor "LGD", prod id 754
[ 66.105] (II) fglrx(0): Printing DDC gathered Modelines:
[ 66.105] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1402 1442 1480 768 771 776 780 -hsync -vsync (46.8 kHz eP)
[ 74.151] (II) fglrx(0): EDID vendor "LGD", prod id 754
[ 74.151] (II) fglrx(0): Printing DDC gathered Modelines:
[ 74.151] (II) fglrx(0): Modeline "1366x768"x0.0 69.30 1366 1402 1442 1480 768 771 776 780 -hsync -vsync (46.8 kHz eP)
[ 76.470] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 76.471] (II) fglrx(0): Backup framebuffer data.
[ 76.494] (II) fglrx(0): Backup complete.
[ 76.494] (II) fglrx(0): Framebuffer compression disabled from crtc[0]
[ 204.033] (II) evdev: HP WMI hotkeys: Close
[ 204.033] (II) UnloadModule: "evdev"
[ 204.033] (II) UnloadModule: "synaptics"
[ 204.033] (II) evdev: AT Translated Set 2 keyboard: Close
[ 204.033] (II) UnloadModule: "evdev"
[ 204.033] (II) evdev: HP Webcam-101: Close
[ 204.033] (II) UnloadModule: "evdev"
[ 204.033] (II) evdev: HID 04d9:2517: Close
[ 204.033] (II) UnloadModule: "evdev"
[ 204.033] (II) evdev: HID 04d9:2517: Close
[ 204.033] (II) UnloadModule: "evdev"
[ 204.034] (II) evdev: Power Button: Close
[ 204.034] (II) UnloadModule: "evdev"
[ 204.034] (II) evdev: Video Bus: Close
[ 204.034] (II) UnloadModule: "evdev"
[ 204.034] (II) evdev: Power Button: Close
[ 204.034] (II) UnloadModule: "evdev"
[ 204.037] (II) fglrx(0): Shutdown CMMQS
[ 204.040] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 204.040] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x2000 at 0x7f428f53d000
[ 204.040] (EE)
[ 204.040] (EE) Backtrace:
[ 204.943] (EE) 0: /usr/bin/Xorg (xorg_backtrace+0x3d) [0x57f67d]
[ 204.943] (EE) 1: /usr/bin/Xorg (0x400000+0x1833e9) [0x5833e9]
[ 204.943] (EE) 2: /usr/lib/libpthread.so.0 (0x7f428e886000+0xf870) [0x7f428e895870]
[ 204.943] (EE) 3: /usr/lib/libpciaccess.so.0 (0x7f428eaa4000+0x504e) [0x7f428eaa904e]
[ 204.943] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_x_inb+0x46) [0x7f428c0ebda6]
[ 204.943] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f428b845000+0x89fa85) [0x7f428c0e4a85]
[ 204.944] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (X86EMU_exec+0xa5) [0x7f428c0d81d5]
[ 204.945] (EE) 7: /usr/lib/xorg/modules/drivers/fglrx_drv.so (amd_xs113_int10_xf86ExecX86int10+0x46) [0x7f428c0ecf06]
[ 204.945] (EE) 8: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xf86ExecX86int10+0xd) [0x7f428bbce5dd]
[ 204.945] (EE) 9: /usr/lib/xorg/modules/libvbe.so (VBESetVBEMode+0x9d) [0x7f428b1eb65d]
[ 204.946] (EE) 10: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f428b845000+0x3bcce3) [0x7f428bc01ce3]
[ 204.946] (EE) 11: /usr/lib/xorg/modules/drivers/fglrx_drv.so (atiddxVBESetConsoleMode+0x44) [0x7f428bc01b34]
[ 204.947] (EE) 12: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxFreeScreen+0x730) [0x7f428bd60f00]
[ 204.947] (EE) 13: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs114_atiddxCloseScreen+0x321) [0x7f428bd60531]
[ 204.948] (EE) 14: /usr/lib/xorg/modules/drivers/fglrx_drv.so (0x7f428b845000+0x9074c6) [0x7f428c14c4c6]
[ 204.948] (EE) 15: /usr/bin/Xorg (0x400000+0xc4efe) [0x4c4efe]
[ 204.948] (EE) 16: /usr/bin/Xorg (0x400000+0x107de6) [0x507de6]
[ 204.948] (EE) 17: /usr/bin/Xorg (0x400000+0x26a47) [0x426a47]
[ 204.948] (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7f428d909bc5]
[ 204.948] (EE) 19: /usr/bin/Xorg (0x400000+0x26c81) [0x426c81]
[ 204.948] (EE)
[ 204.948] (EE) Segmentation fault at address 0x0
[ 204.949] (EE)
Fatal server error:
[ 204.949] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 204.949] (EE)
[ 204.949] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 204.949] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 204.949] (EE)
[ 204.950] (EE) Server terminated with error (1). Closing log file.
In case you want this information, I am rocking an AMD Radeon 6480G with the catalyst-hook package at version 13.10 from Vi0L0's repository and the linux-ck-k10 package (not the core kernel) from graysky's repository.
EDIT: I might create a bug about this on the ArchLinux Tracker.
EDIT2: It seems I am not the only person having this issue. Please see https://github.com/linuxmint/Cinnamon/issues/2436
Last edited by clfarron4 (2013-10-19 14:18:22)Wow, your logs are nealy identical to mine. I am runnig catalyst-hook on a 6850. This is with the default 3.11.1-1-ARCH kernel.
-- Reboot --
Oct 12 13:48:34 WhosYourDaddy systemd[386]: Failed to open private bus connection: Failed to connect to socket /run/user/1000/dbus/user_bus_socket: No such file or directory
Oct 12 13:48:34 WhosYourDaddy systemd[386]: Mounted /sys/kernel/config.
Oct 12 13:48:34 WhosYourDaddy systemd[386]: Stopped target Sound Card.
Oct 12 13:48:34 WhosYourDaddy systemd[386]: Starting Default.
Oct 12 13:48:34 WhosYourDaddy systemd[386]: Reached target Default.
Oct 12 13:48:34 WhosYourDaddy systemd[386]: Startup finished in 3ms.
Oct 12 13:49:05 WhosYourDaddy pulseaudio[483]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Oct 12 13:49:05 WhosYourDaddy pulseaudio[483]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
Oct 12 13:49:26 WhosYourDaddy pulseaudio[594]: [pulseaudio] pid.c: Stale PID file, overwriting.
Oct 12 13:49:26 WhosYourDaddy pulseaudio[594]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Oct 12 13:49:27 WhosYourDaddy pulseaudio[594]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
Oct 12 13:49:27 WhosYourDaddy pulseaudio[642]: [pulseaudio] pid.c: Daemon already running.
