Cisco 5 with Exchange 2010 and Database Availability Groups

Hi,
Unity 5 was installed a long time. Recently installed with the latest ES88 to the system. The fact is we have Exchange 2007 (clustered) mailbox server in the network environment, and introduced the Exchange 2010 (with DAG activated).
So far we didn't do any "re-partnering" from the Exchange 2007 to Exchange 2010. The end users are working fine by leaving voice message and can retreive their voice without too much issue, no matter where the End Users account are located, Exchange 2007 or Exchange 2010.
But lately, there was some actions taken in the Exchange environment. Some Exchange 2010 mailstore databases in one of the Exchange 2010 server, with DAG has been activated.
In this case, we are now unable to leave any voice messages to the end usrs. All the voice messages are now being held in C:\CommServer\UnityMTA.
Want to ask, does Unity 5 and Exchange 2010 compatible with DAG? Also, is that my problem is caused by re-partnering server not taken place? If yes, which Exchange 2010 mailbox database server I should point to? Reason is, there will have 3 physical servers, and with several DB mailstore, if I select one of the physical server, and one of the D mailstore, will this be affected when the DAG is activated?
Thanks
Timothy

Hi Yancy,
If you're referring to integrating Microsoft Exchange 2010 with Cisco Unified Communications Manager (CUCM) 5.x for voicemail purposes, via a SIP Trunk, then you could certainly have a go at it (a Media Termination Point would be required and the codec would be G.711). However, I'm not aware of anyone having properly tested it with CUCM 5.x; given that it's not having software maintenance releases written for it anymore. CUCM 5.0 stopped having software maintenance releases written for it in June 2009, and CUCM 5.1 in February this year.
The following Tech Tip is likely to assist:
https://supportforums.cisco.com/docs/DOC-12544
Kind regards,
Craig

Similar Messages

Exchange Database Availability Group

Hi,Long time lurker here, i always find what i need on spice works whenever looking for help, however i couldn't find a clear answer to my question this time, hence my first post!
I am currently going through planning a secondary exchange server to be paired with our current exchange in a DAG fail over, Ive been reading through some guides and online help it doesn't seem too difficult.However, the guide i was looking at (http://exchangeserverpro.com/installing-an-exchange-server-2013-database-availability-group/) said you need to move the mailbox database your going to replicate from the default path, now as Ive only been at this company six months i didn't set up the exchange and it currently sits at the default path, and the company works around the clock so finding a reasonable time for downing exchange for this will be difficult.So...
This topic first appeared in the Spiceworks Community

Hi,Long time lurker here, i always find what i need on spice works whenever looking for help, however i couldn't find a clear answer to my question this time, hence my first post!
I am currently going through planning a secondary exchange server to be paired with our current exchange in a DAG fail over, Ive been reading through some guides and online help it doesn't seem too difficult.However, the guide i was looking at (http://exchangeserverpro.com/installing-an-exchange-server-2013-database-availability-group/) said you need to move the mailbox database your going to replicate from the default path, now as Ive only been at this company six months i didn't set up the exchange and it currently sits at the default path, and the company works around the clock so finding a reasonable time for downing exchange for this will be difficult.So...
This topic first appeared in the Spiceworks Community

Exchange email not syncing with Outlook 2010 and Z10

Hi all,
I've just set up my work email's to sync with my BB Z10. This all works fine and I'm getting the emails on my phone. But when I read an email from my phone, it does not get read in Outlook. When I delete an email on my phone, it does not get deleted in Outlook. Vice versa. If I read and delete emails in Outlook, they do not get read or deleted on my phone. This is rather frustrating as the whole point of syncing emails is to be able to have full control away from the office. I've got Delete on Handheld and Server on yet they are not deleting on Handheld and Server. These settings work fine for my personal accounts but just not on my Exchange account. Initially when I deleted a load of messages from my phone I got the following message 'Email messages will be removed from the BlackBerry Hub but will remain on the server'. Can I turn this option off? Also why is it coming up with this even though I have Delete on Handheld and Server on.
Thanks in advance,
Rajan

go to settings, accounts, choose the account in question, tap on advanced on bottom, do you show server address and port 443 below it and using SSL with PUSH on?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Limitations of SharePoint 2013 integration with Exchange 2010?

