Cisco 2500 & 2600 support for MPLS ???

Can Cisco Router 2500 & 2600 Series provide provide MPLS switching?

2600 is fine for lab use....
milt-vpn-1>sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(1), RELEASE SOFTWARE (fc3)
Copyright (c) 1986-2003 by cisco Systems, Inc.
Compiled Thu 15-May-03 13:12 by dchih
Image text-base: 0x80008098, data-base: 0x819BC684
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
milt-vpn-1 uptime is 1 week, 6 days, 21 hours, 12 minutes
System returned to ROM by reload
System image file is "flash:c2600-j1s3-mz.123-1.bin"
cisco 2611 (MPC860) processor (revision 0x202) with 59392K/6144K bytes of memory
Processor board ID JAB0321051M (1822838117)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
2 Ethernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
2 Serial(sync/async) network interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102

Similar Messages

IOS for 2801 having support for MPLS

Assalam o Alaikum,
Is there any IOS for 2801 router which has the support for MPLS?

Alaikum Al Salam,
Please use Cisco Feature Navigator to find information about Cisco IOS software images and the supported features for your platform(s) :
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Search by feature and choose MPLS, and then choose Cisco 2801 as the platform, you'll get a list of the IOSs that support MPLS on your platform, and please always check the required DRAM and Flash.
BR,
Mohammed Mahmoud.

Does Cisco Prime have support for HP Access Points?

I am trying to sell a solution to a client with dozens of large warehouses with a large existing HP wireless solution. I want to sell them on a Cisco wireless solution involving Prime to manage/monitor their current HP Access Points while we do a phased replacement to Cisco WLC and APs.
I cannot find listed in the documentation whether Cisco Prime has support for the HP access points though. I see it has 'some' support listed for some Aruba controllers, but not anything else.

I am trying to sell a solution to a client with dozens of large warehouses with a large existing HP wireless solution. I want to sell them on a Cisco wireless solution involving Prime to manage/monitor their current HP Access Points while we do a phased replacement to Cisco WLC and APs.
Prime will only support products with a "Cisco" logo.
Note: Prime 2.2 will start supporting Meraki product.

Cisco Multicast Manager Support for NEXUS

Hi All,
Does Cisco Multicast manager support Nexus devices ?
Please help.

No at this time it does not according to the data sheets:
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6335/ps6337/q_a_c67-527951.html
You can use cisco data center manager for managing Nexus devices:
http://www.cisco.com/en/US/products/ps9369/index.html
Download software:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281722751

Citrix goto webinar and cisco webex no support for playbook

http://support.citrixonline.com/en_US/gotowebinar/all_files/GTW010004
As business tablet rim should get support for these 2 important business application

ofcourse it should come from product vendor, either citrix or cisco, but RIM has to put some effort to bring these apps to their platform. People have been crying for webex and skype for past one year but no luck yet. Webex is a widely used apps for meeting and remote support and its pathetic that RIM is waiting for someone to develop an app someday. That strategy is idiotic and so playbook is a great failure.

IOS support for MPLS QoS as stated in RFC 3270 L-LSP

Hi,
does anybody know something about the degree of implementation of RFC 3270 (Multi-Protocol Label Switching (MPLS) Support of Differentiated Services), particularly on the classification based on Labels (L-LSP)?
From what is detailed on the CCO it seems that only Exp-bits based LSP are supported (configuring all links along the path for the proper data plane behaviour based on the Exp-bits values): E-LSP
Thanx in advance
Francesco

I guess, in PPP and LAN environments, E-LSP is the preferred method and in the ATM only L-LSP is possible. Maybe cisco chose to implement only the E-LSP for the LAN and PPP environments, i am not sure though.
Anyone knows this for sure?
Check out http://www.cisco.com/warp/public/732/Tech/mpls/docs/mpls_qos_jayk.ppt for more details on MPLS-QoS

Cisco RV215W and support for Huawei E3276.

I have a number of these devices, bought after testing that the combination did actually Work.
Unfortunately our phone operator (Hi3G Denmark) has shipped the E3276 HiLink version, which seems not to be supported in the RV215W.
Any possibility for support of the Huawei E3276 HiLink in the RV215W firmware?
Best regards
Kristian Hansen

Khansen,
I have reviewed the dongle list for Denmark support and you correct is not supported. If i may suggest try opening a support case with Small Business Support Center. Just keep in mind that demand for this particular dongle would have to be high to support it and add to list.
Dongle list:
https://supportforums.cisco.com/document/127976/rv215w-supported-dongle-modems

Cisco supervisor Desktop support for Windows 7

We are getting ready to rollout Windows 7. We ran into a problem while testing Historical Reports and Cisco supervisor Desktop on Windows 7. Historical Reports installs just fine while CSD give us an error that the operating system is not supported by Cisco. Is there a current version that supports Windows 7?
Our IPCC version is:
Cisco Application Administration - 7.0(1)SR05_Build504
Package: Cisco Unified CCX Enhanced
Any help with this issue would be greatly appreciated.
Thanks,
Yefim

Yes, you are wandering down a long and lonely road.
Repackaging an install package from an .exe (which could be one of a million types of installer, such as InstallShield) to an MSI isn't a trivial task - it's a fairly specialist piece of work.
You can only open MSIs with Orca, it doesn't support other types of install package.
I would suggest if you have a workable solution with ThinApp you'd be best to leave it there...
Aaron

Cisco 8945 IPT support for the UC540?

