Cintiq 21UX Lines are not smooth in Photoshop CS

Just got my new Cintiq 21ux this week....love it but when using Photoshop CS the lines are not smooth even when I use a ruler etc....have used a tablet for years so it's not practise but the software or something ???.....I do have smooth enabled in the Brush Dialog box so that's not the problem. When I sketch in Alias Sketchbook Pro and Corel Painter IX the lines are perfect and smooth.......Anybody have a similar problem and a solution.....any help would be appreciated...
Cheers Mike
PS
I have already turned off double-click distance and have the latest Wacom Cintiq driver version 6.05 installed
My operating system is Windows XP service pack 2

Hi All thanks for the reply's.....
Dave
* Have reset my Photoshop preferences and same results
* Have reset Wacom preferences and settings as per instruction from Wacom...also uninstalled and reinstalled Cintiq driver
* Have played around with the brush settings...resolution etc etc etc....and no improvement in line quality
* Have also heard from other people with Cintiq having the same issues with Photoshop
* As much as I can tell the mouse looks okay
I think it's a Wacom Cintiq Driver issue as my previous Intuos tablet etc I never had a problem with.
Scott
*Have also learned from others that other Photoshop versions also have same bad line quality....
*Zooming does not solve the problem as I need to see the whole canvas to sketch and you still get the wobbly lines....
Phos....
* If I don't figure this out will have to give a bug report....not exactly sure how to do that though......
The mystery continues

Similar Messages

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Schedule lines are not in sink for PO

Hello Everyone,
We are using ECS.
So we create PO in SRM with some schedule lines and transfer it to the ECC system.
But sometimes the schedule lines are not in sink on both the sides because buyer update the schedule lines on SRM side.
So we need to check that is schedule lines in SRM and Basic quantity in SRM are same or not?
So is there any OSS note to check this?
Regards,
Khushbu.

Hi,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.

Lines are not generated for holidays and sundays

Hi
creating a sale order shcedule lines are not generated for sunday for a particular plant .
Schedule lines are generated for subsequent monday only.
the plant calander is also correct
with regards
partha

Hi
I would really double check the factory calendar ans the of the plant and sales organisation
regards,
Sidi

CC 2014 nik efex - My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either

My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either. Help with this?

BINGO !!!!
Thanks so much Woodsroad. I had the exact same problem with my Dell Windows 7 64 bit with AMD Radeon 6700 Video card.
All the video tests passed with flying colors.
The sniffer rename trick fixed the problem.
Thank goodness for the internet!

Flash files are not smooth

Hi,
I am running DMP 4400G (5.2.3) with DMM server 5.2.3.
Every thing working fine except the flash files. All the flash files are not smooth. They are playing like fram by fram. I am using flash 10.

We've run every type of flash on the 4400. We've tried flash 7, flash 10, flash lite, action script 2 and action script 3. For the most part, flash will *not run smoothly* if:
1. You have very large files, like imported bit map images.
2. Large sweeping motions or tween animation effects.
3. Multiple flash objects on a single page.
4. Video embedded in flash will never play evern remotely reasonably well.
The best thing to do is:
1. Keep flash objects small.
2. Animations should have as few frames as possible, no tween effects, no big sweeping motions, in other words, make transitions small and very quick.
3. Keep flash objects self contained, that is, don't try to pull in too much content from external sources.
Like I said, we've tried so many things, but when it comes to flash, the 4400 is rather restrictive.
Good luck!
-Michael

Secure SIP lines are not supported on the CME

Hi,
I was looking for the configuration of Secure SIP lines on the CME and found in the link bellow that "Secure SIP lines are not supported on the Cisco Unified CME mode", only Secure SCCP lines is supported:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmeauth.html
In my opinion, security is an important subject nowadays and SIP is what Cisco is investing more and more ... it's awkward that Secure SIP lines is not supported on the CME.
Does anyone knows if this will be implemented in future versions of CME?
Thanks.

Just to described the answer that I received from Cisco ... there is a roadmap for FY16.
Regards.

ETD and Base line are not matching

Hi All,
My requirement is in production server, for some invoices the Expected time departure and base line date are not matching,
What will be the reason behind this? Can you please advice how to approach to this problem.?
Thanks in advance
jaya.G

Hi,
could you please eloborate the issue?
Thanks,
Srinu

Raw images are not opening in photoshop nor tiffs with light room adjustment

raw images are not opening in photoshopcs5 nor tiffs with light room adjustment from lightroom3. need help have client dead line for today and monday..please help. thank you nancy

I am too tired to go through all this again with an other forum, I also do not have the time, I must hand in my images monday morning...I will wait till you get back to me...it 8pm brussels time..I will continue working in capture one in the mean time... and hope you can find the answer...thank you for you help. sincerley
nancy

Call on PRI Line are not transfered to IP-AA on CCM

Greetings,
Having an issue with H.323 Voice gateway. Incoming calls are not transferred to Auto-Attendant. This happens randomly but I have noticed that the frequency is higher when there are no incoming call no PRI lines.
(Check the attachments for debugs)
The calls seems to be answered by gateway but ISDN-Connect message is never displayed. I tried to call from my IP Phone to but no ISDN-Connect message for this call, however, the call is landed on gateway. Running CCM 4.2(3), IPCC Express 4.0(4),IOS version 12.4(8) Advance IP Services, tried IOS 12.4(5a) Advance Enterprise Services as well but in vain.
Another questions is that: we can run both MGCP and H.323 on voice gateway but how will it register with CallManager. I guess we can use some loopback technique for this purpose. Need suggestions/comments!!!
Please find the attachments of Q921 and Q931 debugs. Took debugs for 2-scenarios
1- Called from and outside number to PRI line
2- Called from IP-phone to PRI line
Regards,
Syed Khalid Ali

You can refer this guide for more information on configuring loopback for PRI interface:
http://www.cisco.com/en/US/docs/ios/12_2/dial/configuration/guide/dafchant.html#wp1002838

Web Page transitions are not smooth

I just published my new website on web.mac.com/cherisykes and notice that the changes from page to page are not very smooth or prompt. Is there anything that can be done?

