Cisco 504G PC port shuts down periodically

I have a customer with a Cisco 504g that the PC port periodically stops working. Usually rebooting the phone fixes the issue, but today it doesn't seem to be the case. The phone is running Software Version: 7.5.3. If he plugs his computer into any other phone or wall outlet he gets internet just fine. I have found a few articles that state they are having the same issue, but no for sure fix.
I am going to change out the customers phone with another 504g with 7.5.3 running on it as a quick fix.
I have had this issue a number of times with other customers and I was wondering if you had found a fix for the PC port issue. It is a hassle to have to reboot the phone every time this happens.

At the location that I am dealing with no I have a Cisco WS-C3560-24PS.
I looked into the Macro and this device won't let me disable Macro Auto. He is what I get when I do a show on the Macro Auto Device. 
sh macro auto device
Device:lightweight-ap
Default Macro:CISCO_LWAP_AUTO_SMARTPORT
Current Macro:CISCO_LWAP_AUTO_SMARTPORT
Configurable Parameters:ACCESS_VLAN
Defaults Parameters:ACCESS_VLAN=1
Current Parameters:ACCESS_VLAN=1
Device:access-point
Default Macro:CISCO_AP_AUTO_SMARTPORT
Current Macro:CISCO_AP_AUTO_SMARTPORT
Configurable Parameters:NATIVE_VLAN
Defaults Parameters:NATIVE_VLAN=1
Current Parameters:NATIVE_VLAN=1
Device:phone
Default Macro:CISCO_PHONE_AUTO_SMARTPORT
Current Macro:CISCO_PHONE_AUTO_SMARTPORT
Configurable Parameters:ACCESS_VLAN VOICE_VLAN
Defaults Parameters:ACCESS_VLAN=1 VOICE_VLAN=2
Current Parameters:ACCESS_VLAN=1 VOICE_VLAN=2
Device:router
Default Macro:CISCO_ROUTER_AUTO_SMARTPORT
Current Macro:CISCO_ROUTER_AUTO_SMARTPORT
Configurable Parameters:NATIVE_VLAN
Defaults Parameters:NATIVE_VLAN=1
Current Parameters:NATIVE_VLAN=1
Device:switch
Default Macro:CISCO_SWITCH_AUTO_SMARTPORT
Current Macro:CISCO_SWITCH_AUTO_SMARTPORT
Configurable Parameters:NATIVE_VLAN
Defaults Parameters:NATIVE_VLAN=1
Current Parameters:NATIVE_VLAN=1
Device:ip-camera
Default Macro:CISCO_IP_CAMERA_AUTO_SMARTPORT
Current Macro:CISCO_IP_CAMERA_AUTO_SMARTPORT
Configurable Parameters:ACCESS_VLAN
Defaults Parameters:ACCESS_VLAN=1
Current Parameters:ACCESS_VLAN=1
Device:media-player
Default Macro:CISCO_DMP_AUTO_SMARTPORT
Current Macro:CISCO_DMP_AUTO_SMARTPORT
Configurable Parameters:ACCESS_VLAN
Defaults Parameters:ACCESS_VLAN=1
Current Parameters:ACCESS_VLAN=1

Similar Messages

  • Lighting bolt port shuts down macbook pro

    lighting bolt port shuts down macbook pro once the cable is pugged in. What is the cause of this problem

    Hi reginaldt,
    If your Mac unexpectedly turns off when you plug in a cable (unclear if you are describing a USB Lightning cable or a Thunderbolt cable) and you have checked to make sure there is no debris in either the cable jack or port, you may want to try resetting the PRAM and SMC:
    Apple Support: About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    If the issue persists, you may find the troubleshooting steps in the following article helpful:
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
    http://support.apple.com/kb/TS4636
    Regards,
    - Brenden

