Cisco 2950 - 24 WS switch express install issue

Hi Guys,
Got a Cisco 2950 24 port switch that I need to setup and I can't seem to get the page for Express install
In firefox when trying to connect to 10.0.0.1 I get the message "connection was reset" in internet explorer "page cannot be displayed"
when doing a arp -a I can see that the switch does get the IP address 10.0.0.1 and I can also ping the switch ok.
Have followed the instructions and reset the switch and all the mode lights are green etc.
my ethernet adapter does get the address 10.0.0.2 given from the switch (however connectivity is limited / not sure if this is supposed to be like this or not)
have tried earlier versions of firefox (even 1x 2x 3x 4x) etc and also older versions of IE incase there is something weird going on there. have also tried using a mac and trying safari which gives similar results.
So i think the http server is enabled on the switch, as it should be by default when it is reset etc. according to cisco's documentation.
I know using the console cable would be alot easier however I don't have one available and not easy for me to get
any ideas? has anyone ever successfully been able to use this express install web page on a cisco 2950 before? It has Version 12.1(22)EA14 so express install should work on this switch!
cheers,

managed to get hold of a console cable. checked switch and http-server command was enabled so have no idea why this feature was not working...
did some research and someone suggested that it is fussy with the version of java you are running on the pc ( requires old version of java?) .. possibly that may have an influence who knows?
Think ill just carry around a Console cable in future!

Similar Messages

10g Express install issues on Win Vista

I've installed 10g express on Windows Vista and I keep receiving the following error when trying to start the database --startDB.bat:
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
'net' is not recognized as an internal or external command,
operable program or batch file.
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
'net' is not recognized as an internal or external command,
operable program or batch file.
C:\oraclexe\app\oracle\product\10.2.0\server\BIN>
Anyone have any ideas on what's causing this issue? Thanks in advance

What's causing the issue is the fact that XE is not supposed to be run on Vista! Well, it could be all sorts of other things, but fundamentally XE is not supposed to run on Vista!
Vista's security model is incompatible with Oracle's way of working. They had to bring out 10.2.0.3 to get the Enterprise Edition/Standard Edition working on it, after all... and no such upgrade to XE has taken place, as far as I am aware.
This thread discusses a possible workaround, but I have no idea if it works or not:
Install on Vista
Otherwise, depending on your hardware capabilities or the reason why you are intending to deploy this, I would be either (1) using the 10.2.0.3 Enterprise Edition (freely available for home learning purposes at http://www.oracle.com/technology/software/products/database/index.html ; or (2) installing VMware Server (freely available at www.vmware.com) and installing Linux or Windows XP/2000 in that and running XE on top of those supported OSes.

Dot1x Issue on Cisco 2950 Switch

Hi,
I have a Cisco 2950 switch running with c2950-i6q4l2-mz.121-22.EA6.bin image.When i configure a Dot1x Port Control Auto on each interface the utilization on the Cisco 2950 goes high.The moment i remove Dot1x Port Control Auto command on every interface utilization comes to normal.
Please let me know if any idea on this why the switch is behavior like this....
Thanks & Regds,
Lalit

Most likely you are hitting a bug although I did not find anything in the bug toolkit that could resemblance this.
What process is stealing all your cpu? Please do a `show proc cpu` for me. I would start by grabbing the EA13 release and try the same with that to see if you experience the same issues.

Cisco 2950 switch config issues

WOOHOO that worked! Have been on another site for a week trying to get this done.
Now, how do I change the default SSH port from 22 to the port I want?

Hello,I have a Cisco 2950 switch that I am trying to get working correctly. I want to be able to make console and SSH connections, but not Telnet.
Texten!config tusername admin secret Pa55w0rden secret Pa55w0rd!line con 0password Pa55w0rdlogin local!line vty 0 4password Pa55w0rdlogin localtransport input ssh!hostname GEMSWI0001ip domain-name domain.localntp server 192.168.217.10!crypto key generate rsa2048username admin priv 15 secret Pa55w0rdaaa new-model!service password-encryption!ip http serverip http port 65410!!vlan 128name Officeint vlan128ip address 192.168.128.254 255.255.255.0shut!vlan 217name GEMint vlan217ip address 192.168.217.254 255.255.255.0shut!vlan 999name GEM-Adminint vlan999ip address 192.168.255.251 255.255.255.248no shut!int fa0/47description GEMCON0000-1switch access vlan 999switchport mode accessswitchport...
This topic first appeared in the Spiceworks Community

Apple wired Dot1X - on Cisco 2950 switches

Hi, I have an issue with Apple desktop computers running 10.7 and 10.8 MacOS.
The problem is that we have only 2950 switches and we are very limited with what we can do on them, so we wanted basic DOT1X user authentication and VLAN placement. Those two are working great, except when user logs off, Mac stops sending DOT1X and port becomes unauthenticated. We alleviated that issue by using guest-vlan for failed dot1x authentications, but now we have a problem that once user logs in, there is no session change on 2950 and it doesn’t even try to authenticate user until we bounce the port.
Is there any way to fix this, on Cisco switch or Mac computer? One of the things that crossed my mind is bouncing port on Mac PC using some kind of logon script?
Has anyone else had this issue and was able to solve it?
Thanks.

