Cisco 6500 X6066 CSM Module Reporting
Hi;
Is there any tool for reporting on csm module reals/vservers etc. connections between given time periods ?
If not , may i export these values with any commands from cli ?
Thanks
Umut
Hi,
You can use any SNMP tool to monitor CSM using SNMP MIBS.The Cisco CSM supports two Read Only MIBs: CISCO-SLB-MIB and CISCO-SLB-EXT-MIB, which are available at ftp://ftp.cisco.com/pub/mibs/.
Traps can be sent based on real server, virtual server, and fault tolerant state changes. This is an old product and not much options are available SNMP wise.
While searching more related to this TOPIC i found a similar discussion. Kindly go through it and see if it helps you.
https://supportforums.cisco.com/thread/2024621
The CSM also allows you to confiure TCP scripts for HM and other particular tasks. Please have a look at the link below for details regarding the scripts:
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csm/3.2/configuration/guide/scriptg.html
Regards,
Kanwal
Similar Messages
-
How to configure 2 CSM modules in 6500 ?
hi,
6500 supports multiple CSM modules in one chassis. I check the configuation about the CSM with 2 modes one is rp and another is csm. another mether is to enter the csm module. Does anyone know the current way to setup the 2 csm modules in one 6500 or give me a sample ?
best regards.
fred.If you are running muliple CSM's in the same chassis you need to run in csm mode, otherwise if you are running a single csm in a chassis you can run in rp mode.
hope that helps
I am running one csm in each chassis and fault-tolerant
mark -
Cisco 6500 power supply and module (hot-swappable?)
Hi everyone!
We have currently a Cisco 6500 with 2 power supply of 3000w. We want to replace these PS for 2 new ones, which have higher wattage: 6000w.
Can we replace them without needing to turn the 6500 off?. I mean, What happens if we insert a 6000w PS and the switch is working with one 3000w PS?
Is it possible to do this replacement "on hot"?
And second, we also have a ws-x6708-10g-3c module. Can we insert this module "on hot"? Without needing to turn the Catalyst 6500 off?
Thanks a lot! and looking forward to an answer.Depends on your setup the table should be able to help:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/12-2SX/configuration/guide/book/pwr_envr.html#wp1020384
Configuration Change
Effect
Redundant to nonredundant
•System log and syslog messages are generated.
•System power is increased to the combined power capability of both power supplies.
•Modules marked power-deny in the show power oper state field are brought up if there is sufficient power.
Nonredundant to redundant (both power supplies must be of equal wattage)
•System log and syslog messages are generated.
•System power is decreased to the power capability of one supply.
•If there is not enough power for all previously powered-up modules, some modules are powered down and marked as power-deny in theshow power oper state field.
Equal wattage power supply is inserted with redundancy enabled
•System log and syslog messages are generated.
•System power equals the power capability of one supply.
•No change in module status because the power capability is unchanged.
Equal wattage power supply is inserted with redundancy disabled
•System log and syslog messages are generated.
•System power is increased to the combined power capability of both power supplies.
•Modules marked power-deny in the show power oper state field are brought up if there is sufficient power.
Higher or lower wattage power supply is inserted with redundancy enabled
•System log and syslog messages are generated.
•The system does not allow you to operate a power supply of different wattage even if the wattage is higher than the installed supply. The inserted supply shuts down.
Higher or lower wattage power supply is inserted with redundancy disabled
•System log and syslog messages are generated.
•System power is increased to the combined power capability of both power supplies.
•Modules marked power-deny in the show power oper state field are brought up if there is sufficient power.
Power supply is removed with redundancy enabled
•System log and syslog messages are generated.
•No change in module status because the power capability is unchanged.
Power supply is removed with redundancy disabled
•System log and syslog messages are generated.
•System power is decreased to the power capability of one supply.
•If there is not enough power for all previously powered-up modules, some modules are powered down and marked as power-deny in theshow power oper state field.
System is booted with power supplies of different wattage installed and redundancy enabled
•System log and syslog messages are generated.
