Cisco 4400 summary page doesn't display proper # of active AP's

4400 series WLC with 100 supported AP's.
present capacity is 62 active AP's but summary only shows 48 active...Why???????

I'm sure this has been figured out by now, but just in case it hasn't, or the solution was unclear, you probably only have one of the controller's gigabit interfaces plugged in, or you don't have enough ap-managers configured. For more than 48 APs, you need more than one link connected. If you are using LAG, you should be all set with one ap-manager. If you are not using LAG, you need to connect at least two ports for 62 APs, and you will need a second ap-manager IP address configured.
Regards,
Scott

Similar Messages

  • Basic Setup Page doesn't display correctly.

    I logged into my WRT54G router today to change some settings around but the page doesn't display any of the writing or links at the top of the page. I've tried reloading the page and resetting the router but neither of these worked.

    Also when I click the "save changes" button nothing happens. When I opened the page in IE it gave me the Error on Page thing and I clicked it to see the errors. I had 52 errors total with the reason Object Expected for each one.

  • Page doesn't display properly in IE 6

    Hi ppl.. My site doesn't display correctly in IE 6. (It works fine with IE 7 and 8 and Firefox) I can see through the area which is supposed to be white ( in other words, I see the background which I put in my body tag). I'm guessing that this happens because the overflow portion of my main content area is set to hidden. Is there anything I can change to rectify this?  Below is my url. Sorry if my post sounds confusing. If you need any details, pls ask me.. Thank you!
    http://www.readislam.net/darulhuda/aqeedah1.shtml

    Differences in rendering abound between IE6 and all other browsers. But this is what I found when I ran your page through w3c validation: http://validator.w3.org/check?uri=http://www.readislam.net/darulhuda/aqeedah1.shtml&charse t=(detect+automatically)&doctype=Inline&group=0
    I often see white turning up as transparent, though mostly in transparent gifs. My ploy in that case is to use a slightly off-white, usually #FFFFFE or some such. I don't know if that will ease your pain, though.
    Beth

  • XMP doesn't display proper info in Photoshop CS2 for Mac.

    Dear List members:
    I have just recently installed Creative Suite CS2 and begun to explore the functionality of XMP. After purchasing Bruce Fraser's book on Camera Raw for CS2, I downloaded Metalab (Pound Hill Software) and created my first custom XMP panel that can be seen under the file info in Photoshop when an image (digital photo) is open.
    The problem is that I noticed a few odd things and began to question myself if there is some kind of bug or a problem with my installation of CS2.
    1. The window that opens under the file info command has several categories of information on the left to be chosen from, in the following order:
    (1)Description, (2)Camera Data 1, (3)Camera Data 2, (4)Categories, (5)History, (6)IPTC Contact, (7)IPTC Content, (8)IPTC Image, (9)IPTC Status, (10)Adobe Stock Photos, (11)Origin, (12)Advanced
    The Camera Data 1 option when selected opens a panel in the file info window that seems to contain all the information it is supposed to contain. The Camera Data 2 panel, on the other hand, doesn't display any information at all. Although the fields are there, they are empty. The fields are:
    (1)Pixel Dimension X and Y, (2)Orientation, (3)Resolution X and Y, (4)Resolution Unit, (5)Compressed Bits per Pixel, (6)Color Space, (7)Light Source, (8)File Source.
    All these fields are empty but when looking at the same file under Bridge the information is there, displayed under the metadata menu.
    This is something I noticed "before" installing Metalab so I know it is not a compatibility issue generated by the installation of the software.
    After installing CS2 I noticed that CS1 remained installed in my system. The version I purchased of CS2 is the upgrade one. Since I have no use for CS1 as I am now totally converted to CS2, I would like to uninstall CS1. The following are some of the questions I have:
    1. How can I uninstall CS1 without causing any problems to my installation of CS1 ? Is there an uninstall utility with the software or will I have to uninstall the entire package manually ?
    2. My G5 came with only one internal 160 GB drive where I originally installed CS1. I then purchased another internal 400 GB HD and copied the original drive onto it. This week I am going to replace the original 160 GB drive with a second 400 GB drive so that I can do regular "mirror image" back-ups between the two drives. Shold I expect any problems as I remove the drive where I originally installed CS1 ? Since I used disk utility to "copy" the 160 GB drive onto the 400 GB drive, my understanding it that any Adobe software key or authorization was also transferred to the drive. Is this right ? In case it hasn't, how can I transfer this information so that after I remove the 160 GB drive I will not experience any problems when trying to run CS2 ?
    3. How can I fix the problem with the Camera Data 2 panel under the file info window and command ? I noticed that the folder that is supposed to hold the Custom File Info Panels (HD>Library>Application Support>Adobe>XMP>Custom File Info Panels) has files for CS1 and CS2. Could this be a problem ? There many more files with .dat extenson than there are with the .txt extension. Bruce Fraser specifically says that the ones with the .txt extension are the ones that hold the XMP templates for information related to the image files. The files I have in this folder with the .txt are:
    (1)Camera1_CS2.txt , (2)Camera1.txt , (3)Camera2_CS2.txt , (4)Camera2.txt , (5)Categories.txt , (6)History.txt , (7)IPTC_Contact.txt , (8)IPTC_Content.txt , (9)IPTC_Image.txt , (10)IPTC_Status.txt , (11)StockPhotoInfo.txt
    The only ones that have two separate files one each for CS1 ad CS2 are Camera 1 and Camera 2. Camera 2 seems to be the only that is now non-functional. What should I expect to happen if I were to manually uninstall the ones that relate to CS1 ? Could that cause any problems ?
    My apologies for the long post but I didn't really know how to make it shorter.