Hello Align,
Cisco 2950 switch with 12.1(9) supports 802.1 x authentications. As you are saying that you already configured 802.1x authentication and its working fine. I think there is problem with your MAC OS configuration. Please follow the below link to configure 802.1x on Apple.
http://support.apple.com/kb/ht3326

Cisco 2950 l2 switch console problen

Hi all, I got 2 old Cisco 2950 catalyst switch yesterday. But when I try to open console of both switches I am getting only blank terminal. I tried to open with putty and scureCRT, I tried another console cable, tried on another PC, but no luck.
I think previous owners might have disabled console. So is there any other way to take console or delete start-up conf file??

Hello,
I don't have a 2950 around to test, but as far is I know disabling the console is achieved issuing the "no exec" command on the console line, so it is a command in the start-up config. Therefore booting the switch in the rescue image should not take into account that command, so the console should be available in that mode. Have you tried that? To do so hold down the MODE button located on the left side of the front panel, while you reconnect the power cable to the switch. Release the Mode button after approximately 5 seconds when the Status (STAT) LED goes out. When you release the Mode button, the SYST LED blinks amber.
Here is the rest of the procedure:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/12040-pswdrec-2900xl.html
PS: I presume you are using the correct COM port and terminal settings, however I mention them bellow just to make sure:
Bits per second (baud): 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: Xon/Xoff (or none, in some documents)
You can check if you are using the correct COM port in System Tools/Device Management if you are using a Windows device.
If this doesn't work check if the flash card can be removed (not sure on that old model), perhaps you can use it in other device and delete the startup config.

Cisco 2950 MT-RJ ports - Connect two switches?

Hi Everyone,
I'm wondering if I can connect two cisco 2950s together via the two MT-RJ ports they have?
Basically, I'd like the fibre ports to be the trunk between the two switches if possible
I have two of these:
Thanks!

Hi,
Yes, that is possible. As long as your fiber patch cable is good there should be no issues.
HTH

Swf express install ie 6 issue

http://tier3studios.com/pikecon/index.php
Hey guys...so i have a site with a swf that works fine on firefox and ie7+8 but when it comes to ie6 it keeps prompting for the user to "CLICK OK TO CONTINUE LOADING THE CONTENT OF THIS PAGE" this will be pretty anoying for the users. I have the latest flash version...
so how come this thing keeps asking that question? how can i fix it....I know the swf express install is for upgrading flash player but the prompt doesnt go away.
Another thing is my form on that page..im unable to click those text fileds and get a cursor...using ie6 and 5 ...it works well in everything above that..
Help?
Thanx

I fixed it thanx

What is the default tx-ring-limit on Cisco 2950 switches?

Hello,
we are working on a project involving changing different buffer/queue sizes and we are trying to discover the default tx-ring-limit size on Cisco 2950. Do you know a command that will show us this value?
Thank you in advance.

I think that the default tx-ring-limit is probably 128. I couldn't find this value on a specific document regarding the 2950, but i found it on other cisco devices, so my guess is that it could be the default also for 2950 (although it's a bit old:) )

