CISCO 350 Wireless LAN Module on Solaris

I am running Solaris 8 (6/00) for Intel platform with xFree86 version 4.0.3 on my laptop. My CISCO 350 PCMCIA Wireless LAN module work cannot be used nor detected in Solaris. Can anyone help me with that?

Are you running any other Vm's on the host server?
Are they working? Did you enable your BIOS to support VM?
Then with regards to the install make sure you follow the guide as it can get tricky.
I forgot to add Promiscuous personally. Make double check you Network Backing. I am not running a VM anymore - just recalling where I had issues.
http://www.cisco.com/c/en/us/support/docs/wireless/virtual-wireless-controller/113677-virtual-wlan-dg-00.html

Similar Messages

  • Software downloads for Aironet 350 Wireless LAN Adapter

    Where can I get the software to install the Aironet 350 Wireless LAN Adapter? Will it have a client manager? I think that's what the software is to switch settings as you change locations.Model: AIR-PCM352

    Hi,
    You can download the software from the below link using your CCO login:-
    http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875243
    Cisco Aironet Wireless LAN Client Adapters
    Cisco Aironet 340 Wireless PC Card Adapter
    Cisco Aironet 340 Wireless PCI/LMC Adapter
    Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter
    Cisco Aironet 350 Wireless LAN Client Adapter
    Cisco Aironet 5 GHz 54 Mbps Wireless LAN Client Adapter (CB20A)
    Cisco Aironet 802.11a/b/g CardBus Wireless LAN Client Adapter (CB21AG)
    Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter (PI21AG)
    Plz rate if this help.
    Regards
    Inayath Shariff

  • How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

    I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC  and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
    Best Regards,
    Alan

    Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings.  The WLC2106 is a traditional Cisco product.  You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
    Best Regards,
    Glenn

  • CWWLSE-1030-K9 Cisco WLSE Wireless LAN Solution EE 2.13 with AP 1242

    Dear all, my customer has CWWLSE-1030-K9 Cisco WLSE Wireless LAN Solution EE 2.13 with 12 AP1242 (a/b/g) Radio 802.11g in place. Now he will buy additional AP what type of AP can i use because AP 12xx is EOS.

    Hello Dirk,
    AP 1200 is EOS, and customers were encouraged to migrate to 1240 Series (which is also EOS now)
    http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1200-series/eol_c51-506611.html
    Therefore it is recommended to migrate to Cisco Aironet 1600 or Cisco Aironet 2600 Series.
    http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/unified-ip-phone-7900-series/end_of_life_notice_c51-726425.html

  • Software Version Upgrade for Cisco 4402 Wireless Lan Controller

    Hi,
    We have Cisco 4402 Wireless Lan Controller with Software Version 3.2.171.6 and we want to upgrade it to latest version.
    So can anyone please let me know the latest version to upgrade the WLC?
    Also since WLC is running on very lower version is it possible to upgrade to the latest version directly or we have to move it step by step to upgrade this to latest version?
    Thanks

    Take a look at the compatibility matrix below:
    http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
    7.0.235 is the latest that you can go to:
    http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_235_0.html
    The release notes outline the upgrade process.
    "Upgrade to 4.0.206.0 or later 4.0 release, then upgrade to 4.2.176.0, before upgrading to 7.0.235.0."

  • AIR-CAP3501I access point not joining the Cisco 2100 Wireless Lan controller.

    Hello All,
    I am installing a new LAP (AIR-CAP3501I ) through the wireless lan controller (AIR-WLC2112-K9) with software version 7.0. I have an external ADSL modem which will act as the DHCP server for the wireless clients and the LAP.
    Please find my network setup as below:
    The ISP ADSL modem , WLC and LAP are connected to a unmanaged POE switch. The LAP gets its power through the POE switch. When i connect the LAP and the WLC to the switch along with the ADSL modem, the LAPs are getting the ip address from the ADSL modem, however they are not joining the WLC for further process.
    ADSL Modem ip address: 192.168.1.254
    Management ip address on the LAP: 192.168.1.1 ( Assigned to port 1, untagged Vlan).
    Ap Manager ip address: 192.168.1.1 ( Assigned to the same port i.e port1, Untagged Vlan).
    The LAP is getting an IP address from the ADSL modem in the range of the DHCP scope.
    I will paste the logs very soon.
    Please let me know if i am doing anything wrong oe what will be the issue.
    Thanks in advance,
    Mohammed Ameen

