Cisco 340 (Edge) DMP can support ELO 3209L Touch Screen

Hi Cisco Expert,
Could you help to check ELO 3209L Touch Screen, i'd like to use this screen in our Digital Signs Systems (AppSpace 5. and 340 DMP), but i'm not sure about 340 DMP which can support 3209L or not, some screen model from cisco website.
ELO Interactive Digital Signage Display
including 4201L, 5501L, and 7001L.
ELO Desktop Touchmonitor including 1715L,
1515L, 1519L, 1919L, 2201L, 1940L, 2243L,
2244L, and 3201L.
ET4201L-CUWA-0-MT-GY-G, SY-4210H
Anytouch WTM320T
Dell ST2220Tc
NEC V463-TM,V423-TM
Thanks&Rgds.

Similar Messages

HT4623 Can an ipod 4g touch screen, have the ios 7 software?

Can an ipod 4g touch screen, have the ios 7 software?

As Apple said in June, iOS 7 is not compatible with the 4G iPod.
All the iOS devices compatible (iPhone 4 and later, iPad 2 and later, and 5G iPod touch) with iOS 7 have at least 512 MB of memory (RAM). The 4G iPod only has 256 MB

DMP 340 with ELO 1919L Touch screen

Hi
We bought an ELO Touchscreen 1919L to integrate with the DMP 340, but i have 0 experience with Linux so i can't install the drivers on the DMP 340, anyone have some instructions apart of the ELO Website? i'm kind of lost.
I connected the DMP to the Touch screen with the USB cable, Linux has recognized immediatly without drivers, but only works the click, i can't move the cursor with my finger.
Regards.

There is a new Mac driver for Lion available here: http://touch-base.com/downloads/Production/ELO/macosx/Intel/macx.tgz
This driver supports Mac OSX 10.2 through 10.7. It supports multiple monitors and even supports dual-touch on the IntelliTouch Plus products. It supports all Elo technologies except for APR and Projective Capacitive.
Make certain to uninstall all previous versions of the touch driver before installing this driver. If there are any Touch-Base or UPDD icons or shortcuts on the desktop, make sure you remove them before downloading this driver.The downloaded file on your desktop must be named "setup". If it is named "setup1 or setup2 etc.. it will not function correctly. This is explained on the Touch-Base website referred to below:
For help on installing/uninstalling the driver, see this link: http://www.touch-base.com/documentation/MacOSXPlatformNotes.htm

Directory structure support and sluggish touch screen

I bought a Zen X Fi2. My expectations were high since I already had a creative some years ago. (I was quite pleased with the performance and sound quality etc)
However I am a bit dissapointed with Zen XFi2- The touch screen is not very successful. The scroll function does not work at a satisfactory level and sometimes (when I want to scroll), it makes a "selection" rather than "scrolling".
Also it does not support browsing with directory structure. For those people (like me) who are quite used to drag and drop type of copying for mp3 files, it is really a pain to re arrange all the songs for ID3 tag information.
I believe these two issues are software issues and can be improved by new firmware upgrade.
I also want to take this opportunity to tell that the software (interface software) that comes with the device is totally crap- I have never seen a software that tries to control the user rather than the user controlling the software. An ideal interface software for such a device should be the one which allows user to choose the songs from any directory, drag and drop into the device.
I was going to return my Zen however after playing around for a few days, I somewhat get used to its sluggish touch screen behaviour and accepted ID3 tag browsing (which still gives me a lot of problem) so right now I am gonna keep it.
May be software developpers can work on touch screen improvement, adding the support for directory structure browsing (as well as ID3 tag browser) and work on interface software a bit more ?
Thanks
Best Regards

This is indeed interesting because when you say "I don't have the problems you mentioned" I believe you also refer to the sensitivity of the touch screen. This makes me ask the question if my item has some problems. Since I do not have any means of cross checking this (apparently there is no other Zen XFi2 around me) may be I should ask you this question: "When you want to browse among albums for example, you wipe your finger across the screen so the screen rolls down; can you have it fluently like in an IPOD touch?- or does it not recognize immediately and you have to do it again sometimes?"
As for the volume button- I do indeed agree. For devices like this one; having physical buttons for at least volume, mute, stop/pause is a "must"! Choosing, browsing or starting a song is not a big deal however muting, stopping or changing the volume may be needed instantly from time to time. It is very unpractical to browse for volume, find it and adjust it!
Also may I add that for such a nice device, there should be a remote control on the headphone/earphone cable and should employ at least stop/play/mute/volume/forward/reverse buttons. I mean think about it for a while- why would you want to take use this device- apparently not to watch movies at home! You take it with you and listen to music, while cycling, jogging, skiing, roller blading etc. It is so difficult taking out the device from your pocket, browsing for volume button and turning up and down the volume (while cycling for example!) or skipping to next song with one touch!
Cheers

Support code 1600, touch screen not working

The 1600 support code popped up to tell me that two of my ink cartridges are low, but it won't let me do anything else. The touch screen seems to have stopped working. Also, is there any way I can change settings so that certain documents are printed in black and white only?

Hello.
The 1600 error indicates that one or more of the ink tanks are empty.
Please replace the empty ink tank in order to resume operation.
Unfortunately, the empty color tank would have to be replaced even though you will be printing a black and white document.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I can't use my touch screen because type has gotten too big

I cannot use my phone because the type has gotten so big that nothing works. I can't reboot it because I am unable to use the slide to turn off. How can I turn it off without using touch screen?