Configuring wired 802.1x with Cisco 2950 and NPS 2012 problem

Hi,
I am trying to setup wired authentication on my corporate network. For testing purposes, I have setup a Cisco 2950 switch for RADIUS authentication.
On the first day of the test, access messages were appearing on the event log of the 2012 Server and we were trying to address the issues with EAP and policy.(Network Policy and Access services)
Then, suddenly no events are written to the event log for the wired authentication. Accounting data is written to the log file at c:\windows\system32\logfiles, but nothing happens on the event log as if the NPS is not answering. We are using the same server for wireless 802.1x and all is working fine.
Checking the wired autoconfig log on the client, Restart Reason : Onex Auth Timeout appears.
Logging seems to be configured properly, there are no entries in event log. Below is the debug information from the 2950 switch;
KAT2-BATISW1#
00:18:28: dot1x-registry:dot1x_port_linkchange invoked on interface FastEthernet
0/17
00:18:28: dot1x-registry:dot1x_port_linkcomingup invoked on interface FastEthern
et0/17
00:18:28: dot1x-ev:dot1x_port_enable: set dot1x ask handler on interface FastEth
ernet0/17
00:18:28: dot1x-ev:dot1x_update_port_direction: Updating oper direction for Fa0/
17 (admin=Both, current oper=Both)
00:18:28: dot1x-ev:dot1x_update_port_direction: New oper direction for Fa0/17 is
Both
00:18:28: dot1x_auth Fa0/17: initial state auth_initialize has enter
00:18:28: dot1x-sm:Fa0/17:0000.0000.0000:auth_initialize_enter called
00:18:28: dot1x-ev:auth_initialize_enter:0000.0000.0000: Current ID=0
00:18:28: dot1x_auth Fa0/17: during state auth_initialize, got event 0(cfg_a
uto)
00:18:28: @@@ dot1x_auth Fa0/17: auth_initialize -> auth_disconnected
00:18:28: dot1x-sm:Fa0/17:0000.0000.0000:auth_disconnected_enter_action called
00:18:28: dot1x-sm:
dot1x_update_port_status called with port_status = DOT1X_PORT_STATUS_UNAUTHORIZE
D
00:18:28: dot1x-ev:dot1x_update_port_direction: Updating oper direction for Fa0/
17 (admin=Both, current oper=Both)
00:18:28: dot1x-ev:dot1x_update_port_direction: New oper direction for Fa0/17 is
Both
00:18:28: dot1x-ev:dot1x_port_cleanup_author: cleanup author on interface FastEt
hernet0/17
00:18:28: dot1x-ev:dot1x_update_port_status: Called with host_mode=0 state UNAUT
HORIZED
00:18:28: dot1x-ev:dot1x_update_port_status: using mac 0000.0000.0000 to send po
rt to unauthorized on vlan 0
00:18:28: dot1x-ev:Found a supplicant block for mac 0000.0000.0000 80D71C74
00:18:28: dot1x-ev:dot1x_port_unauthorized: Host-mode=0 radius/guest vlan=0 on F
astEthernet0/17
00:18:28: dot1x-ev: GuestVlan configured=0
00:18:28: dot1x-ev:supplicant 0000.0000.0000 is default
00:18:28: dot1x-ev:supplicant 0000.0000.0000 is last
00:18:28: dot1x-ev:Found a supplicant block for mac 0000.0000.0000 80D71C74
00:18:28: dot1x-ev:0000.0000.0000 is now unauthorized on port FastEthernet0/17
00:18:28: dot1x-ev:dot1x_port_cleanup_author: cleanup author on interface FastEt
hernet0/17
00:18:28: dot1x-ev:Enter function dot1x_aaa_acct_end
00:18:28: dot1x-ev:Found a supplicant block for mac 0000.0000.0000 80D71C74
00:18:28: dot1x-ev:Found a supplicant block for mac 0000.0000.0000 80D71C74
00:18:28: dot1x_auth Fa0/17: idle during state auth_disconnected
00:18:28: @@@ dot1x_auth Fa0/17: auth_disconnected -> auth_connecting
00:18:28: dot1x-sm:Fa0/17:0000.0000.0000:auth_connecting_enter called
00:18:28: dot1x_bend Fa0/17: initial state dot1x_bend_initialize has enter
00:18:28: dot1x-sm:Dot1x Initialize State Entered
00:18:28: dot1x_bend Fa0/17: initial state dot1x_bend_initialize has idle
00:18:28: dot1x_bend Fa0/17: during state dot1x_bend_initialize, got event 1
6383(idle)
00:18:28: @@@ dot1x_bend Fa0/17: dot1x_bend_initialize -> dot1x_bend_idle
00:18:28: dot1x-sm:Dot1x Idle State Entered
00:18:28: dot1x-ev:Created port supplicant block 0000.0000.0000 expected_id=0 cu
rrent_id=0
00:18:28: dot1x-ev:dot1x_init_sb_oper_info:Default port supplicant at memloc 80D
71C74
00:18:28: dot1x-ev:dot1x_post_message_to_auth_sm: cleanup author from interface
FastEthernet0/17
00:18:28: dot1x-ev:
dot1x_post_message_to_auth_sm:0000.0000.0000: Sending TX_FAIL
00:18:28: dot1x-ev:dot1x_post_message_to_auth_sm:0000.0000.0000: Current ID=1
00:18:28: dot1x-ev:Transmitting an EAPOL frame on FastEthernet0/17
00:18:28: dot1x-packet:Tx EAP-Failure, id 0, ver 1, len 4 (Fa0/17)
00:18:28: dot1x-registry:registry:dot1x_ether_macaddr called
00:18:28: dot1x-packet:Tx sa=000f.24e9.72d1, da=0180.c200.0003, et 888E (Fa0/17)
00:18:28: dot1x-ev:dot1x_post_message_to_auth_sm: cleanup author from interface
FastEthernet0/17
00:18:28: dot1x-ev:dot1x_post_message_to_auth_sm: Tx for req_id for supplicant 0
000.0000.0000
00:18:28: dot1x-ev:Transmitting an EAPOL frame on FastEthernet0/17
00:18:28: dot1x-packet:Tx EAP-Request(Id), id 1, ver 1, len 5 (Fa0/17)
00:18:28: dot1x-registry:registry:dot1x_ether_macaddr called
00:18:28: dot1x-packet:Tx sa=000f.24e9.72d1, da=0180.c200.0003, et 888E (Fa0/17)
00:18:28: dot1x-ev:Received an EAPOL frame on interface FastEthernet0/17
00:18:28: dot1x-packet:Rx EAP-Response(Id), id 1, ver 1, len 21 (Fa0/17)
