Cirrus Logic CS4206 (AB 18) Windows doesn't work with iMac 21,5" i3 3,2 GHz

Hello everybody,
I have a problem with my driver for audio. My Cirrus Logic CS4206 (AB 18) doesn't make a sound. I installed the drivers from the Mac OS X INSTALL DVD again. But noting happend. There is a error code 37. I don't know what to do! I am really desperate. I tried to deactivate the Cirrus Logic CS4206 (AB 18). But nothing happened again. Please tell me what I have to do, that I get some sound out of my iMac. I am using a iMac 21,5" i3 3,2 GHz with Windows Vista 32 bit. Please help me. It is very very urgent!!!

Same problem here, did you find any solution? The sound card isn't detected and the windows update says the drivers are upto date.

Similar Messages

  • PSE 8.0 Windows serial number work with iMac?

    I recently purchased PSE 8 for Windows, and so have a legitimate product key.
    However, last week I bought an iMac for photo editing, and I plan to couple Lightroom 2 for my raw conversions with further mods in PSE (can’t quite justify CS5).
    What I’d like to know is... if I download PSE 8 onto my iMac, will my Windows product key work?  And if not, is there anything Adobe are prepared to do to switch across?
    The Windows laptop won’t be used from now on, so all my editing is being done on the iMac

    No, but you can crossgrade. Contact Adobe sales (not technical support) and they will switch you over to the mac version for a minimal charge, just shipping and handling.
    (BTW, you do know there is no organizer in the mac version, so you need to prepare for that? Just checking.) EDIT Never mind, I see you're using LR anyway.

  • Logic Studio 9.1.1 doesn't work with Lion OS

    So installed Lion but when I try to open Logic 9 I get this:
    You can't use this version of the application Logic Pro with this version of Mac OS X. You are using Logic Pro 9.1.1
    Anyway around this? How do I revert back to the previous OPS?
    thanks
    Si

    For the Update to work Successfully Your Logic Folder should be in your Applications Folder and Named Logic Pro
    Here's the Link for Logic 9 4 1
    http://support.apple.com/kb/DL1014

  • External HDD (used before on a Windows) doesn't work with new Mac

    Hi
    I have this Seagate 1 TB ext HDD that I've been using with my old Windows, but unfortunately, when I connect it to my Macbook, I'm not able to make changes, nor can I edit or delete files or add new files to the HD. What should I do?
    Thank you so much for your help.
    edit: To answer a question by a fellow community member, the format is NTFS.
    Message was edited by: azrimiskal (added format of NTFS to the question)

    The link I gave you was to the MacUpdate.com page for Paragon NTFS.  Look lower on that page for the Similar Software section and see if any of them are free.
    I am assuming an external drive in an enclosure.  Any drive will do so long as the enclosure that encloses it can talk to your mac (firewire is better than usb2 and thunderbolt better then either of them).  For example take a look at the selection at OWC.
    Personally I like to buy empty enclosures (which you could get at OWC) and stick the drive of my choice in them.  That way I get to choose the drive of my choice (I like Western Digitals) and stick it in the enclosure of my choice.  I view enclosures as dumb boxes who's only goal in life is to let you communicate with the drive they enclose.  You can by "complete solutions", i.e., enclosures with drives and accompanying software.  In almost all case that software gets in the way and screws thing sup from the box just being a dumb box.

  • Incomplete ALSA support for Cirrus Logic CS4206 chip?

    Hey gang! First a bit about my system. I'm running the 2.6.35-ARCH kernel on my macbook pro 5,5 which has an HDA NVidia soundcard with a Cirrus Logic CS4206 chip. I have my audio playback working through ALSA (arch packages alsa-lib, alsa-oss, alsa-utils, alsa-plugins) and have installed jack2-svn, qjackctl, and ardour3-svn.
    My goal for the time being is to be able to track on ardour, recording from my internal mic. (I have an audio interface but no other mic at the moment) I know this is less than ideal but I just want to be able to record so I can start learning ardour while I save for a mic
    My Problem seems to be with ALSA. I can get my jack server up and running, and Ardour recognizes it and makes the connection. (unlocking my memory is something else I need to figure out). Ir have tried every combination of input/out configurations for my master, and initial audio track but I when I do hear input from my mic it always is with the same quirks. There is a large amount of hiss and distortion of with audio, the level meter never changes as if ardour doesn't think anything audio is playing, and when ardour records this distorted input no waveform is shown but the sounds do playback (and once again no movement of the level meters).
    Now this is what my alsamixer looks like with F5 (view all):
    http://img101.imageshack.us/img101/6092/alsamixer.png
    It would seem that I have no input device selection abilities in the mixer. I can change the the volume of capture and turn on and off the left and right channels of the capture. (in the screen I understand that only the left channel is on. it just created less distortion this way). But the same problems persist in ardour. Obviously wrong somewhere in this chain of processes!
    Does anyone have any ideas? Thanks so much for your time!

    ok.. problem solved, had to reinstall alsa and then pulse audio and again start playing with things with alsa mixer like nagoonee recommended,
    thanks !

