Cisco 2600 router with 4A/S module can be terminal server

I have a cisco 2600 router with 4A/S module, can it become the terminal server? If yes, which kind of octal cable should I choose to connect to other cisco routers console ports? Thanks a lot

The commands mean that R1's console is connected using the first RJ-45 cable and is available on port 2001, R2's console is connected using the second RJ-45 cable and is available on port 2002 and so on. Remember that the ports are numbered as 2000 plus the line number. Hence, the first port is 2001. If you have more than eight devices and have connected a second CAB-OCTAL-ASYNC cable then you need to add a similar configuration line with the port numbers starting from 2009 till 2016.
In your configuration u configured 9 ports. So please add second cable for another 8 ports.
To connect to the console of a device, telnet to the terminal server router's loopback address and specify the port number associated to the device. For example, to connect to console of router R1 (from our example) type telnet 192.168.12.1 2001 in the Run dialog box from your PC.
For further information click the below url
http://www.cisco.com/public/technotes/smbsa/en/us/internet/config_cisco_router_term_server.html#trouble

Similar Messages

  • How to do destination NAT in a 2600 router with IOS 12.3?

    Hi All
    I have a 2600 router with two LAN interfaces which I am using for a PoC and has the following settings:
    FE 0/0 - 10.0.0.1/24 - client LAN - inside 
    FE 0/1 - 10.1.1.1/24 - server LAN - outside 
    The direction of the flows are from the clients to the servers. What I would like to achieve is when clients accessing the web server 10.1.1.10, this to be replaced by 10.1.1.100.
    I have tried the above a few times but doesn't work. Is the above possible? And If so please provide me with a sample config.
    Many Thanks
    [email protected]  

    Yes, you can do this.  You don't need destination NAT.  Source NAT translations work both ways.  This should work:
    ip nat inside source static tcp 10.1.1.100 80 10.1.1.10 80
    int fa 0/0
    ip nat inside
    int fa 0/1
    ip nat outside
    The bigger question is why you'd want to.  Just because you CAN do something doesn't mean you SHOULD.  Unless you have the 10.1.1.0 network subnetted or some sort of firewall/blocking in place, both IPs should be reachable by the hosts.  Why not just have them go directly to 10.1.1.100 instead of going to 10.1.1.10?  If there's a firewall or similar blocking 10.1.1.100, why not adjust your firewall settings instead?  You could have a valid reason for doing this but I can't think of very many scenarios off the top of my head where this would make sense.  If you can post more details on what you're trying to accomplish, you might get better advice on a better way to solve the problem.

  • Cisco 3925 router with an ATM E3 card that never goes down!

    Hi all,
    We a Cisco 3925 router with an ATM E3 card (NM-1A-T3/E3) configured as below with 1 PVC. we see that the ATM subinterface we created for the PVC never goes down! not even when the WAN link is down! The problem with this is we are tracking the line protocol of the ATM sub interface to have VRRP failover to standby router. But because of this issue only BGP goes down whenever the WAN is down & line-protocol of the Subinterface remains up, the failover never happens & site is down. We can configure VRRP to track reachability of a BGP route as workaround but I would like an explanation or troubleshooting steps to check whats the trouble with current setup?
    Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.1(2)T4.1, MAINTENANCE INTERIM SOFTWARE
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2011 by Cisco Systems, Inc.
    Compiled Tue 30-Aug-11 08:44 by prod_rel_team
    card type e3 1
    interface ATM1/0
     description Link to PE
     mtu 1500
     bandwidth 34010
     no ip address
     no ip proxy-arp
     logging event subif-link-status
     no atm ilmi-keepalive
     no atm enable-ilmi-trap
    end
    interface ATM1/0.101 point-to-point
     description PVC to MPLS PE
     mtu 1500
     bandwidth 2500
     ip address a.b.c.d 255.255.255.252
     no ip proxy-arp
     ip flow monitor FMforIP4in sampler ata1to100 input
     ip flow monitor FMforIP4out sampler ata1to100 output
     ip nat outside
     ip virtual-reassembly in
     no atm enable-ilmi-trap
     snmp trap link-status
     pvc 1/101
      vbr-nrt 8192 8192 1
      vc-hold-queue 2048
      oam-pvc manage
      oam retry 3 5 1
      oam ais-rdi 15 3
      encapsulation aal5snap
      protocol ip inarp
      queue-depth 5 3
      service-policy out Edge_Queueing
    end
    Thanks a lot in advance!

