Cipc Configuration Call Center Enviorment

Hi,
We are thinking deploying a Cipc in call center enviorment with extension mobilty . Actually i have configured one which works fine if i use agents Id under device name, login/logout service works fine. Then we have Call recording(QM) where i am very confused it is not picking up the device name which in this case is agents name instead of MAC. let say if use a MAC instead of agent Id in configuration. The login service do not work.
i know there a lot people out there using CIPC in contact center. Please advise me how to configure one.
Thanks

I think they have auto registration on in their Cm . So what i did is install a soft phone on the machine and let it auto register and copied the mac. I was able to configure login service it was not enabled on the device. I have to configure 80 phones what is the easiest way? If Bat these phones in the system it will not give the mac to to configure. Or it will be better to hard code there lines and take the UDP out. Since soon they will have laptops for work.

Similar Messages

How to Integrate Oracle Access Manager 11g with Siebel Call Center 7.8

I need to change the DB authentication to SSO for Siebel Call Center 7.8. I just found a document about integrationg OAM 10g with Siebel 7 (http://download.oracle.com/docs/cd/B28196_01/idmanage.1014/b25347/siebel.htm#Siebel). However, because it's mandatory to use OAM 11g, I don't know whether this doc is suitable for Siebel 7.8. In addition, is it the right way to configure Siebel SSO? I know, in this way, I need to install WebGate. Please give me some expertise. Thanks.

This should work as long as your web server and operating system support 11g. There may be some differences in how to set up OAM and the WebGate in 11g versus 10g (that is not my area of expertise), but from the Siebel side the integration is the same. You would pass in the user's Siebel ID (pulled from the LDAP directory) as an HTTP header. Then you just need to tweak a few of the parameters in Siebel:
For the Security Adapter Profile (LDAPSecAdpt most likely) you are using, set:
SingleSignOn = True
TrustToken = HELLO (or whatever value you choose)
In eapps.cfg or eapps_sia.cfg in the virtual directory section for the specific application object manager (e.g. [sales_enu]) set:
UserSpec = SIEBEL_USER (or whatever HTTP header name you set up in OAM)
UserSpecSource = HEADER
SingleSignOn = TRUE
TrustToken = HELLO (or whatever value you selected for the Security Adapter profile TrustToken parameter)
ProtectedVirtualDirectory = /sales_enu
The protected virtual directory will normally be the same as the virtual directory (in this example /sales_enu) unless you are using customer facing applications with anonymous browsing capabilities (for example a catalog that goes to a shopping cart at some point in the process).
Also in the [SWE] section of the eapps.cfg file the IntegratedDomainAuth parameter should be set to False.
Hope this information is helpful.
Best regards,
Stevan

Oracle SOA Integration with Siebel 8.0 Call Center Application

Hi Experts,
I am trying to Integrate Oracle Fusion SOA and Siebel 8.0 and I have been following http://download.oracle.com/docs/cd/E17904_01/doc.1111/e17056/bpel_pm.htm as a reference.
Here is what I have done so far:
Created an Inbound Web service (Account Web Service) by login into Siebel Call Center Application. I was able to generate the WSDL file successfully. This WSDL has following operations :
(a) AccountInsert
(b) AccountQueryByExample
(c) AccountQueryById
If I understand it correctly, this is like any other wsdl file which can be consumed and operations can be invokved by consumers (web service clients)
I have couple of doubts/questions :
(1) Once WSDL is generated by the Siebel Client, it can be used in my BPEL process/composite apps to perform the integration. If this statement is true, why and where do we need Siebel Adapter?
(2) While I was following the online tutorial @ http://download.oracle.com/docs/cd/E17904_01/doc.1111/e17056/bpel_pm.htm , I can see, WSDL was generated by using the Application Explorer (a swing based tool provided by Oracle as a part of Adapter framework). But I have used Siebel Call Center to generate the WSDL file. Which is the standard way of generating the WSDL file?
(3) In the tutorial mentioned above, I can see request and response xsd files (i.e queryWithView_invoke_request.xsd queryWithView_invoke_response.xsd) . No where in the tutorial has mentioned, how these files were created. Are these hand written files by the developer, or it is something that can be created out of the wsdl itself?
(4) Also, there is a .jca file (queryWithView_invoke.jca) which is also being used while configuring the Third Party Adapter. Where does queryWithView_invoke.jca come from? Is it something that is created from Application Explorer?
Would really appreciate if someone can throw lights on these gray areas....
Waiting for an eagerly reply...
Thanks in Advance !
Jameel