•The system does not allow you to have power supplies of different wattage installed in a redundant configuration. The lower wattage supply shuts down.
System is booted with power supplies of equal or different wattage installed and redundancy disabled
•System log and syslog messages are generated.
•System power equals the combined power capability of both power supplies.
•The system powers up as many modules as the combined capacity allows. -
NTP protocol support in Cisco CSM module
Can anyone plz advice if CSM module will support load balancing NTP traffic on the server ?
Here is what i see in CSM with ntp traffic reaching real servers
prot vlan source destination state
In UDP 45 10.200.210.20:123 172.20.95.39:123 ESTAB
Out UDP 39 172.20.88.101:123 10.200.210.20:123 ESTAB
vs = NFTBZTKVIP, ftp = No, csrp = True
real = (n/a)
Could it be that..real servers not replying back to these ntp based packets or from your point what could be holding them back.
I will send you the trace once i pick them up.
Kashi -
How to Configure Transparent caching on Cat 6500 with CSM in bridge mode?
hi.
I found How to Configure Transparent caching on Cat 6500 with CSM in routed mode.
But,
I need help How to Configure Transparent caching on Cat 6500 with CSM in bridge mode?
Please let me know sample configuration.
thanks.Hi,
I wrote the document you mentioned and I also wrote the one below.
http://www.cisco.com/en/US/partner/products/hw/modules/ps2706/products_configuration_example09186a00802c1201.shtml
The one with the SSLM is a bridge mode config.
If you replace the SSLM with a cache [or a farm of caches] it would be a similar config.
Replace the SSL21 vserver with an HTTP vserver [most important is to keep the vlan configured on each vserver]
Regards,
Gilles. -
How to Configure Transparent caching on Cat 6500 with CSM in routed mode
I am trying to configure Transparent caching on Cat 6500 with CSM in routed mode, but facing some problems in it , also I have gone thru the example config on cisco site for transparent caching using CSM on Cat 6500 , but the above does not fit my clients requirement.
The scenario is like
Access Switches - Cat6500 with MSFC & CSM - Internet Router
|
Cache Engines and Real servers
The clients as well as real servers are on seperate VLANs (L3) and the requirement is to load balance the internet traffic using cache engines.
I'd really appreciate any helpful suggestions or any useful links/docs/info on this.
Thanks
kumarHello Joerg,
Thanks for the reply.
I have already gone thru the sample config shown by this weblink, however this link refers to configuring transparent caching on the CSM in BRIDGED MODE ( i.e both the client and server vlans are having the same IP address ) but in our case , we have multiple L3 VLANS on the CAT6509 having IP addresses in different SUBNETS , and the Real servers to be used for caching also exist on one of these VLANS. Thus, the scenario described by the Weblink does not apply here. Also , in the configuration referred by the above weblink, the VLAN 100 is configured as client , however the endusers are shown to be on vlan200 which is configured as SERVER VLAN in the CSM.
Dont you think there is something wrong here, I mean the endusers should be on VLAN 100 (Client) and real servers on VLAN 200 (SERVER).
So, I have to configure CSM in routed mode ( i.e both the client and server vlans will have seperate IP addresses in different subnets ) and the endusers will be on all VLANS .
Pls let me know , how I can implement this solution.
Thanks again
Sudhir -
PPPoE Cisco 6500 + 7600-SIP-400
Hello,
we use a lot of Cisco 6500 switches across our network. I bought one 7600-SIP-400 with one SPA-5X1GE-V2 module.
Unfortunatelly I have found that there is no command support for PPPoE in my IOS version 12.2 SXI13.
Can somebody tell me which IOS version do I have to use to get command support for PPPoE Server?
Thank you.
Milan"Doesn't have to be a Cisco box. "
If you're still interested in solving this (or haven't already), you can mail me at [email protected]
Cheers,
Anton -
SAP PS Module Report, Help needed for the Right Logic.
