Cisco 3640 - Error : Uncompression of the image failed.

Having a problem booting my Cisco 3640 Router and get the following errors in boot "rommon" mode:
Error : Uncompression of the image failed.
invalid compressed data--format violated
Error : zip decompress failed
Does anyone know what might cause this and what I can do to get it booted up into IOS?
Thanks, Scott

Update - I have already tried uploading a new image to flash: using the rommon> xmodem command and got the same results. Thinking that my flash SIMM card was toast, I then tried installing the IOS image from a PCMCIA Smart card. Again, got the same errors. Anyone know what might cause these errors and how to fix them?

Similar Messages

  • HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

    I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. Help!

    I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!

    Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?

  • An error occurred saving the images to the chosen file location

    I am trying to save the scans from my HP Officejet 6500.  I receive the following error message:
    An error occurred saving the images to the chosen file location.
    I have Win 7.
    I can scan and save if I choose to use the picture option but I can't use the feeder with the picture option.  It is only good if I have 1 page.

    I received this exact same message:
    an error occurred saving the images to the chosen file location.
    8,[(8,106,0)]
    I have not had the time to verify this, but I suspect the security settings on any other location you specify are not the same as those of the default.  i.e. C:\Users\%Username%\Documents\My Scans
    When I used the default location and base name the software provided, it worked.
    My guess is Microsoft and/or HP may have changed the security permissions for something in the path folders and the Scanning Software is therefore not permitted to write into the location you entered.

  • Can receive but not send emails in Outlook 2010 - error message 0x8DE000006 The operation failed

    I an @outlook.com email in my Outlook 2010 which worked well at first.
    It now come up with the error message - error message 0x8DE000006 The operation failed and on my Sync Issues it has the following note:
    19:35:57 Error: 3209. Server. We noticed some unusual activity in your Hotmail account. To help protect you, we've temporarily blocked your account.. 
    19:35:57 Contact Support (with the live link which brought me here)
    Which brought me here......any support would be amazing! Thanks

    19:35:57 Error: 3209. Server. We noticed some unusual activity in your Hotmail account. To help protect you, we've temporarily blocked your account.. 
    From this message, it seems that your Outlook.com account is blocked due to some unusual activity. Please first try login to your webmail and check if you can send emails from there. If you can't send email even from webmail, we may try to follow the following
    instructions to unblock your account to resolve the issue:
    http://windows.microsoft.com/en-IN/windows/outlook/account-temporarily-blocked
    Hope this helps.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • EWS, Office 365, An internal server error occurred. The operation failed.

    I am using EWS 2.0 to access a users calendar in Office 365. I use AutoDiscover to find the ExchagneService, then bind to the calendar via CalendarFolder.Bind and at the next statement folder.FindAppointments I get the error
    An internal server error occurred. The operation failed.
    I know that the credentials used to access the user are correct - have tested in the webmail and it works just fine.
    If I use my own credentials (after having assigned rights to the user in question) my program does not fail. Only apparent difference is the administrator role.
    Below I have listed the central parts of the code:
    First the AutoDiscover (which work)
    service = new ExchangeService(ExchangeVersion.Exchange2010_SP1,TimeZoneInfo.Local ); // service is a global variable
    service.Credentials = new NetworkCredential(ConfigClass.CalendarReaderName, ConfigClass.CalendarReaderPassword);
    service.AutodiscoverUrl(cal, RedirectionUrlValidationCallback);
    Then the part where I want to get the appointments
    CalendarView view = new CalendarView(_firstdate, _lastdate);
    Mailbox mailbox = new Mailbox(cal); // cal is the e-mail address of the user
    FolderId id = new FolderId(WellKnownFolderName.Calendar, mailbox);
    CalendarFolder folder = CalendarFolder.Bind(service, id);
    FindItemsResults<Appointment> findResults = folder.FindAppointments(view); // This is where the error occurs
    Anybody know what this error actually means and how to solve the situation. I want to run the program using a service account rather than my personal credentials.

    the error came back - but the trace revealed the error:
            <m:ResponseMessages>
              <m:FindItemResponseMessage ResponseClass="Error">
                <m:MessageText>An internal server error occurred. The operation failed.</m:MessageText>
                <m:ResponseCode>ErrorInternalServerError</m:ResponseCode>
                <m:DescriptiveLinkKey>0</m:DescriptiveLinkKey>
                <m:MessageXml>
                  <t:Value Name="InnerErrorMessageText">Too many concurrent connections opened.</t:Value>
                  <t:Value Name="InnerErrorResponseCode">ErrorTooManyObjectsOpened</t:Value>
                  <t:Value Name="InnerErrorDescriptiveLinkKey">0</t:Value>
                </m:MessageXml>
              </m:FindItemResponseMessage>
            </m:ResponseMessages>
          </m:FindItemResponse>
        </s:Body>
      </s:Envelope>
    </Trace>
    The account is used for other purposes as well - looking into other calendars. And I have seen this limitation before and read that it is a timing issue.
    I guess I need to use another account ...