    Your router has some configuration on it already and it would help us give you better advice if we knew what is already in the configuration. So would you post the output of show running-config (if there is sensitive information like addresses and passwords you can mask them out.
    Changing the configuration register was a good start. I have a couple questions/observations that may help you get started. I notice what appears to be the same public IP address on Gig0/0 and on multilink. Did you get that address from your ISP? If so what kind of connection do you have to the ISP?
    In your description you tell us that Gig0/0 is connected to a small switch, which I assume is for the LAN of your network. But that also is the interface where the public address is configured. So I am confused whether this interface is for LAN or for connecting to the ISP. Can you clarify this?
    HTH
    Rick

  • HT4199 I have a new iPhone 4s.  I have a home wi-fi network using Cisco Linksys2000 router with all settings per this article - phone will not see network if set to 5 GHz channel width - solution??  2.4 works but is not optimal with other devices in home

    I have a new iPhone 4s.  I have a home wi-fi network using Cisco Linksys2000 router with all settings per this article - phone will not see network if set to 5 GHz channel width - solution??  2.4 works but is not optimal with other devices in home (computers; tivo).  Have others seen this?  Any advice is much appreciated.

    Stephen Spark is right - your best alternative is to use a simultaneous dual band wireless router like the AirPort Extreme. Your Cisco Linksys2000 is not a dual band router, meaning that it will be constrained to operate at the slowest speed of all the devices on your network.
    The AirPort Extreme's dual networks will support all your 802.11n devices as well as all your 802.11b/g devices on both the 2.4 and 5 GHz frequencies simultaneously.

  • SharePoint site connection with Office Professional Plus 2013 on Terminal Server

    Hi,
    Background info:
    We use multiple Office 365 E3 subscriptions (12 now) and also have an Windows Server 2008 R2 Terminal Server.
    The users may install Office 365 Pro Plus on their local machines and are able to connect to SharePoint online with the Office applications. Now not everyone has a PC so they log in to one of the two Windows Server 2008 R2 Terminal Servers. I do
    however want one big happy family working with SharePoint so I installed Office Professional Plus 2013 and tweaked the Group Policies so that the start up screen and movie arent beeing showed.
    When I log in with my test user on the Terminal Server (who has a E3 subscription) I miss the feature to add a location (to connect to the SharePoint site). I just do not have that feature. When I log in with my domain administrator account who also
    has an E3 subscription, I am able to add a connection.
    There is SO much info on the web about Office 365/Terminal Servers etc but I am not able to find what I was looking for.
    Question:
    What do I need to do so our Domain Users who log in to the Windows Server 2008 R2 Terminal Server are able to open/save files directly to the SharePoint site? How do I add the SharePoint location as shown in the image:

    Hi,
    SharePoint would not exist when Office 2013 initial installed.  After you save a file to a SharePoint library for the first time, you can click
    Save as you do for any file. Please try the following steps:
    1) Add the document (Word file) to a document library on a SharePoint 2013 site
    2) Click on the file within the SharePoint document library.
    3) Click open in Excel
    4) Save the file
    5) Close Excel
    6) Open Excel, select new Blank Workbook, File, Save As, "SharePoint" should now appear.
    Regards,
    George Zhao
    TechNet Community Support

  • Cisco 2811 Router with 3 ADSL card and load balancing

    Dear All,
    I have few queries:
    1. Does Cisco 2811 Router support 3 ADSL card?
    2. We are the ISP. I want to do load balancing with 3 dsl
    line on Cisco 2811 Router.
    Please send me the linke for this configuration.
    Thanks/Regards
    Atul

    hi
    In 2811 you have 4 HWIC and 1 NME you can install 1-port ADSL WAN Interface Cardon the HWIC slots.
    Also just enable 3 default (equal cost) routes towards the interfaces which will take care of the load balancing.
    if you need more info and inputs do post out with ur requirements along with network topology in place at present..
    regds

