Cisco 2500 dual band router. the hp printer is connects on one band, pc the other help

Cisco 2500 wireless router Dual Band N, HP PhotoSmart C309-g, Windows 7
PC cannot find the printer because it connects on a different band. Cisco uses the same name for both bands. How do I get both devices on the same network.

I also have a dual band router, Cisco's LinkSys EA3500 N750; and the 5.0gHz band is necessary to avoid interference with other equipment operating on 2.4gHz. I put TP-link 2.4/5.0 gHz adapters on each PC (one HP another Sony, both a few years old) and the PCs now work fine, no loss of internet/network access. Would that solution also work for the printer? The printer does not recognize any network (even though the 2.4gHz shows as available and strong on the TP-link device. I used the same name and security code for the new router as the old; again, neither PC had a problem finding it.

Similar Messages

Cisco RV320 DUAL WAN router USB setup with Telstra 4G MF823

I am trying to setup Cisco RV320 DUAL WAN router to work with my prepaid Telstra 4G MF823 device. Could you please assist. My settings are as follows: InterfaceUSB2Connection Type:3G/4G PIN Code:Confirm PIN Code:USB Connection Status:3G/4G modem is not available.Access Point Name:telstra.internetDial Number:Username:Password:Enable DNSDNS Server (Required): 8.8.8.8DNS Server (Optional): 8.8.4.4MTU:AutoManualB

Hi oz000,
Unfortunately we don't have anyone here to assist with this particular issue. Our team here provides assistance for the device standalone, we ensure that the 4G device connects to the network and functions correctly on its own.
-Matt W

Cisco RV220W dual band wifi?

Hello,
Cisco RV220W works in 2.4GHz or 5GHz.
There is any plan to support these bands simultaneously?
Regards,
Viorel

The simultaneous dual-band feature will have to be found on a new product.
FCC will not allow adding this capability using firmware upgrade.

Envy 4500 wireless printer wifi connection too strong! Cancels all other users

Inave wireless printer connected to e wifi, also 2 iPads and iPhone on wifi. The printer over powers the other items and makes using the pads and phone difficult how do I change the settings on the printer as per the network recommendation

Hello jsimps0110,
Welcome to the HP Forums! I understand you are unable to connect your Envy 4500 over a wireless connection. Looks like you have tried a couple of troubleshooting steps to try and fix this issue.
Please follow this HP document on 'Unable to find printer' Over A Wireless Connection.
Make sure you have turned off any Firewalls or Anti-Virus on your computer.
If this document doesn't resolve your issue, then I would suggest connecting this printer with a USB cord. After you have performed this step, try Convert USB To A Wireless Connection.
Please inform me your troubleshooting steps.
I worked on behalf of HP.

Can Vid Chat with one computer login, but not the other--HELP!!!

When I login to my computer using my account, I am unable to video chat. However, when I login using my daughter's login, I can video chat. What gives? As far as I can see the settings are all the same. I can get as far as sending an invitation to video chat with somebody, but then it just churns while waiting for the other person to accept the invitation. In other words, they accept, but the last connection step doesn't happen. It happens when I'm logged in under my daughter's computer login, but not mine. Also, when I get an invitation to video chat, the same thing happens. I accept and then it just sits and churns waiting for that last step. I have a .Mac account and she has an AIM account, but it doesn't help when I switch to my AIM account. Any help would be great. Thanks in advance.

Go to Users/(your account)/Library/Preferences and delete com.apple.ichat.AIM.plist and restart iChat.
10:15 PM Friday; January 11, 2008

I can not see the airplay icon on my ipad3. I have an ipad3, apple tv 3rd gen, networked through a Cisco e4200 dual band router on the n wireless band. Both can access the Internet, but I can not mirror or receive the iplay icon on my devices.

.

No app I'm afraid.
These problems can be multifactorial but often are network related.
You have enabled Home Sharing on all devices?