  • K9N Platinum (not SLI) Ethernet/LAN ports shut down

    Not sure if this has been up before but i could not find this exact problem. I have the K9N Platinum with am AMD 64x 4200+ CPU and OCZ 1GB x2 mem. My build and install of XP went without incident. My problem is that when I start to download anything of size, the LAN shut down. It will say "cable unplugged". If I switch to the second port, it will be good for a while, then the same thing. The only fix is to reboot. I am connected through a switch. I loaded the latest drivers (nVidia) from the monitor software. I found a different set on the NVidia web site and installed, but now it will not pick up DHCP. It will work if I hard code the IP. I read that it should be using Realtek drivers, not Nvidia. Please help!!! I opened a case with support but they have not answered yet.

    That is a start on Specs. You can look at anyone's signatuires here to see what is most commonly looked for in specs. Your are missing the PSU specs.
    However one of the first things to try is to go into Bios and set optimized defaults. Then you will need to make sure nothing else in Bios has changed as setting Optimized defaults usually changes things quite a bit.
    Then make sure that your using the drivers that came with the board including the NVidia and Network drivers.
    You may have to enter Device manager and remove the Network Driver and let it restart.
    You did answer one question many folks would have with the specs you gave about memory. The memory you have listed should be fine.

  • Macbook pro shuts down periodically intermittently

    My macbook pro (~2010) shuts down intermittently. The whole thing just shuts off. I find that it seems to happen more often when Pages is running but I'm not entirely sure of the correlation.
    Here is the error report that appears when it starts back up. Can anyone interpret it for me?
    Anonymous UUID:       D71E3AE2-9CD2-47DF-8D41-268B57CFB3BB
    Thu Apr 17 09:38:25 2014
    panic(cpu 2 caller 0xffffff7f85fadfb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff80fc11e000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.35/src/Apple MuxControl/kext/GPUPanic.cpp:127
    Backtrace (CPU 2), Frame : Return Address
    0xffffff80f3feb6b0 : 0xffffff8003c22fa9
    0xffffff80f3feb730 : 0xffffff7f85fadfb0
    0xffffff80f3feb800 : 0xffffff7f84622eab
    0xffffff80f3feb8c0 : 0xffffff7f846ec49a
    0xffffff80f3feb900 : 0xffffff7f846ec50a
    0xffffff80f3feb970 : 0xffffff7f8496b056
    0xffffff80f3febaa0 : 0xffffff7f8470fb39
    0xffffff80f3febac0 : 0xffffff7f846298fd
    0xffffff80f3febb70 : 0xffffff7f84627408
    0xffffff80f3febd70 : 0xffffff7f846284a8
    0xffffff80f3febe50 : 0xffffff7f845d526e
    0xffffff80f3febeb0 : 0xffffff7f85f8066c
    0xffffff80f3febf00 : 0xffffff7f85f7f55e
    0xffffff80f3febf20 : 0xffffff8003c4a23a
    0xffffff80f3febfb0 : 0xffffff8003cd6ff7
          Kernel Extensions in backtrace:
             com.apple.driver.AppleMuxControl(3.4.35)[1BFF66C1-65E4-3BB3-9DEE-B61C3137019B]@ 0xffffff7f85fa0000->0xffffff7f85fb2fff
                dependency: com.apple.driver.AppleGraphicsControl(3.4.35)[09897896-ACBD-36B5-B1D4-0CCC4000E 3B3]@0xffffff7f85f98000
                dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f84528000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f842bb000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f84580000
                dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7f85f9b000
             com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f845d3000->0xffffff7f8483bfff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f842bb000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f845c3000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f84580000
             com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56 A3A4AC]@0xffffff7f84846000->0xffffff7f84aeffff
                dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f845d3000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f842bb000
             com.apple.driver.AGPM(100.14.15)[BD884E30-94CF-3D5B-9A31-6C2F694CD5C4]@0xffffff 7f85f7e000->0xffffff7f85f8ffff
                dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f842bb000
                dependency: com.apple.driver.IOPlatformPluginFamily(5.7.0d10)[E9B6DC11-10DB-31D7-885C-886E1 62FA857]@0xffffff7f85012000
                dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f845c3000
                dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f84580000
                dependency: com.apple.AppleGraphicsDeviceControl(3.4.35)[E4C033B8-08F5-34D3-8720-C105D48F0B C4]@0xffffff7f85f78000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13C64
    Kernel version:
    Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
    Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
    Kernel slide:     0x0000000003a00000
    Kernel text base: 0xffffff8003c00000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 4241536228376