00:18:28: dot1x-packet:Rx sa=0024.1d10.d7c5, da=0180.c200.0003, et 888E (Fa0/17)
00:18:28: dot1x-ev:Couldn't find a supplicant block for mac 0024.1d10.d7c5
00:18:28: dot1x-ev:Couldn't find a supplicant block for mac 0024.1d10.d7c5
00:18:28: dot1x-ev:Found a supplicant block for mac 0000.0000.0000 80D71C74
00:18:28: dot1x_auth Fa0/17: initial state auth_initialize has enter
00:18:28: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_initialize_enter called
00:18:28: dot1x-ev:auth_initialize_enter:0024.1d10.d7c5: Current ID=0
00:18:28: dot1x_auth Fa0/17: during state auth_initialize, got event 0(cfg_a
uto)
00:18:28: @@@ dot1x_auth Fa0/17: auth_initialize -> auth_disconnected
00:18:28: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_disconnected_enter_action called
00:18:28: dot1x-sm:
dot1x_update_port_status called with port_status = DOT1X_PORT_STATUS_UNAUTHORIZE
D
00:18:28: dot1x-ev:dot1x_update_port_direction: Updating oper direction for Fa0/
17 (admin=Both, current oper=Both)
00:18:28: dot1x-ev:dot1x_update_port_direction: New oper direction for Fa0/17 is
Both
00:18:28: dot1x-ev:dot1x_port_cleanup_author: cleanup author on interface FastEt
hernet0/17
00:18:28: dot1x-ev:dot1x_update_port_status: Called with host_mode=0 state UNAUT
HORIZED
00:18:28: dot1x-ev:dot1x_update_port_status: using mac 0024.1d10.d7c5 to send po
rt to unauthorized on vlan 0
00:18:28: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:28: dot1x-ev:dot1x_port_unauthorized: Host-mode=0 radius/guest vlan=0 on F
astEthernet0/17
00:18:28: dot1x-ev: GuestVlan configured=0
00:18:28: dot1x-ev:supplicant 0024.1d10.d7c5 is last
00:18:28: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:28: dot1x-ev:0024.1d10.d7c5 is now unauthorized on port FastEthernet0/17
00:18:28: dot1x-ev:dot1x_port_cleanup_author: cleanup author on interface FastEt
hernet0/17
00:18:28: dot1x-ev:Enter function dot1x_aaa_acct_end
00:18:28: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:28: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:28: dot1x_auth Fa0/17: idle during state auth_disconnected
00:18:28: @@@ dot1x_auth Fa0/17: auth_disconnected -> auth_connecting
00:18:28: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_connecting_enter called
00:18:28: dot1x_bend Fa0/17: initial state dot1x_bend_initialize has enter
00:18:28: dot1x-sm:Dot1x Initialize State Entered
00:18:28: dot1x_bend Fa0/17: initial state dot1x_bend_initialize has idle
00:18:28: dot1x_bend Fa0/17: during state dot1x_bend_initialize, got event 1
6383(idle)
00:18:28: @@@ dot1x_bend Fa0/17: dot1x_bend_initialize -> dot1x_bend_idle
00:18:28: dot1x-sm:Dot1x Idle State Entered
00:18:28: dot1x-ev:Created port supplicant block 0024.1d10.d7c5 expected_id=1 cu
rrent_id=1
00:18:28: dot1x-ev:dot1x_post_message_to_auth_sm: cleanup author from interface
FastEthernet0/17
00:18:28: dot1x-ev:dot1x_post_message_to_auth_sm: cleanup author from interface
FastEthernet0/17
00:18:28: dot1x-ev:dot1x_post_message_to_auth_sm: Tx for req_id for supplicant 0
024.1d10.d7c5
00:18:28: dot1x-ev:Transmitting an EAPOL frame on FastEthernet0/17
00:18:28: dot1x-packet:Tx EAP-Request(Id), id 0, ver 1, len 5 (Fa0/17)
00:18:28: dot1x-registry:registry:dot1x_ether_macaddr called
00:18:28: dot1x-packet:Tx sa=000f.24e9.72d1, da=0180.c200.0003, et 888E (Fa0/17)
00:18:28: dot1x-ev:Received an EAPOL frame on interface FastEthernet0/17
00:18:28: dot1x-packet:Rx EAP-Response(Id), id 0, ver 1, len 21 (Fa0/17)
00:18:28: dot1x-packet:Rx sa=0024.1d10.d7c5, da=0180.c200.0003, et 888E (Fa0/17)
00:18:28: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:28: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:28: dot1x_auth Fa0/17: during state auth_connecting, got event 7(rxRes
pId)
00:18:28: @@@ dot1x_auth Fa0/17: auth_connecting -> auth_authenticating
00:18:28: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_connecting_exit alled
00:18:28: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_authenticating_enter called
00:18:28: dot1x-ev:sending AUTH_START to BEND for supp_info=80D7E584
00:18:28: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_connecting_authenticating_action c
alled
00:18:28: dot1x-ev:Received AuthStart from Authenticator for supp_info=80D7E584
00:18:28: dot1x_bend Fa0/17: during state dot1x_bend_idle, got event 1(auth_
start)
00:18:28: @@@ dot1x_bend Fa0/17: dot1x_bend_idle -> dot1x_bend_response
00:18:28: dot1x-sm:Dot1x Response State Entered for supp_info=80D7E584 hwidb=807
D353C, swidb=807D4898 on intf=Fa0/17
00:18:28: dot1x-ev:Managed Timer in sub-block attached as leaf to master
00:18:28: dot1x-sm:Started the ServerTimeout Timer
00:18:28: dot1x-ev:Going to Send Request to AAA Client on RP for id = 0 and leng
th = 21
00:18:28: dot1x-ev:Got a Request from SP to send it to Radius with id 4294967283
00:18:28: dot1x-ev:Couldn't Find a process thats already handling the request fo
r this id 0
00:18:28: dot1x-ev:Inserted AAA request for interface FastEthernet0/17, MAC 0024
.1d10.d7c5, VLAN 0 on pending request queue
00:18:28: dot1x-ev:Found a free slot at slot 0
00:18:28: dot1x-ev:Found a free slot at slot 0
00:18:28: dot1x-ev:Processing AAA request for interface FastEthernet0/17, MAC 00
