Cisco 1310 used as Bridge: Option for integration to WLC or WCS

What is the best management option for the Cisco 1310 being used as an Autonomous Bridge (pairs: Root and Non-Root). We want to manage and have some reporting back into the WCS.

WCS 6.0 configuration guide says that only AP1130, 1200, 1240, 1310
Bridge are supported.
The autonomous to lightweight migration support feature provides a
common application (WCS) from
which you can perform basic monitoring of autonomous access points along
with current lightweight
access points. The following autonomous access points are supported:
* Cisco Aironet 1130 Access Point
* Cisco Aironet 1200 Access Point
* Cisco Aironet 1240 Access Point
* Cisco Aironet 1310 Bridge

Similar Messages

How to use the print option for photos?

How to use the print option for photos. I have a wireless printer but how do I set it up?

http://www.apple.com/support/iphone/assistant/airprint/

Install "use typical installation options for a stand-alone primary site" All SQL Prerequisites Failed. Checks SQL before SQL is even installed?

So I select the install option to "Use typical installation options for a stand-alone primary site" which says it includes installation of SQL 2012 SP1 on the local server.
But then during the prerequisite checks it fails every SQL check.
Is it just me or a giant catch 22? Am I missing something here? How is this over looked if it is what it looks like? Why even have this simple install option if it can't work?

Take a look at my R2 install guide. This is for a stand alone primary. As Torsten states you pretty much need SQL installed and configured correctly prior to running the ConfigMgr install - along with a few other pre-reqs.
https://sccmentor.wordpress.com/2014/01/08/sccm-2012-r2-step-by-step-installation-guide/
Cheers
Paul | sccmentor.wordpress.com

I'm using the sync option for when I'm not near my desktop and no matter what it won't work its telling me my account name or password is not correct and it is!

I'm using the sync option for when I'm not near my desktop and no matter what it won't work its telling me my account name or password is not correct and it is!

This is from my personal experience:
It almost happens every time I tried to connect with Sync from my Android phone, the window asking me to enter my account name and password always shows up. And if I enter the information, it'll say I have the wrong password, etc. My workaround is to click the "cancel" button. But it does not cancel immediately. The window will stay on for a while (usually a few minutes), then it'll disappear and start connecting to Sync. And it'll connect and sync successfully.
You can try this workaround but you have to be patient to wait for the window to disappear.
I don't know what is the cause of this, but it has happened ever since FF4 for Mobile came out. I have searched around and couldn't find any solutions.

Cisco VIC 1225 CNA Connectivity Options for 10G Upgrade

I've currently got an opportunity to upgrade a C220M3 UCS server from the standard Intel 1G LOM's to 10G and I'm looking at various ways to achieve this. This is for a standalone UCS server running VMware.
At the present time in this environment there isn't a 10G uplink switch port that can be used to connect a 10G UCS port to, so I'm looking at ways to at least complete the 10G hardware upgrade on the UCS side and have that component completed, while having a transition period of 1G connectivity in the short term.
It seems the VIC 1225 is the obvious choice for this, as price wise it's reasonable and it's fully featured, even if we only need the 10G ethernet (no FCoE in the short term).
One option I was looking at was to use the 1225T model, as this supports 10BaseT backwards compatible with 1000BaseT. However while it's an easy choice on the UCS, Cisco don't seem to have any 10G copper modules on the switch side, except in specific models in the Nexus family. This limits our switching options in the future (this rules out the use of 4500-X's or 3850s for example).
10G fibre is an option, as is Twinax, however this brings me to my next few questions.
1. It appears that based on the C220M3 spec sheet at http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/C220M3_SFF_SpecSheet.pdf (see Table 14) that the 1225 doesn't support Twinax. In fact it's the only NIC and CNA listed that apparently doesn't support it, which seems odd. Is this correct, and what is the reason behind this? Is this a hardware issue, a software issue or a documentation issue?
2. If Cisco Twinax is not an option, does the 1225 support 1G SFPs such as the GLC-SX-MM?
3. It looks like the X520 card for UCS might work, as I believe it can run with dual-rate 1G/10G SFPs. Has anyone tried this or have any comments on how those work with UCS?
Thanks,
Reuben