    last loaded kext at 1906796877825: com.apple.filesystems.afpfs          11.1 (addr 0xffffff7f8612d000, size 348160)
    last unloaded kext at 376438038175: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f860c3000, size 57344)
    loaded kexts:
    com.viscosityvpn.Viscosity.tun          1.0
    com.viscosityvpn.Viscosity.tap          1.0
    com.parallels.virtualsound          1.0 18
    com.globaldelight.driver.BoomDevice          1.1
    com.apple.filesystems.afpfs          11.1
    com.apple.nke.asp-tcp          8.0.1
    com.apple.filesystems.smbfs          2.0.1
    com.apple.filesystems.exfat          1.4
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AGPM          100.14.15
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.iokit.IOBluetoothSerialManager          4.2.3f10
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleMikeyDriver          2.6.0f1
    com.apple.driver.AppleHDA          2.6.0f1
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.GeForceTesla          8.2.4
    com.apple.driver.AppleIntelHDGraphics          8.2.4
    com.apple.driver.AppleLPC          1.7.0
    com.apple.driver.AppleIntelHDGraphicsFB          8.2.4
    com.apple.driver.AppleSMCLMU          2.0.4d1
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.SMCMotionSensor          3.0.4d1
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.3f10
    com.apple.driver.AppleMuxControl          3.4.35
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AudioAUUC          1.60
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleUSBTCButtons          240.2
    com.apple.driver.AppleUSBCardReader          3.4.1
    com.apple.driver.AppleUSBTCKeyboard          240.2
    com.apple.driver.AppleIRController          325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.XsanFilter          404
    com.apple.iokit.SCSITaskUserClient          3.6.6
    com.apple.iokit.IOAHCIBlockStorage          2.5.1
    com.apple.driver.AppleUSBHub          666.4.0
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AirPort.Brcm4331          700.20.22
    com.apple.driver.AppleAHCIPort          3.0.0
    com.apple.iokit.AppleBCM5701Ethernet          3.8.1b2
    com.apple.driver.AppleUSBEHCI          660.4.0
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.1
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.security.SecureRemotePassword          1.0
    com.apple.AppleGraphicsDeviceControl          3.4.35
    com.apple.driver.AppleBluetoothHIDKeyboard          170.15
    com.apple.driver.AppleHIDKeyboard          170.15
    com.apple.kext.triggers          1.0
    com.apple.driver.IOBluetoothHIDDriver          4.2.3f10
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.DspFuncLib          2.6.0f1
    com.apple.vecLib.kext          1.0.0
    com.apple.nvidia.classic.NVDANV50HalTesla          8.2.4
    com.apple.nvidia.classic.NVDAResmanTesla          8.2.4
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.7.0d10
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.3f10
    com.apple.driver.AppleHDAController          2.6.0f1
    com.apple.iokit.IOHDAFamily          2.6.0f1
    com.apple.iokit.IOFireWireIP          2.2.6
    com.apple.driver.AppleGraphicsControl          3.4.35
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.4.1
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOGraphicsFamily          2.4.1
    com.apple.iokit.IOBluetoothFamily          4.2.3f10
    com.apple.driver.AppleSMC          3.1.8
    com.apple.iokit.IOAudioFamily          1.9.5fc2
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.6
    com.apple.iokit.IOUSBMassStorageClass          3.6.0
    com.apple.driver.AppleUSBMultitouch          240.9
    com.apple.iokit.IOUSBHIDDriver          660.4.0
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.6
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.6
    com.apple.iokit.IOUSBUserClient          660.4.2
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          630.35
    com.apple.iokit.IOAHCIFamily          2.6.5
    com.apple.iokit.IOEthernetAVBController          1.0.3b4
    com.apple.driver.mDNSOffloadUserClient          1.0.1b5
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOUSBFamily          675.4.0
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.11
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          23
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.9
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f17
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D534F344758334D314131333333433920
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x029E, 0x434D534F344758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
    Bluetooth: Version 4.2.3f10 13477, 3 services, 23 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST1000LM014-1EJ164, 1 TB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Hub
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Internal Memory Card Reader
    USB Device: Apple Internal Keyboard / Trackpad
    USB Device: Hub
    USB Device: Cruzer Fit
    USB Device: IR Receiver
    USB Device: Built-in iSight
    Thunderbolt Bus:

    Mid-2010 15" MacBook Pros - the bad NVIDIA GPU
    If you're having frequent kernel panics with your 15" mid-2010, or intermittent screen problems, the problem is, more than likely, the faulty NVIDIA GPU found in a number of those machines.
    Here's just a sample of a kernel panic log that points to the faulty NVIDIA card:
    Kernel Extensions in backtrace (with dependencies):
             com.apple.GeForce(6.4.0)@0x82ac4000->0x82b7afff
                dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
                dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
             com.apple.nvidia.nv50hal(6.4.0)@0x83c05000->0x84019fff
                dependency: com.apple.NVDAResman(6.4.0)@0x834a0000
             com.apple.NVDAResman(6.4.0)@0x834a0000->0x8378dfff
                dependency: com.apple.iokit.IOPCIFamily(2.6.5)@0x7a802000
                dependency: com.apple.iokit.IONDRVSupport(2.2.1)@0x82fd3000
                dependency: com.apple.iokit.IOGraphicsFamily(2.2.1)@0x8301b000
    Here's the "official" Apple take on the issue - but the very real kernel panics need not be preceded by 'Intermittent black screen or loss of video'... in fact, you might not experience any video problems at all. Although video problems can certainly be a portent of things to come…
    So what can you do? Print out a copy of your kernel panic and a copy of the Knowledge Base article and take them, along with your machine, to your local Apple Store or an Apple Authorized Service Provider. The unfortunate thing is that many people have passed the “three years from date of purchase” now and Apple is not honoring the free logic board replacement for many users. Some dealers seem to be making some exceptions for those past the three year mark, but don’t count on it…
    Good luck,
    Clinton

  • IMac shuts down periodically

    Imac shuts down occasionally when there is no power outage.  Was trying to figure out why this happens.
    Any suggestions?  Are there specific logs that might help? 
    Thanks for the help

    Check the Energy Saver preference pane for scheduled shutdowns. If there are none, see below.
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CSeq 'n Cause: -' | tail | awk '/:/{$4=""; print}' | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.

  • USB Port shutting down...

    Anytime I plug in my Blackberry Storm to my USB port it gives me an error that it is drawing too much power and the port will be shut off...
    Why is this? I have had the phone for nearly a year and just now it is giving me an issue.
    Recently I upgraded my ram to 4gb, my HD to a 500gb 7200rpm drive. and updated the OS on my blackberry. Could any of this cause an issue?

    did you do the drive yourself? not saying you are not capable... the hard drives on these models are not very user friendly to install yourself. apple recommends a service provider do this for you...
    if you are fairly handy, mistakes can happen tho, something may have been messed with during the process.
    also, are you getting this on both ports? if so, how did you re-install OS X - o9r migrate to the new drive?
    are any other bb users complaining about usb issues with the new BB OS?
    Things to try: use the USB port towards the front, reload the OS on the phone, try a different cable, a powered usb hub, reinstall OS X from scratch.