    The Photoshop and/or Bridge forums would be more likely places to get answers to your questions. This forum is inhabited more by programmer types interested in implementing the XMP specification in applications we write.
    I'd expect CS2 to ignore CS1 panels so I doubt that's the issue. Panels don't interfere with each other--they just offer different views of the data. In any case, move the extra panels to your desktop and see what happens.
    As far as I know, all you need to do on the Mac is drag the CS1 application folder to the trash to uninstall it.

  • Photo page doesn't display photos????

    my first attempt at updating my site in iWeb 09 and I'm stumped.
    I added new photos to my photo page - but the page comes up blank in my website.
    (I published to my local folder and then uploaded to my server with Fetch)
    Curiously, when I click the "visit" safari icon INSIDE of the iWeb app, I'm taken to a page that DOES display the photos... but the page has a slightly different url.
    The functioning page's url has: my domain/THE "LOCAL"NAME OF MY SITE/selected page.
    My old site url only contained my domain followed by the selected page of the site.
    Somehow iWeb 09 has altered the url????
    Any suggestions/thoughts?
    thanks in advance

    nevermind - it seems to working properly now?????

  • Yahoo home page doesn't display correctly. All my other sites are OK. Page style is set to "Basic Page Style. What else can be wrong?"

    Yahoo home page does not display properly, while all my other web pages do display correctly. I checked View, Page Style, and it is set to Basic Page Style. What else can be wrong?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • ITunes summary page doesn't show my device.

    Hi Everyone
    I have a Macbook Pro running Lion with teh latest version of itunes and al updates etc.
    The problem I have is when i use my account and connect a device i cant seem to see it on the summary tab within itunes.
    Therefore i cant manage my device or restore from backup.
    When i logon to the computer using a different account the summary and device appears... how can i fix this for my account.
    Many thanks
    Jamie

    Hi Mike thanks for getting back to me ..
    However this didnt fix my issue.
    Im actually missing the entire summary of my device from the main summary page...
    I hope the picture below explains my issue
    Thanks
    Jamie

  • IPhone doesn't display iPhone is activated after restore

    I restored my phone and also when updating it doesn't display iPhone is activated

    But does it work? Mine hasn't displayed "activated" for a while, but it still works after updating.

  • Book default page doesn't display

    I have a portal with several books with a few pages each. the books are tied to a single level menu across the top, the pages are all set to no navigation. The "Return to default page" is set to true and a default page is set.
    The problem is that after I initially load the book, if I navigate to another page in the book and then try to get back to the book (using an anchor tag and render:pageUrl or by navigating to another book and then back again) the default page never shows up again. I can get it if I access it directly with pageLabel=pagename, but pageLabel=book doesn't work.
    I have tried setting up pageChangeEvents in the handlepostback of the book, but to no avail. The default page just never shows up again.

    As I am sure that you know it is tough to dissect portals to send good examples... I do have some more information. I turned off Tree Optimization and it has had a partially positive impact. Now when you navigate between books via the single level menu the default page loads, albeit notably slower.
    Where it doesn't work is where my manual book links rendered in the children pages do not reload the default page for the parent book.
    Let me explain this a little: I have pages within books, each page is in two column layout with a menu on the left. The top menu item on the left is a link back to the parent book (which should display the default page). This link does not reload the default page, it remains on the current page, the url in the navigation bar clearly contains the book url.
    The urls for the single level menu and my custom book link appear to be identical, but one works, the other doesn't:
    <i>http://localhost:7001/v2portal/modine.portal?_nfpb=true&_pageLabel=modineNewsRoom</i>
    I have tried _nfto=false, but that hasn't worked either.
    It is almost like the portal isn't sending control up high enough on the tree to recognize what it really needs to do, which is re-render the book.

