Cisco 3650 not working with Cisco 8831 Conference IP phone

hi all,
i'm not a fan of 3650 switch as it's giving me problems.
the 3650 can CDP and HTTP to 8831 but CUCM says "not registered."
the 8831 works fine with 3560 and can register to our CUCM.
just want to know if 3650 supports 8831?
can't seem to see any docu or links.

I have the same issue, changed the 3650 IOS-XE to many versions with no luck.

Similar Messages

CISCO Box not working with Infrared Remove Control Repeater

There was an Infrared Remote Control Repeater set-up in my newly purchased house. It works for my LG DVD player, but does not work with my CISCO CHS435HDB box. Are there any work around for this? Should I change to a different box?

If you are using a repeater, make sure the piece that is relaying the IR signal is pointing directly the font of the Cisco box and nothing is plugged into the IR input port in the back of the box.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Adaptiva Software Distribution not working with Cisco APs in Local Mode

A worldwide customer would like to use a new Software distribution system called Adaptiva to replace SCCM within Windows environment. As far as I understand, Adaptiva is designed to work like a snowball system. A single PC at a remote side can be "infected" with new Software and will distribute the package to other PCs within the same IP-subnet, saving WAN bandwidth.
First tests are showing that it is working well with Cisco WLAN solution as long as we are using Flexconnect WLAN APs.
Customer locations with Local WLAN AP design create problems for this new software distribution method.
The WLAN-PCs can be reached from outside, but the establishment of the Client/Server-model between the WLAN Clients is not working. The Port used by this software for communication between clients in each WLAN subnet is UDP Port 34329.
Our WLCs are running at 7.4.130.0. The problem is appearing independently of AP Multicast settings or Broadcast Forwarding. Enabling Broadcast forwarding without Reboot did not improve the situation.
Global Multicast Mode and IGMP Snooping are also of no influence.
P2P Blocking Action is "Disabled" within the WLAN setup.
Who has any idea what might cause this communication problem between WLAN clients in Local Mode of APs ?
Thank You for answers
Wini

I can think of two solutions. You could 1: turn the "auto-lock" to never, so that your phone never sleeps. Or, you could 2: jailbreak your iPhone and install "insomnia". I wish we had the Cisco Mobile app. I usually use wifi/insomnia and turn data off at work since we have wireless pretty much everywhere...
Sent from Cisco Technical Support iPad App

Cisco 877 - not working with apple devices

Hello all,
I'm hoping someone can help me with a problem I have with my 877 adsl router.
A bit of background:
I have set this up as my home router to the internet, which is connected to a Linksys WRT54GL as a wireless access point.
My windows & Linux devices/laptops all work fine over this setup and connect without a problem
However, all my apple devices, phones and ipads don't fully work. I can get to google and a handful of pages, but not the store or games or facebook etc. (my daughter thinks its the end of the world - without FB and instagram)
If I take out the Cisco and put a Thompson router in, it all works fine. so I'm assuming it something with the Cisco config.
Below is the config I'm using on the router
Any pointers would be most appreciated.
ddhrouter#sh run
Building configuration...
Current configuration : 2292 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname ddhrouter
boot-start-marker
boot-end-marker
enable secret 5 mysecret
no aaa new-model
dot11 syslog
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1
ip dhcp pool CISCODHCP
   network 192.168.1.0 255.255.255.0
   dns-server 212.50.160.100 213.249.130.100 8.8.8.8
   default-router 192.168.1.1
ip name-server 212.50.160.100
ip name-server 213.249.130.100
ip name-server 8.8.8.8
username cisco privilege 15 password 0 mysecret
archive
log config
hidekeys
interface ATM0
description ** adsl interface **
mtu 1452
no ip address
load-interval 30
no atm ilmi-keepalive
pvc 1/50
ubr 288
encapsulation aal5mux ppp dialer
dialer pool-member 1
dsl operating-mode auto
hold-queue 224 in
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface Vlan1
description ** local lan **
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
hold-queue 100 out
interface Dialer0
no ip address
interface Dialer10
description ** adsl dialer interface **
ip address negotiated
ip mtu 1482
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
ppp chap hostname myusername
ppp chap password 0 mypassword
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer10
no ip http server
no ip http secure-server
ip http max-connections 4
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list 1 interface Dialer10 overload
ip access-list extended TerminalAccess
permit tcp host 192.168.1.0 any eq telnet
permit tcp any any eq 22
deny   tcp any any
ip access-list extended no_telnet
deny   tcp any any eq telnet
access-list 1 remark INSIDE_IF=Ethernet0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 192.0.0.0 0.255.255.255
access-list 110 permit icmp any any echo
access-list 110 permit icmp any any echo-reply
dialer-list 1 protocol ip permit
control-plane
line con 0
password password
no modem enable
line aux 0
line vty 0 4
access-class TerminalAccess in
password password
login
scheduler max-task-time 5000
end
ddhrouter#
all I'm after is a standard setup for my router. allow any out - deny any in.
Many thanks in advance.
Dave

