Cirrus Logic CS 4614 audio device no support (thinkpad laptop)

Greetings,
I'm having trouble Solaris 10 3/05 x86 ; Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator]
bash-3.00# /usr/X11/bin/scanpci
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x7190
Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x8086 device 0x7191
Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
pci bus 0x0000 cardnum 0x02 function 0x00: vendor 0x104c device 0xac1b
Texas Instruments PCI1450
pci bus 0x0000 cardnum 0x02 function 0x01: vendor 0x104c device 0xac1b
Texas Instruments PCI1450
pci bus 0x0000 cardnum 0x03 function 0x00: vendor 0x10b7 device 0x6056
3Com Corporation 3c556B Hurricane CardBus
pci bus 0x0000 cardnum 0x03 function 0x01: vendor 0x10b7 device 0x1007
3Com Corporation Mini PCI 56k Winmodem
pci bus 0x0000 cardnum 0x05 function 0x00: vendor 0x1013 device 0x6003
Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator]
pci bus 0x0000 cardnum 0x07 function 0x00: vendor 0x8086 device 0x7110
Intel Corp. 82371AB/EB/MB PIIX4 ISA
pci bus 0x0000 cardnum 0x07 function 0x01: vendor 0x8086 device 0x7111
Intel Corp. 82371AB/EB/MB PIIX4 IDE
pci bus 0x0000 cardnum 0x07 function 0x02: vendor 0x8086 device 0x7112
Intel Corp. 82371AB/EB/MB PIIX4 USB
pci bus 0x0000 cardnum 0x07 function 0x03: vendor 0x8086 device 0x7113
Intel Corp. 82371AB/EB/MB PIIX4 ACPI
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x5333 device 0x8c12
S3 Inc. 86C270-294 Savage/IX-MVEdited by: hede1 on Sep 6, 2010 6:07 PM

Snowman wrote:IIRC, without the sleep 5, the module is loaded but you end up with muted sound level. It seems that the problem is that udev hasn't yet created the sound devices when the alsa script tries to restore the sound volume.
I don't know if it has been fixed. Maybe moving alsa to the end of the DAEMONS array will give more time to udev to create the device so the sleep 5 won't be necessary anymore. I might test that out.
Sounds about right. I reinstalled Arch and did not add sleep 5. Now the volume is muted at startup

Similar Messages

Logic Pro x audio device turned off

Hello
i keep getting a message when turning on the imac that " pro logic x audio device is turned off"
and then I get no sounds what so ever from logic arranged window...
logic preference "built in output " is selected as usual ..
midi activation is visible but no input activated...
after fiddling about for a while it's all ok again
anyone???

In Logic's Audio preferences, make sure CoreAudio is checked....

No sound/audio device on older HP laptop

my hp laptop (i shpuld have more detail but sorry don't at present) windows XP , has just decided e it does not have an audio device installed. i can't hear anything. why? Would i /Could I have inadvertently removed the driver /device when i was removing unwanted programs recently. Please help. Thansk Jane

Hi Maliha,
I followed your instruction to execute the exe file under C:\Drivers. After that, I rebooted the system and no more error pop up for the missing audio device. I checked the Device Manager and the Audio Device on High Definition Audion Bus disappeared and the SoundMax was shown. But again, still no sound. I clicked on TroubleShooting on that SoundMax and followed that instruction. I found out the default Sound device was erroneously pointed to BlueTooth. I made the change to SoundMax and voila ... the sweet ding sound came back.
That was a wonderful feeling to be able to fix this nagging problem that my company HelpDesk could not help me. All thank to this forum and particular Maliha. Again, my appreciation to the valuable help.

I installed Maverick an hour a go.My IMAC was on 10.6.8 before.I need to update because I like to Install Logic PRO X . Now my MBOX2 Pro is not recocnised by the System. AVID does not deliver 10.9 drivers. Wich Audio device is supported?

IMAC runs fine using Maverick 10.9. >>>> But ( I'm a musican )
Since Installation , which I needed to be upgraded for use of LOGIC X , it does not connect my Mbox2 Pro ( AVID ) anymore.
Is there an alternative Sound Audio and MIDI device that will run under Maverick ?
please advise

Hello Gweedo888
Yo did not answered my Question.
I found the AVID Page,- Yes, and I kwow this fu..... helpless statement : " won't work ".
My Question was :
Is there an alternative Soun and MIDI device that will run under Maverick.
I neded to Install 10.9 becouse I want to run / install Logic X.- that reqieres at least 10.8.5

Current selected audio device not supported by applicat

Hi there,
I updated my sound drivers today using the autoupdate feature on the creative website but now the console and volume panel won't work, I just get the error reported above. Can anyone help please?