    Hello All,
    Please find the logs for  "debug capwap event" from the WLC below:
    *spamReceiveTask: Sep 26 19:44:59.196: e8:04:62:0a:3f:10 Join Version: = 117465600
    *spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 Join resp: CAPWAP Maximum Msg element len = 92
    *spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 Join Response sent to 192.168.1.156:45510
    *spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 CAPWAP State: Join
    *spamReceiveTask: Sep 26 19:44:59.197: e8:04:62:0a:3f:10 capwap_ac_platform.c:1216 - Operation State 0 ===> 4
    *apfReceiveTask: Sep 26 19:44:59.198: e8:04:62:0a:3f:10 Register LWAPP event for AP e8:04:62:0a:3f:10 slot 0
    *spamReceiveTask: Sep 26 19:44:59.341: e8:04:62:0a:d1:20 DTLS connection not found, creating new connection for 192:168:1:158 (45644) 192:168:1:2 (5246)
    *spamReceiveTask: Sep 26 19:45:00.119: e8:04:62:0a:d1:20 DTLS Session established server (192.168.1.2:5246), client (192.168.1.158:45644)
    *spamReceiveTask: Sep 26 19:45:00.119: e8:04:62:0a:d1:20 Starting wait join timer for AP: 192.168.1.158:45644
    *spamReceiveTask: Sep 26 19:45:00.121: e8:04:62:0a:d1:20 Join Request from 192.168.1.158:45644
    *spamReceiveTask: Sep 26 19:45:00.123: e8:04:62:0a:d1:20 Join Version: = 117465600
    *spamReceiveTask: Sep 26 19:45:00.123: e8:04:62:0a:d1:20 Join resp: CAPWAP Maximum Msg element len = 92
    *spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 Join Response sent to 192.168.1.158:45644
    *spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 CAPWAP State: Join
    *spamReceiveTask: Sep 26 19:45:00.124: e8:04:62:0a:d1:20 capwap_ac_platform.c:1216 - Operation State 0 ===> 4
    *apfReceiveTask: Sep 26 19:45:00.125: e8:04:62:0a:d1:20 Register LWAPP event for AP e8:04:62:0a:d1:20 slot 0
    *spamReceiveTask: Sep 26 19:45:00.273: e8:04:62:0a:d1:20 Configuration Status from 192.168.1.158:45644
    *spamReceiveTask: Sep 26 19:45:00.273: e8:04:62:0a:d1:20 CAPWAP State: Configure
    *spamReceiveTask: Sep 26 19:45:00.273: Invalid channel 1 spacified for the AP APf866.f2ab.24b6, slotId = 0
    *spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Updating IP info for AP e8:04:62:0a:d1:20 -- static 0, 192.168.1.158/255.255.255.0, gtw 192.168.1.254
    *spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Updating IP 192.168.1.158 ===> 192.168.1.158 for AP e8:04:62:0a:d1:20
    *spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Setting MTU to 1485
    *spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Finding DTLS connection to delete for AP (192:168:1:158/45644)
    *spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 Disconnecting DTLS Capwap-Ctrl session 0xa06d6a4 for AP (192:168:1:158/45644)
    *spamReceiveTask: Sep 26 19:45:00.274: e8:04:62:0a:d1:20 CAPWAP State: Dtls tear down
    *spamReceiveTask: Sep 26 19:45:00.277: spamProcessGlobalPathMtuUpdate: Changing Global LRAD MTU to 576
    *spamReceiveTask: Sep 26 19:45:00.277: e8:04:62:0a:d1:20 DTLS connection closed event receivedserver (192:168:1:2/5246) client 192:168:1:158/45644).
    The Acess point joins the Controller for 2-3 seconds and then unjoins again. I am not sure what i am doing wrong here. The access points are getting the IPs from the ADSL modem through the switch, then it talks to the WLC, however it does not join the controller for further process.
    Note:
    The Managemnet interface and the AP manager interface are assigned to the same port 1 with unassigned Vlan as mention above.