Reuben Farrelly
The 1225 (UCSC-PCIE-CSC-02) does supports twinax cables, the documentation has a type-o. If you look at the documentation for the c240 M3 that supports the same 1225 adapter, you will see that this card does supports the twinax cables (see attach screenshots). In the documentation it shows that the 1225T supports twinax but this card comes with 2 10GBASE-T ports so it won't support either twinax cables or SFPs.
Please let me know is this is helpful
C240 M3 Page (39)
http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/C240M3_SFF_SpecSheet.pdf
1225T (Table 2. Product Specifications )
http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/ucs-virtual-interface-card-1225/data_sheet_c78-727604.html

Online Meet 15. Is XI mandatory or optional for integration with mySAP ERP?

no but if you use XI you can get a predefined set
(xi content) for the AII integration
so you get an out of the box scenario
Regards,
michal

hi,
If u want to call an RFC or so from an R3 system , then XI is the way to do it...
ERIC's words on the meeting were " XI is there for integration , so y not try and use it for ease.."
regards,
arul sekar.

[JS][CS5] How can use 'edit with' option for link using sripting

Hi All,
I Can edit link using Link.editOriginal () if the default application is as i need it will open it from there, when I try to open it with other application instead of default application of link file I can't (usually we "use edit" with option in manually). Is there any option to do it in scripting.
Any clue will help us to update the large set of links in a single click.
Thanks in advance,
Sankar L

Hi csm_phil,
You are exactly catch my point, my requirement is to update math type eps file. If my math type equation default application file is illustrator (say) as below
it will open in illustrator instead of mathtype if i use editOriginal function...
Jus i need to open it in mathtype, the link file default application file is whatever it is.
Thanks,
Sankar L

Options for integrating Tickets between Dynamics CRM 2011 and Service Manager 2012 ?

Any suggestions on the integration of Dynamics CRM 2011 and System Center Service Manager 2012 ?
I am looking for side-by-side integration like this:
1. A ticket in CRM is entered I want it to be entered in Service Manager.
2. Once a ticket is updated in SM we'd like that reflected in CRM.
3. If ticket is updated in CRM should be reflected in SM.
[Tickets originating in SM moved to CRM is not a requirement.]
Please suggest some guidance around this topic :)
-Nikita Polyakov

Nikita,
I'm currently in the process of integrating CRM with Service Manager. I'm actually using Anton his approach, using Orchestrator 2012 runbooks.
Basicly I am creating a runbook that queries the database of CRM (via the filtered views) and with that data I am creating objects in Service Manager (via the Service Manager integration pack)
- Dennis | Netherlands | Blog |
Twitter

How to use oracle fusion middleware for integration project ?

hi all,
in my projects, customer (a bank) already has many applications (bankend & frontend) that are complicatedly connected. I intend to use oracle fusion middleware to integrate all applications and make adding new applications in the future easier. I have worked through documents in the oracle website but I still have no idea how to use oracle fusion middleware to address the requirement, besides oracle fusion middleware includes a bundle of applications I don't know which one I would need.
could anyone give me some instructions ? appreciate your help.
thank very much,

Hi,
For this short description of environment, could be ODI is a incredible tool to help you...
Take a look into my blog that has a lot of concepts and "how to do" instructions.... http://odiexperts.com
However to try help you, what are the used technologies?
Where are you from?
Cezar Santos
http://odiexperts.com

How to use Multiple Single Option for selection in the Customer Exit

Hi,
How can we handle the multiple single values in the customer exit variable.
I have a requirement which is as follows -
Table A fiields -> Field Coach, Partner 2, Relation between PArtner 1 & Partner 2, Valid from, valid to date.
Table B -> Service Month, Start Date, End Date.
Table C -> Billing Date, Execution Partner,cal month /year.
For the Field coach in TABLE A, multiple Partner 2 are present.
Report has to be built on Table C.
User inputs the Service month and Field Coach . User can enter multiple field coach values.
For the All the Field Coach values entered, corresponding Partner2's have to be found from Table A and to be passed to the Execution Partner in Table C.
Now if we want to use customer exit variable on the field Execution Partner, how can we handle the Multiple Single selections in the customer exit.
Thanks,
Shubham

Hi,
While creating the variable you must have to specify multiple value.
In customer exit
write code multiple times and append the values.
For example:
when 'variable'.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 1.
APPEND L_S_RANGE TO E_T_RANGE.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 2.
APPEND L_S_RANGE TO E_T_RANGE.
l_s_range - sign = 'I'.
l_s_range - OPT = 'EQ.
l_s_range - LOW = EXECUTION PARTNER 3.
APPEND L_S_RANGE TO E_T_RANGE.
Regards,
Ranganath.