24.1d10.d7c5, VLAN 0 from pending request queue
00:18:28: dot1x-ev:Request id = -13 and length = 21
00:18:28: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:28: dot1x-ev:The Interface on which we got this AAA Request is FastEtherne
t0/17
00:18:28: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:28: dot1x-ev:Username is DUZEY\SAYTAMANER
00:18:28: dot1x-ev:MAC Address is 0024.1d10.d7c5
00:18:28: dot1x-ev:RemAddr is 00-24-1D-10-D7-C5/00-0F-24-E9-72-D1
00:18:28: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:30: %LINK-3-UPDOWN: Interface FastEthernet0/17, changed state to up
00:18:46: dot1x-ev:Received an EAPOL frame on interface FastEthernet0/17
00:18:46: dot1x-packet:Rx EAPOL-Start, ver 1, len 0 (Fa0/17)
00:18:46: dot1x-packet:Rx sa=0024.1d10.d7c5, da=0180.c200.0003, et 888E (Fa0/17)
00:18:46: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:46: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:46: dot1x-ev:RECEIVED mac =0024.1d10.d7c5 and Stored MAC =0024.1d10.d7c5
00:18:46: dot1x_auth Fa0/17: during state auth_authenticating, got event 4(e
apStart)
00:18:46: @@@ dot1x_auth Fa0/17: auth_authenticating -> auth_aborting
00:18:46: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_aborting_enter called
00:18:46: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_authenticating_aborting_action cal
led
00:18:46: dot1x-ev:Received DOT1X_MSG_AUTH_ABORT: setting msg_id = 0
00:18:46: dot1x_bend Fa0/17: during state dot1x_bend_response, got event 5(i
nitialize)
00:18:46: @@@ dot1x_bend Fa0/17: dot1x_bend_response -> dot1x_bend_initialize
00:18:46: dot1x-sm:Dot1x Initialize State Entered
00:18:46: dot1x_bend Fa0/17: idle during state dot1x_bend_initialize
00:18:46: @@@ dot1x_bend Fa0/17: dot1x_bend_initialize -> dot1x_bend_idle
00:18:46: dot1x-sm:Dot1x Idle State Entered
00:18:46: dot1x_auth Fa0/17: during state auth_aborting, got event 16(noauth
Abort_noeapLogoff)
00:18:46: @@@ dot1x_auth Fa0/17: auth_aborting -> auth_connecting
00:18:46: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_connecting_enter called
00:18:46: dot1x-ev:dot1x_post_message_to_auth_sm: Tx for req_id for supplicant 0
024.1d10.d7c5
00:18:46: dot1x-ev:Transmitting an EAPOL frame on FastEthernet0/17
00:18:46: dot1x-packet:Tx EAP-Request(Id), id 1, ver 1, len 5 (Fa0/17)
00:18:46: dot1x-registry:registry:dot1x_ether_macaddr called
00:18:46: dot1x-packet:Tx sa=000f.24e9.72d1, da=0180.c200.0003, et 888E (Fa0/17)
00:18:46: dot1x-ev:Received an EAPOL frame on interface FastEthernet0/17
00:18:46: dot1x-packet:Rx EAP-Response(Id), id 1, ver 1, len 21 (Fa0/17)
00:18:46: dot1x-packet:Rx sa=0024.1d10.d7c5, da=0180.c200.0003, et 888E (Fa0/17)
00:18:46: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:46: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:46: dot1x-ev:RECEIVED mac =0024.1d10.d7c5 and Stored MAC =0024.1d10.d7c5
00:18:46: dot1x_auth Fa0/17: during state auth_connecting, got event 7(rxRes
pId)
00:18:46: @@@ dot1x_auth Fa0/17: auth_connecting -> auth_authenticating
00:18:46: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_connecting_exit alled
00:18:46: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_authenticating_enter called
00:18:46: dot1x-ev:sending AUTH_START to BEND for supp_info=80D7E584
00:18:46: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_connecting_authenticating_action c
alled
00:18:46: dot1x-ev:Received AuthStart from Authenticator for supp_info=80D7E584
00:18:46: dot1x_bend Fa0/17: during state dot1x_bend_idle, got event 1(auth_
start)
00:18:46: @@@ dot1x_bend Fa0/17: dot1x_bend_idle -> dot1x_bend_response
00:18:46: dot1x-sm:Dot1x Response State Entered for supp_info=80D7E584 hwidb=807
D353C, swidb=807D4898 on intf=Fa0/17
00:18:46: dot1x-ev:Managed Timer in sub-block attached as leaf to master
00:18:46: dot1x-sm:Started the ServerTimeout Timer
00:18:46: dot1x-ev:Going to Send Request to AAA Client on RP for id = 1 and leng
th = 21
00:18:46: dot1x-ev:Got a Request from SP to send it to Radius with id 4294967284
00:18:46: dot1x-ev:Found a process thats already handling therequest for this id
1
00:18:48: dot1x-err:Dot1x Authentication failed (AAA_AUTHEN_STATUS_ERROR)
00:18:48: dot1x-ev:Received VLAN is No Vlan
00:18:48: dot1x-ev:Enqueued the response to BackEnd
00:18:48: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:48: dot1x-ev:Enter function dot1x_aaa_acct_end
00:18:48: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:48: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:48: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:18:48: dot1x-ev:Received QUEUE EVENT in response to AAA Request
00:18:58: dot1x-sm:Fa0/17:0000.0000.0000:dot1x_process_txWhen_expire called
00:18:58: dot1x_auth Fa0/17: during state auth_connecting, got event 19(txWh
en_expire)
00:18:58: @@@ dot1x_auth Fa0/17: auth_connecting -> auth_connecting
00:18:58: dot1x-sm:Fa0/17:0000.0000.0000:auth_connecting_connecting_action calle
d
00:18:58: dot1x-ev:dot1x_post_message_to_auth_sm: Skipping tx for req_id for def
ault supplicant
00:19:07: dot1x-ev:Received an EAPOL frame on interface FastEthernet0/17
00:19:07: dot1x-packet:Rx EAPOL-Start, ver 1, len 0 (Fa0/17)