  • My i pod nano first generation doesn't work with windows 8

    My i pod nano first generation doesn't work with windows 8

    Howdy yvesmd,
    Thanks for using the Apple Support Communities.
    If your iPod nano is not being recognized in iTunes on your Windows computer, then I'd like you to please follow the directions in the link below.
    Apple - Support - iPod - iPod nano Troubleshooting
    Cheers,
    Alex H.

  • Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.)

    Do I need to install boot camp on Windows 7 as well as on Lion? I already installed it some years ago on Leopard when installing Windows Vista on my Macbook Pro. But now after installing Windows 7, many things in windows doesn't work (sound etc.). I made a clean installation because I needed to go from 32 bit to 64 bit.
    Or should I just update bootcamp in Lion? (cause when I search for "boot camp" in Windows 7 there's no result)

    Installation Guide
    Instructions for all features and settings.
    Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
    Windows 7 FAQ Answers to commonly asked Windows 7 questions.
    Apple Boot Camp Support
    Lion's Boot Camp Assistant 4.x should have downloaded Apple drivers as part of also partitioning.
    You need Apple drivers. And you then need to add on your own audio driver.
    You can run Assistant at any time to download and save a set of drivers.

  • AT-AO-10 doesn´t work with Windows 2000

    I have an AT-AO-10 board that doesn’t work with Windows 2000. I have reserved two IRQs for legacy devices (non plug and play) in BIOS. The AT-AO-10 has got assigned these IRQs, a DMA and a base address that are free, and there aren’t any hardware conflicts, but the board doesn't pass the MAX's text.
    In Windows 'Information System', the board is shown in 'Forced hardware', but I don’t know that is a problem.
    If the board is unplugged, error messages are the same.

    Hello;
    You didn't mention what version of the NI-DAQ driver you are using over there. Anyway, my suggestion to you is to uninstall the NI-DAQ driver you have installed, remove the board, reboot the machine, download and install the latest NI-DAQ version (6.9.3) from NI web site.
    Try the installation with the new driver, and if that is still not working, the best bet is to try the same installation on a different machine to double check if the hardware is not defective.
    Regards
    Filipe A.
    Applications Engineer
    National Instruments

  • Why doesn't the replace option of JavaScript's window.open method work with FireFox 3 or 4?

    The photo html files on the Fanac Fan History project's website are now setup to be displayed properly when JavaScript is disabled and reformatted by a php script when JavaScript is enabled. The reformatting adds some features and positions each photo's caption and credits based on the width of the photo and the browser's page width. This worked well except that when a photo page was accessed the browser's back button wouldn't work properly. This was because I had failed to include the replace option in my windows.open statement. The statement now reads fileWindow = window.open(fileURL, "_self", "", true); and this has cured the problem with IE and the other browsers but it still doesn't work with FireFox.
    PS: You need to add "Always" to "This happened".

    We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
    #Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
    #In that text field, enter %APPDATA% and press Enter. An explorer window should open.
    #From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
    #Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
    #Open the most recent 5 files with a text editor and copy the IDs.
    #Paste each ID with '''bp-''' into the reply window on the forums.
    Thanks in advance!
    You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

  • Quicktime for windows doesn't work, wont let me uninstall or update.Help!

    Quicktime for windows doesn't work, won't let me uninstall (tells me fatal errro) or update (tells me it encountered an error on installation). Help!I am running Windows XP on an Intel pentium PC. Any ideas? Dvora

    When you get this fatal error uninstalling, try a full removal of iTunes and related programs with an installer clean up of any that do not uninstall cleanly:
    Here is a method:
    Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
    http://www.apple.com/quicktime/download/win.html
    http://www.apple.com/itunes/download/
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
    To run the program – All Programs>>Windows Install Cleanup
    http://support.microsoft.com/kb/290301/
    Now use the following method to remove iTunes and its components:
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    *If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
    When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
    Restart your PC.
    Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
    Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
    If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
    restart your PC
    Install the stand alone Quicktime and check that it works.
    If it does, install iTunes.

  • Cant open logic 9,get a message saying logic doesn't work with osx lion 10.7.5

    I'm running OSX Lion10.7.5 and I reinstalled Logic 9 and a message comes up "logi 9.0.0 doesn't work with this OSX", I first installed Logic when I had OSX 10.5.8 and it worked.

