Cisco 5510 blocking all websites except a few

Hello:
I see many post about how to block a single website, but I want to do the opposite. I would like to block all website except for a handful of them. Does anyone have any example configs?

Hi,
Yes you should be able to:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml
Of course, you will need to create some soft of regex that will deny all the websites such as *.com, but first of course permit the websites you want.
Another option will be using FQDN acls (Only supported on version 8.4.2 and higher) Here is the example.
https://supportforums.cisco.com/docs/DOC-17014
Cheers,
Mike

Similar Messages

Blocking all websites except a few + Skype and other chat programs

Hello,
Can you tell me how can i block all websites from a network except a few of them using a Linksys wireless router?
Also, i need to block several ports used for Skype and other chat apps.
I want this solution to work for the whole network. Not using windows policy or other ways where i'd have to go to every single computer.
Thank you.

There's a way on how to do that but it depends on the model number of your device. What's the model number of your router anyway?

Block All Websites except for a few

I have a Linksys WRT54G router. I just got my 7 and 9 year old kids a computer. I need to block all websites except for about 5 - 10 websites that my wife and I let them visit. I don't think I can do this with the WRT54G router, but does anyone know how I can do it.
Thanks,
Skooter Columbo

unfortunately, on wrt54g routers, you can only block and not allow websites.
and to block websites, you can only put up to 4 websites which is what you do not want to do. cause you said you need to block all websites except for 5-10 sites.

Sophos Endpoint security: Block all websites except one

I've been trying to find out how to block all websites except one, in an end user, by creating a policy in the Sophos Enterprise Console. I can see an option - Full web control but it requires an appliance. My question is, it is possible block all websites except one with Sophos? I appreciate if anybody knows, and can tell me how. I have downloaded the trial version of Sophos. If it's possible, I'll try Sophos ES for a year, for the end users and servers.
This topic first appeared in the Spiceworks Community

Team Folder in the past was managed by administrators. Administrator can create, edit, delete team folders. The team folder can be published to a group of users, including Active Directory group. It is very convenient to share files and folders with a group of users in the same team. As team groups bigger, it may not be convenient for administrator to manage all the team folders. So it makes sense for administrator to assign some users to be able to manage team folder that they own themselves. Role Manager It usually starts with the role manager by creating a role with Add/Edit/Delete permissions and assign it to users or Active Directory groups. Manage Team Folder The user who are in the private team folder role will be able to manage team folders without seeing all the team folders from everyone. Here is a YouTube Video about...

How do I block all sites except a few?

We want clients to only have internet access to five websites. Is there a way to do this?
All computers are either XP Home 2002 32 bit or Windows 7 64 bit
We are using Firefox 15.0
Thank you.

The easiest way to block websites in Mozilla Firefox is by using a third-party add-on called [http://goo.gl/QePcl Web Filter]. The Filter extension blocks sites that have been added to its "blacklist," but it can also be set up to disable any links to the blocked sites by showing nonfunctional text instead of hyperlinks. The Filter also has a "password protection" feature that helps prevent unwanted changes to BlockSite by others.

Blocking All Numbers Except A Few

Hi,
My friend is having the same person call her from diffrent numbers. Is there any way that you can create a list where you add the numbers that are allowed to call you? My friend has had to block 15 numbers all from the same person.
Thanks
Reece F

Have her talk to her carrier.
She might want to consider changing her number.
Also, see what Google Voice can do for you. (USA only)

Win 8.1 domain workstation. Block all access, except for a fews users/groups and domain controller information/date.

Hi!
Win 8.1 pro, domain workstation. How Block all access, except for a fews users/groups and domain controller information/date.
Nuance:
From domain AD is locked Workstation Firewall "Domain profile" edit.
Possible?
cenubit

Hi GirtsR,
I am not sure the command to use the SID to accomplish what you want to achieve, if you only know the SID, you could take use Powershell to find the related information, more information, please check:
Working with SIDs
And a similar thread for reference:
How to find user/group known only SID
More reference: Default local groups.
Best regards
Michael Shao
TechNet Community Support

I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)

I am unable to view flash videos from all websites except youtube after updating to Firefox 4. All help will be appreciated. Thanks in advance :)

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

How to Set Up Content Blocker to Block All Sites Except Those That Are Listed?

How to Set Up Content Blocker to Block All Sites Except Those That Are Listed by Firefox?

One other item I thought I would pass along...
I noticed that the NVG589 gets terribly confused if a device behind it isn't setup properly first to be a static address.
Here's the behavior: Say you have a router of your own and you intend to give it one of the addresses from your static IP block. You decide to set it up first and don't make the changes initially in the 589 to force it to be a static IP of some kind-- whether in the private or the public block. You configure the router in this case with DHCP. Your router starts handing out addresses in its own IP range however your configured it.
But look what the 589 thinks is happening: it sees the DHCP client name associated with the same MAC address changing constantly. It makes entries for each different client name in its device list, sometimes aging out, sometimes not.
Now trying to save the private IP will result in a "missing data" error. Worse, trying to change things to a public static IP will result in similar messages about the IP being in the wrong range.
The same issue can also occur if the device was setup statically in the private range and you try to change it to a public static IP.
The only way to fix this:
1) If you intend to advertise the router on an IP from your static block, disconnect all devices from the router and the RG, except for the router you want to setup. Wait for the RG to see them as "offline" in the device list. Alternatively, if you intend to setup another device or server on a Static IP, make sure it is the only device connected to the RG.
2) Switch the IP allocation to "Public"
3) Renew the lease on the device
4) Go into the IP Allocation page and fix the IP to one of the public static IPs from your pool
5) Reconnect all devices.
Generally, the best practice is to setup each static IP device before connecting any others to the RG.