Oct 12 13:49:28 WhosYourDaddy cinnamon-session[583]: WARNING: Application 'cinnamon.desktop' killed by signal 15
Oct 12 13:49:29 WhosYourDaddy cinnamon-session[583]: WARNING: App 'cinnamon.desktop' respawning too quickly
Oct 12 13:49:29 WhosYourDaddy cinnamon-session[583]: CRITICAL: We failed, but the fail whale is dead. Sorry....
Oct 12 13:49:38 WhosYourDaddy cinnamon-session[583]: WARNING: App 'cinnamon.desktop' respawning too quickly
Oct 12 13:51:46 WhosYourDaddy systemd[386]: Time has been changed
Oct 12 13:53:16 WhosYourDaddy pulseaudio[995]: [pulseaudio] pid.c: Stale PID file, overwriting.
Oct 12 13:53:16 WhosYourDaddy pulseaudio[995]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Oct 12 13:53:16 WhosYourDaddy pulseaudio[995]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
Oct 12 13:53:16 WhosYourDaddy pulseaudio[1037]: [pulseaudio] pid.c: Daemon already running.
Oct 12 13:53:17 WhosYourDaddy cinnamon-session[984]: WARNING: Application 'cinnamon.desktop' killed by signal 15
Oct 12 13:53:18 WhosYourDaddy cinnamon-session[984]: WARNING: App 'cinnamon.desktop' respawning too quickly
Oct 12 13:53:18 WhosYourDaddy cinnamon-session[984]: CRITICAL: We failed, but the fail whale is dead. Sorry....
Oct 12 13:55:30 WhosYourDaddy pulseaudio[1273]: [pulseaudio] pid.c: Stale PID file, overwriting.
Oct 12 13:55:30 WhosYourDaddy pulseaudio[1273]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Oct 12 13:55:30 WhosYourDaddy pulseaudio[1273]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.GetProperties() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory.
Oct 12 13:55:31 WhosYourDaddy pulseaudio[1315]: [pulseaudio] pid.c: Daemon already running.
Oct 12 13:55:31 WhosYourDaddy cinnamon-session[1262]: WARNING: Application 'cinnamon.desktop' killed by signal 15
Oct 12 13:55:32 WhosYourDaddy cinnamon-session[1262]: WARNING: App 'cinnamon.desktop' respawning too quickly
Oct 12 13:55:32 WhosYourDaddy cinnamon-session[1262]: CRITICAL: We failed, but the fail whale is dead. Sorry....
Also here is Xorg
[ 427.361]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 427.362] X Protocol Version 11, Revision 0
[ 427.363] Build Operating System: Linux 3.11.1-1-ARCH x86_64
[ 427.363] Current Operating System: Linux WhosYourDaddy 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64
[ 427.363] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=82470171-e203-4aae-9554-cbb120ac852f rw quiet
[ 427.364] Build Date: 08 October 2013 08:48:10PM
[ 427.365]
[ 427.365] Current version of pixman: 0.30.2
[ 427.366] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 427.366] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 427.368] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 12 13:55:30 2013
[ 427.369] (==) Using config file: "/etc/X11/xorg.conf"
[ 427.370] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 427.370] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 427.371] (==) ServerLayout "aticonfig Layout"
[ 427.371] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 427.371] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 427.371] (**) | |-->Device "aticonfig-Device[0]-0"
[ 427.371] (==) Automatically adding devices
[ 427.371] (==) Automatically enabling devices
[ 427.371] (==) Automatically adding GPU devices
[ 427.371] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 427.371] Entry deleted from font path.
[ 427.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 427.371] Entry deleted from font path.
[ 427.371] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 427.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 427.371] Entry deleted from font path.
[ 427.371] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 427.371] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 427.371] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[ 427.371] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 427.371] (II) Loader magic: 0x7fdc20
[ 427.371] (II) Module ABI versions:
[ 427.371] X.Org ANSI C Emulation: 0.4
[ 427.371] X.Org Video Driver: 14.1
[ 427.371] X.Org XInput driver : 19.1
[ 427.371] X.Org Server Extension : 7.0
[ 427.371] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 427.372] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xd0400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 427.372] (--) PCI:*(0:1:0:0) 1002:6719:174b:186b rev 0, Mem @ 0xc0000000/268435456, 0xd0020000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 427.372] Initializing built-in extension Generic Event Extension
[ 427.373] Initializing built-in extension SHAPE
[ 427.373] Initializing built-in extension MIT-SHM
[ 427.374] Initializing built-in extension XInputExtension
[ 427.374] Initializing built-in extension XTEST
[ 427.375] Initializing built-in extension BIG-REQUESTS
[ 427.375] Initializing built-in extension SYNC
[ 427.376] Initializing built-in extension XKEYBOARD
[ 427.376] Initializing built-in extension XC-MISC
[ 427.377] Initializing built-in extension SECURITY
[ 427.377] Initializing built-in extension XINERAMA
[ 427.378] Initializing built-in extension XFIXES
[ 427.378] Initializing built-in extension RENDER
[ 427.379] Initializing built-in extension RANDR
[ 427.379] Initializing built-in extension COMPOSITE
[ 427.380] Initializing built-in extension DAMAGE
[ 427.380] Initializing built-in extension MIT-SCREEN-SAVER
[ 427.381] Initializing built-in extension DOUBLE-BUFFER
[ 427.381] Initializing built-in extension RECORD
[ 427.381] Initializing built-in extension DPMS
[ 427.382] Initializing built-in extension X-Resource
[ 427.382] Initializing built-in extension XVideo
[ 427.382] Initializing built-in extension XVideo-MotionCompensation
[ 427.383] Initializing built-in extension XFree86-VidModeExtension
[ 427.383] Initializing built-in extension XFree86-DGA
[ 427.384] Initializing built-in extension XFree86-DRI
[ 427.384] Initializing built-in extension DRI2
[ 427.384] (II) "glx" will be loaded by default.
