Cisco 501 Licensing

Hey, I'm sure this is an old topic somewhere, but i've had some trouble finding an answer. I recently purchased a referb 501 PIX and was wondering if there was a way I could get a 10-50 user license. i know the EOL has passed, but i was wondering if anyone knew a way I could get one. I'm pretty sure i'll have as much as 15 users on his device. I mean if I use a router beneath it using NAT could i bipass that 10 user restriction (probs not just thought i'd ask.)
Is there a place that still sells these licenses?

Hi David,
To purchase the license for your PIX, please refer the below link:
www.cisco.com/go/license
This will require to have a PAK which i doubt you will have. Otherwise, if you have a contract you can open up a case with TAC licensing or call up cisco support for enquiries on that.
For details on how the user count is calculated, please refer the below discussion:
https://supportforums.cisco.com/message/3187670#3187670
Hope this helps!!
Cheers,
Prapanch

Similar Messages

Cisco 501 - 50 User license?

Can someone please advise how Cisco determines the 50 user license limit.
A company I do business with has a Cisco 501 which is used ONLY for remote vpn (Windows XP - using PPTP) users to connect to internal hosts.
Internal users are routed to the internet via a PFsense firewall.
They have 25 remote users nationally & internationally but they have a problem getting any more than 12-16 remote users connected concurrently.
If there are multiple internal hosts being accessed by the remote users, how are the licenses counted i.e. is it 50 x unique source ip addresses or is it
based on session limits in the translation (xlate) table.
I have done a bit of reading and have read differing views so am a bit confused.
I have been asked to help troubleshoot this problem & have asked for details of the Cisco 501 config, error messages, IOS etc...BUT Im told that everything works fine EXCEPT that they hit a limit of approx 12-16 remote users connected concurrently so I was wondering if this was possibly a licensing problem?
thanks, Peter

PIX version is 6.3(5)
Remote users are radius authenticated...
Another question this probably leads to is how many simultaneous VPN peers will a Cisco 501 support with a 10 / 50 User License.
e.g. Maximum number of simultaneous site-to-site or remote access IKE Security Association (SAs) supported...

Cisco Enterprise License Manager

Is Cisco Enterprise License Manager the samething as Cisco License Manager? I just want to make sure I am downloading the correct thing to work with CUCM 9.0. This is the only thing I was able to find in the Support downloads when logged in with my CCO:
Cisco License Manager 3.2.3 Client and Server Package (Windows)

And thus, same HW requirements as CUCM if you want to do a standalone install.
Otherwise, just use the one that will get installed with CUCM or CUC.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Cisco BE6000 Licensing

Dear all,
I have a question concerning Cisco BE6000 licensing. I'ts clear that MD server support 1000 users and 1200 devices.
In this case, Can I add additional phones from UPM or CUCM without being associated to a user ? Means,that I can have 200 additional phones without users and 1000 users associated to a phone.
Can I add a phone directly from CUCM and not from UPM ? Does UPN updated directly its users and phone directory from CUCM ?
Kindly reply, it's an urgent request
Regards,

BE6000 licensing is based on licensing users and unassociated devices. An unassociated phone still consumes the "User Connect License" that is required for that type of phone. You are correct in saying that the MD server does support up to 1200 devices, so as long as you are licensing and deploying no more than 1,000 users (think total and configured licenses/users) and 1,200 devices... Then you are in good shape.
I presume that you are using Cisco Prime Collaboration Provisioning (PCP) instead of the older UPM. With CPC, you can add phones and users into UCM and they will be "synced" over to CPC at the next configured sync schedule. No problem.
It is still a good idea, from a change management perspective, to add/move/change user services in CPC. It will keep track of everything that has been done to/for a user.

Cisco ISE licensing...

Hi,
seeking help to reduce our ISE licensing cost, actually we are out budget and we planning to order ISE licenses less than what we required, and looking for efficiently using the same, is there any way, i mean if we reduce "user idle timeout" is it reduce our license consumption?
any kind help appreciated...
thank you,

License Count
A Cisco ISE user consumes a license during an active session. Once the sessions has ended, ISE releases the license for reuse by another user.
The Cisco ISE license is counted as follows:
A Base, Plus, or Advanced license is consumed based on the feature that is used.
An endpoint with multiple network connections can consume more than one license per MAC address. For example, a laptop connected to wired and also to wireless at the same time. Licenses for VPN connections are based on the IP address.
Licenses are counted against concurrent, active sessions. An active session is one for which a RADIUS Accounting Start is received but RADIUS Accounting Stop has not yet been received.

Cisco/go/license DOWN?

Hi I am trying to access the licensing page to obtain license from my PAK key urgently. It says internal server error when I access www.cisco/go/license
Please advise
Sent from Cisco Technical Support iPhone App

Hi Not too sure if your orgnial issue was a typo however as Rob indicates http://cisco.com/go/license redirects to https://tools.cisco.com/SWIFT/Licensing/PrivateRegistrationServlet.
Cheers
Mario

Not showing dashboard in cisco Enterprise License Manger

Dear All,
i have install CUCM 9.1 in UCS BE6000K
while installation i select only CUCM and installtion done
but when i access the CUCM after entering the ip address in the brower it's showing CUCM and Enterprise License Manger
CUCM is working fine i configured few parameter
issue when i click on Enterprise LIcense Manger i log in it's showing noting is there in the GUI page i can see only on top of the page left side corner Enterprise license manger and in right side top of the corner log in , about etc.
why is not showing this parameter like monitoring, dashboard, license usage,license management, inventory,administrion in the Enterprise License Manger