To turn off your iPhone without the touch screen, hold the Power & Home Button for 10 seconds or until the screen goes black. Then just turn on your phone just like any other boot and it should start up as normal! ( http://support.apple.com/kb/ht1430 ) This will not remove data, the purpose of this is if your phone is unresponsive or yu just cannot turn it off normaly.
Is everything really zoomed in like this?
If that is the case, go to setting > General > Accessibility > Zoom
Go ahead and switch that off

Where can I buy a touch screen digitizer for hp?

Hi
I have hp laptop with following properties:
Natural Silver 15.6" ENVY TouchSmart 15-j023cl Laptop PC with
AMD Elite Quad-Core A10-5750M Accelerated Processor, 8GB Memory,
Touchscren, 1TB Hard Drive and Windows 8.
Recently, my touch screen digitizer has broken and I had such a hard time to work with my laptop. I want to replace my broken digitizer by the new one, but unfortunately I couldn't find any web site providing me a link to buy a digitizer, although I searched a lot.
So, I just wanted to know if there is anyone here knows how to buy a digitizer for Natural Silver 15.6" ENVY TouchSmart 15-j023cl Laptop?
Thanks

Hi,
You can buy from the following Part store:
http://partsurfer.hp.com/Search.aspx?SearchText=E0M24UA
Or using part number (Display, item #1) and buy elsewhere.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I use a touch screen monitor with my macbook pro?

I am doing a lot of photo organization and thought it would be easier if I had a touch screen monitor attached to my macbook pro. Has anyone tried this and if so, what brand did you use.
Thanks
Bob

All a touchscreen is going to do is replace your mouse or trackpad, you can't use two hands at once to gain any speed advantage organizing photo's.
Also it would have to be a pretty big touch screen, place your two hands over a 17" screen and most of the screen is blocked.
If you need something like that, talk to Microsoft, they have a "Big @ss table" that does that.
Gives me a backache just looking at those people
http://www.engadget.com/2007/06/20/microsoft-surface-one-day-your-computer-will- be-a-big-***-table/

Can i design a touch screen using just labview, i mean creating a vi and running it???

i juust want to design a touch screen using ñlabview, canbe a calculator program whit labview

I guess it would depend on the type of touch screen and computer that you are using. I don't have a whole lot of experience with touch screens, but isn't touching a touch screen equivalent to clicking a mouse button with a normal screen??
If this is the case, then if the operating system on that computer is supported by LabVIEW then it should definitely work. All you would need to do is build the LabVIEW program like normal, and put it on the touch screen computer.

I can't use The touch screen on my photosmart D7360.

The touch screen on my photosmart D7360 is not working properly. I am using windows vista 32-bit. It is stuck on the screen that comes up on the printer with a message to replace ink cartridge soon. at the bottom press OK or cancel. I can not do either. when I insert a memory card the screen does not change either so unable to print pics directly from the printer it will work from the computer so it works fine that way. what should I do or what needs to be fixed? I have already re-installed drivers several times and that does not work.

Hi there Rslilangel
You can run HP Print and Scan Doctor this tool Diagnoses and resolves many printing, scanning, and connectivity problems.
Also The HP Hardware Diagnostic Utility This one Helps resolve common hardware-related issues.
You can find this useful utilities here Click here
Whe you run this let me the out come I will do my best to help you.
Hope this helps!
RobertoR
remember ↓↓↓
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

TS3992 How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but touch screen doesn't work to unlock the phone or select any

How can I back up an iphone when I haven't set the phone up for back ups & the touch screen doesn't work? The phone can receive calls (not answer) & the pictures & messages can be seen but the touch screen doesn't work to unlock the phone or select anything. We want to save/transfer pictures, contacts, and music to the replacement phone.

Try backing it up to your computer with iTunes. Connect it to your computer, open iTunes, click on the name of the phone in iTunes, go to the Summary tab of your iTunes sync settings and click Back Up Now. Also go to File>Devices>Transfer Purchases to transfer you apps and other purchased media to your iTunes library.

I can not get the touch screen to work

How do I get he touch screen to work?

You can try resetting the device by holding down the sleep and home key, past when you see the power down slider and until you see the silver apple. Let it reboot and see if that helps.
If not you can try a complete restore with iTunes....or it's time to head to the apple store and have them look at it.

How can I order LCD Touch Screen for my G900 in US?

Hi, I live in Los Angeles and need to order Touch Screen LCD for my G900. I don't want to order from Asia, as the sources are unknown. Can anybody help me find it in US? Thanks

Hi,
Our website for customers in the US is www.sonystyle.com. I was able to search the web and found five stores that may be near you, please take a look at the following link:
http://www.sonystyle.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10551&storeId=10151&lan...

Can I convert to touch screen

Bought hp 2000 2c25dx. Can I change out screen to touch screens. Windows 8 making me nuts without it.

Touchscreen51, welcome to the forum.
This is a peer to peer forum. Most of us are not HP employees. It would be better if you contacted HP Customer Service for an answer to your question.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Where can I buy iPod Touch Screen

Hullo!
I have an iPod Touch 8GB 2nd Generation.
Where can I buy a replacement screen? (Since I have a cracked screen and wish to replace it).
I saw a video of someone reparing one saying he got one for $50. Does Apple sell them? I hear you can get them to be done for you, but that would mean more $$$.
Cheers,
Cam

Cheers.
Found a front panel for it...just need the glass...unless it does have glass i just cant see it....
i should be able to go from there. cheer man.

Cisco 340 (Edge) DMP can support ELO 3209L Touch Screen

Similar Messages

Maybe you are looking for