Customer using SharePoint 2013 and looking at whether its possible to integrate this with Exchange 2010 and which features would be available / limitations. Looking for a matrix similar to those found in the Good, Better, Best documents available for previous
versions. Nothing available on Recently Published content for SharePoint 2013 yet http://technet.microsoft.com/en-us/library/cc262043.aspx

I haven't seen a specific list, but the three features I've run into that only work with Exchange 2013 are eDiscovery in Exchange, Automatic Task Synchronization with Outlook and the Site Mailbox feature. There is a Legacy Task Synchronization mode
available that will work with Exchange 2010 if you turn off the Farm level feature controlling Exchange 2013 task synchronization. It lets users manually sync specific task lists with Outlook. But there is no task aggregation. I found this
whitepaper helpful for exploring the new features and how to turn them off when using Exchange 2010.
http://www.microsoft.com/en-us/download/details.aspx?id=38799
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Database Availability Group Missing on 2 Exchange Servers

I have a an existing Exchange 2007 setup and installed 2 Exchange 2013 servers that have the Mailbox and CAS role. When I go to the ECP menu and click on databases there is no option available to create the DAG.

I Don't think that the Exchange 2013 installation is successful. If it successful then it might have been a problem with RBAC Roles which were not delegated properly to the account you are using to logon to ECP.
Try below and check if you are able to create DAG.
1. Create a New User and make it a member of Organization Management, Enterprise admins, Domain Admins, Schema Admins,
Built-in Administrators, Group policy Creator Owners and run the command below on the powershell: Set-User NewUser -RemotePowershellEnabled:$True
2. Logoff and Login Back using the Newly create account and check if you are able to see the option to Create DAG.
IF you are not able to then Open Windows Powershell as administrator and run the commands below
Add-Pssnapin *Setup
Install-CannedRBACRoleAssignments -InvocationMode Install
Install-CannedRBACRoles
Install-CannedRBACRoleAssignmentsRAP
Install-CannedAddressLists
Lastly, i would also ask you to get the output of the command below:
Get-ManagementRoleAssignment -Role "Database Availability Groups" -RoleAssignee OriginalUserWhoDontHaveCreateDagOptiononECP
M.P.K ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your question. ~~ This
Information is provided is "AS IS" and confers NO Rights!!

Cisco Unity Connection Single inbox with Exchange 2010

I have a new installation of Unity Connection 8.6.2 using single inbox with an Exchange 2010 cluster frontended by a Netscaler load balancer.Functionality that does not work is when a new message comes into outlook and the message is read or deleted it does not update the status on the phone- IE turn off the MWI or if the message is deleted it is still a new message in Unity. If you click reset in the user unified message account, the status gets updated.
TAC says its a blocked port on Exchange TCP 7080 but that is open.

I followed this document :
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html
but when i try to integrate CUC with exchange 2010 , i didn't find is clear enough
do you have Step by Step more clear than that link becouse my lab very close to your case.
Regards

Exchange 2010: Remove high available mailbox database error

Hello everyone,
I have a two node DAG exchange 2010 and recently split one mailbox database into two databases.
Now when removing the original database I get the following error:
Please provide specific details.
The following was done thus far:
Deleted all softdeleted items
this is not the default mailbox database
Suspended the second mail server and removed it from mailbox, leaving now just one mail server attached to the mailbox database.
Help

Try to check mailbox import request is there or no by this command. Get-MailboxImportRequest. If you can see any requests listed. Remove it by this command Get-MailboxImportRequest | Remove-MailboxImportRequest.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Exchange 2010 and 2013 Monitoring with SCOM 2012

HI all,
I have exchange 2013 and 2010 in my environment , Iwant monitor both in SCOM 2012,
Can you all please tell can i implement 2013 monitorinng first later can i go to 2010 Monitoring, Please advise in that supported or do i need to go with exchange 2010 monitoring first

There are no dependencies on the 2010 MP so you should be good to go, see the following:

Problem with Exchange 2010, Q10 and attachment

Q10 & Exchange 2010; unable to download and forward attachment
Hi all,
i have a problem with Q10 phone, sync with Exchange 2010 with activesync (not BES) all seem ok but unable to download attach.
When press "download" didnt start. Unable also to forward same message but i think is a chainde problem.
Same message from desktop (outlook) or OWA is ok and attach downloadable.
This is the only Q10 present in company for test so i cannot compare to others BB.
All other users connected to the exchaneg server have iphone & ipad no issue result. Email service seem ok also for desktop.
Firmware was updateted about 10 day ago.
Any idea for me?
Thanks

Hi marcottt,
Could you provide more detail please so I can better assist?
Do you have this issue with all attachment types? If not, what type of attachment are you having this issue with and what size is the attachment?
What happens when you try to forward the message? Is any error received?
Does removing and re-adding the email account make any difference?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Real-world experience with Exchange 2010 SP3 RU5+ and Powershell 4?