Bump, this hasn't been resolved, I can't access the panel. What specific steps are required? Tx.
Note, I managed to configure horrific IE to allow the autoupdate, but no change, I still get the same error message. Recent Dell, XP pro, Soundblaster X-Fi.
Message Edited by zorro6204 on 2-0-2008 08:33 PMMessage Edited by zorro6204 on 2-0-2008 08:33 PM

Cirrus Logic snd-cs46xx - No soundcards found [Solved]

I have a new Thinkpad T22.
alsaconf successfully finds my Cirrus Logic CS 4614/22/24 Card, however, I need to load snd_cs46xx manually.
After loading the modules, it is visible under lsmod.
/etc/rc.d/alsa start give me an output of:
/usr/sbin/alsactl: load_state:1236: No soundcards found...
Any ideas will be appreciated

Snowman wrote:IIRC, without the sleep 5, the module is loaded but you end up with muted sound level. It seems that the problem is that udev hasn't yet created the sound devices when the alsa script tries to restore the sound volume.
I don't know if it has been fixed. Maybe moving alsa to the end of the DAEMONS array will give more time to udev to create the device so the sleep 5 won't be necessary anymore. I might test that out.
Sounds about right. I reinstalled Arch and did not add sleep 5. Now the volume is muted at startup

The new 338S0987 chip from cirrus logic has inferior sound quality to the old cs42L61 chip. Can the 338S0987 chip be improved?

The new 338S0987 chip from cirrus logic, used in the new 4s has inferior sound quality to the old cs42L61 chip found in the 4 and 3G. Can the 338S0987 chip be improved?
The new chip is very compressed and has hissing artifacts. It sacrifices sound quality for reduced energy consumption. This is a problem for me because I am building a musical instrument app that is adversly affected by the new cirrus logic chip. Audio fidelity is suffering.
Is there any chance for a software/driver tweak of this chip, or my I please request an improvement on the next iphone model?
Durian
SongbirdOcarinas

You are not addressing Apple here. This is a user forum.
http://www.apple.com/feedback

No audio devices are installed

Hi everyone,
So there's a white x on a red circle on my volume icon. I've had this problem for about 3 months now and have not found any solution. I haven't had the chance to seek professional help so I figured I'd get some help here. I've matched the model/type of my laptop to get the needed audio device/codec for my laptops, there were 3 and all failed to download. I tried click on the x of my volume icon, it told me that hardware changes are detected but there wasn't any solution given. I basically searched every solution there is when it comes to not having an audio device and all have failed.
On my device mananger under sound, video games & controllers, there is an exclamation mark on Conexant High Definition SmartAudio hd2. What does that mean? If I do uninstall it and try to download it from here, I know it will fail because that's what's been happening.
My laptop model is dv2550se Special Edition - 64-bit Vista.

Wow, never mind. I totally solved it just now and I have no idea how. 3 months of figuring out. I'm am crying tears of joy right now.

Why are no audio devices detected? (may involve Cirrus Logic CS4206A (AB 11) )

this is the last problem i have with boot camp. I finally managed to run the boot camp driver install thing, which fixed all the driver problems except that i still have no sound, i have tried the built in speakers, headphones, and some external speakers, but none of them are detected. Also, the sound works fine in Mac OSX mode, just not in windows.
I have Windows Vista Home Premium 32-bit, so i would probably need the drivers for that OS

I solved this on my laptop just now, but not quite sure how.
I uninstalled the driver, and clicked the checkbox when uninstalling the driver to delete the files.
Then, after rebooting, it worked. I suspect it worked because I had earlier installed other drivers, which it then defaulted to. I installed the realtek audio drivers off the Mac OS X cd, but I suspect that wasn't it.
I installed cirrus logic drivers from here:
http://www.cirrus.com/en/support/lic/lic3.html?uri=/en/pubs/software/CS4207WinVista_Win7_32-64-bit6-6001-1-21.zip
Or maybe it was the vista drivers I got from:
http://www.stuffedcow.net/macbook_audio
Or maybe these two sources drivers' are the same - and I did just get it from the cirrus site
If you get it working, I recommend you reply here and state exactly what it was that got it working for you. Just make sure to uninstall the driver and in doing so delete the files too (there's a checkbox in vista). This way it will default to what appears to be older drivers if/when you install those.
Message was edited by: Tennoku

Incomplete ALSA support for Cirrus Logic CS4206 chip?