ooo, you left your username, password, and enable in in clear text in the config you pasted, as well as not having an outside ACL applied and the VTY ACL allowing ssh from anywhere. Luckily the outside IP address isn't in the config or I'm sure someone would get ahold of your router....:) You should apply an outside access list and a firewall (I prefer CBAC firewall config for ease of use, but there is Zone based) to fix this. I assume ACL 110 was meant to be your outside ACL but it just isn't applied.
That being said Jody is likely right. PPPoE requires you to shrink your packet size (MTU/MSS) to allow room for the encapsulation that gets added to the packet. The command he supplied should fix this.
The 'ip mtu 1482' on the dialer interface may be too large as well.

Cisco VPN not working with Lion OSX 10.7

Cisco VPN Client Application did not launch after upgrading to Lion OSX v10.7.
I read https://discussions.apple.com/thread/3192535 that suggested rebooting in with a 32bit kernal.
Hold down the '3' and the '2' keys while rebooting to reboot in 32bit mode.
I did this and now my existing Cisco VPN works fine.

Check this out to solve the Cisco ASA connection from OSX 10.7 Lion from rcarrito originally posted under this link:
https://supportforums.cisco.com/thread/2095921
Nov 8, 2011 12:19 PM (in response to dylan.scholz)
Cisco VPN Client & OSX Lion
I have been successfully using the built in Mac OS X IPSec client on Lion 10.7.2 for a couple months now. I have no need for the Cisco IPSec client anymore and to boot into stupid 32-bit mode .
Not sure if the issues you guys are having but I followed this guide and it works perfectly. Most of my customers I only have a .pcf file for, which of course, I cannot use to figure out the groupname and password....until now...
http://anders.com/guides/native-cisco-vpn-on-mac-os-x/
I don't know if this will help with SonicWall but my problem for the ASA is solved.

Mobile Printer ( Zebra RW420 ) Not Working with Cisco AP

Good Morning everyone,
In cold area -3 inside a warehouse I am trying to connect a mobile printer ( Zebra RW420 ) to cisco access points of model AIR-LAP1242AG-A-K9 and AIR-LAP1252AG-E-K9 which are woking through WLAN controlar version 6.0.202.0 ,the mobile printer is connecting to cisco AP but shown without IP address , where the IP is configured static , since it's connectiong and working fine with motorola AP .
after upgrading the firmware of mobile printer, I faced the same issue in dry area.
Any ideas please ?