Hi Lalesh,
there is a bug
https://supportforums.cisco.com/thread/2252230
ELM GUI not displaying on Chrome 29+ and Firefox 25
CSCul30396
Description
Symptom:
ELM GUI does not display properly, only the page header is visible.
Conditions:
User is trying to access ELM using the latest version of Chrome or Firefox.
Workaround:
The ELM GUI displays properly on both Internet Explorer 9 and 10, as well as Safari (Mac and Windows).
regds,
aman

Cisco prime license confusion

Hi I have installed cisco prime 1.2 to manage router, AP, controller, switch and ISE
and I am confused wiht license
I have this 3 item
1. L-PILMS42-100
2. L-PINCSW11-100
3. L-PINCS11-100
I have already genereted and added item 3 on prime and it work
I gererated item 1 but I cannont add it on cisco prime, he dont reconnize the file
I am unnable to add my ISE on cisco prime
Do I need special licence fro ISE
Do I need to add the 3 license
Please advise

Do you want to use Prime Infrastructure or Prime LMS to manage the Catalyst 2960 switches? In either case it is possible - simply add the devices manually or discover them. Procedure for PI is here. Procedure for LMS is here.
The ISE appliances are not manageable in any but the most basic sense as they are not a supported Cisco device (for either Prime Infrastructure or Prime LMS) and will be seen the same as a generic non-Cisco deivce. i.e., only SNMP polling and traps (and, with LMS, potentially syslog data).

Cisco ISE license file

I would like to backup the license file to apply for a fresh installation on the same hardware (3355). Is that possible? I tried resetting the configuration from the CLI and the license was excluded, it was necessary to do a restore.

By re-hosting you can do:
please check the link https://supportforums.cisco.com/discussion/11728041/ise-license

Cisco Prime Licensing

Hello,
We are trying to design a wireless solutions in our infrastructure and we would like to implement WCS as well.
As I have seen, this has changed to Cisco Prime.
However in my understanding, Cisco Prime is a mixture of LMS, CSM, WCS, QPM, NAM and a lot more.
What is the minimum license we need to obtain to get the WCS flavor of Prime?
Is there a wireless only with ISE integration license file?
Regards,
Nicos

The Prime Infrastructure offering that most closely maps to old WCS/NCS capabilities is achieved with Base plus Lifecycle license.
Please see the Ordering and Licensing Guide for more details.

Cisco wlc license evaluation

I have a question
I have a wlc 5508 with license base to a capacity 100 AP. I have already registered 65 AP, and now I need to register in to wlc 57 AP more.
I would like to install a license of evaluation by 30 days. After that i'm going to purchase a new license to support all my APs.
Please could you tell me how many AP adder the capacity in the WLC the license of evaluation?
The license of evaluation are base or ap-count?
Regards
Ivan.

The controllers come with a 60 day license. Here is a link explaining licensing on the 5508
http://www.cisco.com/image/gif/paws/112926/5508-wlc-license.pdf
"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

Cisco 7942G license

Which phone license and call manager license is required when we are quoting cisco 7942G with cisco call manager 4.3.
Thanks & Regards

Hi SJ,
It was a just paper license .
rgeds,
aman

Need help on cisco CUCM license issue

Hi Team,
I am using 9.0 version CUCM . This machine i have cloned from some other CUCM .So after logging into to CUCM web admin i am getting an error like The system is operating with an insufficient number of licenses. Configure additional licenses in your Enterprise License Manager in order to restore the ability to provision users and devices. So i tried to login to ELM Manager for applying license .But ELM is giving an error like invalid username and password. I am using the same username and password which i used to login into cucm web admin .
So can some one please help on this issue.
Thanks,
Sasikumar.

Try this,
Unknown username and password for Enterprise License Manager login
Description
I do not know the username and password of the system when it was originally installed, so I cannot log into Enterprise License Manager.
Resolution
Log into the platform CLI with the OS administration credentials and use the license management list users command to view the username to use for signing into the Enterprise License Manager application. If you are not sure what the password is for this username, you can use the license management change user password command to change this password.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/elmuserguide/9_0_1/CUCM_BK_E596FD72_00_enterprise-license-manager-user-90_chapter_0101.html#CUCM_RF_I970430F_00
HTH
Manish

CIsco IPS License Information

Hi,
If i am buying Cisco IPS with three year warranty then the license file i get for the sensor is for lifetime or for three years ?
I have heard that the IPS will continue to receive updates even after 3 years and is a lifetime license
Is this correct ?

Cisco IPS has both the license (right to use) component and the software subscription (updates to signatures and engine from Cisco).
The subscription is based on a fixed term (1 year, 3 year etc.) and will not continue once the term has expired.
You can use the system (with older signatures etc.) indefinitely.

Cisco security license cost

Hi, I'm a network administrator and I wanted to get the security license price for our cisco1941K9. How could I have the cost ?
Cdlt,
GKF

you would need to contact your local Cisco partner for this information or perhaps contact an Online partner. Follow the links on the following page for more information and ordering.
http://www.cisco.com/web/ordering/or13/order_customer_help_high_level_listing.html
Please remember to select a correct answer and rate

Cisco 501 Licensing

Similar Messages

Maybe you are looking for