Hey gang! First a bit about my system. I'm running the 2.6.35-ARCH kernel on my macbook pro 5,5 which has an HDA NVidia soundcard with a Cirrus Logic CS4206 chip. I have my audio playback working through ALSA (arch packages alsa-lib, alsa-oss, alsa-utils, alsa-plugins) and have installed jack2-svn, qjackctl, and ardour3-svn.
My goal for the time being is to be able to track on ardour, recording from my internal mic. (I have an audio interface but no other mic at the moment) I know this is less than ideal but I just want to be able to record so I can start learning ardour while I save for a mic
My Problem seems to be with ALSA. I can get my jack server up and running, and Ardour recognizes it and makes the connection. (unlocking my memory is something else I need to figure out). Ir have tried every combination of input/out configurations for my master, and initial audio track but I when I do hear input from my mic it always is with the same quirks. There is a large amount of hiss and distortion of with audio, the level meter never changes as if ardour doesn't think anything audio is playing, and when ardour records this distorted input no waveform is shown but the sounds do playback (and once again no movement of the level meters).
Now this is what my alsamixer looks like with F5 (view all):
http://img101.imageshack.us/img101/6092/alsamixer.png
It would seem that I have no input device selection abilities in the mixer. I can change the the volume of capture and turn on and off the left and right channels of the capture. (in the screen I understand that only the left channel is on. it just created less distortion this way). But the same problems persist in ardour. Obviously wrong somewhere in this chain of processes!
Does anyone have any ideas? Thanks so much for your time!

ok.. problem solved, had to reinstall alsa and then pulse audio and again start playing with things with alsa mixer like nagoonee recommended,
thanks !

No sound at all - "THotkey message: Audio device is not supported"

Device Manager lists: Legacy Audio Driver and says the device is working properly. Yet I have no sound, and I have troubleshooted from almost every angle - even tried to download a new driver (RealTek) and still nothing.
My laptop is a Toshiba Satellite Pro S300M and I have Windows XP Pro.
Each time my computer boots (and this doesn't happen in safe mode) two messages appear:
THotkey: This Audio Device is not supported
and
TouchED Error
Retrieval of HotKey Failed
Error Code: 0x00031402, 0x00000002
And...as per "Jerry's" advice, I downloaded the HotKey utility and the util common modules. Still nothing. No sound.
Help ?
Thanks,
S

I know this is an old post--but I came across it when I had the same problem in 2013, so I am posting the solution I found to the problem. I found that the following things resolved the problem. First--for the Thotkey problem. Turn off the hibernate option. You do this by using the power option (Settings--Control Panel--Power Options--Hibernate tab--unclick the Enable Hibernation box) and then restart your computer. For me, this resolved the THotkey message, but still no sound. Then, to resolve the no sound problem. My Satellite Pro S300-EZ1514 has a key sequence that turns speakers on and off. The ESC key shows a picture of a speaker with sound waves, a slash, and a speaker. By hitting the FN key and the ESC key together, you toggle the speakers off (a grayed out speaker image) and on (a yellow-colored speaker with sound waves). Make sure you have the speakers on (the colored image). Unfortunately, I found this solution after I had uninstalled Realtek Audio Device--downloaded new drivers--and basically spent A LOT of time researching.

How do I use 2 Core Audio devices at the same time in Logic w/out switching

Hello, I use the Aardvark Direct Mix usb3 as my audio interface for mic and guitar. I just upgraded to Logic Pro 7 today and was hoping someone could tell me how I could use the Built-in Audio Core Audio driver along with the Direct Mix USB Core Audio Driver at the same time without having to switch Core Audio Driver's and than rebooting Logic. It is very frustrating doing that as well as not being able to hear my Logic audio during playback/record mode when I am trying to record via the USB3. WHat can I do? Thanks! If ther are both core audio, why can I not just use both of them at the same time? Why must a switch back and forth? Thanks!
[email protected]