Hi Leo ,
Kindly find the below results :-
(WiSM-slot4-2) >show interface detailed label
Interface Name................................... label
MAC Address...................................... c4:7d:4f:bd:d4:4b
IP Address....................................... 10.161.20.123
IP Netmask....................................... 255.255.255.128
IP Gateway....................................... 10.161.20.126
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
VLAN............................................. 502
Quarantine-vlan.................................. 0
Active Physical Port............................. LAG (29)
Primary Physical Port............................ LAG (29)
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. Unconfigured
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... No
Guest Interface.................................. No
(WiSM-slot4-2) >debug client 00:15:70:21:8a:34
(WiSM-slot4-2) >*Dec 24 10:14:44.575: 00:15:70:21:8a:34 Association received fro
m mobile on AP 00:1a:e3:01:84:e0
*Dec 24 10:14:44.575: 00:15:70:21:8a:34 Applying site-specific IPv6 override for
station 00:15:70:21:8a:34 - vapId 6, site 'DC993', interface 'label'
*Dec 24 10:14:44.575: 00:15:70:21:8a:34 Applying IPv6 Interface Policy for stati
on 00:15:70:21:8a:34 - vlan 502, interface id 12, interface 'label'
*Dec 24 10:14:44.575: 00:15:70:21:8a:34 Applying site-specific override for stat
ion 00:15:70:21:8a:34 - vapId 6, site 'DC993', interface 'label'
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Changing ACL 'none
' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1276)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 STA - rates (4): 2 4 11 22 0 0 0 0 0 0 0
0 0 0 0 0
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Deleted mobile LWA
PP rule on AP [68:ef:bd:2e:7a:10]
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 Updated location for station old AP 68:e
f:bd:2e:7a:10-0, new AP 00:1a:e3:01:84:e0-0
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Change state to ST
ART (0) last state DHCP_REQD (7)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 START (0) Initializing policy
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 START (0) Change state to AUTHCH
ECK (2) last state DHCP_REQD (7)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 AUTHCHECK (2) Change state to L2
AUTHCOMPLETE (4) last state DHCP_REQD (7)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobil
e LWAPP rule on AP 00:1a:e3:01:84:e0 vapId 6 apVapId 1
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 L2AUTHCOMPLETE (4) Change state
to DHCP_REQD (7) last state DHCP_REQD (7)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) pemApfAddMobileSta
tion2 2514, Adding TMP rule
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Adding Fast Path r
ule
type = Airespace AP - Learn IP address
on AP 00:1a:e3:01:84:e0, slot 0, interface = 29, QOS = 0
ACL Id = 255, Jumbo F
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Successfully plumb
ed mobile rule (ACL ID 255)
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) pemApfAddMobileSta
tion2 2630, Adding TMP rule
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Replacing Fast Pat
h rule
type = Airespace AP - Learn IP address
on AP 00:1a:e3:01:84:e0, slot 0, interface = 29, QOS = 0
ACL Id = 255, Jumb
*Dec 24 10:14:44.576: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Successfully plumb
ed mobile rule (ACL ID 255)
*Dec 24 10:14:44.577: 00:15:70:21:8a:34 apfPemAddUser2 (apf_policy.c:213) Changi
ng state for mobile 00:15:70:21:8a:34 on AP 00:1a:e3:01:84:e0 from Associated to
Associated
*Dec 24 10:14:44.577: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station:
(callerId: 49) in 1800 seconds
*Dec 24 10:14:44.577: 00:15:70:21:8a:34 Sending Assoc Response to station on BSS
ID 00:1a:e3:01:84:e0 (status 0) Vap Id 1 Slot 0
*Dec 24 10:14:44.577: 00:15:70:21:8a:34 apfProcessAssocReq (apf_80211.c:4391) Ch
anging state for mobile 00:15:70:21:8a:34 on AP 00:1a:e3:01:84:e0 from Associate
d to Associated
*Dec 24 10:14:44.582: 00:15:70:21:8a:34 0.0.0.0 Removed NPU entry.
*Dec 24 10:14:44.586: 00:15:70:21:8a:34 0.0.0.0 Added NPU entry of type 9, dtlFl
ags 0x0
(WiSM-slot4-2) >*Dec 24 10:14:44.591: 00:15:70:21:8a:34 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*Dec 24 10:16:44.550: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