Hi,
If you are talking about configuring the outbound WS , then you need to go to Siebel > Administration-Webservices> Outbound Webservices
Query for webservices there and give the <HOST>:<SOA PORT> in the URL.

FSCM Biller Direct Call Center Payment Log

Hi,
We are using Biller Direct and Biller Direct Call Center for our dealers/customer AR processing.
Biller Direct is used by our Dealers to see their account balance and post payment online through Biller Direct web portal.
Biller Direct Call Center is used by our Account Receivable team to see our dealers account balance and to post payment with authorization from our dealers.
The main question is:
How can we see the deatilpayment log/detail on transaction posted through Biller Direct Call Center? Our AR team needs to identify which user from AR team that perform a specific payment. Please advise.
Is this something that can be setup through XCM or R/3 configuration?
We need to get the detail of "User ID" and "Date & Time" that a payment is done through Biller Direct Call Center.
I tried to look from the document changes on AR line item detail of the billing document that got paid. But, the document changes is only showing that user BD_POOL made the payment posting. The user id is setup in XCM for posting any transaction into R/3.
Appreciate your help in advance.
Thanks,
Markus

Mohit,
Let me try to answer your questions:
u2022 What accounting entries are passed from SAP perspective and at what points in time?
A) SAP will post a CREDIT to the Customer AR item and a DEBIT to a Credit Card Receivable account when the payment is posted in FI. The DEBIT to the Credit Card Receivable account is included in the nightly Settlement run to be sent to the Processor for a deposit request.
u2022 How are charges levied by banks / financial institutions handled or can be handled?
A) There are Processor charges for authorizations and other services such as Fraud checking as well as the INTERCHANGE fee that is a percentage of the Settlement amount. This could be anywhere from 1.5% to 4% of the Invoice amount depending on the type of transaction and the agreement with the Processor.
u2022 How any fees / charges imposed by network processors / clearing houses handled on a transactional basis?
A) The processor will assess and collect these fees, typically on a monthly or daily basis and provide reporting to the Merchant regarding the fees charged.
u2022 Is this something which Standard SAP Config can accommodate and if yes where exactly? If not what custom development route is appropriate?
A) Standard SAP does not have the ability to assist with Settlement reconciliation or recognition/assignment of processing fees. This must be accomplished through Manual postings.
u2022 Does addition of third party providers like pay metric for interface plug-in help in segregating and processing of credit card charges any better?
A) Yes, ISVs such as Paymetric which provide integration between SAP and the processors do provide additional SAP and external reporting and functionality to assist with the reconciliation process and in determining the processing fees.
Regards,
Eric Bushman
VP, Solution Engineering

Listen to conversation in a call center

Hi and thanks for your help!
I would like to know if this is possible to listen to a talk between a customer and a employe directly from a phone that is own by a supervisor?
I have seen this:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/uc_system/UC6-0-1/features_apps/CMmonrec.html
witch is a method to do the above , but it require a program on a PC or it record the line.
What we would like is to listen to the line that is in use by a agent inside the organisation by a phone like you would do on an analog phone went there is 2 phones and by the simple way of grabbing it you could be able to listen to the conversation.
The client is using a Cisco UC520 Phone with SPA 500 series phones.
thanks alot.