00:19:07: dot1x-packet:Rx sa=0024.1d10.d7c5, da=0180.c200.0003, et 888E (Fa0/17)
00:19:07: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:19:07: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:19:07: dot1x-ev:RECEIVED mac =0024.1d10.d7c5 and Stored MAC =0024.1d10.d7c5
00:19:07: dot1x_auth Fa0/17: during state auth_authenticating, got event 4(e
apStart)
00:19:07: @@@ dot1x_auth Fa0/17: auth_authenticating -> auth_aborting
00:19:07: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_aborting_enter called
00:19:07: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_authenticating_aborting_action cal
led
00:19:07: dot1x-ev:Received DOT1X_MSG_AUTH_ABORT: setting msg_id = 0
00:19:07: dot1x_bend Fa0/17: during state dot1x_bend_response, got event 5(i
nitialize)
00:19:07: @@@ dot1x_bend Fa0/17: dot1x_bend_response -> dot1x_bend_initialize
00:19:07: dot1x-sm:Dot1x Initialize State Entered
00:19:07: dot1x_bend Fa0/17: idle during state dot1x_bend_initialize
00:19:07: @@@ dot1x_bend Fa0/17: dot1x_bend_initialize -> dot1x_bend_idle
00:19:07: dot1x-sm:Dot1x Idle State Entered
00:19:07: dot1x_auth Fa0/17: during state auth_aborting, got event 16(noauth
Abort_noeapLogoff)
00:19:07: @@@ dot1x_auth Fa0/17: auth_aborting -> auth_connecting
00:19:07: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_connecting_enter called
00:19:07: dot1x-ev:dot1x_post_message_to_auth_sm: Tx for req_id for supplicant 0
024.1d10.d7c5
00:19:07: dot1x-ev:Transmitting an EAPOL frame on FastEthernet0/17
00:19:07: dot1x-packet:Tx EAP-Request(Id), id 2, ver 1, len 5 (Fa0/17)
00:19:07: dot1x-registry:registry:dot1x_ether_macaddr called
00:19:07: dot1x-packet:Tx sa=000f.24e9.72d1, da=0180.c200.0003, et 888E (Fa0/17)
00:19:07: dot1x-ev:Received an EAPOL frame on interface FastEthernet0/17
00:19:07: dot1x-packet:Rx EAP-Response(Id), id 2, ver 1, len 21 (Fa0/17)
00:19:07: dot1x-packet:Rx sa=0024.1d10.d7c5, da=0180.c200.0003, et 888E (Fa0/17)
00:19:07: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:19:07: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:19:07: dot1x-ev:RECEIVED mac =0024.1d10.d7c5 and Stored MAC =0024.1d10.d7c5
00:19:07: dot1x_auth Fa0/17: during state auth_connecting, got event 7(rxRes
pId)
00:19:07: @@@ dot1x_auth Fa0/17: auth_connecting -> auth_authenticating
00:19:07: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_connecting_exit alled
00:19:07: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_authenticating_enter called
00:19:07: dot1x-ev:sending AUTH_START to BEND for supp_info=80D7E584
00:19:07: dot1x-sm:Fa0/17:0024.1d10.d7c5:auth_connecting_authenticating_action c
alled
00:19:07: dot1x-ev:Received AuthStart from Authenticator for supp_info=80D7E584
00:19:07: dot1x_bend Fa0/17: during state dot1x_bend_idle, got event 1(auth_
start)
00:19:07: @@@ dot1x_bend Fa0/17: dot1x_bend_idle -> dot1x_bend_response
00:19:07: dot1x-sm:Dot1x Response State Entered for supp_info=80D7E584 hwidb=807
D353C, swidb=807D4898 on intf=Fa0/17
00:19:07: dot1x-ev:Managed Timer in sub-block attached as leaf to master
00:19:07: dot1x-sm:Started the ServerTimeout Timer
00:19:07: dot1x-ev:Going to Send Request to AAA Client on RP for id = 2 and leng
th = 21
00:19:07: dot1x-ev:Got a Request from SP to send it to Radius with id 4294967285
00:19:07: dot1x-ev:Couldn't Find a process thats already handling the request fo
r this id 2
00:19:07: dot1x-ev:Inserted AAA request for interface FastEthernet0/17, MAC 0024
.1d10.d7c5, VLAN 0 on pending request queue
00:19:07: dot1x-ev:Found a free slot at slot 0
00:19:07: dot1x-ev:Found a free slot at slot 0
00:19:07: dot1x-ev:Processing AAA request for interface FastEthernet0/17, MAC 00
24.1d10.d7c5, VLAN 0 from pending request queue
00:19:07: dot1x-ev:Request id = -11 and length = 21
00:19:07: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:19:07: dot1x-ev:The Interface on which we got this AAA Request is FastEtherne
t0/17
00:19:07: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:19:07: dot1x-ev:Username is DUZEY\SAYTAMANER
00:19:07: dot1x-ev:MAC Address is 0024.1d10.d7c5
00:19:07: dot1x-ev:RemAddr is 00-24-1D-10-D7-C5/00-0F-24-E9-72-D1
00:19:07: dot1x-ev:Found a supplicant block for mac 0024.1d10.d7c5 80D7E584
00:19:19: dot1x-registry:dot1x_port_linkchange invoked on interface FastEthernet
0/17
00:19:19: dot1x-ev:supp_info=80D7E584 txWhen_timer=80D7E5D4 quietWhile_timer=80D
7E594reAuthWhen_timer=80D7E5B4 awhile_timer=80D7E5F4
00:19:19: dot1x-ev:destroy supplicant block for 0024.1d10.d7c5
00:19:19: dot1x-ev:supp_info=80D71C74 txWhen_timer=80D71CC4 quietWhile_timer=80D
71C84reAuthWhen_timer=80D71CA4 awhile_timer=80D71CE4
00:19:19: dot1x-ev:destroy supplicant block for 0000.0000.0000
00:19:19: dot1x-ev:Enter function dot1x_aaa_acct_end
00:19:19: dot1x-ev:Found a supplicant block for mac 0000.0000.0000 80D71C74
00:19:19: dot1x-ev:Found a supplicant block for mac 0000.0000.0000 80D71C74
00:19:19: dot1x-ev:dot1x_port_cleanup_author: cleanup author on interface FastEt
hernet0/17
00:19:19: dot1x-ev:dot1x_post_message_to_auth_sm: cleanup author from interface
This is driving me crazy, working on it for a whole week and no results..
Thank you..