  • Cisco SRP520 Router with NexStar FX NAS

    How do i get the Cisco SRP520 Router to assign the external IP to my NexStar FX Nas,
    i have a Harddrive in the NexStar FX Nas,and the files is setup to FTP, but i cant access it from a diffrent network, if i'm connected to the network it works but asoon as i use a diffrent network it doesnt pick up... i also have a working dyndns account setup on router can i use the dyndns account to ftp?
    for Example: ftp://site2.dyndns.org

    Hi Ruan,
    Just create a port forwarding rule for application you wish to expose to the internet.
    Network Setup > NAT > Port Forwarding.
    The Admin Guide has more detail if you need it.
    Andy

  • Problem with Adobe Pro and Reader on terminal server

    Hi,
    We have have a Terminal Server environment with Adobe Pro and Reader. We have security for Adobe Pro, so only certain user has access to Adobe Pro and all users has access to Adobe Reader.
    Some users receive many email with pdf's attachments in Outlook and need to print these attachments. They use the Outlook function to print email and attachment automatically. The users who has access to Adobe Pro can print attachment automatically with no problem.
    The problem is user who only have access to Adobe Reader. The user can't print attachment automatically with the email, only the email is printed. But, they can open attachment and print with Adobe Reader. But, it's impossible to open each attachment because there are so many.
    Thanks for your help.
    Jonathan

    Hi,
    So if I understand correctly,
    1. You have installed Acrobat Pro & Reader on a Terminal server.
    2. You have created a security group in your Active Directory Users & Computers for users having access to Acrobat
    3. You have set permissions on C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe and C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrotray.exe on the terminal server and provided access only to the security group created above.
    4. Users are accessing the Terminal server through RDWeb or connecting remotely through MSTSC (RDP) or using a .RDP file
    5. Users get emails with PDF attachments and print the mail directly without opening the PDF in Reader.
    Users check the box to print the attachments with the mail (see snapshot below):
    Some questions:
    1. What is the OS and platform (x86 or x64) of the terminal server?
    2. What are the versions of Acrobat & Reader on the terminal server?
    Thanks,
    Vinod

  • I have a Cisco 2811 router with a NM-2FE2W module installed, it shows up in Sh diag but it says it is disabled?

    I installed NM-2fE2W module on the 2811 router on the bottom which I guess is slot 1.
    It shows up in Sh diag as disabled how can I correct this? I have the same IOS as on packet tracer 6.1 ver 12.4 (15)T. I have tried upgrading the IOS and downgrading IOS.
    Slot 1:
    Unknown (type 919) Port adapter
    Port adapter is disabled
    Port adapter insertion time unknown
    EEPROM contents at hardware discovery:
    Hardware Revision : 1.0
    Top Assy. Part Number : 800-21601-02
    Board Revision : B0
    Deviation Number : 0-0
    Fab Version : 01
    PCB Serial Number : JAE0831RLPQ
    RMA Test History : 00
    RMA Number : 0-0-0-0
    RMA History : 00
    Product (FRU) Number : NM-2FE2W-V2=
    EEPROM format version 4
    EEPROM contents (hex):
    0x00: 04 FF 40 03 97 41 01 00 C0 46 03 20 00 54 61 02
    0x10: 42 42 30 80 00 00 00 00 02 01 C1 8B 4A 41 45 30
    0x20: 38 33 31 52 4C 50 51 03 00 81 00 00 00 00 04 00
    0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
    0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    Don't know for sure what's the cause of your issue, but some hardware requires a minimum IOS version and/or feature set to utilize.  Also, some hardware requires additional configuration commands to enable the hardware.

  • Can a Cisco 2600 router do PPTP,L2TP, and IPSec?

    General question.

    2600 supports L2TP and PPTP with MPPE with an IP PLUS version, and IPsec with a firewall version.