  • Iphone 5s shuts down periodically

    New iphone 5s has started freezing.  The phone cannot be turned on without a hard reset.  Then it will work for a few minutes.  When I try to use phone it has a black screen...which means another hard reset.
    This just started after 3 weeks of no issues.
    Bad phone?  or bad software?  or Bad app?
    Thanks

    Hi, dwalker23. 
    Thank you for the question.  You may find this article helpful in troubleshooting your issue.
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Regards,
    Jason H.

  • How can i shut down depreciation for an Asset for few days??

    Hi Friends,
    How can i shut down depreciation of a particular Asset for few days say 5 days??
    I have done the necessary changes in Time dependent tab like checked asset shut down and in AFAMA i changed the shut dawn as YES.
    The only problem i am in is "how can i maintain the 5 days like from 10.05.2009 to 14.05.2009
    If i go to MORE INTERVALS then only From date is available over there.There is no To date opition.
    How can i maintain To Date??
    Plz suggest.
    Regards,
    Sumaya

    Hi
    Go for shut down approach. But your depreciation key should allow shut down. check your depreciation key configuration
    In asset master data
    Go to time dependent terms,
    Define the appropriate time interval for shutdown
    Set the shutdown indicator
    The system does not calculate the depreciation for the shut down period,
    The useful life of the asset will increase to the extent of shutdown period.
    When you remove the shutdown indicator, system automatically resumes the depreciation calculation.
    Regards
    Tanmoy

  • GT70 takes longer to shut down with Windows 8.1

    Hello all,
    Hope at this time I am not the only one experiencing my laptop taking longer to shutdown before 8.1. I am wondering what I can do to lessen my shut down time for my laptop. I have a GT70-0ne. The shut down process before I upgraded took less then three minutes but now that I upgraded to 8.1 takes around five to six or even longer.  I have read several ways to get rid of the longer shut down period is two make two accounts and delete one, change the performance options, and last revert back to regular windows 8. Hope to hear some advice on the best option to resolve the issue.

    Lots of things can prevent Windows from shutting down. Even when I forgot to close my document file, Windows just won't shut down and won't log me off, instead it just dim the background and pop up some options.
    Having Malwarebytes and Kaspersky running is not ideal, because they will likely to conflict with each other. Turn off 1 of them.
    It can also means your hard disk fragmentation is high. Try to defrag your harddisk once in a while.
    It could be one annoying features that Windows try to compensate its sluggish OS called hybrid shutdown (this is to hibernate your computer instead really shut down, so your computer can boot up faster in the next time you turn it on). You can google it.

  • USB shut down - too much power drawn

    Hi
    Yesterday when trying to connect my Canon EOS350D to my MBP, I changed the camera settings.
    Then, a message appeared on the MBP saying something like "A device is drawing too much power from the USB port - shutting down the bus".
    I figured it was temporary. Seems it's permanent. Many reboots and resets (PMU) later, no USB device that I own will work in any port in any way.
    Any ideas? I am fairly tech literate but this is my first Mac. All up to date.
    Thanks
    Dom

    OK - It seems to have been fixed.
    I called Apple, and they did a PRAM reset. When we restarted, still no joy, so we did a full hardware scan.
    This came up clean. They passed me on to a product specialist, but I had to go to work.
    Then, tonight, it works. Powered USB, data, all as new.
    So, I guess if this happens to you, do a PRAM reset and reboot a couple of times.
    Cheers
    Dom

  • Vibe 3.4 SSL link shutting down after 2-3 minutes of use

    I have a strange issue on a vibe 3.4 installation on SLES 11.3
    Vibe is installed using the default configuration and the port mapping is
    also configured as standard and works well for internal and external access.
    However the https:// secure link only works for 2 -3 minutes after
    the"/etc/init.d/teaming start" command then the port shuts down preventing
    any further secure links. The normal http:// links continues to work fine.
    The problem is we are trying to use the office integrations which only allow
    a https:// link
    There is something on the server that shuts the secure port 8443 down after
    2-3 minutes of operation
    Can anyone please give me some help as to where to start looking for the
    cause of this.
    Thanks
    Mark Behrens