  • User names from Wireless LAN Controller

    Hi all
    I'm trying to get a report out of a Cisco 4402 Wireless LAN controller, showing all the current clients on a particular WLAN profile, with their user name.
    The Monitor -> Clients screen shows me all the MAC addreses, and I can filter by WLAN Profile Name to home in on the clients I'm interested in.  When I click on a MAC address for more detail, I can see the correctly populated User Name on the Client Properties screen - so the WLC definitely knows all the detail I need...
    Ideally I want spreadheet with a list of usernames of currently connected users (or even better, users that have connected over a time period).  I can't see any way to export this data without doing it manually (and I have 270ish clients at any one time).
    I've tried at the command line, with a "show clients summary", which at least gives me a table I can copy and paste into a spreadsheet, but again the username detail is only displayed with a "show clients detail MACADDRESS" - and the MACADDRESS field won't take a wildcard.
    I've also tried examining the log files, and setting up SysLog to a syslog server - but I haven't observed user names in any of the logs I've seen.
    The WLC is on version 4.2.176.0 - and doing an upgrade isn't very convenient at present - although I might consider taking the pain if a later release provides the funcationaility I need.
    Does anyone have any ideas on this one?
    Thanks!

    Dear Scott,
           I have some points to get clarified for step by step approach that has to be carried out during our downtime, or which is best option for this migration.
    Is that the WLC running different code will be able to join Mobility Group.  i.e. irrespective of Model and Code ?
    1. Do i have to create a mobility group and include the existing WLC and new 3 numbers of WLC , thus when i remove the Existing WLC from the Group the Ap will try to get assosiated with other WLC in the group.
    2. In WCS changing the Access point template configuring primary, secondary , tertiary Wireless LAN controller with New wireless LAN controller, during the down time this activity will be performed.
    Which method or way to proceed during the downtime. Looking for your expert view.
    Thanks .... Arun

  • Cisco 350 WB security

    I need info on the security issues and solutions for a building to building wireless wan using Cisco 350 Wireless Bridges. Everything I'm finding on the subject is for WLAN applications.

    Access points and bridges use the same radio technology, so security concerns as far as physical location are similar.

  • Cisco 4402 Guest lan and product lan DHCP assignment

    I'm currently setting up a wirless lan with a Cisco 4402 Wireless Lan Controller and 1 cisco 1242AG Access points.
    All the devices include:
    Cisco catalyst 6505
    Cisco 4402
    D-Link broadband router
    Connection between them:
    6505 trunking with 4402 (dot1q and trunk vlan 1 and vlan 3, but i found that all vlan on the 6506 will trunk together), wlan 1 is production lan while vlan 3 is Guest lan)
    6505 vlan 3 is connecting to D-Link broadband router as a guest lan
    both vlan 1 and vlan 3 have DHCP server for production PC and guest notebook respectively.
    On 4402, i have two interfaces and 2 WLAN. one interface for production lan pointing DHCP server to product DHCP address and the other interface for guest lan, which pointing to guest lan DHCP server.
    when a notebook connec to guest lan, it will assign an address from guest DHCP server, while connecting to production lan, a production IP will be assigned last week. But the things change w/o changing the structure, when i connect to guest lan SSID, the ip suppose assign by the Guest lan DHCP, but it failed, the notebook got ip address from production lan.
    Is it trunking makes those all Vlan "mixed", and get ip from the DHCP server with faster respone time?
    How can i make sure when i connect to guest lan, the ip will be assigned from Guest Lan DHCP server and vice versa?
    Many thanks!

    Here is the URL for the Cisco Guest Access Using the Cisco Wireless LAN Controller which will help you :
    http://www.cisco.com/en/US/docs/wireless/technology/guest_access/technical/reference/4.0/GAccess.html

  • Warning page on Cisco Wireless Lan Controller for guest access

    Hi,
    We have an Cisco wireless LAN controller 4400 in our organization, and lots of guest using our Wi-Fi network.
    I would like to configure a warning and terms and condition page when guest using first time our network.
    Can you please let me know is that possible without adding external web server and how to configure.
    Many Thanks in Advance
    Amit Sharma

    Hi Amit,
    Hope you are doing great!!
    the below link will help you in getting the issue resolved!!
    http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00809bdb5f.shtml
    Please dont forget to rate the usefull posts!!
    Regards
    Surendra

  • What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier

    What are the following:1)Cisco 1600 Series IOS WIRELESS LAN RECOVERY. 2)Service Provider Option 60 for Vendor Class Idenfier
    These items are listed with 1600 series AP but I'm unable to understand what are these things & the use of them

    DHCP Option 60:  Go HERE.