[ 427.384] (II) LoadModule: "glx"
[ 427.384] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[ 427.384] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 427.384] compiled for 6.9.0, module version = 1.0.0
[ 427.384] Loading extension GLX
[ 427.384] (II) LoadModule: "fglrx"
[ 427.384] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 427.392] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 427.392] compiled for 1.4.99.906, module version = 13.20.5
[ 427.392] Module class: X.Org Video Driver
[ 427.392] (II) Loading sub module "fglrxdrm"
[ 427.392] (II) LoadModule: "fglrxdrm"
[ 427.392] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 427.392] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 427.392] compiled for 1.4.99.906, module version = 13.20.5
[ 427.392] (II) AMD Proprietary Linux Driver Version Identifier:13.20.5
[ 427.392] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.20.11
[ 427.392] (II) AMD Proprietary Linux Driver Build Date: Sep 21 2013 02:26:09
[ 427.392] (++) using VT number 1
[ 427.392] (WW) Falling back to old probe method for fglrx
[ 427.396] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 427.396] ukiDynamicMajor: found major device number 251
[ 427.396] ukiDynamicMajor: found major device number 251
[ 427.396] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 427.396] ukiOpenDevice: node name is /dev/ati/card0
[ 427.396] ukiOpenDevice: open result is 9, (OK)
[ 427.396] ukiOpenByBusid: ukiOpenMinor returns 9
[ 427.396] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 427.397] (--) Chipset Supported AMD Graphics Processor (0x6719) found
[ 427.398] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 427.398] (II) fglrx(0): pEnt->device->identifier=0x1ad34e0
[ 427.398] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 427.398] (II) Loading sub module "vgahw"
[ 427.398] (II) LoadModule: "vgahw"
[ 427.398] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 427.398] (II) Module vgahw: vendor="X.Org Foundation"
[ 427.398] compiled for 1.14.3, module version = 0.1.0
[ 427.398] ABI class: X.Org Video Driver, version 14.1
[ 427.398] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 427.398] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 427.398] (==) fglrx(0): Default visual is TrueColor
[ 427.398] (**) fglrx(0): Option "DPMS" "true"
[ 427.398] (==) fglrx(0): RGB weight 888
[ 427.398] (II) fglrx(0): Using 8 bits per RGB
[ 427.398] (==) fglrx(0): Buffer Tiling is ON
[ 427.398] (II) Loading sub module "fglrxdrm"
[ 427.398] (II) LoadModule: "fglrxdrm"
[ 427.399] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 427.399] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 427.399] compiled for 1.4.99.906, module version = 13.20.5
[ 427.399] ukiDynamicMajor: found major device number 251
[ 427.399] ukiDynamicMajor: found major device number 251
[ 427.399] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 427.399] ukiOpenDevice: node name is /dev/ati/card0
[ 427.399] ukiOpenDevice: open result is 11, (OK)
[ 427.399] ukiOpenByBusid: ukiOpenMinor returns 11
[ 427.399] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 427.399] (**) fglrx(0): NoAccel = NO
[ 427.399] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 427.399] (--) fglrx(0): Chipset: "AMD Radeon HD 6900 Series " (Chipset = 0x6719)
[ 427.399] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x186b)
[ 427.399] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 427.399] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 427.399] (--) fglrx(0): MMIO registers at 0xd0020000
[ 427.399] (--) fglrx(0): I/O port at 0x0000e000
[ 427.399] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 427.399] (II) fglrx(0): AC Adapter is used
[ 427.399] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 427.399] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[ 427.399] (II) fglrx(0): PCIE card detected
[ 427.399] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 427.399] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 427.399] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf800000000, MCFBSize = 0x80000000)
[ 427.399] (II) fglrx(0): RandR 1.2 support is enabled!
[ 427.399] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 427.400] (==) fglrx(0): Center Mode is disabled
[ 427.400] (II) Loading sub module "fb"
[ 427.400] (II) LoadModule: "fb"
[ 427.400] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 427.400] (II) Module fb: vendor="X.Org Foundation"
[ 427.400] compiled for 1.14.3, module version = 1.0.0
[ 427.400] ABI class: X.Org ANSI C Emulation, version 0.4
[ 427.400] (II) Loading sub module "ddc"
[ 427.400] (II) LoadModule: "ddc"
[ 427.400] (II) Module "ddc" already built-in
[ 427.475] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 427.475] (II) fglrx(0): Output DFP2 has no monitor section
[ 427.475] (II) fglrx(0): Output DFP3 has no monitor section
[ 427.475] (II) fglrx(0): Output DFP4 has no monitor section
[ 427.475] (II) fglrx(0): Output DFP5 has no monitor section
[ 427.475] (II) fglrx(0): Output DFP6 has no monitor section
[ 427.475] (II) fglrx(0): Output DFP7 has no monitor section
[ 427.475] (II) fglrx(0): Output CRT1 has no monitor section
[ 427.475] (II) Loading sub module "ddc"
[ 427.475] (II) LoadModule: "ddc"
[ 427.475] (II) Module "ddc" already built-in
[ 427.475] (II) fglrx(0): Connected Display0: DFP5
[ 427.475] (II) Quirked EDID physical size to 0x0 cm
[ 427.475] (II) fglrx(0): Display0 EDID data ---------------------------
[ 427.475] (II) fglrx(0): Manufacturer: SAM Model: 423 Serial#: 1415000628
[ 427.475] (II) fglrx(0): Year: 2009 Week: 37
[ 427.475] (II) fglrx(0): EDID Version: 1.3
[ 427.475] (II) fglrx(0): Digital Display Input
[ 427.475] (II) fglrx(0): Indeterminate output size
[ 427.475] (II) fglrx(0): Gamma: 2.60
[ 427.475] (II) fglrx(0): DPMS capabilities: Off
[ 427.475] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 427.475] (II) fglrx(0): First detailed timing is preferred mode
[ 427.475] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.608
[ 427.475] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 427.475] (II) fglrx(0): Supported established timings:
[ 427.475] (II) fglrx(0): 640x480@60Hz
[ 427.475] (II) fglrx(0): 800x600@56Hz
[ 427.475] (II) fglrx(0): 800x600@60Hz
[ 427.475] (II) fglrx(0): 1024x768@60Hz
[ 427.475] (II) fglrx(0): Manufacturer's mask: 0
[ 427.475] (II) fglrx(0): Supported standard timings:
[ 427.475] (II) fglrx(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 427.475] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 427.475] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 427.475] (II) fglrx(0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 427.475] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 427.475] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 427.475] (II) fglrx(0): Supported detailed timing:
