Cisco 1200 on long distances

I need to know (if anyone have in practice). What will be maximal distance in ideal conditions with Cisco 1200 series AP for outdoor point-to-point connections in WGB mode with high gain directional antennas ?

Console into the AP and post the log. This will help understand the issue better.

Similar Messages

The maximum cable distance from antenna and Cisco 1200 series.

Hello all!
I?m using the Cisco 1200 Access Points Series with two 2.2dBi dipole antennas. I have read the installation guide for that Access Points and that can be installed with the antennas in separated places. But this guide didn't mention the maximum distance for the antenna cable...
Somebody here can say me this maximum distance?
Had somebody here made this kind of antenna installation with cable?
Thanks.

Oh Yeah!, I absolutely agree on "shorter is way better"
Given any chance / choice at all, I'd try to keep the cable length under 25 feet. If the option is available for a NEMA cabinet to get the cable shorter, I'd probably do that too.
Since it's good practice to use a chunk of fiber optic cabling between the external stuff and the inside network, you may as well put the AP as close to the antennas as possible and convert the copper to fiber for the long haul.
You get some lightning protection (at least you won't smoke all of the systems sitting on your LAN) and better signal strength (and probably signal quality too).
For something like a 200' run, if forced to do it (we're talking "gun to the head" forced here), I'd probably be looking for something like Andrew LDF4-50 1/2" Heliax with probably a weeeeee bit O' amp tossed in for good measure.
That would also imply that the system would also have to be re-certified, because of the non-standard components ...and a pretty good budget to boot.
Sometimes you gotta do what you gotta do.
FWIW
Scott

Cisco 4500 Chessis Switch with sup 7l-e supports VSS for long distance upto 40 Km

Hello Team,
hope you will find this massage in good health and spirit.
As per my understanding, Cisco 4507R+E with Sup-7L-E will supports VSS for long distance upto 40 Km, i have a scenario that there are two Data Centre of a Company at different graphical location (distance is 2 Km), both have separate network devices but distributed servers connectivity and all servers accessed from both location (some servers are placed in location 1 and some servers are at location 2), both location has separate ISPs link with segregation of internet connectivity (some users using internet from ISP-1 and other are using ISP-2), Core Switches of both location connected to each other via fiber (company fiber not ISP), at this moment Core Switches are configured with multi-group HSRP and next upgrade to VSS.
My concern is if Virtual Switch link (VSL) goes down (which will configure on company fiber link) what is the behavior of Switches, both are in Master mode and working standalone or behavior are different, please confirm and suggest for better.
Regards,
Ammar Ud-Din

does anyone reply me on this......

Cisco 1200 as bridge

Hi everyone
I am about to use Cisco 1200 series AP as bridge , but I have seen and I have compared it with Cisco 1300 and 1400 outdoor models , and I saw that 1200 is mainly for indoor (LW).
Now the question is :
1. Can I use it as outdoor bridge for Point to Point linking ?
2. What will be maximum distance with reflector grid antennas (and patch antennas)?
3. If in practice , is it stabile ?
Thank you

Again I stress I can only go by what I'd install in the UK so it may not be applicable wherever you are! Also, I always try and avoid mixing vendors equipment if at all possible so I would use either one of two Cisco antenna, I've also listed antenna cables, use the shortest you can:
AIR-ANT1949 Yagi mast mount 2MB at 29.49 km.
AIR-ANT3338 Solid Dish 2MB at 42.62 km.
AIR-CAB020LL-R 6m antenna cable 1.3db loss
AIR-CAB050LL-R 15m antenna cable 3.4db loss
AIR-CAB100ULL-R 30m antenna cable 4.4db loss
Ranges and throughputs are Cisco's, you may find the biggest problem is clear line of sight over that sort of distance.
For more information check the antenna guide here:
http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008022b11b.html
You can have this one free of charge : ) just don't forget to award points if it's of use : )

FAC Prior to Dialing Long Distance String Possible?

So I have a customer who currently dials 886 and then their PBN (Private Billing Number), and finally they dial their long distance number.
Platform CUCM 8.5 UC on UCS
Thoughts - At first I thought I could somehow create a translation pattern and then point to a route pattern to get the FAC / PBN completed. This doesn't seem to work though... Since an RP is routed to a gateway or route list I cannot send it to another RP.
End user dials 886 then the FAC, and finally the LD code....
Any Ideas.... Greatly appreciated!!
ls

It's not possible to modify at which point FAC is requested.
You cannot dial it before or within the dial string, it has to be dialed at the end of the process.
You can create route patterns and have them use the same dialing format of 886 + code + DN and discard 886+code but it won't be checked to make sure it's valid nor it will have any special reports.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

My cisco vpn no longer works with Lion

After installing Lion, my cisco vpn no longer works. If I force boot in 32 bit mode it works fine, so appears to be a cisco client issue. Does anyone know if CISCO is working on 64bit client compatible with Lion?