    Mark,
    you can try other solution. It uses bouncycastle library.
    1. Check Java installation (you can have more on one machine) configured in Vibe. In file /opt/novell/teaming/teaming-config/installer.xml you can find:
    <JDK JAVA_HOME="/usr/lib/java/latest" type="Sun"/>
    2. Download file https://www.bouncycastle.org/downloa...dk15on-151.jar and copy it into [java]/lib/ext and [java]/jre/lib/ext (probably you have only of them, it's ok).
    3. Edit file [java]/lib/security/java.security and [java]/jre/lib/security/java.security (you have probably only one of them).
    find:
    security.provider.1=sun.security.provider.Sun
    security.provider.2=sun.security.rsa.SunRsaSign
    security.provider.3=sun.security.ec.SunEC
    security.provider.4=com.sun.net.ssl.internal.ssl.P rovider
    security.provider.5=com.sun.crypto.provider.SunJCE
    security.provider.6=sun.security.jgss.SunProvider
    security.provider.7=com.sun.security.sasl.Provider
    security.provider.8=org.jcp.xml.dsig.internal.dom. XMLDSigRI
    security.provider.9=sun.security.smartcardio.SunPC SC
    security.provider.10=sun.security.mscapi.SunMSCAPI
    and replace it with:
    security.provider.1=sun.security.provider.Sun
    security.provider.2=org.bouncycastle.jce.provider. BouncyCastleProvider
    security.provider.3=sun.security.rsa.SunRsaSign
    security.provider.4=sun.security.ec.SunEC
    security.provider.5=com.sun.net.ssl.internal.ssl.Provider
    security.provider.6=com.sun.crypto.provider.SunJCE
    security.provider.7=sun.security.jgss.SunProvider
    security.provider.8=com.sun.security.sasl.Provider
    security.provider.9=org.jcp.xml.dsig.internal.dom.XMLDSigRI
    security.provider.10=sun.security.smartcardio.SunPCSC
    security.provider.11=sun.security.mscapi.SunMSCAPI
    Restart Vibe and test all again.
    regards
    Pawel

  • Asset Shut down Process

    Hi
    Can anyone explain the Asset Shut down process in SAP?  The business requirement is to stop depreciatin depreciation for a time period if the asset relates to product specific machine and is currently not in use.  Start depreciating the Asset again when it is put to use
    I checked the Asset Shut down process (checkbox in Asset master) and changing Dep key to 0000. System does not calculate depreciation for the time interval i give in shut down period but once i uncheck the box and change dep key, system posts depreciation for the current period as well as for the period it was shut down
    Is there a way to avoid depreciation posting for the period it is shut down?  Am i missing something here or the correct process will be to to do an asset transfer to a non-depreciable asset class for shut down period and then again bring it back to original asset class
    Please advice
    Shiv

    Hi PAul
    Thanks for the response.  I did check Asset Shutdown checkbox on the time dependent tab and in addition changed the depreciation key.  With this setting system do not calculate depreciation when i run AFAB.  The moment i uncheck this box, system posts depreciation even for the shut down period.  Is there a way to avoid depreciation for the period when it was shut down even after unchecking the Asset shut down check box
    Thanks
    Shiv

  • On my new iPhone 4S, I periodically get a "Sim failure" message and I loose my Verizon connection. To get service back I need to shut down the phone and start it up again.

    On my new iPhone 4s, I periodically get a "Sim failure" message and I loose my Verizon connection. To get service back, I need to shut down my phone and restart it.

    Have you tried removing and replacing the SIM? If that doesn't work, try a new SIM from Verizon, they will usually swap them out for you for free. If those don't work, you might need to get the phone checked out, it may have a bad SIM port.