Hi again,
I have put the config on 2960. Now as soon as the authentication starts, this is the message on debug;
dot1x authentication unable to start - authenticator not enabled..
Any ideas?
regards,
onur

How i can calculate the backplane speed & throughput of cisco 48 1G 2960S switch?

How i can calculate the backplane speed & throughput of cisco 48 1G 2960S switch?

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Calculate? Calculate for wirespeed/line-rate? If the latter, take all the port bandwidths, and assuming they are duplex, double for necessary fabric bandwidth. I.e. 48 gig ports would need a 96 Gbps fabric. Take all your port bandwidths, and allow 1.448 Mpps per gig (for minimum size Ethernet packets), i.e. 48 gig ports would need 69.5 Mpps. Once you have required fabric bandwidth and PPS, you can compare to vendor's specs.

Ask the Expert: Different Flavors and Design with vPC on Cisco Nexus 5000 Series Switches

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco® NX-OS.
The biggest limitation to a classic port channel communication is that the port channel operates only between two devices. To overcome this limitation, Cisco NX-OS has a technology called virtual port channel (vPC). A pair of switches acting as a vPC peer endpoint looks like a single logical entity to port channel attached devices. The two devices that act as the logical port channel endpoint are actually two separate devices. This setup has the benefits of hardware redundancy combined with the benefits offered by a port channel, for example, loop management.
vPC technology is the main factor for success of Cisco Nexus® data center switches such as the Cisco Nexus 5000 Series, Nexus 7000 Series, and Nexus 2000 Series Switches.
This event is focused on discussing all possible types of vPC along-with best practices, failure scenarios, Cisco Technical Assistance Center (TAC) recommendations and troubleshooting
Vishal Mehta is a customer support engineer for the Cisco Data Center Server Virtualization Technical Assistance Center (TAC) team based in San Jose, California. He has been working in TAC for the past 3 years with a primary focus on data center technologies, such as the Cisco Nexus 5000 Series Switches, Cisco Unified Computing System™ (Cisco UCS®), Cisco Nexus 1000V Switch, and virtualization. He presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE® certification (number 37139) in routing and switching, and service provider.
Nimit Pathak is a customer support engineer for the Cisco Data Center Server Virtualization TAC team based in San Jose, California, with primary focus on data center technologies, such as Cisco UCS, the Cisco Nexus 1000v Switch, and virtualization. Nimit holds a master's degree in electrical engineering from Bridgeport University, has CCNA® and CCNP® Nimit is also working on a Cisco data center CCIE® certification While also pursuing an MBA degree from Santa Clara University.
Remember to use the rating system to let Vishal and Nimit know if you have received an adequate response.
Because of the volume expected during this event, Vishal and Nimit might not be able to answer every question. Remember that you can continue the conversation in the Network Infrastructure Community, under the subcommunity LAN, Switching & Routing, shortly after the event. This event lasts through August 29, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hello Gustavo
Please see my responses to your questions:
Yes almost all routing protocols use Multicast to establish adjacencies. We are dealing with two different type of traffic –Control Plane and Data Plane.
Control Plane: To establish Routing adjacency, the first packet (hello) is punted to CPU. So in the case of triangle routed VPC topology as specified on the Operations Guide Link, multicast for routing adjacencies will work. The hellos packets will be exchanged across all 3 routers and adjacency will be formed over VPC links
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/operations/n5k_L3_w_vpc_5500platform.html#wp999181
Now for Data Plane we have two types of traffic – Unicast and Multicast.
The Unicast traffic will not have any forwarding issues, but because the Layer 3 ECMP and port channel run independent hash calculations there is a possibility that when the Layer 3 ECMP chooses N5k-1 as the Layer 3 next hop for a destination address while the port channel hashing chooses the physical link toward N5k-2. In this scenario,N5k-2 receives packets from R with the N5k-1 MAC as the destination MAC.
Sending traffic over the peer-link to the correct gateway is acceptable for data forwarding, but it is suboptimal because it makes traffic cross the peer link when the traffic could be routed directly.
For that topology, Multicast Traffic might have complete traffic loss due to the fact that when a PIM router is connected to Cisco Nexus 5500 Platform switches in a vPC topology, the PIM join messages are received only by one switch. The multicast data might be received by the other switch.
The Loop avoidance works little different across Nexus 5000 and Nexus 7000.
Similarity: For both products, loop avoidance is possible due to VSL bit
The VSL bit is set in the DBUS header internal to the Nexus.
It is not something that is set in the ethernet packet that can be identified. The VSL bit is set on the port asic for the port used for the vPC peer link, so if you have Nexus A and Nexus B configured for vPC and a packet leaves Nexus A towards Nexus B, Nexus B will set the VSL bit on the ingress port ASIC. This is not something that would traverse the peer link.
This mechanism is used for loop prevention within the chassis.
The idea being that if the port came in the peer link from the vPC peer, the system makes the assumption that the vPC peer would have forwarded this packet out the vPC-enabled port-channels towards the end device, so the egress vpc interface's port-asic will filter the packet on egress.
Differences: In Nexus 5000 when it has to do L3-to-L2 lookup for forwarding traffic, the VSL bit is cleared and so the traffic is not dropped as compared to Nexus 7000 and Nexus 3000.
It still does loop prevention but the L3-to-L2 lookup is different in Nexus 5000 and Nexus 7000.
For more details please see below presentation:
https://supportforums.cisco.com/sites/default/files/session_14-_nexus.pdf
DCI Scenario: If 2 pairs are of Nexus 5000 then separation of L3/L2 links is not needed.
But in most scenarios I have seen pair of Nexus 5000 with pair of Nexus 7000 over DCI or 2 pairs of Nexus 7000 over DCI. If Nexus 7000 are used then L3 and L2 links are required for sure as mentioned on above presentation link.
Let us know if you have further questions.
Thanks,
Vishal