[ 427.475] (II) fglrx(0): clock: 154.0 MHz Image Size: 160 x 90 mm
[ 427.475] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 427.475] (II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 427.475] (II) fglrx(0): Supported detailed timing:
[ 427.475] (II) fglrx(0): clock: 148.5 MHz Image Size: 160 x 90 mm
[ 427.475] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 427.475] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 427.475] (II) fglrx(0): Ranges: V min: 50 V max: 60 Hz, H min: 27 H max: 81 kHz, PixClock max 175 MHz
[ 427.475] (II) fglrx(0): Monitor name: SyncMaster
[ 427.475] (II) fglrx(0): Supported detailed timing:
[ 427.475] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 427.475] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 427.475] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 427.475] (II) fglrx(0): Supported detailed timing:
[ 427.475] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 427.475] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 427.475] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 427.475] (II) fglrx(0): Supported detailed timing:
[ 427.475] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 427.475] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 427.475] (II) fglrx(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 427.475] (II) fglrx(0): Supported detailed timing:
[ 427.475] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 427.475] (II) fglrx(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 427.475] (II) fglrx(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 427.475] (II) fglrx(0): Supported detailed timing:
[ 427.475] (II) fglrx(0): clock: 27.0 MHz Image Size: 160 x 90 mm
[ 427.475] (II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 427.475] (II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 427.475] (II) fglrx(0): Number of EDID sections to follow: 1
[ 427.475] (II) fglrx(0): EDID (in hex):
[ 427.475] (II) fglrx(0): 00ffffffffffff004c2d230434325754
[ 427.475] (II) fglrx(0): 25130103801009a02aef91a3544c9b26
[ 427.475] (II) fglrx(0): 0f5054230800a9408180814081009500
[ 427.475] (II) fglrx(0): b30001010101283c80a070b023403020
[ 427.476] (II) fglrx(0): 3600a05a0000001a023a801871382d40
[ 427.476] (II) fglrx(0): 582c4500a05a0000001e000000fd0032
[ 427.476] (II) fglrx(0): 3c1b5111000a202020202020000000fc
[ 427.476] (II) fglrx(0): 0053796e634d61737465720a2020016e
[ 427.476] (II) fglrx(0): End of Display0 EDID data --------------------
[ 427.476] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 427.476] (II) fglrx(0): EDID for output DFP1
[ 427.476] (II) fglrx(0): EDID for output DFP2
[ 427.476] (II) fglrx(0): EDID for output DFP3
[ 427.476] (II) fglrx(0): EDID for output DFP4
[ 427.476] (II) Quirked EDID physical size to 0x0 cm
[ 427.476] (II) fglrx(0): EDID for output DFP5
[ 427.476] (II) fglrx(0): Manufacturer: SAM Model: 423 Serial#: 1415000628
[ 427.476] (II) fglrx(0): Year: 2009 Week: 37
[ 427.476] (II) fglrx(0): EDID Version: 1.3
[ 427.476] (II) fglrx(0): Digital Display Input
[ 427.476] (II) fglrx(0): Indeterminate output size
[ 427.476] (II) fglrx(0): Gamma: 2.60
[ 427.476] (II) fglrx(0): DPMS capabilities: Off
[ 427.476] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 427.476] (II) fglrx(0): First detailed timing is preferred mode
[ 427.476] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.608
[ 427.476] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 427.476] (II) fglrx(0): Supported established timings:
[ 427.476] (II) fglrx(0): 640x480@60Hz
[ 427.476] (II) fglrx(0): 800x600@56Hz
[ 427.476] (II) fglrx(0): 800x600@60Hz
[ 427.476] (II) fglrx(0): 1024x768@60Hz
[ 427.476] (II) fglrx(0): Manufacturer's mask: 0
[ 427.476] (II) fglrx(0): Supported standard timings:
[ 427.476] (II) fglrx(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
[ 427.476] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 427.476] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 427.476] (II) fglrx(0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 427.476] (II) fglrx(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 427.476] (II) fglrx(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 427.476] (II) fglrx(0): Supported detailed timing:
[ 427.476] (II) fglrx(0): clock: 154.0 MHz Image Size: 160 x 90 mm
[ 427.476] (II) fglrx(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
[ 427.476] (II) fglrx(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
[ 427.476] (II) fglrx(0): Supported detailed timing:
[ 427.476] (II) fglrx(0): clock: 148.5 MHz Image Size: 160 x 90 mm
[ 427.476] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 427.476] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 427.476] (II) fglrx(0): Ranges: V min: 50 V max: 60 Hz, H min: 27 H max: 81 kHz, PixClock max 175 MHz
[ 427.476] (II) fglrx(0): Monitor name: SyncMaster
[ 427.476] (II) fglrx(0): Supported detailed timing:
[ 427.476] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 427.476] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 427.476] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 427.476] (II) fglrx(0): Supported detailed timing:
[ 427.476] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 427.476] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 427.476] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 427.476] (II) fglrx(0): Supported detailed timing:
[ 427.476] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 427.476] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 427.476] (II) fglrx(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 427.476] (II) fglrx(0): Supported detailed timing:
[ 427.476] (II) fglrx(0): clock: 74.2 MHz Image Size: 160 x 90 mm
[ 427.476] (II) fglrx(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 427.476] (II) fglrx(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 427.476] (II) fglrx(0): Supported detailed timing:
[ 427.476] (II) fglrx(0): clock: 27.0 MHz Image Size: 160 x 90 mm
[ 427.476] (II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 427.476] (II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 427.476] (II) fglrx(0): Number of EDID sections to follow: 1
[ 427.476] (II) fglrx(0): EDID (in hex):
[ 427.476] (II) fglrx(0): 00ffffffffffff004c2d230434325754
[ 427.476] (II) fglrx(0): 25130103801009a02aef91a3544c9b26
[ 427.476] (II) fglrx(0): 0f5054230800a9408180814081009500
[ 427.476] (II) fglrx(0): b30001010101283c80a070b023403020
[ 427.476] (II) fglrx(0): 3600a05a0000001a023a801871382d40
[ 427.476] (II) fglrx(0): 582c4500a05a0000001e000000fd0032
[ 427.476] (II) fglrx(0): 3c1b5111000a202020202020000000fc