THanks everyone! awsome article! Thanks for posting it, nh!
The weird thing is, once I go up to the Menu and select Open Aggregate Device Editor in the AUDIO/MIDI setup utility and try to add a new Aggregate Device setup (step # 6 from the link), the only audio device available is the "Built-in Audio". What's weird is when I have the main Audio MIDI Setup utility open, every single drop-down menu/tab has the "Direct Mix USB 3 1.0.9.1" device right beneath the "Built-in Audio" option. To me that says that the core audio device is indeed recognized by my computer (obviously since I can record with it using Logic). Can anyone help me with this one? Any suggestions?
Not that it should matter but, the hardware audio interface that I am using is made by the no-longer-existant company once known as Aardvark. I actually had to purchase a third party Core Audio driver just to have it recognized by OS X.
This is the website where I purchased my audio driver :
http://www.usb-audio.com/
A little more on how this device and it's core audio driver function within Logic . . . (Hopefully this might clarify something I may be screwing up) . . .
I launch Logic with its default Built-in Audio which allows playback of audio from the app. I than go up to Audio Hardware and Drivers and than drop the flip down Driver menu down to the second option, "Direct Mix USB 3 1.0.9.1." Logic than prompts me that I should try to (re)launch Logic Pro to load the appropriate CoreAudio.. I do that. Now I am ready to record guitar through the Direct Mix USB3, I just can't hear anything (unless I use head phones as an output from the Direct Mix).
Anyway, you all probably already knew what I meant so explaining that was pointless. But my question is, if the Driver is obviously recognized by my comp in both the Audio MIDI Setup and in Logic, than why won't the Direct Mix device show up as a possibility for setting up an aggregate device? Any suggestions? Thanks!
Power Mac G5 Dual 2.7Ghz 4.5gigs of RAM Mac OS X (10.4.7)
Power Mac G5 Dual 2.7Ghz 2.5gigs of RAM Mac OS X (10.4)

Could not find supported audio device in AA3

okay so i know its not a good idea to use AA3 with Vista...but other people are doing it so why can't I? I've seen the topic posted before but the threads are pretty much dead and I still have no helpful info. I've scoured this thing with no affective solution. I've installed AA3 on several systems in the past and never had this much trouble--if any. This problem has gone on for over 2 months now!
Since I installed AA3 on my new computer all i can get and all i have ever gotten is the "AA could not find a supported audio device. Please check device settings" dialog--
press okay (or x) and Audition closes---never getting past the loading window --during "initalizing required components"
I have 3 audio devices/ with up to date drivers which all my other audio programs recognize (Audition 1.5, Sonor, Cubase + more) with no problem whatsoever--
AA3
Windows Vista SP1 64 bit
Realtek HD Audio
+ Presonus FP10 digital firewire interface/preamp (kind of unrelated but aa3 still wont recognize it either apparently)
I have installed all updates including the 64-bit SP1 fix for AA3.
I've read the Realtek HD issue solutions and made sure my drivers are fine.
IM DESPERATE----PLEASE!!!
I'm having a recording studio built right now & AA3 is my main DAW so this is rather dire.---All the other DAW's i've tried suck compared to AA3 (with the exception of stability). hehe AA3 is always crashing on me and yet i still prefer it over other DAW's.

I put the PreSonus StudiLive 16.4.2 plus Adobe Audition 3 setup instructions into a short write-up on my blog: Live Event Multitrack Audio Capture
Here is a photo showing how to set up the Firewire channels for input and output
I hope this helps:
Ron Fredericks
LectureMaker, LLC

After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet

after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.

ERROR The Audio Device supported by this application is not detected. the application will ex

Sound is fine but I get error message every time I try to start any of the creative applications that come in mediasource like the graphic eq, speaker settings, surround mixer, EAX and THX consoles; the error: The Audio Device supported by this application is not detected. The application will exit.
I have read the forum notes on this error message and seems other have had this same issue, but I don't see any solutions...if anyone knows anything about solving this little mystery, please reply - need to get into that console to fully utilize this sound card.

AFTER AUTOUPDATE this problem began. I removed the audigy package and reinstalled everything from the factory CD and still get this message. This happens every time I update the audigy drivers and thx. I am tired of doing recoveries to get audigy to work. Too bad I keep forgetting that the updates cause this problem. Audigy Platinum 2 works fine wothout the update. I will never update again!
How can I resolve this problem short of a full recovery?

Cirrus Logic CS 4614 audio device no support (thinkpad laptop)

Similar Messages

Maybe you are looking for