What are the options for integrating the event catalog and event landing pages in our website?

We'd like to integrate the event catalog and event landing pages into our website but would prefer not to use the standard iframe embed code. Are there other solutions available, like an API or something else?
Reason for this is that when we tried it with the iframe embed code the event catalog seems to load quite slow in a webpage on our website. Plus it seems we can't change the width and height of the event catalog with the CQ5 editor, or have the event catalog embed dynamically change in size depending on the amount of events in the catalog.

Keeping everything in one scene is the better way to go. Scenes are useful for animators who do not use navigation, they just make movies that play frame after frame without stopping. But for anything that involves navigating the timeline you will have less headaches if you just avoid them and keep everything in the one main timeline.
There are primarily two approaches to implementing pages in a timeline. Either spread them out along the timeline and navigate from frame to frame to access them, or create them as movieclips (all in the same frame) and manage their visibility. The latter approach makes it easier to maintain the status of a one page if navigating to another is necessary. And you might find it useful to mix these two approaches at times.
When you have everything on one timeline, you can have a layer dedicated to actionscript that you extend the full length of the timeline, which makes shareable code, such as variables and functions, available to anything along the timeline. This avoids any need to have duplicate function definitions since you can have the same single function available to multiple pages in the site. I usually use two actions layers... one for the shared stuff which has all code in frame 1 only, and another for frame specific code such as timeline commands and other action coding that needs to happen at particular frames.

Is Using the COM API for Integration still valid for UCM 11g?

Dear All,
One of our partners is trying to implement integration to UCM by using the COM API (described http://download.oracle.com/docs/cd/E17904_01/doc.1111/e10807/c08_com.htm#i1084682).
However, they cannot follow the manual, because the environment does not correspond to the written text:
-     8.2.1 To set up IdcCommandUX, run the IdcCommandUX setup file, which is stored in extras/IdcCommandUX/setup.exe in the media. – no such directory exists (neither extras, nor IdcCommandUX); ‘extras’ used to be in 10g, though
-     8.2.3 1. Add the IdcCommandUX control to the project . – according to the partner, this is supposed to mean that IdcCommandUX.ocx must exists somewhere – there is no such file to be found
-     8.4 speaks about “IntradocClient OCX component”, 8.5 speaks about “IdcClientOCX Component” – the system has only IdcClient component, which contains only idcclient.jar
Could anyone confirm that COM API is still available in 11g? If so, what steps need to be followed to make it running?
Thanks in advance, Jiri

For what it's worth, I had no problems migrating an authentication plugin from 4 to 5. This is really good, because otherwise I wouldn't be able to use 5.1.

Can View be used to define Interface for Integrator?

Hi, I tried creating a view on top of header and lines table and registered the view using ad_dd.register_table. When I select this view in Interface definition page, it says 'Invalid Interface Table Name' . Is it possible to create Interface based on view?
Edited by: user12132926 on Mar 21, 2013 4:08 AM

unfortunately no, there procedure creating background the interface columns uses the ALL_TABLES view to generate the columns
regards
Giuseppe

Column does not move using standard folder option for Forms (10.1.2.0.2)

I have follow the links http://www.freewebs.com/lvterry/oracle/apply_folder.html
I found that some column can move around but some are not!
Did anyone have same experience? would you tell me how to solve it?
Thanks a lot

Folders are a concept of the oracle ebusiness-suite. You should ask your question in an eBusiness-suite related forum.

Cisco-Linksys Router and no PPPOA Option for Conne...

Hi all!
New here and just hoping to get some here!
We are using a BT Business hub Router and it is having a few issues with wireless connectivity, so I would like to use another router to see if it is our equipment or if it is the router itself.
I have a Cisco Linksys E1000 Router and after looking at the BT router I can see that the connection type is set to PPPOA with a username and password. I do know the username and password so that isnt an issue, however on the Cisco router there is no option for PPPOA, the only options are:
Static IP, DHCP, PPPoE, PPTP, L2TP, and BigPond
There is a connection in the back of the cisco router for the ADSL cable, I was just wondering if there is a way to work around this?
Thanks very much!!

I am sure you will get help there when someone has time.
You can always find the latest postings on the Business Forum using this link.
http://business.forums.bt.com/t5/forums/recentpostspage/post-type/message
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Cisco 1310 used as Bridge: Option for integration to WLC or WCS

Similar Messages

Maybe you are looking for