[ 427.476] (II) fglrx(0): 0053796e634d61737465720a2020016e
[ 427.476] (II) fglrx(0): Printing probed modes for output DFP5
[ 427.476] (II) fglrx(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 427.476] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1920x1080"x60.0 74.25 1920 2008 2052 2200 1080 1085 1095 1125 interlace +hsync +vsync (33.8 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1920x1080"x50.0 74.25 1920 2448 2492 2640 1080 1085 1095 1125 interlace +hsync +vsync (28.1 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1920x1080"x59.9 74.18 1920 2008 2052 2200 1080 1085 1095 1125 interlace +hsync +vsync (33.7 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1600x1200"x60.0 130.25 1600 1648 1680 1760 1200 1203 1207 1235 -hsync +vsync (74.0 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1776x1000"x50.0 148.50 1776 2304 2348 2640 1000 1004 1009 1125 +hsync +vsync (56.2 kHz ez)
[ 427.476] (II) fglrx(0): Modeline "1776x1000"x59.9 148.35 1776 1864 1908 2200 1000 1004 1009 1125 +hsync +vsync (67.4 kHz ez)
[ 427.476] (II) fglrx(0): Modeline "1776x1000"x50.0 74.25 1776 2304 2348 2640 1000 1005 1015 1125 interlace +hsync +vsync (28.1 kHz ez)
[ 427.476] (II) fglrx(0): Modeline "1776x1000"x59.9 74.18 1776 1864 1908 2200 1000 1005 1015 1125 interlace +hsync +vsync (33.7 kHz ez)
[ 427.476] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1400x1050"x60.0 130.25 1400 1648 1680 1760 1050 1203 1207 1235 -hsync +vsync (74.0 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1600x900"x60.0 130.25 1600 1648 1680 1760 900 1203 1207 1235 -hsync +vsync (74.0 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1360x1024"x60.0 130.25 1360 1648 1680 1760 1024 1203 1207 1235 -hsync +vsync (74.0 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1280x1024"x60.0 91.00 1280 1328 1360 1440 1024 1027 1034 1054 -hsync +vsync (63.2 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1440x900"x60.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1280x960"x60.0 85.25 1280 1328 1360 1440 960 963 967 988 -hsync +vsync (59.2 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1280x800"x60.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1280x768"x60.0 71.00 1280 1328 1360 1440 768 803 809 823 +hsync -vsync (49.3 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1024x768"x60.0 56.00 1024 1072 1104 1184 768 771 775 790 -hsync +vsync (47.3 kHz e)
[ 427.476] (II) fglrx(0): Modeline "1152x648"x50.0 74.25 1152 1592 1632 1980 648 653 658 750 +hsync +vsync (37.5 kHz ez)
[ 427.476] (II) fglrx(0): Modeline "1152x648"x59.9 74.18 1152 1262 1302 1650 648 653 658 750 +hsync +vsync (45.0 kHz ez)
[ 427.476] (II) fglrx(0): Modeline "800x600"x60.0 35.50 800 848 880 960 600 603 607 618 -hsync +vsync (37.0 kHz e)
[ 427.476] (II) fglrx(0): Modeline "800x600"x56.0 33.00 800 848 880 960 600 603 607 616 -hsync +vsync (34.4 kHz e)
[ 427.476] (II) fglrx(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 427.476] (II) fglrx(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 427.476] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 427.476] (II) fglrx(0): EDID for output DFP6
[ 427.476] (II) fglrx(0): EDID for output DFP7
[ 427.476] (II) fglrx(0): EDID for output CRT1
[ 427.476] (II) fglrx(0): Output DFP1 disconnected
[ 427.476] (II) fglrx(0): Output DFP2 disconnected
[ 427.476] (II) fglrx(0): Output DFP3 disconnected
[ 427.476] (II) fglrx(0): Output DFP4 disconnected
[ 427.476] (II) fglrx(0): Output DFP5 connected
[ 427.476] (II) fglrx(0): Output DFP6 disconnected
[ 427.476] (II) fglrx(0): Output DFP7 disconnected
[ 427.476] (II) fglrx(0): Output CRT1 disconnected
[ 427.476] (II) fglrx(0): Using exact sizes for initial modes
[ 427.476] (II) fglrx(0): Output DFP5 using initial mode 1920x1200
[ 427.476] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 427.476] (II) fglrx(0): DPI set to (96, 96)
[ 427.476] (II) fglrx(0): Eyefinity capable adapter detected.
[ 427.476] (II) fglrx(0): Adapter AMD Radeon HD 6900 Series has 6 configurable heads and 1 displays connected.
[ 427.476] (==) fglrx(0): PseudoColor visuals disabled
[ 427.476] (II) Loading sub module "ramdac"
[ 427.476] (II) LoadModule: "ramdac"
[ 427.476] (II) Module "ramdac" already built-in
[ 427.476] (==) fglrx(0): NoDRI = NO
[ 427.476] (==) fglrx(0): Capabilities: 0x00000000
[ 427.476] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 427.476] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 427.476] (==) fglrx(0): UseFastTLS=0
[ 427.477] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 427.477] (--) Depth 24 pixmap format is 32 bpp
[ 427.477] Loading extension ATIFGLRXDRI
[ 427.477] (II) fglrx(0): doing swlDriScreenInit
[ 427.477] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 427.477] ukiDynamicMajor: found major device number 251
[ 427.477] ukiDynamicMajor: found major device number 251
[ 427.477] ukiDynamicMajor: found major device number 251
[ 427.477] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 427.477] ukiOpenDevice: node name is /dev/ati/card0
[ 427.477] ukiOpenDevice: open result is 12, (OK)
[ 427.477] ukiOpenByBusid: ukiOpenMinor returns 12
[ 427.477] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 427.477] (II) fglrx(0): [uki] DRM interface version 1.0
[ 427.477] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 427.477] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x335000
[ 427.477] (II) fglrx(0): [uki] mapped SAREA 0x335000 to 0x7f0862c25000
[ 427.477] (II) fglrx(0): [uki] framebuffer handle = 0x336000
[ 427.477] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 427.477] (II) fglrx(0): swlDriScreenInit done
[ 427.477] (II) fglrx(0): Kernel Module Version Information:
[ 427.477] (II) fglrx(0): Name: fglrx
[ 427.477] (II) fglrx(0): Version: 13.20.5
[ 427.477] (II) fglrx(0): Date: Sep 21 2013
[ 427.477] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 427.477] (II) fglrx(0): Kernel Module version matches driver.
[ 427.477] (II) fglrx(0): Kernel Module Build Time Information:
[ 427.477] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.11.4-1-ARCH
[ 427.477] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 427.477] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 427.477] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 427.477] (II) fglrx(0): [uki] register handle = 0x00337000
[ 427.477] (II) fglrx(0): DRI initialization successfull
[ 427.477] (II) fglrx(0): FBADPhys: 0xf800000000 FBMappedSize: 0x010e0000
[ 427.477] (==) fglrx(0): Backing store disabled
[ 427.477] Loading extension FGLRXEXTENSION
[ 427.477] (**) fglrx(0): DPMS enabled
[ 427.477] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 427.477] (**) fglrx(0): Textured Video is enabled.