Block all URL except one or two in WRSV4400N

Hi,
I have a WRSV4400N router and I need to block all URL except one or two. Can I do it with or whitout TrendMicro ProtectLink??
Thank you

Hi Axondigital,
Your english is very good. I did say "check and see" in my earlier post and not here is a solution.
To answer your original question , the answer is NO.
URL filtering is a limitation you will find in a product like the WRVS4400N, but you will not find that limitation in the new and more powerful SA520 which has an URL allowed and blocked list.
My advice would be, evaluate trendmico protectlink if you wish and see what you think. send a email to the following address to get a evaluation license;
[email protected]
But try a SA500, if that customer really needs a low cost, but capable router that requires URL allowed list.
regards Dave

Block all currencies except GBP

Hi All, I appreciate this may be a little unconventional, but my company wants only to use GBP in their system,
They currently use MM Purchasing, ISH - healthcare module, SD and others as well as the finance suite.
is there an easy way to block all currencies across the system apart from GBP?
I'm considering setting all currencies as expiring currencies except GBP but any other suggestions would be very welcome
thanks
Phil

I am afraid to delete the currencies in TCURR table, as they are client independent and if tomorrow for any reason you need multiple currencies, then it would be an issue.
Therefore, please look into the following threads and check with your ABAPer:
Validation rule in Purchase Order to error a G/LAcct with Acct Assign Cat K
ME21n T code Validate through GGB0 or OKC7
Validation during PO entry(GL Account in ACcount assignment)

Block all websites apart from the homepage for all users. Citrix environment with Server 2003.

Citrix Xenapp 5 and Windows server 2003 environment. We want to force Firefox to kiosk mode with a pre-set homepage for all users. I also want to lock this to only one website. I have managed to set up the kiosk mode with R-Kiosk addon and Mozilla.cfg file. I am trying to use BlockSites to block all internet sites and only allow the one site with the whitelist option. I can get the addon to install for all users, but can’t get the default settings across. I have tried to add this with the Mozilla.cfg file, but it looks like this addon is getting it’s settings from the profile folder. If I set the preferences for the addon in Mozilla,cfg file, it actually picks it up but it doesn’t apply it to the addon for some reason. Does anyone have any other ideas on how I can lock this down to the one site?

I am not entirely sure how to do this, but the enterprise community would be a good place to ask. They have a email group you can ask on this page: [https://www.mozilla.org/en-US/firefox/organizations/faq/]

Forbidding all websites except for one or two?

Is there a way to forbid all websites expect for one or two sites? We are looking into getting a couple ipads for our business but need the employes not to use them for personal use. Please help!!

General -> Restrictions -> Websites
In that section select "Specific websites only" and you can enter in the sites you want your users to be able to access. Note that to the best of my knowledge it applies only to the built-in web browser, Safari, so you'll need to also turn off the ability to install apps or your users can just download some other browser.
Regards.

Firefox opens all websites except facebook says cannot find server only started a few days ago before that all was ok

FIREFOX HAS BEEN CRASHING MANY TIMES A DAY AND HAS RECENTLY STOPPED OPENING FACEBOOK SAYS SERVER NOT FOUND

Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.

From external: block all domains except one MAPPINGS file?

Here's the problem...
I have an old domain that my mailserver is still authoritive for. We receive mail through a mail ISP cluster, in that sense that our internal mailserver does not have any MX-records associated with it. All MX-records point to the ISP.
We have recently changed domain name because of a merger.
I am still rewriting all RCPT TO: [user]@olddomain.com to RCPT TO: [user]@newdomain.com in imta config.
I now want to end that rewriting using the mappings file for all except but one domain.
So the end result should be:
MAIL FROM: all domains -> [user]@olddomain.com REJECT $Netc......
but!
MAIL FROM: specific domain -> [user]@olddomain.com should still be passed on to the IMTA.
I have used SEND_ACCESS before as a method of blocking mail, but this is specific... I want to block the whole world except one originating domain (for the old domain)
Does anyone have a working example of this and could you provide it for me?
TIA
Eli

Jay :-)
We have reinstalled iPlanet Messaging Server 5.2 on Windows Server using all new servername FQDN and all new domain hosting for.
FQDN: mail.new-domain.local
Mail authoritive for: new-domain.com
Server is located on the LAN and gets it's mail from an ISP using mailkick.
Server is actually not aware (neither in MX, nor in LDAP records) of the old domain.
The only way the server gets it's mail is through smart-hosting. It just works and acts as a new server. Mail for the old-domain.com (organization) is accepted because I rewrite the domain part of the old-domain.com to new-domain.com
old-domain.com $U%[email protected]
Server accepts mail from all sending/origination domains only for the TO: new-domain.com it is authoritive for.
Now here is the catch... I want to disable the TO: domain-rewriting, because people need to use the new-domain when addressing us.
There is still only ONE organization out there that needs to address the old-domain.com because of X.509 encrypted mail. This is the only domain I will do rewriting for.
Hence is why I was looking at the SEND_ACCESS
It has some ways of blocking part of a sender or address part of a enveloppe based on wildcards etc....
Yet only blocking....
How do I block the whole world except that old organization we still do business with. Mail for the old domain is also delivered through the same mailkick by ISP.
So if whole world -> [some user]@old-domain.com REJECT
and
single organization -> [some user]@old-domain.com ACCEPT and continue REWRITING
Hope I shed a bit more light on the subject....
Eli

Cisco 5510 blocking all websites except a few

Similar Messages

Maybe you are looking for