Hi Simon,
That's a feature mostly use by Call Center but CME has feature called Barge to be able to force a conference between two phone but both phones need to have a share line.
The best way is to use UCCX (Contac Center Express), it has a feature called Silent Monitor to be able to listen calls from agents:
Silent Monitoring. CSD allows a supervisor to silently monitor agent calls. It can be configured whether the agents are aware or unaware that they are being monitored.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_9_02/design/guide/UCCX_BK_C39FDB35_00_cisco-unified-contact-center-express/UCCX_BK_C39FDB35_00_cisco-unified-contact-center-express_chapter_01.html
Regards

Make the best choice when choosing a call center software

I want to help anyone who has problems in deciding what call center software best suits him in their company. You can see the latest software products, reviews, features to base on and much more useful information
http://www.iterating.com/productclasses/Call_centre
If you have any questions please feel free to ask

Hey guys,We're in a fortunate licencing position, whereby we could be compared to kids in a sweetshop with Microsoft products. And my predecessor took advantage of that massively. However, our parent company foots the bill and now want us to stop using SCCM.I personally am not familiar enough with it to call myself competent in it's use and the previous guy tried to use it to push out images to PCs etc but failed.I am now in a position, whereby I need to get rid of this and I want to start using WDS.I have a fresh Server 2012 R2 box with WDS installed. I've configured it, so it should work fine.
I think I have found the one place in SCCM where I stop telling it to process PXE requests and so have stopped that.However, whenever I get a machine to PXE boot, it still looks to that old SCCM box. And if I press F12, it boots from it.Anyone...

Partner search in Call Center

Hello
We are using Call Center and IVR.
In the IVR customers are entering object ID that later is used to locate the partner via installed base.
The info transfered to the CRM using CAD.
My question is how to configure the Call center profile, to search for partner number using the object ID of installed base object.
Thanks Nachshon.

This is something that you can do .
i) Create a Call List with Assignement to the IC Orgnanization ( So that IC Agent can see it )
ii) Call List have assignment of Calls , with each individual Call Linked to a Business Partner and IC WebClient Script
iii) The IC Agent will Navigate to Call List View
iv) Pick a Call from the Call List and Initiate a Outbound call
v) The Associated Script is trigerred
vi) The Interactive Script have a Step that is linked to the Survey Questionnaire
vii) Based on the Survey Response , set marketing attribute to be added to a Target Group based on Segmentation etc ...
Hope this helps in forming the design. You can try this , if you have questions around config I can certianly help.
Edited by: SKP on Mar 24, 2009 6:11 AM

The inbound calls to our call center is drop after putting it on hold or transfer

Dear All;
Good day
The inbound calls to our call center is drop after putting it on hold or transfer the call to another agent. The MOH file is playing till 21 sec only then call drop . the agent cant resume the call again. The MOH file is running from Gateway (multicast).
No problem in outbound calls.
I urgent need you help
Should you require any more information , please do not hesitate to contact me.
Thanks & Best Regards,
Muhammad Fathy,
IT Network Manager
ALEXBANK
A subsidiary of Intesa Sanpaolo Group
Head office: B210-F1, Smart Village , KM 28 Cairo-Alex Desert Road, Egypt.
Cell:      +201017288844.
Office: +202-35311300   Ext: 8090.
eMail:   [email protected]
i To maintain a paperless environment, please don't print this e-mail unless you really need to.

Typically you have a codec or media resource issue to track down. IE, MTP, region, location, gateway trunk to trunk to call or something in that area.   Bypass UCCX and do the same call without this app... does it happen with a normal call?

How to send a Announcements in CRM WebUI for Call center role.

Hi
In some cases if we are shutdowing the prodcution server we want to send a group message to all the users in call center.
How to do this.
Please suggest.
Regards
Hanu M

Hi,
in the IC_Webclient and in the CMS-Role you could use broadcast messaging for this.
your message is displayed on the bottom of the screen as ticker.
Add in SAPGUI a new favorite
BSP-Application: BSP_BROADCAST
Start-Page: abap_broadcast.htm
Kind regards
Manfred

I am working from home in virtual call center. I urgently need Firefof 5, all above cause problems and crashes. Can you please advise how I can download FF 5, it is urgent. Thank you.