  • CISCO 2600 Router Flash Image

    Hi guys and gals. Not pay attentiong while performing an update, I mistakingly confirmed an erasure of the flash system on my 2600 series router. The dreaded rommon> is returned on reboot. I tried to download the image files from Cisco.com but the password security issues they do not have is preventing me from doing it. If anyone has a copy please help.
    Thanks
    Wade

    No image to send but I can tell you that if you send a blank e-mail to [email protected] from the e-mail address you registered your CCO profile to Cisco will automatically reset your password and e-mail it to you in a few minutes (usually).
    Hope this helps.
    Please remember to rate all replies

  • I cannot connect to belkin 54G wirless router with mac book but can ipod T

    as it say on the tin i cannot connect a mac book to belkin wireless router but can with my ipod touch, I get a generic error message. Any clues guys.

    weefus,
    As dwb stated, it is possible that the full site has simply not propagated fully (especially if it is a brand new site). As a couple of days has passed, if you are still experiencing issues, you can reach out to our support team via x.co/support and we'd be happy to take a look for you.
    Sincerely,
    ^J
    Go Daddy Social Media Team

  • I cannot log onto my cisco n router from firefox. I can log onto it from ie7 also i can ping it from tower machine any suggestions for where i have incorrect se

    prior times (cannot remember how long ago, it worked ok. i powered router down and let set for 10 minutes then powered back up. rebooted computer (log off, powedr down then back up, then log on as admin. i assume i got a firefox step set incorrect. firefox allows mwe to log to other sites (mail, livefire, etc with no problem. all other functions seem to work. this is currently just an aggravation but i realy prefer firefox over ie and only keep ie on machine because some programs seem to require it for operation. (windows updates, etc.

    What happens if you try to open that login page by typing the IP that probably starts with 192.168 in the location bar and press Enter?
    *http://192.168.???.???
    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

  • NEED URGENT HELP ON MY CISCO 2600 ROUTER.

    This machine is giving me hard time. The problem with it is that it keeps on rebooting. I have tried to even load another IOS. But it is not working out. It is bringing this output......========= Dump bp = 2C66478 ======================
    2C66378: 0 0 0 0 0 0 0
    0
    2C66398: 0 0 0 0 0 0 0
    0
    2C663B8: 0 0 0 0 0 0 0
    0
    2C663D8: 0 0 0 0 0 0 0
    0
    2C663F8: 0 0 0 0 0 0 0 FD0110D
    F
    2C66418: AB1234CD FFFFFFFE 0 0 800261A4 2C66478 2C183EC 8000001
    C
    2C66438: 1 175C7D59 70600180 DCBE0B00 C164 0 100 2C664A
    0
    2C66458: 2C668E0 0 0 0 0 0 0 FD0110D
    F
    2C66478: AB1234CD FFFFFFFE 0 0 800261C8 2C668B8 2C6642C 8000020
    C
    2C66498: 1 A35C1E12 15A 8000F9F4 2C67160 0 15A 8000F9F
    4
    2C664B8: 2C677E0 0 15A 8000F9F4 2C67E60 0 15A 8000F9F
    4
    2C664D8: 2C684E0 0 40 8000F9F4 2C68B60 0 40 8000F9F
    4
    2C664F8: 2C691E0 0 0 8000F9F4 2B657E0 0 0 8000F9F
    4
    2C66518: 2B65160 0 0 8000F9F4 2B64AE0 0 0 8000F9F
    4
    2C66538: 2B64460 0 0 8000F9F4 2B63DE0 0 0 8000F9F
    4
    2C66558: 2B63760 0 0 8000F9F4 2B630E0 0 0 8000F9F
    4
    ========= Dump bp->next = 2C668B8 ======================
    2C667B8: 2B73E20 0 0 8000F9F4 2B737A0 0 0 8000F9F
    4
    2C667D8: 2B73120 0 0 8000F9F4 2B72AA0 0 0 8000F9F
    4
    2C667F8: 2B72420 0 0 8000F9F4 2B71DA0 0 0 8000F9F
    4
    2C66818: 2B71720 0 0 8000F9F4 2B710A0 0 0 8000F9F
    4
    2C66838: 2B70A20 0 0 8000F9F4 2B703A0 0 0 8000F9F
    4
    2C66858: 2B6FD20 0 0 8000F9F4 2B6F6A0 0 0 8000F9F
    4
    2C66878: 2B6F020 0 0 8000F9F4 2B6E9A0 0 0 8000F9F
    4
    2C66898: 2B6E320 0 0 0 0 0 0 FD0110D
    F
    2C668B8: AB1234CD FFFFFFFE 0 3000000 80026214 2C670F8 0 300040
    C
    2C668D8: 1 8DB14C70 0 8300FECE 2B050C2 0 0 8300FEC
    E
    2C668F8: 2B057A2 0 0 300FECE 2B05E82 0 0 300FFC
    4
    2C66918: 2B01D8A 0 0 8300FFC4 2B01ECA 0 0 8300FEC
    9
    2C66938: 2CD38C2 0 0 300FFC4 2CCF22A 0 0 300FFC
    4
    2C66958: 2CCF4AA 0 0 8300FFC4 2CCF72A 0 0 8300FFC
    4
    2C66978: 2CCF9AA 0 0 0 0 0 0
    0
    2C66998: 0 0 0 0 0 0 0
    0
    ========== Dump bp->previous = 2C6642C =====================
    2C6632C: 0 0 0 0 0 0 0
    0
    2C6634C: 0 0 0 0 0 0 0
    0
    2C6636C: 0 0 0 0 0 0 0
    0
    2C6638C: 0 0 0 0 0 0 0
    0
    2C663AC: 0 0 0 0 0 0 0
    0
    2C663CC: 0 0 0 0 0 0 0
    0
    2C663EC: 0 0 0 0 0 0 0
    0
    Then it says (Software forced reload.) Pliz help.