Not sure this answer helps me or anyone else. My VPN connection no longer works in Lion. How do I re-set the parameters of my VPN connection to work in Lion?
Below is what my VPN screen look like:

How do you use a long distance card with iPhone??

I have my long distance card set as a contact but when I dial it and then dial the contact I want to reach it treats it like a seperate call. Anyway around this? Ideally it is just for when I call one area code - in Canada - that I want it to first dial the calling card number as a prefix.
thx in advance

You should compile the FPGA into a bit file. You can then load the bit file in the host VI. This loading should only happen when the host VI is ran.
10 minutes to compile? That is quick!!! I had one that took 2 hours and I've heard stories of some taking a lot longer.
The Producer/Consumer architecture is the closest thing I can compare my setup to. Yes, I use the queues because the host VI is constantly running. You have to use some kind of messaging in order to pass data into the host VI. I used an Action Engine to keep my queues in order, but you could probably just use named queues to accomplish the same task.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Local skype to go number is long distance

I have a contact skype to go number which is long dsitance as well as my access number for all other calls is a long distance number. How do i get a different skype to go number for a contact as the rest of my contacts are local skype to go numbers

Hello,
Please advise your access number and your other direct dial numbers. Thank you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Switched long distance from At&t to verizon in February still no long distance capabilites, WHY?

Switched long distance from At&t to verizon in February still no long distance capabilites, WHY? I have made numerous calls in the last few months and still am not able to make a long distance call. Do I need to switch back to AT&T. I have been using Skype but doesn't Verizon want the business?

Some verizon people do look here but this forum is mostly for user to user help.
Try "contact us" http://www.verizon.com/contactus

Long distance in local calling area

I have set up some Skype to go numbers in my calling area and some of them are working but when I dial others Bell Canada says the number is a long distance number. Is there any way to chose the number (ie 613 927 XXXX or 613 434 XXXX) instead of it being automatically assigned? ANy help would be appreciated!

a STG number is mapped to a single target number, and that number must always be entered in international dialing format (i.e. exactly the same way you would dial it if you were wanting to call it using SkypeOut on any Skype client)
Regards,
Neil

What is the email for the covent garden apple store (UK), if not apple uk. I am in canada and need to contact THIS store (for an insurance claim) and the phone system won't work for a long distance call.

I am currently living in Canada (but I am from the UK).
I lost my iphone 4S 32GB a couple of weeks ago and I need to try and prove to my insurance company that the iphone was a 32GB.
I was told by an apple store near where i live that the original store where i purchased my iphone may be able to find records on my phone and print out a receipt for me. I can't get through to the Covent Garden apple store in london (where i brought the phone), because the automated phone system that apple uses doesn't seem to like long distance phone calls.
Is there an email for the covent garden store, or for apple uk? I tried toi chat to an apple advisor online, but because of my location i got put through to apple USA.

https://selfserve.apple.com/agreementWarrantyDynamic.do
I noticed an error for some reason, the last two characters should have been do rather than co.

Accessing Oracle DB at multiple location(long distance)

Hi guys,
I have a situation where i need to connect to oracle database which are at long distance(say singapore and UAE). Structure of database is same.
Which is the better way to implement.
1. Using seperate connection for database
Connection conSingapore
Connection conUae
and use diff Statements
or
2. replicating database at single location and accessing centralized database.
Second option is easy as far as java program is concern but what abt replication process? This may cause synchronization(data inconsistancy) problem. Can we use DB link or Materialized views? Has anybody heard tht?
Is there any better way to overcome such situation.
Please help incase anybody has good idea.
Thanks in advance

If I get your intention correct, I would advise to pass in the URL of the db at runtime. That is if you are using the thin driver, you can use the following :
DriverManager.getConnection(url,userName,passWord);you can specify the Database details on runtime so that the connection to the corresponding DB is made.
GoodLuck,
Sekar

Monitor vibration over long distance ( 300m)

Hi everyone,
Currently, I have a project to monitor vibration (16 IEPE channels) from a station that is more than 300m away from monitoring station. Looking at NI's products, I have a few options:
1. Using ENET-9234:
- Only 4 channel/module. I need to use 4 modules in total, and need to connect to a router.
- Ethernet distance is limited at 100m. To reach 300m, I need to use at least 2 repeaters, which are not suitable for my project (off-shore environment)
2. Using MXI-4 with Fiber Optic: PXI-8336
- Maximum allowed distance is 200m.NI recommend to add another segment (i.e. add another PXI chassis in between) to extend range to 400m. Or use optical converter to convert between multi-mode fiber to single-mode fiber to extend range
http://digital.ni.com/public.nsf/allkb/C86BF63CC73C6721862575F2005A246D
These recommendations are not suitable either due to harsh contion in the sea and difficult maintenance.
3. Last option is acquire and process data at the site. Then transfer only processed data back to monitoring station over GPIB or RS-485.
I would like to seek your advices on these options. Is there any way to avoid the repeaters in between?
If you have any other ideas, please kindly let me know.
Thank you very much!
Have a great week ahead!
PQH