Dual band network walk-through help

I am using my old Mushroom Extreme to extend my network signal. As advised (so as to maintain bandwidth) I've attached it to the iMac via the network port and, I believe, set it up as a new network (it shows up separately). The iMac receives its wireless signal from my new AEBS (n). This seems to work fine as far as receiving goes (and the range is nicely extended), but I can't send email. Obviously I've configured something wrong in the set up procedure (guessed at some settings). Is there a patient soul out there who can walk me through the proper set-up? Many thanks. BTW, I have two email accounts: the ISP (DSL modem supplier) and the .Mac

Again, many thanks. This forum has long been a sanity saver on many questions. Turns out (as nearly as I can tell), all I had to do was enable FTP. At first, only "internet" was enabled, and that worked fine. A number of the settings in the set-up windows I guessed at. In any case, it works like a charm. Speed check shows nothing has diminished on either network, and I now get a full signal around the stone wall that has been a problem. Of coursem the iMc has to be on, but it always is. BTW, the printger is connected to the iMac. Is ther a way to now print from that printer from may second network? When I try to do that, it says "Apple Talk disabled in System Preferences." But I find no Apple Talk there.

Can't get file to duplex and pull correct media, does one or the other - Help!

Hi All,
I'm using Postscript commands in a file going to an HP4650 (with duplexer installed). After checking the .PPD file for the printer I find that the below listed commands should work - and, used separately they do. I.E. if I only use the duplex command, the file duplexes. If I only use the mediatype, the file pulls the correct paper, but if I use both together, the printer pulls the right paper but ignores the duplex. Can anyone tell me what I'm doing wrong? Thanks!
Duplex Command -
%%BeginFeature: *Duplex DuplexNoTumble
<</Duplex true /Tumble false>> setpagedevice
%%EndFeature
}featurecleanup
MediaType command -
featurebegin{
%%BeginFeature: *MediaType Perf
<< /MediaType (Perf) >> setpagedevice
%%EndFeature
}featurecleanup

Bill,
Thanks for the help.
Unfortunately it doesn't seem that simple. I had both the Audio and Video boxes checked for export, and had something selected in the Multiplexer tab as well (those values varied since I've tried exporting in a few different formats).
I'm going to close Premiere and just make a very simple project and see what happens with export.
Any other ideas on what I might be doing wrong?

Printing JPanel to fit one page, Urgent (thanks for help)..........

hi all,
I am trying to print and can't get the right scaling. My problem is if the JPanel that has lot of images inside it is too big to come on one page width and height then I want the print out to be on one page. If my panel's height is too large to fit on one page and the width is only half of the page or less than page half of the width. Then I want to scale it's height only to fit on one page while keeping the width the same during printing and the images also to be scaled accordingly. And if my height is too small lets say less than half the page and the width is too large too fit on one page then in this case I want to print the original height or keep the height to be shown on the printout as it looks on the screen but scale the width to fit on to one page and the images also to be scaled accordingly. But my following piece of code doesn't honor this though it fits on one page. It keeps on increasing the width or height to fit the whole page thought the width or height is less than that and the images are also expaned accordingly. I want to scale the images too and only fit the width or height if any is greater than one page. Any help is really appreciated. Thanks in advance
RepaintManager.currentManager(panel).setDoubleBufferingEnabled(false);
//Creates and returns a PrinterJob.
PrinterJob printerJob = PrinterJob.getPrinterJob();
Book book = new Book ();
PageFormat pf = printerJob.pageDialog(printerJob.defaultPage());
int pagecount = this.calculatePageCount(pf);
book.append (this, pf, pagecount);
// set pageable
printerJob.setPageable(book);
if (printerJob != null && printerJob.printDialog())
try
//this print() method implements the Printable interface
printerJob.print();
catch (Exception e)
e.printStackTrace();
public int print(Graphics graphics, PageFormat pageFormat, int pageIndex) throws PrinterException
if ( pageIndex >= 1 )
return NO_SUCH_PAGE;
Graphics2D g2 = (Graphics2D)graphics;
// leave room for a page number
double pageHeight = pageFormat.getImageableHeight();
double pageWidth = pageFormat.getImageableWidth();
double scaleFactorH = (panel.getSize().height)/(double)(pageFormat.getImageableHeight());
// set the clip to the size of one page
g2.setClip(0, 0, (int)pageWidth, (int)pageHeight);
// translate down the graphics object to the top of this page
g2.translate(0f, -pageIndex*pageHeight);
// scale to fit the width
g2.scale(scale,1.0/scaleFactorH);
panel.paint(g2);
return PAGE_EXISTS;
//method to calculate
public int calculatePageCount (PageFormat pf)
double pageHeight = pf.getImageableHeight();
double pageWidth = pf.getImageableWidth();
double componentWidth = panel.getSize().getWidth();
System.out.println("THe imageable width is " + pageWidth);
if (componentWidth > pageWidth)
scale = pageWidth / panel.getWidth();
double componentHeight = panel.getSize().getHeight() * scale;
printPageCount = (int)Math.round(Math.ceil (componentHeight/pageHeight));
return printPageCount;
Is there a way to fix this any help is appreciated.
Thanks