Hi All,
Is the Cisco 8945 IPT ever likely to be supported on the UC540?
Many thanks
Matt

mchandak,
Honestly I don't know what makes you believe that.
1) the main protocol/standards used on ISDN PRI are from bottom to top, G.703, G.704, Q.921 and Q.931, no matter if you have H.323, SIP, MGCP or SCCP as VoIP signaling protocol.
2) CCME can perfectly "control" a gateway using any of above protocol except MGCP.
3) In the original question, there is no gateway/backend, just one single CCME router.

7300 support for MPLS TE

Does the 7300 currently support MPLS TE, either in the PXF path or software processed?

The 7300 does support MPLS TE. You can choose the version that supports if you have access to the Feature navigator tool which requires a CCO account.

Eigrp support for Vrf-lite on 3550 switches

Folks,
Cisco has added support for EIGRP for Vrf-lite on Sup 720's and Metro 3750 swithches. Just curious if anyone knows timeline when Cisco would be doing the same for 3550 series switches.
Thanks

No current plans at this time for EIGRP for Vrf-lite on 3550 since 3750 platform supports it. Contact your account team for feature request who can contact the business unit with a business case.

MPLS support for 2621XM Router

Hi ,
Can anyone suggest me the IOS for 2621XM Router to support the MPLS LDP.
My router is a Provider edge router.
My flash is only 32 MB .
Thanx in advance
yogesh

Hi
You should use : C2600-spservicesk9-mz
This IOS is SP Services IOS for 2600 & 2600XM series router which support MPLS .
http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps5460/prod_bulletin09186a00801af451.html
Regards
Chetan Kumar
http://chetanress.blogspot.com

MPLS VPN support for VPNv6

All,
which routers and IOS has MPLS VPN support for VPNv6?
regards
Devang Patel

Hello Devang,
in the feature navigator look for the 6VPE feature for example a C7609 with sup720 3BXL and IOS 12.2(33)SxHa2 has the vpnv6 address-family.
see for example
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-ov_mpls_6vpe.html
you still need an MPLS/Ipv4 core or an ipv4 core if using GRE tunnels:
Table 1 Feature Information for Implementing IPv6 VPN over MPLS
Feature Name Releases Feature Information
IPv6 VPN over MPLS (6VPE)
12.2(28)SB
12.2(33)SRB
12.4(20)T
The IPv6 VPN (6VPE) over a MPLS IPv4 core infrastructure feature allows ISPs to offer IPv6 VPN services to their customers.
This entire document provides information about this feature.
MPLS VPN 6VPE support over IP tunnels
12.2(33)
SRB1
This feature allows the use of IPv4 GRE tunnels to provide IPv6 VPN over MPLS functionality to reach the BGP next hop.
This following sections provide information about this feature:
â¢6VPE Over GRE Tunnels
Hope to help
Giuseppe

IOS for MPLS on 1800 & 2600 series router

Hi,
What IOS version to be on 1800 & 2600 series routers to support MPLS

For MPLS Support on 1800 & 2600 Series you need IOS Release 12.3(14)*T or later.
Cisco IOS Release 12.3(14)YT on 1800 Series ISR
http://www.cisco.com/en/US/prod/collateral/routers/ps5853/prod_bulletin0900aecd802d0c05.html
Cisco IOS Software Release 12.3T Features
http://www.cisco.com/en/US/products/sw/secursw/ps5318/prod_bulletin09186a00801abfda.html

Android tablets supported for Cisco Jabber for Android 10.5 ?

Exist a list with tablets support for this realease ?
In release notes only include smartphones.
Anoher question, is about version android client, in google play exits a old version, but not 10.5, any reason for this ?
Thanks in advance.

The tab listed for support is " Google Nexus 10 (Android OS 4.4.x) ". Please refer to the following link for more information;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber_chapter_011.html#CJAB_RF_D3CF90B1_00
Quoting the following link; https://play.google.com/store/apps/details?id=com.cisco.im&hl=en ;we have got the J4A 10.5 listed on the playstore.
- please rate if this helps.

Cisco 2500 & 2600 support for MPLS ???

Similar Messages

Maybe you are looking for