I also like the cRIO approach. There are copper to fiber media converters on the market that offer single mode fiber which is what you would need for the longer distance.
Check out the following tools to help you get up and running quickly with cRIO:
This listing is an attempt to list and briefly describe core tools that speed the development of waveform acquisition and analysis applications on the CompactRIO and RT platforms.
NI CompactRIO Developers Guide: This is a core developer's guide for a wide range of waveform acquisition and analysis applications. It provides useful background on CompactRIO and control applications in particular. It has chapters on waveform acquisition as well as deployment and management of applications on CompactRIO.
http://www.ni.com/compactriodevguide/
Reference Applications for cRIO Waveform Acquisition: This is the core template for acquiring waveforms for analysis, including vibration, electrical power, and structural monitoring. It makes a great starting point for waveform applications on cRIO.
http://zone.ni.com/devzone/cda/epd/p/id/6206
cRIO Reference Designs for Structural Health Monitoring: This reference builds on the waveform acquisition reference and adds scan engine for slowly changing signals as well as TDMS data logging on event.
http://zone.ni.com/devzone/cda/tut/p/id/9851
Simple Messaging Reference Library (STM): This tool provides a TCP/IP communications protocol which is used in the benchmarks shown on the waveform acquisition reference page. It is an excellent tool for efficient communications between cRIO and a host, easily supporting time waveform live streaming.
http://zone.ni.com/devzone/cda/epd/p/id/2739
Reference Library for Converting Between LabVIEW and XML Data (GXML): This reference provides a remote XML configuration tool, to be used for remote configuration of the cRIO LabVIEW application.
http://zone.ni.com/devzone/cda/epd/p/id/6330
LabVIEW Syslog Protocol Reference Library: This reference offers a UDP cRIO status monitor to indicate to the host the operational status of the remote cRIO
http://forums.ni.com/ni/board/message?board.id=Components&thread.id=51
Reference Applications for cRIO Order Analysis Using a High Speed Tach: This reference offers tachometer or encoder interpretation in FPGA when the I/O device is in a separate and higher speed loop.
http://zone.ni.com/devzone/cda/epd/p/id/6301
DSA Module Synchronization Reference Design for Multiple cRIO Chassis: This reference is useful when the timing of I/O needs to be tightly synchronized between two cRIO chassis. It works with a signal line, as well as with GPS.
http://zone.ni.com/devzone/cda/epd/p/id/6146
Additional NI Systems Engineering Components are listed here: Additional tools can be found on the Systems Engineering Components discussion forum.
http://forums.ni.com/ni/board?board.id=Components
Hope this helps you get started with cRIO, which is a great choice for industrial oil platform applications for temperature, and Class 1 Div 2 certifications.
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444

Access Code for Long Distance

I am unable to make long distance calls. Each time I try I get a recording stating the access code I entered isn't valid. What does this mean? I've never heard of using an access code for long distance.
Thanks in advance for your help.

Could be mistake.
You could have been slammed by another phone company.
You didn't identify your type of phone service. E.g Fios Digital Voice, Verizon Freedom Plan, etc..
Remember you are talking to peers here. Most likely you will need to use the CONTACT US button on any of the verizon webpage.
http://www.verizon.com/support/residential/contact-us/index.htm

Program Long Distance Card

I'm wondering if it is possible to with just one click make a LD call to a contact in my contact list and automatically have the call charged to my LD card.
I was used to my cellphone which allowed me to call any # from my contact list and when I held the send key for 2 seconds it automatically recognized I wanted to make a LD call and charge it to my calling card, which was already programmed in the phone.
Or is it possible to have the BB recognize any LD number prefixed with a 0 should be charged to my LD card, without having to type in my LD card # and PIN all the time.
I don't want to pre-program all my LD contacts with the calling card #, because sometimes I find my self in the city where my contacts are, and I need to call them locally.

ItsThePits wrote:
I don't want to pre-program all my LD contacts with the calling card #, because sometimes I find my self in the city where my contacts are, and I need to call them locally.
For each of these contacts, you can store one phone number for Long Distance and one phone number for local calls. So when you call one of the, you just choose which one you want to use. I hope you don't have too many contacts
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Cisco 1200 on long distances

Similar Messages

Maybe you are looking for