*Dec 24 10:16:44.550: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.
*Dec 24 10:16:44.550: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station: (callerId: 12) in 10 seconds
*Dec 24 10:16:54.550: 00:15:70:21:8a:34 apfMsExpireCallback (apf_ms.c:418) Expiring Mobile!
*Dec 24 10:16:54.551: 00:15:70:21:8a:34 apfMsExpireMobileStation (apf_ms.c:4427) Changing state for mobile 00:15:70:21:8a:34 on AP 00:1a:e3:01:84:e0 from Associated to Disasso
ciated
*Dec 24 10:16:54.551: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
*Dec 24 10:17:04.550: 00:15:70:21:8a:34 apfMsExpireCallback (apf_ms.c:418) Expiring Mobile!
*Dec 24 10:17:04.551: 00:15:70:21:8a:34 Sent Deauthenticate to mobile on BSSID 00:1a:e3:01:84:e0 slot 0(caller apf_ms.c:4511)
*Dec 24 10:17:04.552: 00:15:70:21:8a:34 apfMsExpireMobileStation (apf_ms.c:4548) Changing state for mobile 00:15:70:21:8a:34 on AP 00:1a:e3:01:84:e0 from Disassociated to Idle
*Dec 24 10:17:04.552: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [00:1a:e3:01:84:e0]
*Dec 24 10:17:04.552: 00:15:70:21:8a:34 Deleting mobile on AP 00:1a:e3:01:84:e0(0)
*Dec 24 10:17:04.555: 00:15:70:21:8a:34 0.0.0.0 Removed NPU entry.
*Dec 24 10:17:04.568: 00:15:70:21:8a:34 Adding mobile on LWAPP AP 00:1a:e3:01:84:e0(0)
*Dec 24 10:17:04.568: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station: (callerId: 23) in 5 seconds
*Dec 24 10:17:04.568: 00:15:70:21:8a:34 apfProcessProbeReq (apf_80211.c:4761) Changing state for mobile 00:15:70:21:8a:34 on AP 00:1a:e3:01:84:e0 from Idle to Probe
*Dec 24 10:17:04.788: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station: (callerId: 24) in 5 seconds
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Association received from mobile on AP 68:ef:bd:2e:7a:10
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Applying site-specific IPv6 override for station 00:15:70:21:8a:34 - vapId 6, site 'DC993', interface 'label'
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Applying IPv6 Interface Policy for station 00:15:70:21:8a:34 - vlan 502, interface id 12, interface 'label'
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Applying site-specific override for station 00:15:70:21:8a:34 - vapId 6, site 'DC993', interface 'label'
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1276)
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 STA - rates (4): 2 4 11 22 0 0 0 0 0 0 0 0 0 0 0 0
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [00:1a:e3:01:84:e0]
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Updated location for station old AP 00:1a:e3:01:84:e0-0, new AP 68:ef:bd:2e:7a:10-0
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 START (0) Initializing policy
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 AUTHCHECK (2) Change state to L2AUTHCOMPLETE (4) last state L2AUTHCOMPLETE (4)
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 68:ef:bd:2e:7a:10 vapId 6 apVapId 1
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state DHCP_REQD (7)
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 apfPemAddUser2 (apf_policy.c:213) Changing state for mobile 00:15:70:21:8a:34 on AP 68:ef:bd:2e:7a:10 from Probe to Associated
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Scheduling deletion of Mobile Station: (callerId: 49) in 1800 seconds
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 Sending Assoc Response to station on BSSID 68:ef:bd:2e:7a:10 (status 0) Vap Id 1 Slot 0
*Dec 24 10:17:04.813: 00:15:70:21:8a:34 apfProcessAssocReq (apf_80211.c:4391) Changing state for mobile 00:15:70:21:8a:34 on AP 68:ef:bd:2e:7a:10 from Associated to Associated
*Dec 24 10:17:06.751: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCI
ATED
*Dec 24 10:17:06.751: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 4181, Adding TMP rule
*Dec 24 10:17:06.751: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
type = Airespace AP - Learn IP address
on AP 68:ef:bd:2e:7a:10, slot 0, interface = 29, QOS = 0
ACL Id = 255, Jumbo F
*Dec 24 10:17:06.751: 00:15:70:21:8a:34 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (ACL ID 255)
*Dec 24 10:17:06.756: 00:15:70:21:8a:34 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*Dec 24 10:17:06.756: 00:15:70:21:8a:34 Sent an XID frame