  • Page doesn't display correctly in Draft process

    Any page on our new site looks fine in Contribute CS 6.5 when browsing the site via Contribute or when editing the page in "Edit Page" mode; but when we send a page for review, the Publisher sees PHP errors and no page is displayed. The same PHP errors are seen if the Publisher returns the draft. If we publish the page, it looks fine. It seems like the display issue is only in this one specific mode of Contribute. Does anyone have any advice about why Contribute would display a page fine in Browse or Edit states, but not when browsing a Submitted or Returned Draft? Here's what the page looks like when I open it from the Draft Console:
    This happens on any page, from any Contribute Writer, to any Publisher.

    Sorry...turns out this was a relative path issue triggered by Contribute saving drafts to a temporary location that broke the path. Resolved by changing the PHP include_once call.

  • Blog Page doesn't display all entries

    I have built a site using Modern Frame template. I am using the Blog page to display member profiles. It appears the front blog page has reached it's page length limit. The oldest displayed post is not the oldest if you see what I mean. Please see http://www.dfgs.co.uk and click on the members page.
    If you go to the oldest entry (member), open their profile and click next, you will note there are further entries not displayed on the blog page. Most frustrating. Anyone any suggestions? or have I exceeded the blog page length.
    Thanks in advance for amy support.

    What I really meant to say is, in the Inspector, how do you extend the blog page to accept more than 50 entries? Help please......

  • Simple Menu Bar On Home Page Doesn't Display in IE 7

    Hello,
    I have a really simple xhtml site with a menu bar at the top of the page.  It looks great in firefox and works in most version of IE but it disappears in IE 7 and I have no idea how to fix it.  The site is staged at www.consurv.net/stage.
    Any insight would be greatly appreciated.
    Best Regards,
    - John

    Corel, I know you mean well, but your solution does not work.
    You keep posting this all over the place but can't you see it isn't helping people? Safe Mode is useless. I have no conflicts with add-ons, extensions or plugins. Those dozens of "places" files that you say must be deleted...that's utterly insane.
    Firefox has created a new browser that is buggy in a major league way and they must fix it. If not, I'm going to use another browser and I will uninstall Firefox.

  • ICloud's mail page doesn't display .mac & .me mail that Thunderbird captures

    Greetings:
    I recently discovered after weeks of experiments and combing my iCloud trash and junk folders that if your Thunderbird Server settings is set for imap.mail.me.com or imap.mail.mac.com instead of imap.mail.icloud.com that iCloud will let Thunderbird get your mail but that same mail  won't be listed or logged on your online iCloud mail display at all and visa versa! So the only copies of mail I have from senders to my computer with Thunderbird Server set on imap.mail.me.com or imap.mail.mac.com resides on one computer's Thunderbird mail folder instead of also in my iCloud mail folder. Thank God I never purged my Thunderbird folders!
    Now that I solved that mystery I have to find a way to copy that one-of-kind imap.mail.me/mac.com mail on one Thunderbird into Thunderbirds on other machines but that's a different issue. I'd like to know whether all that imap.mail.mac/me.com mail still resides on those Apple servers and can be retrieved or at least archived to me. This misdirected server  oversight issue must be rare or unknown to Apple because I received no alerts regarding this as a previous .Mac/.Me user for the iCloud conversion or since. I think it would be prudent for all .Mac users to review their Mail app's folders and their online iCloud one. I am going to keep Thunderbird in imap.mail.me.com and imap.mail.mac.com Server settings since at least the mail reaches me as before but still can't be plucked from iCloud in Thunderbird's imap.mail.icloud.com Server settings mode.
    Thank you for any assistance.
    J Greenidge

    It works just fine in Mail.app on my MBP, so it should work on the iPhone as well, shouldn't it?
    No. The iPhone's Mail client does not support .eml attachments, or .ics calendar attachments, or several other file types that desktop clients can handle.
    You can submit feedback to Apple: http://www.apple.com/feedback/iphone.html.

  • New York Times home page doesn't display correctly

    New York Times home appears without any formatting. All text, including links, and all objects (videos, photos, etc.) appear justified left, stacked individually. This means it takes five minutes just to scroll down the page to see the headlines. Have upgraded to Firefox 4, which fixed the problem until the next time the page reloaded. Cleared the cache, checked page style and zoom, all settings are normal and/or recommended. Do not have this problem with any other website or any other page of the NY Times. Only the home page.

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages

  • Iframe page doesn't display

    I have inserted code that works on another page of my site:
    <iframe src ="program/Directory/directory.html" width="590px" height="400px" frameborder="0" scrolling="yes">
      <p>Your browser does not support iframes.</p>
    </iframe>
    I inserted the same code, modified the path to a different page, and it does not work on the new page. Is there additional code that needs to be added?
    thanks

    You don't need an iframe for this.  To make a scrolling division or table cell, all you need is a CSS height value and the overflow property.
    CSS:
    #YourDivName {
    width: 150px;
    height: 300px; /**height in pixels**/
    overflow: auto;
    HTML:
    <div id="YourDivName">
    content goes here
    </div>
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

Maybe you are looking for