Dear Nadia,
Thanks for the info.
If I understand it correct I can make a copy of my actual css file.
Rename it this copy to e.g. print.css
And then make some changes such a letter fonts and colour
Linking this css file to my pages and specify it is only for `print1`
Right?
I`m using a template so if I amend the template like this and have all pages updated automatically that should do the trick?
Right?
Is there somewhere where I need to mention that e.g. the page needs to be reduced onto 95% by printing?
Or will the print.css do the trick?
Sometimes I get confused on what css can do and it can do a lot.
Many thanks for helping me out here.
Kind regards
martine

External Hard Drive doesn't work on one usb, but works on the other, help?!

Hi there,
I have a very strange issue here. When connecting my external portable Maxtor 60GB disc to my MBP, I usually use the usb port on the right side of my laptop. However tonight, I connected it to the left usb port and noticed a horrible clicking sound coming from the otherwise silent drive. It made repeated clicking/scratching sounds and wouldn't mount and crashed OS X. Then I connected it to the right hand USB port and it mounted and worked like nothing else happened.
Has ANYONE experienced/can explain this bizarre phenomenon? Is it time to trade in my Maxtor for a new drive? I've only had it for a year and a half. Thank you!!

It's a power issue, use a 2-1 USB cord, a powered hub or an external power supply.

My home share is not working i have tried everything it works on one computer but not the other help!

I have tried uninstalling and reinstalling itunes i have tried messing with my avast and I cant get anything to work please help me! it works on another computer in the house but everytime i try to click on his library it says it loading his library and then stops and goes to my music. plz help!

When normally powering the phone, there would not be a loading bar, you would just see the Apple logo. You can try a reset of the phone, hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
You can take the phone to Apple, by making an appointment at the Genius Bar to have the hardware checked. Apple handles warranty and post-warranty issues, not Verizon. Have Apple look at the hardware to see if there are any problems.

Same problem as all the others - HELP!! Where is my Ipod?

Like everyone else, Itunes no longer detects my Ipod. I've spent night after night trying everything in the "troubleshoot" list and even met with the "genius" in the apple store.....all to no avail.
Basically, iTunes wont recognize by Ipod or crashes when it's plugged it. My Ipod is about 1 1/2 yrs old and works fine on other computers (except my home computer where all my music is)
I've tried everything including
1) The 5 R's
2) Reinstall COM interface for Ipod Service
3) Quick fix
4) Removing and installing Itunes
5) IPodService.exe Alert
6) Empty Temp directory
7) Windows Installer files
AND MORE......
After doing all these steps, I came the closest last night. Itunes recognized my Ipod but then crashed when it got to update song 651. Since I did a RESTORE earlier I still have no music on my Ipod. Now it continues to not recognize and typically freezes up Itunes when plugged in. It still is recognized as a hard drive through Explorer and is detected by the Updater.
Since it works on my work computer and at the Apple store there is some other conflict with my home computer.
HELP!!!!
Stumped Stacey

Have you tried creating a new user account (yes, I know it means going back to square one as far as personal customisations and settings is concerned) and rebuilding the iTunes library on the new user account You should not need to recreate the song files themselves - well at least not the ones which are .mp3s provided they are still on the HDD - just point iTunes at them and it will incorporate them. You could at least try it as an experiment - you should be able to revert back if it is no help.