[ 427.477] (II) LoadModule: "glesx"
[ 427.478] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 427.478] (II) Module glesx: vendor="X.Org Foundation"
[ 427.478] compiled for 1.4.99.906, module version = 1.0.0
[ 427.478] Loading extension GLESX
[ 427.478] (II) fglrx(0): GLESX enableFlags = 592
[ 427.478] (II) fglrx(0): GLESX is enabled
[ 427.478] (II) LoadModule: "amdxmm"
[ 427.478] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 427.478] (II) Module amdxmm: vendor="X.Org Foundation"
[ 427.478] compiled for 1.4.99.906, module version = 2.0.0
[ 427.488] Loading extension AMDXVOPL
[ 427.488] Loading extension AMDXVBA
[ 427.489] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 427.490] (II) fglrx(0): Enable composite support successfully
[ 427.490] (WW) fglrx(0): Option "VendorName" is not used
[ 427.490] (WW) fglrx(0): Option "ModelName" is not used
[ 427.490] (II) fglrx(0): X context handle = 0xa
[ 427.490] (II) fglrx(0): [DRI] installation complete
[ 427.490] (==) fglrx(0): Silken mouse enabled
[ 427.490] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 427.490] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 427.525] (--) RandR disabled
[ 427.528] ukiDynamicMajor: found major device number 251
[ 427.528] ukiDynamicMajor: found major device number 251
[ 427.528] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 427.528] ukiOpenDevice: node name is /dev/ati/card0
[ 427.528] ukiOpenDevice: open result is 13, (OK)
[ 427.528] ukiOpenByBusid: ukiOpenMinor returns 13
[ 427.528] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 427.528] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[ 427.529] ukiDynamicMajor: found major device number 251
[ 427.529] ukiDynamicMajor: found major device number 251
[ 427.529] ukiDynamicMajor: found major device number 251
[ 427.529] ukiOpenDevice: node name is /dev/ati/card0
[ 427.529] ukiOpenDevice: open result is 14, (OK)
[ 427.529] ukiGetBusid returned 'PCI:1:0:0'
[ 427.529] ukiOpenDevice: node name is /dev/ati/card1
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card2
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card3
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card4
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card5
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card6
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card7
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card8
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card9
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card10
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card11
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card12
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card13
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card14
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiOpenDevice: node name is /dev/ati/card15
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: open result is -1, (No such device)
[ 427.529] ukiOpenDevice: Open failed
[ 427.529] ukiDynamicMajor: found major device number 251
[ 427.529] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 427.529] ukiOpenDevice: node name is /dev/ati/card0
[ 427.529] ukiOpenDevice: open result is 14, (OK)
[ 427.529] ukiOpenByBusid: ukiOpenMinor returns 14
[ 427.529] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 427.593] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 427.593] ukiDynamicMajor: found major device number 251
[ 427.593] ukiDynamicMajor: found major device number 251
[ 427.593] ukiDynamicMajor: found major device number 251
[ 427.593] ukiOpenDevice: node name is /dev/ati/card0
[ 427.593] ukiOpenDevice: open result is 15, (OK)
[ 427.593] ukiGetBusid returned 'PCI:1:0:0'
[ 427.593] ukiOpenDevice: node name is /dev/ati/card1
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: Open failed
[ 427.593] ukiOpenDevice: node name is /dev/ati/card2
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: Open failed
[ 427.593] ukiOpenDevice: node name is /dev/ati/card3
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: Open failed
[ 427.593] ukiOpenDevice: node name is /dev/ati/card4
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: Open failed
[ 427.593] ukiOpenDevice: node name is /dev/ati/card5
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: Open failed
[ 427.593] ukiOpenDevice: node name is /dev/ati/card6
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: Open failed
[ 427.593] ukiOpenDevice: node name is /dev/ati/card7
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: Open failed
[ 427.593] ukiOpenDevice: node name is /dev/ati/card8
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: Open failed
[ 427.593] ukiOpenDevice: node name is /dev/ati/card9
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: Open failed
[ 427.593] ukiOpenDevice: node name is /dev/ati/card10
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: open result is -1, (No such device)
[ 427.593] ukiOpenDevice: Open failed
[ 427.594] ukiOpenDevice: node name is /dev/ati/card11
[ 427.594] ukiOpenDevice: open result is -1, (No such device)
[ 427.594] ukiOpenDevice: open result is -1, (No such device)
[ 427.594] ukiOpenDevice: Open failed
[ 427.594] ukiOpenDevice: node name is /dev/ati/card12
[ 427.594] ukiOpenDevice: open result is -1, (No such device)
[ 427.594] ukiOpenDevice: open result is -1, (No such device)
[ 427.594] ukiOpenDevice: Open failed
[ 427.594] ukiOpenDevice: node name is /dev/ati/card13
[ 427.594] ukiOpenDevice: open result is -1, (No such device)
[ 427.594] ukiOpenDevice: open result is -1, (No such device)
[ 427.594] ukiOpenDevice: Open failed
[ 427.594] ukiOpenDevice: node name is /dev/ati/card14
[ 427.594] ukiOpenDevice: open result is -1, (No such device)
[ 427.594] ukiOpenDevice: open result is -1, (No such device)
[ 427.594] ukiOpenDevice: Open failed
[ 427.594] ukiOpenDevice: node name is /dev/ati/card15
[ 427.594] ukiOpenDevice: open result is -1, (No such device)
[ 427.594] ukiOpenDevice: open result is -1, (No such device)
[ 427.594] ukiOpenDevice: Open failed
[ 427.594] ukiDynamicMajor: found major device number 251
[ 427.594] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 427.594] ukiOpenDevice: node name is /dev/ati/card0
[ 427.594] ukiOpenDevice: open result is 15, (OK)
[ 427.594] ukiOpenByBusid: ukiOpenMinor returns 15
[ 427.594] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 427.598] (II) fglrx(0): OverDrive5 Detected!
[ 427.601] (II) fglrx(0): Setting screen physical size to 508 x 317
[ 427.627] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 427.627] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 427.627] (II) LoadModule: "evdev"
[ 427.627] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 427.627] (II) Module evdev: vendor="X.Org Foundation"
[ 427.627] compiled for 1.14.3, module version = 2.8.2
[ 427.627] Module class: X.Org XInput Driver
[ 427.627] ABI class: X.Org XInput driver, version 19.1
[ 427.627] (II) Using input driver 'evdev' for 'Power Button'
[ 427.627] (**) Power Button: always reports core events
[ 427.627] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 427.627] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 427.627] (--) evdev: Power Button: Found keys
[ 427.627] (II) evdev: Power Button: Configuring as keyboard
[ 427.627] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 427.627] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 427.627] (**) Option "xkb_rules" "evdev"
[ 427.627] (**) Option "xkb_model" "pc104"
[ 427.627] (**) Option "xkb_layout" "us"
[ 427.637] (II) config/udev: Adding input device Video Bus (/dev/input/event18)
[ 427.637] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 427.637] (II) Using input driver 'evdev' for 'Video Bus'
[ 427.637] (**) Video Bus: always reports core events
[ 427.637] (**) evdev: Video Bus: Device: "/dev/input/event18"
[ 427.637] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 427.637] (--) evdev: Video Bus: Found keys
[ 427.637] (II) evdev: Video Bus: Configuring as keyboard
[ 427.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input18/event18"
[ 427.637] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 427.637] (**) Option "xkb_rules" "evdev"
[ 427.637] (**) Option "xkb_model" "pc104"
[ 427.637] (**) Option "xkb_layout" "us"
[ 427.637] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 427.637] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 427.637] (II) Using input driver 'evdev' for 'Power Button'
[ 427.637] (**) Power Button: always reports core events
[ 427.637] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 427.637] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 427.637] (--) evdev: Power Button: Found keys
[ 427.637] (II) evdev: Power Button: Configuring as keyboard
[ 427.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 427.637] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 427.637] (**) Option "xkb_rules" "evdev"
[ 427.637] (**) Option "xkb_model" "pc104"
[ 427.637] (**) Option "xkb_layout" "us"
[ 427.638] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event12)
[ 427.638] (II) No input driver specified, ignoring this device.
[ 427.638] (II) This device may have been added with another device file.
[ 427.638] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 427.638] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=8 (/dev/input/event19)
[ 427.638] (II) No input driver specified, ignoring this device.
[ 427.638] (II) This device may have been added with another device file.
[ 427.638] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=7 (/dev/input/event20)
[ 427.638] (II) No input driver specified, ignoring this device.
[ 427.638] (II) This device may have been added with another device file.
[ 427.638] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event21)
[ 427.638] (II) No input driver specified, ignoring this device.
[ 427.638] (II) This device may have been added with another device file.