    Update Logic Pro 9.0.0 to 9.1.8
    I assume you are using the boxed DVD set so here is the appropriate link....
    http://support.apple.com/kb/dl1601

  • Close Window doesn't work in all browsers

    I have set a basic JavaScript to close an open browser
    window.
    It works with Safari, IE and Opera (on Mac OSX and Windows
    XP) but not Firefox or Netscape Navigator (on either platform)
    I have tried three variations (Button with
    "javascript:self.close()", text link with
    "javascript:window.close()", and text link 2 with
    "javascript:self.close()"
    If you have time could you please test my page and let me
    know where I have gone wrong?
    http://www.madetall.co.nz/swatchtemplatetest.html
    Thanks Steve J

    > If you have time could you please test my page and let
    me know where I
    > have
    > gone wrong?
    I don't think firefox lets you close a window via javascript
    unless you also
    created that window via javascript.
    -Darrel

  • [SOLVED] Xmonad: trasparency doesn't work with compton intel

    Dear All,
    I am having a strange issue with Xmonad and I am not sure whether it is a problem of my Arch or Xmonad configuration. I decided to ask on Arch forum first, as my other computer running Arch has exactly the same Xmonad setup and it works fine. I would appreciate assistance from some Xmonad or Arch proficient users on this.
    Basically, I have this piece of code in my xmonad.hs:
    myLogHook :: Handle -> X ()
    , logHook = myLogHook dzenLeftBar >> fadeInactiveLogHook 0.8
    On the other computer this makes all the unfocused windowses slightly transparent. I find this feature very useful as it helps me focus on the window I am working with.
    For some reason this doesn't work on my laptop. My laptop is using xf86-video-intel since the lspci gave me
    %lspci | grep VGA
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
    Also I am invoking compton-git from AUR but I have also tried with xcompmgr in my xinitrc and it gave exactly the same result - no transparency whatsoever.
    I looked through my log file, but couldn't find anything relevant (please let me know if you can think of anything). How do I proceed with this issue? Do I try different composite managers? Do I try different drivers? Is there anyhting in X setup that I should include? Please let me know if you have any ideas.
    Last edited by AlmostSurelyRob (2013-06-18 10:18:08)

    I am very sorry. I've just discovered that neither compton nor xcompmgr were installed. It's not only solved, it should be marked as [NOT RAISED]. I was migrating my configuration and overlooked some erm... details.

  • Media Encoder CS4 doesn't work with Premiere (pic related)

    Oh hai!
    I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
    Encoding failed
    Could not read from the source. Please check if it has moved or been deleted.
    And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
    I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
    I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
    Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

    Hello, this is terrible problem, which i found in CS 6 softwares ...
    solution i found only working, is uninstall and reinstall full package.. but it is not all,
    you need to do BRAND NEW admin account in windows, and install it there.
    that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
    1.by reinstalling of software, client WASTE HIS TIME
    2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
    I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual  "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..  
       I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
    History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
    1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) . 
    I continued my work on my normal working windows profile . (profile A)
    Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
    2. suddenly it stop working (without knowing any possible reason - i did not do installations )
    and showed in error export log file :
    "Could not read from the source. Please check if it has moved or been deleted."
    3.repair via procedure(procedure "a"):
    i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
    I did these steps :
    a-uninstall master coll suite
    b-i used Adobe cleaner tool (remove ALL)
    c-removed raw directories in locations
    •C:\Program Files\Adobe
    •C:\Program Files(x86)\Adobe
    •C:\Program Files\Common Files\Adobe
    •C:\Program Files(x86)\Common Files\Adobe
    •C:\ProgramData\Adobe
    d-removed these links from registry file
    •HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
    •HKEY_CURRENT_USER\Software\Adobe
    •HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
    •HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
    e-restarted the PC
    f- newly installed the Master Coll CS6
    g-update the software
    result of repair of "3" : problem still exists
    4.Ok i find out after coordination with support, it should have been created  ANOTHER NEW admin account.
    4a:so i did the same procedure (uninstalling) in profile B
    4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
    4c: restarted the pc (and did not updated it yet)
    result :
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
    ==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
    (in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
    problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
    this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
    what i expect :
    to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
    what i do NOT expect from Adobe:
    to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

  • Firefox command line option "-no-remote" doesn't work with profile.

    I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?

    Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
    Please find below the command what I am using
    firefox -P "stripped" -no-remote
    firefox
    If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
    I use the -no-remote with firefox default than it works for the first time.
    I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
    firefox -P "stripped"
    firefox -no-remote
    (But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
    Do you have any idea why this is happening?

Maybe you are looking for