  • Cisco Wireless Control System need wireless Lan Controller ?

    Cisco Wireless Control System need wireless Lan Controller , for Rogue detection

    Hi Joao,
    The WCS is used in conjuntion with the WLC (Wireless Lan Controller) for Rogue Detection. It is not a must for this function but more of an add-on :)
    The Cisco WCS is an optional network component that works in conjunction with Cisco Aironet Lightweight Access Points, Cisco wireless LAN controllers and the Cisco Wireless Location Appliance.
    From this doc;
    http://www.cisco.com/en/US/products/ps6305/index.html
    Overview of WCS
    The Cisco Wireless Control System (WCS) is a Cisco Unified Wireless Network Solution management tool that adds to the capabilities of the web user interface and command line interface (CLI), moving from individual controllers to a network of controllers. WCS includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
    WCS runs on Windows 2003 and Red Hat Enterprise Linux ES 4.0 and AS 4.0 servers. On both Windows and Linux, WCS can run as a normal application or as a service, which runs continuously and resumes running after a reboot.
    The WCS user interface enables operators to control all permitted Cisco Unified Wireless Network Solution configuration, monitoring, and control functions through Internet Explorer 6.0 or later. Operator permissions are defined by the administrator using the WCS user interface Administration menu, which enables the administrator to manage user accounts and schedule periodic maintenance tasks.
    WCS simplifies controller configuration and monitoring while reducing data entry errors with the Cisco Unified Wireless Network Controller autodiscovery algorithm. WCS uses the industry-standard SNMP protocol to communicate with the controllers.
    From this good doc;
    http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7270.html#wp1131195
    Detect and Locate Rogue Access Points
    From this WCS doc;
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806f070a.shtml#new5
    Rogue Detection under Unified Wireless Networks
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
    Hope this helps!
    Rob

  • Inline Posture between Cisco ISE and Wireless LAN Controller

    Hi,
    I was looking into Cisco ISE solution for deploying NAC.
    I have a question about the network topology.
    In  the user guide documents of cisco ISE, it is written that for Wireless  LAN Controllers (WLC) and VPN devices, an additional server, Inline Posture, is needed.
    However, in the following integration document, there is not an inline posture between WLC and Cisco ISE server.
    https://supportforums.cisco.com/docs/DOC-18121
    I  want to know if Inline Posture is a requirement, if not a  requirement, what are the benefits of having it between Cisco ISE Server  and WLC.
    Thanks & Regards
    Sinan

    Hello,
    Please go through below mentioned links which might be helpful for you.
    http://www.cisco.com/en/US/docs/security/ise/1.2/user_guide/ise_ipep_deploy.html
    http://www.cisco.com/en/US/docs/security/ise/1.2/installation_guide/ise_deploy.html
    Best Regards,

  • Cisco Wireless LAN Controller Always disconnect

    Dear All,
    Please help to assist my issue.I used Cisco Wireless LAN Controller model: 5508 with version 7.0.98.0 and I got issue with connection always disconnect ping always loss or some time client can't get DHCP from Controller. 
    - I configure as Internal DHCP Server with 1 SSID.
    http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/110865-dhcp-wlc.html
    - DHCP least is not full and I also try to clear-lease all but still not work.

    1. Config dhcp proxy enable
    2. In case of internal Dhcp, try debug for clients
     using,
    debug client <MAC ADDRESS OF CLIENT>

  • Getting Starting With Cisco Wireless LAN Solution

    Can someone send me a link that will help me understand Cisco Wireless solution. I'm looking to install mybe the Aironet 1200 or 1300 wireless LAN. I need some good documentation so that I will fully understand the technology.
    Thanks,

    This should get you going.
    http://www.cisco.com/en/US/products/sw/cscowork/ps3915/index.html
    http://www.cisco.com/en/US/products/ps6379/index.html
    http://www.cisco.com/en/US/products/ps6305/index.html
    http://www.cisco.com/en/US/products/ps6386/index.html
    Hope these help.
    please remember to rate all replies

Maybe you are looking for