BOBJ 3.1 DI Install Issues

I had no trouble at all on the core BOBJ EDGE 3.1 (Step 1) using the Express Install (MySQL DB all local). When it came to Step 2 - Install Data Integrator I had numerous issues.
1) The install doc for this portion was not in the base package that I could find. After much digging, I finally got a copy (thanks to the Wiki).
2) Even though it says I can use the existing MySQL and Tomcat Server - it wanted the path to the TOMCAT install. I could not seem to find this referenced anywhere and after reading the Core docs, it seems WACS may be the web server installed.
3) After several attempts, I finally found that SQLServer 2008 is not supported for the DI portion, only for the BOBJ DB (nice). This is of course after I finally realized that I had the correct server name and port (why does it need this when I already have the DB server items supplied and can connect??)
Has anyone else experienced these issues and can someone point me to the default install directory for the TOMCAT server if it was used for the core BOBJ web services? I ended up just installing what I believe to be a second instance of TOMCAT 5.5 on the same server since I am only deploying a DEV BOBJ server for learning & development.
Any insight is greatly appreciated. Thanks

Hi,
if you do the default install od EDGE the WACS will be installed. Re- install EDGE using the custome mode to choose the Tomcat as WACS.
Regards
-Seb.

Cisco Network Setup Assistant Unable to install the certificate on Android KitKat

Greetings,
I'm having issues with deploying the CA. Although the Cisco app fails, the user cert (but no CA) appears to install and is accessible during wifi setup. I am running the latest version of Cisco Network Setup Assistant 1.2.42. The phone is running Android KitKat 4.4.4, not rooted, running stock T-Mobile rom. I'm able to authenticate with the guest side, and get as far as Installing Certificates... Reference the screen shots attached.
Error message cisco Network Setup Assistant: "Unable to install the certificate. Exit the application and run it again to continue to the installation."
I have ran the application several times, it keeps returning to this same message.
After failure of the Cisco app, I noticed there is a certificate manager with CA cert and key, and than subsequently one new key continues to loop after until I cancel (also in screenshots).
I have tried decryption, removing all security, and clearing credentials, yet the problem persists. Any help is appreciated.

Greetings,
I'm having issues with deploying the CA. Although the Cisco app fails, the user cert (but no CA) appears to install and is accessible during wifi setup. I am running the latest version of Cisco Network Setup Assistant 1.2.42. The phone is running Android KitKat 4.4.4, not rooted, running stock T-Mobile rom. I'm able to authenticate with the guest side, and get as far as Installing Certificates... Reference the screen shots attached.
Error message cisco Network Setup Assistant: "Unable to install the certificate. Exit the application and run it again to continue to the installation."
I have ran the application several times, it keeps returning to this same message.
After failure of the Cisco app, I noticed there is a certificate manager with CA cert and key, and than subsequently one new key continues to loop after until I cancel (also in screenshots).
I have tried decryption, removing all security, and clearing credentials, yet the problem persists. Any help is appreciated.

Did 10.5.2 break Adobe's Flash Player express install?

I hit a Flash site, it requested I update my Flash Player using the express install. I did this, it downloaded a package, which opened an installer asking me to close the browser. The browser was frozen (tried both Safari & Firefox), so I have to force-quit.
Is this the same for anyone else on 10.5.2?

OS Lucinity wrote:
I hit a Flash site, it requested I update my Flash Player using the express install. I did this, it downloaded a package, which opened an installer asking me to close the browser.
The Adobe Flash Player seems to be having issues with 10.5.x in general. Some people have to use the latest update, some people had to revert to an older version. The Adobe installer doesn't seem to always work correctly from Standard accounts. The Adobe Uninstaller certainly does not work correctly from Standard accounts.
Try logging in to an Admin account, then download the Uninstaller and the the Flash installer from the Adobe site. Uninstall Flash using the Uninstaller. Then install it again from the download. Might work.
However I have to say that web surfing with an iPod Touch (which lacks Flash) gets rid of an awesome number of annoying advertisements, so I uninstalled Flash on my iMac.

Cisco 2950 - 24 WS switch express install issue

Similar Messages

Maybe you are looking for