Cisco 3925 doesn't work together with TC

From my provider I got a new modem/router. The cisco 3925. Via this router directly I came almost to 48Mbps. When I put the TC between it I get not higher then around 5 to 7Mbps.
TC is in bridge mode and both 2.4 and 5Ghz are active.
Can anybody help me what goes wrong here.
Thanks.
Martien

Firstly if the TC is within warranty ring and get Apple support involved, as frankly I doubt we are going to be able to crack it.
Sometimes there are actually issues with the TC and needs to be replaced.
How old is the TC and exactly what model is it? The A number stamped in the rubber mat will tell us enough.
What firmware is it running? If it was running 7.6 before, flash back to 7.5.2 which is a whole lot less buggy.
If the issue was not happening before, then the TC is not happy with the Cisco.. does the cisco have gigabit ethernet LAN ports? Did you test with another ethernet cable? Did you make sure it is connecting at gigabit.. the TC is useless and shows nothing but the Cisco might.
I would like you to do a couple of tests.. to find where the issue is.
Copy a file from your Mac to another computer on your own network, both connected by ethernet. See what speed you get LAN to LAN. This is to make sure the issue is only with LAN to WAN transfer.
Place a switch .. fast ethernet is fine.. ie 100mbit between the TC and Cisco, to see if the issue is link speed.
I have to warn you.. in the end most people who have listed the problem have just given up.. bought a new router (not apple) and bridged the TC and use it purely for wireless and backups.
If the cisco is a router, don't even worry about it.. just bridge the TC and use it for backups only.

Similar Messages

  • Wi-Fi Sharing doesn't work together with mini Display port

    Hello everyone!
    I can tell you fantstic problem. Sorry for my English - i'm from Russia!
    The problem:
    1. Share Wi-Fi via bonjour to other devices such as iPad, iPhone, windows computers, etc. I'm using Mac os X Snow Leopard! Everything is fine!
    2. Just only I plugging hdmi/dvi adapter - INTERNET STOPS TO WORK!!!
    It looks like fantastic. If just I plugging-off remote monitor! Internet works fine! If only turn on! - It doesn't work!
    Can You only believe???
    When you plug remote monitor or plasma TV via mini display port - Wi-Fi sharing is not working!!!
    I try to solwe this problem about 1 year - and found this forum. Nobody on internet ask this question!!!
    How can I solw this problem????
    My assumptions that minidisplay port and bonjour for wi-fi sharing using the same port and mini dispay have more priority!!!
    But it strange - why nobody in internet ask this question!
    Thanks! I'm waiting for you answer!
    P.S: Equipment
    Название модели:          MacBook Pro
      Идентификатор модели:          MacBookPro7,1
      Имя процессора:          Intel Core 2 Duo
      Скорость процессора:          2.4 ГГц
      Количество процессоров:          1
      Общее количество ядер:          2
      Кэш 2-го уровня:          3 МБ
      Память:          6 ГБ
      Частота шины:          1.07 ГГц
      Версия Boot ROM:          MBP71.0039.B0B
      Версия SMC (система):          1.62f6
      Серийный номер (система):          34017YB6ATM
      UUID аппаратного обеспечения:          FB8005A6-CA65-55AE-8695-49DDA4825BD9
      Сенсор внезапного движения:
      Состояние:          Включен
    Snow Leopard !!!

    Yes, I actually checked that it was 7.1.2  Not sure when they released it, but I had been trying to get this to work all last night.
    But I did try something new...I had set restrictions for my son in Settings.  If I turn "off" all restrictions, the app will load properly and bring me to Netflix sign in.
    Do you know what Restiction settings would prevent Netflix from loading?  I naturally want to lock down the iPad so that my son can not surf explicit websites or install, delete, and in-app purchase.  I did add Netflix to approved list though.
    Thanks.

  • Allowfullscreen &  wmode="transparent" doesn't work together

    allowfullscreen & wmode="transparent" doesn't work
    together with IE 6.0, fullscreen doesn't work
    anyone know why??

    "NutsyNalinda" <[email protected]> a
    écrit dans le message de
    news: fr7tga$34r$[email protected]..
    > allowfullscreen & wmode="transparent" doesn't work
    together with IE 6.0,
    > fullscreen doesn't work
    > anyone know why??
    Update your Flash Player
    "Full-screen mode was not originally supported if the wmode
    is opaque or
    transparent windowless, but it is now supported starting with
    the latest
    Flash Player 9 Update on Adobe Labs. If the user has multiple
    monitors,
    Flash Player uses a metric to determine the monitor that
    contains the
    greatest portion of the Flash movie and then goes full-screen
    in that main
    monitor."
    http://www.adobe.com/devnet/flashplayer/articles/full_screen_mode_print.html
    lea

  • How can I create a client console and work together with the Cache Server?