The support-ability matrix for Exchange (http://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx) says Exchange
2010 SP3 RU5+ and Powershell 4 are compatible. But, there is very little actual discussion about how well that works.
I use Powershell extensively for mission critical and somewhat complex processes, with Exchange 2010 on 2008 R2 and AD access/reads/updates.
Can I get a summary of the caveats and benefits from someone who has actually done this in a
real-world/production scenario (more than one server, managing from a separate non-Exchange server), and who has scripting experience with this configuration?
Also, how has this affected EMC operations?
As always thank you in advance!

I believe the matrix states that its supported to install Exchange into an environment where __ version of WMF is present. Exchange 2010, launched from a Win 2012 server, reports version 2.0 when you call $host. For example, calling the ActiveDirectory
module from EMS on an Win 2012 server (ps 3.0) fails.
I'll double check the extent of this scenario and get back to you.
Mike Crowley | MVP
My Blog --
Planet Technologies

Z10 with Exchange 2010 Activesync missing incoming messages

Z10 with Exchange 2010 Activesync won't download all messages, missing messages include messages sent to internal Exchange distribution groups and bulk email (I could live with this one, lol) Activesync works fine on iOS and android devices (100+ devices in my organization with no issues). Tried enabling secure IMAP on the exchange server, and with this config the messages are delivered, but the body of the same messages missing with the activesync setup have a [No body found] in the message body and are otherwise blank. Tried running the EAVT tool and it returns "Nothing was found for provided credentials" . My personal Gmail account works fine on the phone, tried loading the 10.1 Blackberry OS and had the same problem. Tried setting up the account multiple times, used both autodiscover and manual setup to no avail. Any thoughts? Thanks in advance for your help!

Hey cyberayk,
Welcome to the BlackBerry® Support Community Forums.
Do these email messages get redirected to a different folder on the Exchange Server? If yes, On the BlackBerry smartphone go to Settings > Accounts> Select the account> Edit Folder Settings, are these folders selected?
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Unity 5.0(1) with Exchange 2010

According to the following link, Unity 5.0 supports Exchange 2010 as the partner Exchange server.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/7x/using_exch2010/usingex2010withcu7x5x.html#wp47622
However, when I get to step 14 of this document (installing ExchangeMapiCdo.exe) I get an error saying it can't be installed with this version of Exchange.
I was just wondering if anyone elsel had tried to run Exchange 2010 with Unity 5.0 and if so, how you were able to get it to work. I followed all the steps in this document and everything seemed to be working until this step.

3 things:
1) You should get a TAC case going, if you haven't already.
2) For Unity 5x, ES83 was replaced by ES85 (which was yanked off the download site almost like a ghost in the night) and now there is ES86. You may want to read up on what is fixed here in this ES.
3) I think you may have your service account mailboxes homed in the wrong place. If you note there, is a section for where to put the mailbox for the UnityMsgStoreSvc. Excerpts I'm looking at are:
Adding One or More Exchange 2010 Servers to an Existing Cisco Unity 7.0 and/or 5.0 Installation
Step 14 On the Cisco Unity server, install ExchangeMapiCdo.exe, which you downloaded in Step 4.
Step 15 On the Cisco Unity server, install the version of the Permissions wizard that you downloaded in Step 2.
Step 16 Run the Permissions wizard, and select the Exchange 2010 message stores in which mailboxes for Cisco Unity subscribers will be homed.
Step 17 At the end of the Permissions wizard, on the You Have Completed the Cisco Unity Permissions Wizard page, click Granting Microsoft Exchange Administrator Rights, and do the procedure in the Help file to add the installation and directory services accounts to the Exchange 2010 Organization Management role group.
Step 18 Restart the Cisco Unity server.
Step 19 Move or create a mailbox for the Cisco Unity message store services account (typically UnityMsgStoreSvc), as applicable:
Exchange 2003 or Exchange 2007
mailbox already exists
Move the mailbox for the account to Exchange 2010.
No mailbox
Create a mailbox for the account in Exchange 2010.
Step 20 Remove the Exchange 2010 RPC limit for the message store services account by creating and applying a new mailbox policy to the message store services account:
a. Open an Exchange 2010 Management Shell window.
b. Create a new policy with unlimited RPC connections, for example:
new-throttlingpolicy -name "Unity Exchange 2010 Policy" -RCAMaxConcurrency $null
c. Apply the new policy to the message store services account, for example:
set-mailbox -identity "UnityMsgStoreSvc" -throttlingpolicy "Unity Exchange 2010 Policy"
d. Confirm that the mailbox is using the new policy, for example:
get-mailbox -identity "UnityMsgStoreSvc" | fl | findstr "Throttling Policy"
e. If you have more than one Cisco Unity server: Repeat Step c and Step d for every message store services account in the forest.
We recommend that you apply the policy to all message store service accounts, even the accounts for Cisco Unity servers for which you do not currently intend to home subscriber mailboxes in Exchange 2010 message stores. Applying the policy does not affect Cisco Unity performance, and it ensures that you will not encounter problems if you later move mailboxes to an Exchange 2010 server.
f. On each Exchange 2010 server with the CAS role, restart the Microsoft Exchange RPC Client Access service.
Personally, I would make sure you have all of these items down to a tee because, IMO, there is likely something that went astray in the install/backout/fix process.
Hailely