Why does my mac not work with cisco E3000 router

It says that it needs os x 10.6.1 or later and I have that and its not working

Ask Cisco, but:
Internet Quick Assist:
http://support.apple.com/kb/HT1144?viewlocale=en_US
Troubleshooting internet settings:
http://support.apple.com/kb/HT1714?viewlocale=en_US

Cisco anyconnect not working with mavericks

Does anybody know how to resolve this problem. I did a clean install of Mavericks didnt help.

What version of AnyConnect are you using? Note the following quote from: http://software.cisco.com/download/release.html?mdfid=283000185&softwareid=28236 4313&release=3.1.04072
The current download for Mac OS X is version 3.1.04074, all other platforms are version 3.1.04072. AnyConnect 3.1.04074 is required for OS X 10.9, all other Mac platforms may use either version 3.1.04074 or 3.1.04072.

External Javascript not working with C# and XAML windows phone app

I've added a WebView into my project. If I navigate to the html file that contains external javascript files they don't work. Bit if I write the javascript code hardcoded into the html file it works properly.
Here is the html portion:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html lang="en" xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta charset="utf-8" />
<title></title>
<script type="text/javascript" src="testjs.js"></script>
</head>
<body>
<div id="abcd"></div>
<br/>
hello! this is a simple html block.
</body>
</html>
Here is the javascript portion:
document.getElementById("abcd").innerHTML = "New text!";
When I open the webview it shows
hello!
this is a simple html block.,
but if the javascript code worked it would show
New
Test! hello! this is a simple html block.
And in the C# code the uri is called this way:
url = onlineTestWebView.BuildLocalStreamUri("myUrl", "problem_page/test.html");
StreamUriWinRTResolver myResolver = new StreamUriWinRTResolver();
onlineTestWebView.NavigateToLocalStreamUri(url, myResolver);

I assume this is because you are using NavigateToString. Please see
http://blogs.msdn.com/b/wsdevsol/archive/2014/06/20/a-primer-on-webview-navigatetolocalstreamuri.aspx
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

IMessage not working with ONE contact after changing phone number

Ok.. I changed my phone number Friday night. (same device) Once I restarted my phone and programmed it (*228) everything was working fine except one contact with iMessage. Since Friday night just one contact will only go through as SMS message. My other imessage users are all going back and forth as blue. This person I am having the problem with is also sending and receiving imessages with other contacts, just to me it is going through as text as well. Any help? I've shut iMessage off and on a bunch of times, turned the phone on and off... nothing seems to be working.. Any advice would be great!

I have the same trouble with one of my contacts and I have been using my iPhone 4S and iPad (3rd generation) for a while. I hope we can get a solution.

ISight not working with Webex, GoToMeeting or Lync...BUT works with Skype, Facetime, Photobooth (June 2013 MBA)

Brand new MacBook Air (June 2013, 8MB RAM, 500GB SSD)
iSight not working with Cisco Webex, Citrix GoToMeeting or Microsoft Lync (error = webcam not detected); BUT iSight works with Skype, Facetime and Photobooth.
3 hours of phone support with Webex - no luck.
Tried SMC and PRAM reset - no luck.
Tried erasing disk and reinstalling OSX 10.8.4 and apps manually with latest versions - no luck.
Apple phone support says it's not Apple's problem because Apple apps work.
Exchanged at Apple Store for another new MacBook Air, again installed apps manually with latest version (not from time machine) - STILL NO LUCK!!!
Is there an update Apple or Cisco, Citrix and Microsoft need to put out for the new MBAs or do I just have 2 lemons???