    How can I edit the following Cache-Server.cmd file to create a client console and work together with the Cache Server?
    The following is the cache server file: contacts-cache-server.cmd
    @echo off
    setlocal
    if (%COHERENCE_HOME%)==() (
    set COHERENCE_HOME=c:\coherence
    set CONFIG=C:\home\oracle\coherence\Contacts
    set COH_OPTS=%COH_OPTS% -server -cp %COHERENCE_HOME%\lib\coherence.jar;C:\home\oracle\
    coherence\Contacts;C:\home\oracle\coherence\Contacts\classes;
    set COH_OPTS=%COH_OPTS% -Dtangosol.coherence.cacheconfig=%CONFIG%\contacts-cache-config.xml
    java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3 %4 %5 %6 %7
    :exitEdited by: junez on 23-Oct-2009 09:20

    Hi
    To run the console, change DefaultCacheServer to CacheFactory
    Paul

  • Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

    Hello!
    I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
    Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
    I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
    things I have tried and they still not help:
    # drivers replacement, original were released in 2004. I installed recent version.
    # driver settings, low latency, high latency
    # asio and different settings
    # pluging the interface to another usb socket.
    # trying what happens when I use battery and when I use adapter
    # updated bios
    # turned off onboard units such as wifi card, sound card
    # checked IRQ list
    pops still appear.
    my config:
    Toshiba Satellite Pro L20
    Win XP Home SP3
    Celeron M 1,5GHz
    896Mb ram
    M-Audio Fast Track USB, drivers: 6.0.2
    Kind regards

    Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
    I installed Windows on this computer end set it to best performance possible.
    Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
    Message was edited by: lidia.pochron

  • IPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords

    iPhoto doesn`t work correctly with german "umlaut" (ä,ö,ü) in keywords. They get to ä̈,ö̈, ü̈ when I write the keyword a second time. Can anybody tell me why. Thank you. Heinz

    It apparently does not like non-standard English characters - use A-Z and 0-9 adn you should be OK
    report to Apple - iPhoto menu ==> provide iPhoto feedback
    LN

  • Firefox from version 3.6 to 11 beta doesn't work properly with gmail

    Gmail doesn't work properly with any version of firefox from 3.6 to 11. I have tried several newer versions of firefox and they ALL DO NOT WORK PROPERLY with GMAIL!!!!!! THIS IS VERY FRUSTRATING & ANNOYING!! I can't click on any links or it just keeps saying LOADING when I try to delete a message or even go into the gmail settings.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • [svn] 4028: Bug: Draining of buffered messages doesn' t work correctly with long-polling.

    Revision: 4028
    Author: [email protected]
    Date: 2008-11-06 09:04:26 -0800 (Thu, 06 Nov 2008)
    Log Message:
    Bug: Draining of buffered messages doesn't work correctly with long-polling.
    QA: Yes - please make sure both nio and regular long-polling channels work with throttling.
    Doc: No
    Checkintests: Pass.
    Details: Made sure that buffered messages are drained properly with all polling channels (polling, long-polling, and nio-long-polling).
    Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.java

    Sounds like you've probably already looked but the CUPS article in the wiki led me through setting up a printer without any problems.  http://wiki.archlinux.org/index.php/CUPS
    The first section describes how to troubleshoot CUPS and printing problems.
    I've also found a few other posts and links that may help.
    http://hplipopensource.com/hplip-web/mo … eries.html
    http://ubuntuforums.org/showthread.php?t=419163
    Hope this helps!

  • Someone who can say how to get Adpbe flash player version 11.2.202.197 to work together with Lion on mac mini. Support from Apple can obviously not help the problem and do not care if it works

    Someone who can say how to get Adpbe flash player version 11.2.202.197 to work together with Lion on mac mini. Support from Apple can obviously not help the problem and do not care if it works

    Adobe flash player version 11.2.202.197 is for Windows Vista / Windows 7 / Vista 64 / Windows 7 64
    Adobe Flash Player version 11.1.102.55 is the current version for Snow Leopard and Lion.
    Adobe - Install Adobe Flash Player

  • Does iPhoto 11 works together with a NAS?