    This does not look good. Boot into rommon. Use the "verify flash:c2600*.bin" command to check the integrity of the image.
    If this issue impacts your production environment contact TAC for a quick resolution.
    HTH
    --Leon

  • Cisco 4507R WCCP with blue coat SG 8000 as proxy server integration

    Dear All,
    I installed the blue coat on one of the vlan with users in diffwrent vlans. The core 4507R is used with L3 vlans as gateway for the respective vlan users. Now i need to configure both core switch and blue coat as proxy server so that all the users in different vlans access internet websites without configure the blue coat proxy address but the core switch would redirect the users request to the blue coat proxy server. I tried with latest IOS upgrade to the switch eventhen i could not get the cmds related to WCCP blue coat documents suggest to use in core switch to configure the proxy server of SG8000
    Could any one help me to solve this issue.
    Thanks
    swamy

    Following link may help you
    http://www.cisco.com/en/US/products/hw/switches/ps4324/products_configuration_guide_chapter09186a008062cfc6.html

Maybe you are looking for

  • Can you have more than one plan at a time? i.e.: After Effects CC Single App   Photography

    I can't afford to pay for the whole CC package, but I really miss Photoshop in my workflow. In all the promotional stuff, the single app plan is offered to those who only want "one or two" apps, but I'm guessing the two only applies to PS+LR Paying a

  • Recovering files from external hard drive

    My external hard drive stopped working. Everytime I tried to access it, I'd get one or more of the following messages: "Time Machine Error. The backup disc is not available. Time Machine couldn't complete the backup to "My Passport for Mac. The backu

  • System hang after clicking "Run" to launch "SBO_Welcome.hta"

    Hi, My client encounters a pop up window "Open File - Security Warning" upon logging into SAP. It is a message to run "SBO_Welcome.hta" which is located on " SERVER\B1_SHR\Help\EN". When the "Run" button is clicked to launch the above mentioned file,

  • Text display issues with htmlText, Embedded Font

    Hey All, I'm having an issue with the display of my hyperlinks in a textfield that is using embedded fonts. It offsets the hyperlinks to the left along the line they are on and the underline doesn't stretch all the way under the text field. The text

  • Nokia 5233 new firmware changes?

    Hi, i recently upgraded my nokia 5233's software version from 21.1.102 to 40.1.003. but dont notice any changes except the here and now app. Can i get the change log for v40.1.003??