You're welcome.
1wave wrote: ... an external webcam which might be a cheaper alternative ...
It will be interesting to see what the vendors say about using a Mac-compatible external webcam.
If not, some netbook or other Windows® device might offer compatibility at a much lower cost than a compatible Apple notebook.
We will watch for your update(s). What the vendors tell you will be very helpful to others who share this or similar issues with their new MBAs.
Message was edited by: EZ Jim
Mac OSX 10.8.4

Cisco Aironet FW 15.2 Does not work with Non-Cisco Media Bridges

I have a Cisco Aironet 1142i that was just updated from 12.4(23c)JY to 15.2(4)JA1 (don’t think model matters as the issue seem to be the firmware) and now I cannot get my media bridges (3 different ones) to either connect to the 1142 AP or obtain and pass the DHCP addresses to other device connected to the built in switch. If I reload the 1142 AP firmware to 12.4, than this works fine. I have not seen anything in the release notes that changed how this works or if there is I could not find it.
Does anyone know why this changed and if there is any settings that I need to enabled / disable?
Any help on this would be greatly appreciated

More info to add to this.
AIR-AP1142N-A-K9 Hardware Version of v06 works with firmware 15.2.
AIR-AP1142N-A-K9 Hardware Version v05 does not work with firmware 15.2, but will when downgraded to firmware 12.4.
I'm also having this issue with Cisco Aironet 3602 Fw 15.2(2)JB and 3502 Fw 15.2(2)JB$ that's on a Cisco 2500 WLAN Controller Sw Ver. 7.4.100.0.
Any help on this would be greatly appreciated

Hi Team, I wuold like to know if you have any app to make Firefox OS working with cisco Call Manager 10.5. Something like Cisco Jabber for Android or iOS.

I'm interesting on buying a Firefox Smart Phone, but
I would like to know if are any app to install on Firefox OS smart phone in order to work with cisco call manager 10.5.
Something like Cisco Jabber for Android o iOS.
Thanks,

Hi Itech,
If Cisco Jabber has a webapp, or mobile version of their website available, you should technically be able to access it through Firefox OS.
You may also search Firefox Marketplace for an alternative solution:
* [https://marketplace.firefox.com/]
- Ralph

Lync Server 2010 conference not working with Windows 8.1 and IE 10

Hello,
The problem is that whenever a Windows 8.1 user tries to join a Lync server 2010 conference using Internet Explorer 10 (or 11, tried that too) the user can't join the conference. If the conference is created by a Lync server 2013 user joining works fine.
When using Lync 2010 client we get the following error in the client: "error id 87 source id 7".
When using Lync 2013 client we end up with a blank conversation window.
There are no traces in server log, client log or event log.
Below is a set of use cases that may help you to understand what is the problem scenario. Each of these works or does not work with both Lync 2010 and Lync 2013 client.
- Lync server 2010 conference, windows 7, Chrome, Firefox, IE 10 or 11 --> Works.
- Lync server 2010 conference, windows 8.1, IE 10 or 11 --> Does not work.
- Lync server 2010 conference, windows 8.1, Chrome or Firefox --> Works.
- Lync server 2013 conference, windows 8.1, Chrome, Firefox, IE 10 or 11 --> Works.
It does not help to add the meet address to IE compatibility list (Compatibility View Settings).
If i press F12 in IE and change the document mode of the meet page to IE 9 version then i can join meetings with Windows 8.1 and IE 10. Unfortunately i cannot make that as a default setting for the meet website.
Any ideas on how to get Lync server 2010 meetings working with Windows 8.1 and IE 10 or 11?
IE is the company default browser. Windows 8.1 is not a default operating system but we have increasing number of Windows 8.1 computers in our environment (mainly directors).

According to your description, it is hard to tell whether the issue is related with IE or Lync Server 2010 or both.
Compare the log when Lync client on Window 8.1 with IE 10 or IE 11 join Lync server 2010 conferencing and Lync Server 2013 conferencing.
Lisa Zheng
TechNet Community Support

Cordless phones to work with Cisco SPA122

Hi there,
We have a customer site which has 10x Analogue handsets and some cordless phones running off an old pbx.
We are installing a new system including 10x SPA525's handsets but we need some cordless phones to run alongside them.
Can someone recommend cordless phones which will work with Cisco SPA122's please?

Any one?

Cisco 3650 not working with Cisco 8831 Conference IP phone

Similar Messages

Maybe you are looking for