  • HT4519 I have a yahoo email account and i keep getting an "error connection to the server failed"

    The email account i have always used on my ipad mini is through yahoo. Now i keep getting an error "connection to the server failed" when trying to access my email.

    its a common message but could be due to several possible causes
    try this
    close the mail app by double tapping the home button, swipe the screen until you see the large icon of the mail app.  Swipe the app up and off the screen to close. Tap the home button to return to home screen. Open mail app again.
    if that didn't work, then...
    Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
    If that doesn't work then reset the device by going to settings/general/reset/reset all settings  (or for network connection issues 'reset network settings').
    (no media or data will be deleted from the device, this will only take a minute).
    Unplug your wifi router for 5-10 minutes and at the same time reset settings on the ipad
    settings/general/reset/reset all settings
    (no data will be lost)

  • NWDI Creating Track Error:Communication with the CMS failed

    Hi All,
    We are trying to setup NWDI in our landscape.When we are going to setup an NWDI Track for EP 7.0 SP16 ,getting the message
    Validation Error: Communication with the CMS failed. Ensure that the URL is correct, that the CMS is up an running, and that the given user has administrative access rights for the CMS
    Can any body help us.We are new to NWDI.
    Regards,
    Vijay

    Vijay...
    In your landscape navigate to
    http://<host>:<port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms
    Select "Landscape Configurator"
    Now select "Domain Data"
    There check the CMS credentials.....
    Get it cross checked with basis team...if you are using correct CMS URL....
    Second user that you have given there for login purpose must be replication of NWDI_CMSADM user id...
    Compare your user with this user permissions and roles.

  • Error in Creating the Oracle Fail Safe Group during installation on MSCS

    Hi All,
    I am installing ECC 6 dual stack on MSCS.
    I have done steps till CI installation as per installation guide.
    I am gettig the following error in the step "Creating the Oracle fail safe group" while changing physical hostname into the virtual databse hostname using configtool in secure store parameter jdbc/pool/<SAPSID>Url as per the installation guide.
    "Error occurred while working with configuration(scanning)
    MSG:Error while connecting to the database"
    I think it is not accepting the virtual hostname.
    In our scenario CI is running CI node and DB instance is running on DB node.
    I have followed the steps as per the installation guide.
    Please let me know how to resolve this issue.
    Database - Oracle 10g,OS is Windows server 2008 enterprse edition.
    Regards,
    Dinakar
    Edited by: mutnuru dinakar on Jun 1, 2011 1:39 PM
    Edited by: mutnuru dinakar on Jun 1, 2011 1:40 PM

    Hi,
    Thanks for your reply.
    1) did you stop the CI before making the modifications as stated in the installation guide?
         Yes
    2) is your database currently running on the same physical cluster node as your CI?
        No.Database instance is running on DB node and CI is on CI node.
    3) is your database online?
         Yes,it is up and running
    Please let me know if there is anyway to resolve this issue.
    Regards,
    Dinakar

  • I have photoshop 7.0 which has stopped working on my computer. When I try to open an image in Photoshop it gives me an error message saying the image is damaged or corrupted. I can open the same image in other image programs.

    Can anyone help me. I have tried uninstalling it and reinstalling it but nothing helps. I can not afford to spend money on a new program.

    First step: update Photoshop to 7.0.1.
    Second step:  provide sensible information:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Error when inserting the image in WAD

    Hi,
    I have inserted a .gif image in MIME repository and then in WAD template I have inserted a image and then when I ry to execute the WAD template, everything is working fine in the report but the image/logo is not displayed, the link is being displayed...
    And a warning is displayed at the bottom of the WAD template:
    W2   42:46  Tag '<img>' lacks 'alt' attribute
    tag '<img>' lacks 'alt' attribute: Correct the Template in the editor
    How do I resolve this error???
    Thanks & Regards.