The main reason is your choice of the "Darkroom" theme. It uses an image to create the textured background and this increases the download time and is responsible for the "venetian blind" effect as the page loads in the browser.

SMARTFORMS :lines are not printing.

Hi all!
We have a SMARTFORM for outbound delivery.In that items are shown in a table manner with horizontal and vertical lines. Every thing is coming fine while taking print from laser printer but lines are missing when taking print from Dot Matrix printer.Please help where mistake is going on.

Hi ,
Go to SPAD and check if ur device type for dot matrix printer( output devices ) is SAPWIN or not, if it is not ask d basis guy to create an output device with SAPWIN or TWSAPWIN
i think this will solve ur problems
reward if useful,
Cheers,
Deepthee kasal

Graphical mapping issue, repeated lines are not populating

Hello All,
i have mapping where i need to map source node and its coresponding subelements to target node and its subelemtns based on certains condition, which i did using If condition.
Now my issue is, when mapped source node with condition , conditional field is not in the same node which i am mapping. It is in the parent node of the node which i am mapping. SO when i mapped to target node, only one occurence only its populating in target side even When lines repeated more than once its not populating all lines corespondingly. Please let me know how to populate all line items when i have validation field in parent node and child node and its subelemnts to be mapped to the target node. ( Both parent node and sub node in source and target node are unbounded) .
Thanks in advance.
Regards,
Kalpana

Thanks for your reply, My source structre looks like below.
I have to map rows node and its coresponding fields to target node Lines which is unbounded and to its subelements when collection name = 'MATGRP_COLLN'. I did it using if condition but , only one row tis getting populated in target LIne node. next repeated row values are not populating in target side.
- <extensions>
+ <collection name="REGION_COLLN" />
+ <collection name="DIVISION_COLLN" />
+ <collection name="DTL_PRCNG_COLLN" />
+ <collection name="COUNTRY_COLLN">
- <collection name="MATGRP_COLLN">
- <row>
- <fields>
<OBJECTID>-2147483540</OBJECTID>
<UNIQUE_DOC_NAME>-21474835401248121690973</UNIQUE_DOC_NAME>
<DISPLAY_NAME />
<MATGRP_ITEM_NO>1</MATGRP_ITEM_NO>
<MATGRP_NAME>10100000</MATGRP_NAME>
</fields>
</row>
- <row>
- <fields>
<OBJECTID>-2147483539</OBJECTID>
<UNIQUE_DOC_NAME>-21474835391248121706160</UNIQUE_DOC_NAME>
<DISPLAY_NAME />
<MATGRP_ITEM_NO>2</MATGRP_ITEM_NO>
<MATGRP_NAME>10101500</MATGRP_NAME>
</fields>
</row>
</collection>
</extensions>
</object>
</objects>
</fcidataexport>

Some lines are not scaled right when resizing

Hello people,
I recently have made a drawing in Illustrator CS5 of a certain vehicle. This size of the drawing is 2600 x 2583,5 px in a resolution of 72ppi for use on the web.
Now I want to use this drawing on a website but therefor it needs to be resized to 160 x 146 px. When I scale down the drawing to the desired size there are some lines that aren't scaled down properly relative to the other lines. These lines become a stroke of 1pt and whatever I do, the stroke of these particular lines can not be sized to a value below 1pt.
I have enabled "scale stroke & effects" in the preferences, unlocked all objects and most of the strokes are scaled down fine apart from a few wich will not be scaled below 1pt.
Does anybody have a clue wat could be the cause of this?
Greetings,
Erik

Thanks! The whole drawing is being scaled down correctly now.
Greetings,
Erik

Treasury Module: Multiple Excel Lines are not copying to SAP

Hi Experts,
I am facing a peculiar problem in Treasury Module.
The details are as below:
1. Transaction Code FTR_CREATE: I am providing all the details then go to interest condition. Here I am going to provide manually the interest amount.
2. In update Paragraph, I choose "Special" button & select "Single Dates". Here I can provide Date & amount manually. But system is allowing only one line at a time from the excel sheet.
That is a big bug in system or my laptop.
I need help from all of you because of this my go live stuck in between.
Please help.
Thanks,
Satya

Hello Niels,
I am very interested in having a deeper look at the example:
Concerning the "passive" issue I have the following question/note:
- Do you see the same behavior when you do a "quiet" install instead of a passive one?
- For some reason this makes me think about a bug in Visual Studio (old version) that I also personally experienced some time ago, but I do not think it is directly linked.
I did a quick google search and this is what I could directly find back about that bug. (http://community.flexerasoftware.com/archive/index.php?t-154037.html)
Do note that I am not sure that it is linked to the issue. To be able to give some more feedback I would require the modified example that you are using.
Concerning the uninstall process:
- Can you share the modified version of the community example you are using? (to be able to reproduce exactly the same issue)
- The most common reason I know off that might cause files to not uninstall is that the linked GUIDs are causing "issues".
Changing the GUIDs of the files/components that are not uninstalling might do the trick in that case.
However, to have some certainty about this I should be able to have a look at your code (and test it)
Kind Regards,
Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
CLD, CTA
If someone helped you, let them know. Mark as solved and/or give a kudo.

Cintiq 21UX Lines are not smooth in Photoshop CS

Similar Messages

Maybe you are looking for