SQL 2012 Database Availability Group - Force Automatic Failover

Hi All,
I'd appreciate some help in understanding the following scenario in my test environment.
I have created a DAG with 2 replica servers (both of which are HyperV VM's running W2012 Std).
From a client PC in my test lab, I can connect to the virtual listener of my DAG and confirm via the "select @@servername" command that I am connecting to the primary replica server.
Using the Failover Wizard, I can easily move to primary instance between my 2 nodes and the command above confirms that the primary replica server has changed. So far so good.
What I wanted to test, was what would happen to my DAG in the event of a complete loss of power to the server that was acting as the primary replica server. At first, I thought I would stop the SQL Server service on the primary server, but this did not result
in my DAG failing over to the secondary replica. I have found out that the only way I can do this is by effectively shutting down the primary server in a controlled manner.
Is there any reason why either stopping the SQL Server service on the primary replica, or indeed forcing a power off of the primary replica does not result in the DAG failing over to the secondary replica?
Thanks,
Bob

Hi,
I would verify if Database Availability Group means AlwaysOn Availability Group.
How did you set the FailureConditionLevel?
Whether the diagnostic data and health information returned by sp_server_diagnostics warrants an automatic failover depends on the failure-condition level of the availability group. The failure-condition level specifies what failure conditions
trigger an automatic failover. There are five failure-condition levels, which range from the least restrictive (level one) to the most restrictive (level five). For details about failure-conditions level, see:
http://msdn.microsoft.com/en-us/library/hh710061.aspx#FClevel
There are two useful articles may be helpful:
SQL 2012 AlwaysOn Availability groups Automatic Failover doesn’t occur or does it – A look at the logs
http://blogs.msdn.com/b/sql_pfe_blog/archive/2013/04/08/sql-2012-alwayson-availability-groups-automatic-failover-doesn-t-occur-or-does-it-a-look-at-the-logs.aspx
SQL Server 2012 AlwaysOn – Part 7 – Details behind an AlwaysOn Availability Group
http://blogs.msdn.com/b/saponsqlserver/archive/2012/04/24/sql-server-2012-alwayson-part-7-details-behind-an-alwayson-availability-group.aspx
Thanks.
Tracy Cai
TechNet Community Support
Hi,
Thanks for the reply.
It's an AlwaysOn Availability Group.
In my test lab, I have changed the quorum configuration to a file share witness and that has allowed an automatic failover when I turn the primary replica server off (rather than power it off).
I'll take a look at the links you provided.
Regards,
Bob

Problem with Exchange 2010 scripts after installing PowerShell 4.0

Hi
After installing new updates for MS Exchange 2010 and PowerShell 4.0 I've got problems with PS scripts using buil-in
exchange commands.
I wrote interactive script for searching e-mails. Here is a pice of code where I get error after installing PS v4.
$SearchContent=Read-Host "Write sentence to find"
Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Discovery Search Mailbox" -TargetFolder "Inner box" -LogOnly -Loglevel Full | Out-Null
After installing PowerShell 4.0 I get that bug and report in TargetMailbox is not genereated.
The property keyword isn't supported.
At C:\Administration\Scripts\T-SearchMail.ps1:122 char:1
+ Get-Mailbox | Search-Mailbox -SearchQuery "$SearchContent" -TargetMailbox "Disco ...
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo          : InvalidArgument: (:) [], ParserException
    + FullyQualifiedErrorId : 35E6C841
Using PowerShell 2.0 everything was ok.
How to solve this problem?
Tomasz
Kind Regards Tomasz