[ 427.638] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event13)
[ 427.638] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 427.638] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 427.638] (**) Logitech USB Receiver: always reports core events
[ 427.638] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event13"
[ 427.638] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 427.638] (--) evdev: Logitech USB Receiver: Found keys
[ 427.638] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 427.638] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/input/input13/event13"
[ 427.638] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 427.638] (**) Option "xkb_rules" "evdev"
[ 427.638] (**) Option "xkb_model" "pc104"
[ 427.638] (**) Option "xkb_layout" "us"
[ 427.638] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event14)
[ 427.638] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 427.638] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 427.638] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 427.638] (**) Logitech USB Receiver: always reports core events
[ 427.638] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event14"
[ 427.638] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc517
[ 427.638] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 427.638] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 427.638] (--) evdev: Logitech USB Receiver: Found relative axes
[ 427.638] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 427.638] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 427.638] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 427.638] (--) evdev: Logitech USB Receiver: Found keys
[ 427.638] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 427.638] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 427.638] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 427.638] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 427.638] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 427.638] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/input/input14/event14"
[ 427.638] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 427.638] (**) Option "xkb_rules" "evdev"
[ 427.638] (**) Option "xkb_model" "pc104"
[ 427.638] (**) Option "xkb_layout" "us"
[ 427.639] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 427.639] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 427.639] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 427.639] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 427.639] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 427.639] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 427.639] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 427.639] (II) No input driver specified, ignoring this device.
[ 427.639] (II) This device may have been added with another device file.
[ 427.639] (II) config/udev: Adding input device Razer Razer BlackWidow Ultimate (/dev/input/event15)
[ 427.639] (**) Razer Razer BlackWidow Ultimate: Applying InputClass "evdev keyboard catchall"
[ 427.639] (II) Using input driver 'evdev' for 'Razer Razer BlackWidow Ultimate'
[ 427.639] (**) Razer Razer BlackWidow Ultimate: always reports core events
[ 427.639] (**) evdev: Razer Razer BlackWidow Ultimate: Device: "/dev/input/event15"
[ 427.639] (--) evdev: Razer Razer BlackWidow Ultimate: Vendor 0x1532 Product 0x10d
[ 427.639] (--) evdev: Razer Razer BlackWidow Ultimate: Found keys
[ 427.639] (II) evdev: Razer Razer BlackWidow Ultimate: Configuring as keyboard
[ 427.639] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.0/input/input15/event15"
[ 427.639] (II) XINPUT: Adding extended input device "Razer Razer BlackWidow Ultimate" (type: KEYBOARD, id 11)
[ 427.639] (**) Option "xkb_rules" "evdev"
[ 427.639] (**) Option "xkb_model" "pc104"
[ 427.639] (**) Option "xkb_layout" "us"
[ 427.639] (II) config/udev: Adding input device Razer Razer BlackWidow Ultimate (/dev/input/event16)
[ 427.639] (**) Razer Razer BlackWidow Ultimate: Applying InputClass "evdev keyboard catchall"
[ 427.639] (II) Using input driver 'evdev' for 'Razer Razer BlackWidow Ultimate'
[ 427.639] (**) Razer Razer BlackWidow Ultimate: always reports core events
[ 427.639] (**) evdev: Razer Razer BlackWidow Ultimate: Device: "/dev/input/event16"
[ 427.639] (II) evdev: Razer Razer BlackWidow Ultimate: Using mtdev for this device
[ 427.639] (--) evdev: Razer Razer BlackWidow Ultimate: Vendor 0x1532 Product 0x10d
[ 427.639] (--) evdev: Razer Razer BlackWidow Ultimate: Found 1 mouse buttons
[ 427.639] (--) evdev: Razer Razer BlackWidow Ultimate: Found scroll wheel(s)
[ 427.639] (--) evdev: Razer Razer BlackWidow Ultimate: Found relative axes
[ 427.639] (II) evdev: Razer Razer BlackWidow Ultimate: Forcing relative x/y axes to exist.
[ 427.639] (--) evdev: Razer Razer BlackWidow Ultimate: Found absolute axes
[ 427.639] (--) evdev: Razer Razer BlackWidow Ultimate: Found absolute multitouch axes
[ 427.639] (--) evdev: Razer Razer BlackWidow Ultimate: Found keys
[ 427.639] (II) evdev: Razer Razer BlackWidow Ultimate: Configuring as mouse
[ 427.639] (II) evdev: Razer Razer BlackWidow Ultimate: Configuring as keyboard
[ 427.639] (II) evdev: Razer Razer BlackWidow Ultimate: Adding scrollwheel support
[ 427.639] (**) evdev: Razer Razer BlackWidow Ultimate: YAxisMapping: buttons 4 and 5
[ 427.639] (**) evdev: Razer Razer BlackWidow Ultimate: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 427.639] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.1/input/input16/event16"
[ 427.639] (II) XINPUT: Adding extended input device "Razer Razer BlackWidow Ultimate" (type: KEYBOARD, id 12)
[ 427.639] (**) Option "xkb_rules" "evdev"
[ 427.639] (**) Option "xkb_model" "pc104"
[ 427.639] (**) Option "xkb_layout" "us"
[ 427.639] (II) evdev: Razer Razer BlackWidow Ultimate: initialized for relative axes.
[ 427.639] (WW) evdev: Razer Razer BlackWidow Ultimate: ignoring absolute axes.
[ 427.639] (**) Razer Razer BlackWidow Ultimate: (accel) keeping acceleration scheme 1
[ 427.639] (**) Razer Razer BlackWidow Ultimate: (accel) acceleration profile 0
[ 427.639] (**) Razer Razer BlackWidow Ultimate: (accel) acceleration factor: 2.000
[ 427.639] (**) Razer Razer BlackWidow Ultimate: (accel) acceleration threshold: 4
[ 427.640] (II) config/udev: Adding input device Razer Razer BlackWidow Ultimate (/dev/input/event17)
[ 427.640] (**) Razer Razer BlackWidow Ultimate: Applying InputClass "evdev pointer catchall"
[ 427.640] (II) Using input driver 'evdev' for 'Razer Razer BlackWidow Ultimate'
[ 427.640] (**) Razer Razer BlackWidow Ultimate: always reports core events
[ 427.640] (**) evdev: Razer Razer BlackWidow Ultimate: Device: "/dev/input/event17"
[ 427.640] (--) evdev: Razer Razer BlackWidow Ultimate: Vendor 0x1532 Product 0x10d
[ 427.640] (--) evdev: Razer Razer BlackWidow Ultimate: Found 3 mouse buttons
[ 427.640] (--) evdev: Razer Razer BlackWidow Ultimate: Found scroll wheel(s)
[ 427.640] (--) evdev: Razer Razer BlackWidow Ultimate: Found relative axes
[ 427.640] (--) evdev: Razer Razer BlackWidow Ultimate: Found x and y relative axes
[ 427.640] (II) evdev: Razer Razer BlackWidow Ultimate: Configuring as mouse
[ 427.640] (II) evdev: Razer Razer BlackWidow Ultimate: Adding scrollwheel support
[ 427.640] (**) evdev: Razer Razer BlackWidow Ultimate: YAxisMapping: buttons 4 and 5
[ 427.640] (**) evdev: Razer Razer BlackWidow Ultimate: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 427.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.2/3-9.2:1.2/input/input17/event17"
[ 427.640] (II) XINPUT: Adding extended input device "Razer Razer BlackWidow Ultimate" (type: MOUSE, id 13)
[ 427.640] (II) evdev: Razer Razer BlackWidow Ultimate: initialized for relative axes.