I was running Firefox 5 and have been able to protect it against new versions, but now I am not being warned that there is a new version being snuck in without telling me about it.
The problem is that I work in a virtual call center from home, and the new version is creating problems I never had before.
Is there a way you can supply me with a link to FF5, and how do I protect it against new versions being installed on my machine. This is extremely important as I earn my living from the call center.
Thanks and look forward to your reply.

Perhaps you've already fixed this, but the first two links you showed us do work fine in FF and IE8, I can not say about the third link as I did not see it on your page.
Are you still having trouble with this?
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

FTE and volume based billing for a call center operations

hi,
we have a call center handling operations only for intercompany customers (means no external customers). And we want to go for a solution based on two business processes. first one is FTE (Full time equivalent) and the second is volume based billing (based on how many tickets received between a time period).
The solution approach will be to create cost centers to track costs and billing through normal SAP sales order.
Can anybody guide me through the process here with some explanation or documentation related to this?
Thank you all

hi,
this is to inform you that,
create a master contract - 1st step.
create a value and a service contract - 2nd step.
link this two low level contracts to master contracts.
different pricing procedures will be there for value and service contracts each.
the process flow of this is :
1. for value contract : MASTER CONTRACT - SALES ORDER - DELIVERY - BILLING.
2. for service contract : MASTER CONTRACT - SALES ORDER - BILLING.
hope this clears your issue.
please let me know if you have any doubts on the same.
balajia

How to stop Call Center Agents from Moving Headsets around

We are call center with about 200 agents at a time in the building. We go thru headsets like they are candy. But we just got told to no longer use cheap headsets. So we are slowly cycling in the new headsets. So any Ideas on how to keep headsets from moving stations. Our agents destroy headsets anyway, so I don't know how well these new ones are gonna last. They also move keyboards, mice as well. They have very little respect for the equipment and think breaking them is going to give them a new one faster. Let me know what you guys think.
This topic first appeared in the Spiceworks Community

I think you are seeing what is called the Ken Burns Effect. You can change this setting using the Rotate, Crop, Ken Burns Tool on the middle toolbar. You can select Fit, Crop, or Ken Burns. Fit will make your photo fit by letterboxing. Crop will make your photo fit by cropping the top and bottom off. Ken Burns allows you to Pan around. You can set the starting and ending rectangles for the pan.
Also, if you go to File/Project Properties you can set the default action for "Initial Photo Placement" to Fint, Crop, or Ken Burns.

Call Center Agent's Need to See Sent Mails in Their Inbox

Hi Gurus
I am looking for a way to allow the sent mails to be seen and viewed in the Call center agents inbox on the Web UI.
We are using EHP1 is the above mention possible for us?
Many Thanks in Advance
Vikas

What about sending them to himself as BCC automatically? That would be a small change.
Best regards,
Thomas Wagner

New iphone 6 with ios 8.0 crushed and didnt open again. call center told me that use itunes to update 8.0.2 but server is too slow and didnt let me download it. it stopts in the middle of the session. how can i download it from another link or server

new iphone 6 with ios 8.0 crushed and didnt open again. call center told me that use itunes to update 8.0.2 but server is too slow and didnt let me download it. it stopts in the middle of the session. how can i download it from another link or server. by the way i try to dowload from turkey.

anyone help me there? )=

Install and Configure Ops Center for monitoring

Dear All,
Any one used to Install and Configure Ops Center for monitoring all Servers?
Please kindly give advice for this.
Thanks and regards,
Heng

Dear All,
Any one used to Install and Configure Ops Center for monitoring all Servers?
Please kindly give advice for this.
Thanks and regards,
Heng

Cipc Configuration Call Center Enviorment

Similar Messages

Maybe you are looking for