  • Ipod shuffle shuts down PC when put in USB port

    Hello
    I found a discussion on this topic from 2006 but there were no solutions.  Hopefully in 2014 there is someone out there that can help me.
    I have successfully synced, loaded and recharged ipod shuffle on PC.  But this week I plugged in my ipod shuffle (early generation) into the USB port to recharge, the system shut down, and I got the "blue screen of death". Windows XP blue screen indicated there was some software or hardware that might cause harm to PC.  I had to close PC by pressing button on tower.  I tried couple more times and got same message.  No harm has been done to PC as far as I can tell.  I used the Safely Remove Hardware device and not sure it worked but removed shuffle.  I did do this 2 or 3 times with same result each time.  Ipod shuffle still works. 
    Thanks!

    I have found the solution.  I installed the most recent updates and it works now.

  • Port 6800 is Shutting down for Reporting and Analysis Framework

    I have successfully (based on no errors in the log) installed and configured ReportingAnalysis and FR in Wintel 2008 and 11.1.2 environment but when services are started port 6800 and starts but shuts down after few minutes and get Namespace Process Error while logging into Workspace.
    Upon looking into log files, I found following:
    [2011-02-17T12:10:46.854-05:00] [EPMRAF] [ERROR] [] [oracle.EPMRAF.com.brio.one.component.property.impl.database.PropertyDBManager] [host: serverDNS] [nwaddr: serverIP] [tid: 10] [userId: serverDNS$] [ecid: 0000IsoaY2IEcLPMyeU^MG1DNLQ8000003,0] [SRC_CLASS: com.brio.one.component.property.impl.database.PropertyDBManager] [SRC_METHOD: addPropertyDefinitionsToAggregate:?] [originator_name: GlobalServiceManager] ERROR - more than 1 propertyDefinitionChildren exist for ArrayPropertyDefinition 0ad72289-0002-0415-000000ea038ab234
    Thanks for your help in advance!

    I have the same error as the original poster in my GSM log.
    lsof -i:6800 returns the proper pid for financial reporting. Everything appears to be running correctly.
    However, when i try to connect using financial reporting studio I get this error:
    [2011-03-24T11:04:41.964-07:00] [EPMFR] [ERROR] [] [oracle.EPMFR.core.reporting.reportstore.ReportStoreManagerImpl] [tid: main] [ecid: 0000Ivd22Jz3FCWjLxrI8A1DYsSo000000,0] [SRC_CLASS: com.hyperion.reporting.reportstore.ReportStoreManagerImpl] [SRC_METHOD: createRepositorySession] [[
    com.hyperion.reporting.util.HyperionReportException: ; nested exception is:
         javax.jcr.LoginException: System 9 Platform error: GsmNotFound.
         at com.hyperion.reporting.reportstore.ReportStoreManagerImpl.createRepositorySession(Unknown Source)
         at com.hyperion.reporting.reportstore.ReportStoreManagerImpl.<init>(Unknown Source)
         at com.hyperion.reporting.client.ReportClient.<init>(Unknown Source)
         at com.hyperion.reporting.client.DesignerManager.getRemoteConnection(Unknown Source)
         at com.hyperion.reporting.javacom.DesignerManagerComImpl.getRemoteConnection(Unknown Source)
    Caused by: javax.jcr.LoginException: System 9 Platform error: GsmNotFound.
         at com.hyperion.reporting.jsr283.foundation.FoundationRepository.joinSession(FoundationRepository.java:223)
         at com.hyperion.reporting.jsr283.foundation.FoundationRepository.login(FoundationRepository.java:90)
         at com.hyperion.reporting.jsr283.foundation.FoundationRepository.login(FoundationRepository.java:107)
         ... 5 more
    The GSMNotFound error makes me feel there is something going on with my port 6800.
    Weird. Any ideas anyone?

Maybe you are looking for