[ 427.640] (**) Razer Razer BlackWidow Ultimate: (accel) keeping acceleration scheme 1
[ 427.640] (**) Razer Razer BlackWidow Ultimate: (accel) acceleration profile 0
[ 427.640] (**) Razer Razer BlackWidow Ultimate: (accel) acceleration factor: 2.000
[ 427.640] (**) Razer Razer BlackWidow Ultimate: (accel) acceleration threshold: 4
[ 427.640] (II) config/udev: Adding input device Razer Razer BlackWidow Ultimate (/dev/input/mouse1)
[ 427.640] (II) No input driver specified, ignoring this device.
[ 427.640] (II) This device may have been added with another device file.
[ 427.640] (II) config/udev: Adding input device UVC Camera (046d:081a) (/dev/input/event22)
[ 427.640] (**) UVC Camera (046d:081a): Applying InputClass "evdev keyboard catchall"
[ 427.640] (II) Using input driver 'evdev' for 'UVC Camera (046d:081a)'
[ 427.640] (**) UVC Camera (046d:081a): always reports core events
[ 427.640] (**) evdev: UVC Camera (046d:081a): Device: "/dev/input/event22"
[ 427.640] (--) evdev: UVC Camera (046d:081a): Vendor 0x46d Product 0x81a
[ 427.640] (--) evdev: UVC Camera (046d:081a): Found keys
[ 427.640] (II) evdev: UVC Camera (046d:081a): Configuring as keyboard
[ 427.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4:1.0/input/input22/event22"
[ 427.640] (II) XINPUT: Adding extended input device "UVC Camera (046d:081a)" (type: KEYBOARD, id 14)
[ 427.640] (**) Option "xkb_rules" "evdev"
[ 427.640] (**) Option "xkb_model" "pc104"
[ 427.640] (**) Option "xkb_layout" "us"
[ 427.640] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 427.640] (II) No input driver specified, ignoring this device.
[ 427.640] (II) This device may have been added with another device file.
[ 427.640] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 427.640] (II) No input driver specified, ignoring this device.
[ 427.640] (II) This device may have been added with another device file.
[ 427.640] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 427.640] (II) No input driver specified, ignoring this device.
[ 427.640] (II) This device may have been added with another device file.
[ 427.640] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event4)
[ 427.640] (II) No input driver specified, ignoring this device.
[ 427.640] (II) This device may have been added with another device file.
[ 427.641] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event5)
[ 427.641] (II) No input driver specified, ignoring this device.
[ 427.641] (II) This device may have been added with another device file.
[ 427.641] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event6)
[ 427.641] (II) No input driver specified, ignoring this device.
[ 427.641] (II) This device may have been added with another device file.
[ 427.641] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event7)
[ 427.641] (II) No input driver specified, ignoring this device.
[ 427.641] (II) This device may have been added with another device file.
[ 427.641] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event8)
[ 427.641] (II) No input driver specified, ignoring this device.
[ 427.641] (II) This device may have been added with another device file.
[ 427.641] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[ 427.641] (II) No input driver specified, ignoring this device.
[ 427.641] (II) This device may have been added with another device file.
[ 427.641] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 427.641] (II) No input driver specified, ignoring this device.
[ 427.641] (II) This device may have been added with another device file.
[ 427.643] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 428.146] (II) Quirked EDID physical size to 0x0 cm
[ 428.146] (II) fglrx(0): EDID vendor "SAM", prod id 1059
[ 428.146] (II) fglrx(0): Using EDID range info for horizontal sync
[ 428.146] (II) fglrx(0): Using EDID range info for vertical refresh
[ 428.146] (II) fglrx(0): Printing DDC gathered Modelines:
[ 428.146] (II) fglrx(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 428.146] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 428.146] (II) fglrx(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 428.146] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 428.146] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 428.146] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 428.146] (II) fglrx(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 428.146] (II) fglrx(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 428.206] (II) Quirked EDID physical size to 0x0 cm
[ 428.206] (II) fglrx(0): EDID vendor "SAM", prod id 1059
[ 428.206] (II) fglrx(0): Using hsync ranges from config file
[ 428.206] (II) fglrx(0): Using vrefresh ranges from config file
[ 428.206] (II) fglrx(0): Printing DDC gathered Modelines:
[ 428.206] (II) fglrx(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 428.206] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 428.206] (II) fglrx(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 428.206] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 428.206] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 428.206] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 428.206] (II) fglrx(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 428.206] (II) fglrx(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 428.334] (II) Quirked EDID physical size to 0x0 cm
[ 428.334] (II) fglrx(0): EDID vendor "SAM", prod id 1059
[ 428.334] (II) fglrx(0): Using hsync ranges from config file
[ 428.334] (II) fglrx(0): Using vrefresh ranges from config file
[ 428.334] (II) fglrx(0): Printing DDC gathered Modelines:
[ 428.334] (II) fglrx(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[ 428.334] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 428.334] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 428.334] (II)
Maybe you are looking for
-
Query related to inner join V/S all entries........
Hi all, I have a dought ...related to join and all entries Which one will be the better as per performance prospective : 1>For all entries or 2> using inner join condition i am combining 2 tables ... but in my where clause is having 6-7 condition if
-
Zen Touch software and AC adaptor compatible with Vision
I just got the Vision: M and I'm wondering if I can use the software and AC adaptor I got with my previous player, the Touch with the Vision: M.
-
IDES ECC 5.0 database install fails with no errors
I've successfully installed a non-IDES version of ECC 5.0 (central, database, and dialog instances) via Solution Manager 3.2 with Oracle 9.2.0.6 (+patches). I logged in and generated an install key for the IDES installation. The IDES central instanc
-
Extra music tracks from ITunes
Hi, Not sure if this is the right place for this post.... I have successfully made a few AVs via Iphoto / Itunes burned via Idvd, now i am wondering if its possible to get two tracks or more of music from in ITunes instead of one track so my AVs last
-
Solution for XP not recognizing USB device ...
Hope this helps ... here's how I got my XP machine to recognize the IPod. 1) Un-installed all the software (not sure if this was critical, but it is part of the order of events I followed). 2) Next, I unplugged the IPod from my desktop and unplugged