    Hi folks,
    does anybody know, if iPhoto 11 works together with a NAS, or does the iPhoto library still needs a MAC journaled HardDisk format?
    Kind regards,
    Michael

    I'm going to say no, none of my libraries have worked over a network very well or at all (lightroom totally blocks it). depending on your format (RAW, TIFF, JPEG), a NAS isn't fast enough to work from usually, unless you have apple supported hardware running fibre channel.
    best bet is to get a decent external drive & use the fastest interface you can (I use firewire 800). another option is to have or do it yourself hard drive upgrade.
    I may try this anyway, my copy is to be delivered tonight.

  • Some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary and  MplayerX and etc

    I face to this problem since new OS, Yosemite has installed on my mac book
    some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary (mac dictionary) and  MplayerX and etc
    For example when I make MplayerX and such application fullscreen the screen become white and just voice of video can be heard  or when I use Mac Dictionary (look-up dictionary) in any pages the meaning of work is not appear ( look at the picture above), so i need to directly open dictionary to find the meaning.
    Please help me
    tq

    Same thing here with MPlayerX (annoying)

  • Google News doesn't work properly with Safari 5.1.4

    Has anyone else noticed that Google News doesn't work properly with Safari 5.1.4?

    Thank you for your response.  The more I use 5.1.4 the more problems I am seeing.  There are problems with images and layout.  I would like to back up to 5.1.3 but the system won't let me. At present I a looking for a solution, or I might just start using Firefox.

  • How notification system work together with Acrobat X Pro?

    Hi everyone,
    I use Adobe Acrobat 10 Pro to implement Distributed PDF Form in my organization. I have some problem about this.
    When client fill information in application form on our distribution server,Do you have solution that Acrobat 10 Pro can send a notification to specific authorized
    prerson for his/her Digital Signature?
    example : Mr.A filled some information about Purchase Order. System require his supervisor's digital signature so, Acrobat send notification to his supervisor automatically.
    I have some idea about Active Directory work together with Acrobat but, I don't know how to use both of it together.
    Any advice will help me so much.
    Best Regards,
    Charles
    PS. sorry about my poor english

    Thank you so much about your suggestion.
    Do you know how i can integrate Acrobat X Pro with Active Directory?
    I look forwarding to hear from you.Thank you.
    Chompunoot
    Date: Thu, 2 Jun 2011 19:29:41 -0600
    From: [email protected]
    To: [email protected]
    Subject: How notification system work together with Acrobat X Pro?
    Hi Charles,
    You want to modify the signature field properties and set a script to execute when the field is signed.
    Here's how to get started in Acrobat X:
    Open the file that will eventually be uploaded to the server
    Click Tools on the top right to open the Tools panel
    Expand Forms (click on Forms so you can see the buttons underneath)
    Click the Edit button
    Right mouse click on the first signature field and then click Properties from the pop-up menu
    Select the Signed tab on the Digital Signature Properties dialog
    Select the This script executes when the field is signed radio button
    Click the Edit button
    Add the following in the JavaScript Editor dialog:
              var cMyMsg = "Please log on the server and sign the document";
              app.mailMsg ({
                  bUI: true,
                  cTo: "mailto:[email protected]",
                  cSubject: "A document requires your attention",
                  cMsg: cMyMsg
    Click the OK button on the JavaScript Editor dialog
    Click the Close button on the Digital Signature Properties dialog
    Click the Close Form Editing button in the Forms panel under Tools
    Save the PDF file
    It's going to look something like this:
    http://forums.adobe.com/servlet/JiveServlet/showImage/70913/SignScript.jpg
    Give that a try and from and see what you think. You can set the strings as necessary and repeat for each signature field (except for the last one )
    Steve
    >

  • Does Tech21 Impact Band Case for iPhone 5 work together with a screen film?

    Does Tech21 Impact Band Case for iPhone 5 work together with a screen film? If it does what kind of screen film?

    A standard screen protector seems to large, when mounting the Band Case the edges on the screen protector get loose.

  • Ask Best Practice How to Work Together with ADF

    Hi,
    I'm using JDev 10.1.3.3 with CVS. Could someone show me best practice to work together in team to build an application using ADF Faces, EBJ and TopLink.
    I've read ADF Developer guide about collaboration with CVS, but still doesn't give enough best practice for me.
    For example, let say i have Oracle DB 11g as database and my application have 3 module (finance, sales and callcenter). The 3 module will access same database, schema and tablespace.
    I have 5 developer in team, now my problem is sometimes DataModel can make conflict with the other because we edit the file together (toplink.mwp), UserInterface also can make a conflict with file FacesConfig.xml, databindings.cpx etc.
    Please share some best practice.

    There's a new set of articles about team development with Subversion that you should probably read here:
    http://www.oracle.com/technology/pub/articles/adf-development-essentials/index.html

Maybe you are looking for