But http://blogs.msdn.com/b/powershell/archive/2013/10/25/windows-management-framework-4-0-is-now-available.aspx is dated
October 2013, while the current Windows Management Framework 4.0 System Requirements section states:
Servers that are running the following applications can now run WMF 4.0. The versions listed are the minimum releases required to run WMF 4.0.
Microsoft Exchange Server 2013 Service Pack 1
Microsoft Exchange Server 2010 SP3 with Update Rollup 5
Since
Update Rollup 5 For Exchange 2010 SP3 (KB2917508) was published Febrary 2014, shouldn't Exchange 2010 now be compatible with PowerShell 4.0?

Exchange 2013 co-existence with Exchange 2010 proxying issue.

Hello,
I am testing Exchange 2010 and Exchange 2013 co-existence in my test lab at the moment, with
a view to migrating our production environment to 2013 later in the year.
The lab is setup, and the problem I'm having is that internal Outlook clients cannot open
their respective mailboxes once the 2013 CAS server is introduced into the mix.
The
setup is listed below:
EXCHANGE 2010 Servers
TESTLABEXCH01 - CAS,HT,MBX - Exchange 2010 SP3
TESTLABEXCH02 - CAS,HT,MBX - Exchange 2010 SP3
Both servers are part of a CAS Array - casarray01.testlab.local
Both servers are part of a DAG - DAG01.testlab.local
RpcClientAccessServer on all 2010 databases set to casarray01.testlab.local
The A record for casarray01.testlab.local points to the IP of the VIP of a load balancer.
The loadbalancer serves
the following ports: 25,80,443,143,993,110,995,135,60200,60201
OutlookAnywhere is enabled on both servers:
ClientAuthenticationMethod : Ntlm
IISAuthenticationMethods   : {Basic, Ntlm}
Internal and external mail flow works without issue before the 2013 server is introduced.
Internal and external client access works without issue before the 2013 server is introduced.
Part Two to follow.....
Matt

EXCHANGE 2013 Servers :
TESTLABEXCH03 - CAS,MBX - Exchange 2013 SP1
OutlookAnywhere is enabled on the server:
ClientAuthenticationMethod : Ntlm
IISAuthenticationMethods   : {Basic, Ntlm}
RpcClientAccessServer on all 2013 databases set to casarray01.testlab.local
(This an inherited setting I assume from the pre-existing 2010 organization)
Split DNS is in place and all internal/external URL's point to either:
autidiscover.external.com
mail.external.com
The A record for the mail.external.com points to the IP of the load balancer VIP
The CNAME record for autodiscover.external.com points to mail.external.com
When the TESTLABEXCH03 is added to the load balancer config,
and given highest priority this is when the Outlook clients stop working.
Any existing profiles in Outlook 2010/Outlook 2013 can no be opened as there is a persistent
credentials prompt.
Upon trying to create a new profile, the process errors when reaching the "Log onto server"
stage and again prompts for credentials.
Running the test-outlookconnectivity cmdlet from
either of the 2010 servers produces the following results.
[PS] C:\Windows\system32>Test-OutlookConnectivity -Protocol:http
ClientAccessServer   ServiceEndpoint
Scenario                            Result Latency
TESTLABEXCH02 autodiscover.external.com    Autodiscover:
Web service request. Success 343.20
TESTLABEXCH02 casarray01.testlab.local       RpcProxy::VerifyRpcProxy.
Success    0.00
TESTLABEXCH02 casarray01.testlab.local         RFRI::GetReferral.
Failure   -1.00
TESTLABEXCH02 casarray01.testlab.local        NSPI::GetProfileDetails.
Failure   -1.00
TESTLABEXCH02 casarray01.testlab.local
Mailbox::Connect.                   Failure   -1.00
TESTLABEXCH02 casarray01.testlab.local
Mailbox::Logon.                     Skipped   -1.00
If remove the 2013 CAS server from the loadbalancer config and
all connections go directly to the 2010 servers again, all of the above tests pass and Outlook connectivity is also restored.
IIS has been reset on all 3 servers incidentally, following any changes made whilst troubleshooting.
I'm struggling to see what I'm missing here, if anyone can assist in troubleshooting this
matter further, or point out any errors in my setup it would be greatly appreciated.
Regards
Matt
Matt

Cisco 5 with Exchange 2010 and Database Availability Groups

Similar Messages

Maybe you are looking for