Best way to have dual band on the 2.4ghz mi424wr

I have a cisco eA3500 dual band connected WAN to LAN to my mi424wr (not dual band). After much testing a gazillion setting combinations, i have confirmed that i want to use the cisco dual band router as my wireless connection for my client devices.
This works fine now with the one problem that i cant control my settop boxes from my other client devices (mostly iOS devices) i believe because they are technically on separate networks...devices on the cisco and the stbs on the mi424wr.
A secondary issue is that i want to add additional dual band network coverage through the house, and i hope both issues can be solved by the following:
From another recent thread related to accessing this secondary router, i was instructed to deactivate DHCP on the cisco and attach it to the mi424wr LAN to LAN. I am assuming in bridge mode. I never had to do it because my original problem was resolved before getting to that step.
So, if i do this above step, will i still see the cisco SSID, and be able to connect to it at dual band as i do now? Will the cisco still be a "separate" network but/will i be able to see all devices (and control the cable boxes?)
Even better, if I cat 5 another identical cisco from the first cisco and set it in bridge mode(run it to the second floor) what do I need to do, if possible, to be able to move freely between those to signal sources without having to select a different network?
Thanks in advance for any input.

To answer your question what you have been advised to do is setting up your Cisco as an AP.
1. On your Actiontec check to see what range it is assigning DHCP in. If necessary limit/ adjust the range so you have a series of IPs you can use for static IPs. If your DHCP range is 192.168.1.100- 150 that is fine. Your Actiontec router is by default normally 192.168.1.1.
2. On your Actiontec you can either turn of or leave on the WiFi. If you leave it on select a channel 1-6-11.
3. On your Cisco turn off the DHCP server and assign it a static WAN IP. If your Actiontec is 192.168.1.1 you could make your Cisco 192.168.1.2. Set the 2.4 Ghz radio to a channel that is not the same as the channel on the Actiontec. I also recommend that you use a different SSID if you left the Actiontec's radio on. Set your 5 Ghz radio to whatever channel you like and give it a SSID that is different than any of the other SSIDs you have used. Connect the Cisco to the Actiontec as you said LAN to LAN. If you want to add another Cisco, use another channel, another SSID and connect LAN to LAN from eithet a port on the Actiontec or from the first Cisco.
Another option to connect either the first or second Cisco to your network is to use a MOCA adapter which will replace the Ethernet cable by using the coaxial cable that your TV is using. One of the real nice features of the Actiontec is the built in MOCA. Makes it very easy to install additional APs to improve WiFi coverage.
Bridging is another option but to keep it reasonably simple and since you want to keep your STB on your primary network for administraive purposes using your Cisco as an AP is a very good choice.
Some people on this forum swear at their Actiontecs, but I have no complaints about mine. The only time it has rebooted is when it downloaded a firmware update and I experienced a power outage that lasted longer than my UPS.

DUAL BAND ROUTERS

I have a cisco 6500 dual band router.
For some reason when going through the setup I can only get my HP 410 to see the guest network and not the primary network. The HP utilities can see it when run from my Notebook but the printer refuses to see it.
On top of that I can see all my neighbors routers as i live in a townhouse development.....
I can connect using the guest network however it is a pain flipping over to it everytime i want to print something.

Hi,
From your router homepage enter the Wireless settings, then select Manual setup.
Either provide the 2.4GHz network a different SSID and connect to it or disable the 5GHz broadcast.
Once both of the printers are connected to the 2.4GHz network you will be able to print, yje HP printer does not support 5.GHz and therefore dannot locate the network:
802.11n can operate in both the 2.4GHz and 5.0GHz frequency bands (which makes it dual band). However, not all devices that support 802.11n support both frequency bands. So you can't connect a device that uses 802.11n 2.4GHz to a wireless router set to operate at 802.11n 5.0GHz only. All HP printers that support 802.11n use 2.4GHz only
http://www.hp.com/global/us/en/wireless/wireless-network-help.html
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error in Cisco 2500 series Wireless Controller

I have this error in Cisco 2500 series Wireless Controller
The AP type Cisco AIR-CAP35021-A-K9
I cann't connect the client to AP when i try to connect i get this error on Cisco 2500 series Wireless Controller But the AP get ip .
Please can any on help me .
Client Excluded: MACAddress:Base Radio MAC : Slot: 0 User Name: unknown Ip Address: unknown Reason:802.11 Association failed repeatedly. ReasonCode:

Duplicate posts.
Go here: http://supportforums.cisco.com/discussion/12142556/cisco-2500-series-wireless-controller

Cisco 2500 dual band router. the hp printer is connects on one band, pc the other help

Similar Messages

Maybe you are looking for