    Hi,
    check whether the "default_host/sap/bw/Mime" service is active  with T-code  SICF.
    logo file name should be in lower case even though it is upper case in MIME repository.
    (Logo path looks like this "sap/bw/Mime/Customer/Images/testlogo.gif")
    Regards,
    Daya Sagar

  • Can we show custom error message if the user fail to log in MII system.

    Hi,
    Is it possible to show a custom error message when a log in is failed because of access restrictions?
    I am using xMII version 11.5
    Thanks
    Regards,
    Neha Maheshwari

    Since you are on 11.5, it is possible to make edits to some of the system jsp pages, etc. but it would NOT be my recommendation to do so.  Since the NetWeaver versions for MII 12.0 and beyond use UME for the login instead of the LHSecurity engine, this would be a very short term change.
    What specific changes would you like to make, the login page messages, query result messages, applet messages?

  • Error Uncompressing using the Zip Package

    Hi There,
    I have xml data that I have been compressing into a byte array and writing to a file. I use the deflater to compress the data and then the inflater to uncompress the data.
    This has been working fine for some time but now I have found a couple of cases where I get the following exception when I am uncompressing data.
    java.util.zip.DataFormatException: incorrect data check
    at java.util.zip.Inflater.inflateBytes(Native Method)
    at java.util.zip.Inflater.inflate(Unknown Source)
    at java.util.zip.Inflater.inflate(Unknown Source)
    I have no idea what is different to cause this exception.
    Has someone experienced this hardship?
    Is there a limitation of this package that I might be suffering from?
    thanks for any info.

    Are you working on the US payroll?
    Looks like some issue with regards to the address.
    Where exactly do you get this error?
    regards,
    Sandeep

  • Photoshop-error pixelbars across the image

    greetings to you guys,
    i´ve travelled to this far away forum in hindsight of a recent problem i encountered, to which i couldn´t come up with a solution so far.
    so here it is: i´ve spent some hours painting this image, saved, went to play some skyrim, decided to conttinue painting, fired up photoshop and BAM - multiple pixelstripes across only a single lay
    i´ve had that happen to me yesterday,when i was painting something else, when some random green error pixels popped up, which instantly went away,after being touched by a brush or whatever ("brushed them off" with a 1opacity brush, so it wasn´t that big of a hindrance, still a strange thing to encounter though :/)
    here´s the question: has anyone of you here ever encountered such an error,where strange pixel lines suddenly popped up? did you come up with a fix as well? :O
    he´re my specs:
    Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1
    System architecture: AMD CPU FX-6350
    Physical processor count: 6
    Processor speed: 3913 MHz
    Built-in memory: 16283 MB
    GPU: Asus HD 7790 1GB
    using a wacom intuos 5
    +i´m using 260gb scratch space
    +didn´t have any issues with my old rig, which used a nvdia gfx card
    + img size is 4900x3500px 300dpi rgb 8bit color - used to work with those settings on my old rig as well
    + the rig is newly built and these were my first paintings on this machine, which is why i´m worried, that the hardware could be malfunctioning :/ :/
    thank you in advance for your assistance, everyone! cheers

    Thanks for your quick reply, Chris!
    It never occured to me to update photoshop itself, which I now feel a little dumb for haha ^^ my gpu driver is up to date and I´ve also just finished updating PS!
    I´ll report back, should there be another occurence of those strange pixel bars
    Just asking though - I found some hints on this topic in an old arts forum, where it was suggested, that bad gfx cards could be the cause for such stripes, but the thing is,that they usually occur in a single layer and are 100% opaque, which would suggest, that the problem should be program-side
    Thanks again,mate!

  • Hi All,trying to sync.getting error: connection to the server failed

    Hi All,
    I am trying to synchronize with sap,getting error:
    "sync.log,connection to server failed".
    we are using OMC ToughBook panasonic cf 18 IP54 rated IP54, inbuilt GPRS tablet, Windows 2000 .
    Please give the some cases why these error's will occur.
    please give in detail ...
    Thanks&Regards.
    Bharat

    Hi Bharat,
    why open another Task for the same question?
    Your question is a little to wide open - unfortunately. As I said in the other blog - have a lock into the general TCP/IP settings. Is standard WWW browsing possible? Can you reach the NWA page from Toughbook?
    And as my previous workmatre said - check the log please and send us the relevant part. I expect it says just, host not found or so - so please do the above checks as well. It is not the HArdware as such, it is your configuration and this is problematic to tell with just that one sentence you gave us.
    Hope we get you started from here!
    Regards,
    Oliver

Maybe you are looking for