Hi,
I have to develop a PS module Report . This spec of this report is when you enter , project # , month , date , proj type it should display all the projects and only the billing levels with different fiels like ITD cost, ITD sales, ytd cost, sales, awards etc etc.
Right now Iam getting the O/P : in the following manner, There are many fields I am just showing the desired ones which have to be changed.
Proj, Title, award, ITDsales, ITD cost , ytd sales, ytd costs,
14148, New prj 123 -- --- -
14148-B01, bill1 -
234 -
456 -
14148-B02, bill2 -
789 -
123 -
14148.001 wbs1 -
123 -
456
14148.001 wbs2 -
567 -
890
But for me the desired output must be only for project and the billing levels. It shouldnt be for WBS elements xxxx.001 and xxxx.002.
Desired output:
Proj, Title, award, ITDsales, ITD cost , ytd sales, ytd costs,
14148, New prj 123 -- 690 -
1346
14148-B01, bill1 -
234 -
456 -
14148-B02, bill2 -
789 -
123 -
The ITD costs and YTD costs must be added 123 + 567 = 690 and
456+890 = 1346.
And these values must come on the project level.
P.S: I can restrict the values for wbs elements , means I can filter them at PRPS table by giving prps-stufe LE 2. Then I wont get the wbs level, But I want the values of these to be added up and then show it on the project level.
Please go through this code and let me know where exactly I need to put the right logic to work in the desired manner.
Thanks in advance
Dan
Code Below************************
[code]TABLES: PROJ, "Project Definition
PRPS, "WBS Elements
prhi,
CEPC, " Profit Center w/ Group Head info
BPGE, "Plans (12, 13, etc.)
COSP, "Primary Cost Element (Bill Sales, DPC)
COSS, "Secondary Cost Element (Shrd Sls,Sal,etc)
COSB, "Results Analysis Cost Elements (Unbil Sls)
COOI, "Commitments management: Line items
JEST, "Project Status
TCJ04, "Person Responsible for Project
zpclasses, "Project classes.
New Added
CRCO, " Assignment of Work Center to Cost Center
CRHD. " Work Center Header
Record Layout of extracted data
TYPES: BEGIN OF EXDEF, "Data definition of extract data
X_BU(2) TYPE C, "Business Unit
X_CNTR(10) TYPE C, " Profit Center
X_PROJ(24) TYPE C, "Project def (Prj)
X_CREP(30) TYPE C, "Contract Rep.
X_BDREP(25) TYPE C, "BD Rep. name
X_GRPH(15) TYPE C, "Tech Rep employee name
X_ACTREP(15) TYPE C, "Acct Rep employee name
X_PMGR(15) TYPE C, "PM employee name
X_TTLE(35) TYPE C, "Title
X_CLNT(20) TYPE C, "Client
X_POCN(20) TYPE C, "Prime Contract Number
X_TYPE(13) TYPE C, "Order Type Sarnoff
X_OPEN(10) TYPE C, "Open Date
X_CLOSE(10) TYPE C, "Close Date
X_CGT(4) TYPE C, "CO, GV, TC
X_DISTR(2) TYPE C, "Distribution Channel
X_CONTR(6) TYPE C, "Percentage contribution
X_AWRD(14) TYPE C, "Award (Plan 11)
X_P12R(14) TYPE C, "Auth Revenue (Plan 12 @ Rev)
X_P12C(14) TYPE C, "Auth Cost (Plan 12 @ Cost)
X_P13R(14) TYPE C, "Auth Revenue (Plan 13 @ Rev)
X_P13C(14) TYPE C, "Auth Cost (Plan 13 @ Cost)
X_ITDS(14) TYPE C, "ITD Sales
X_ITDC(14) TYPE C, "ITD Costs
X_YTDS(14) TYPE C, "YTD Sales
X_YTDC(14) TYPE C, "YTD Costs
X_MTHS(14) TYPE C, "Current Month Sales
X_MTHC(14) TYPE C, "Current Month Costs
X_ITDB(14) TYPE C, "ITD Billed Sales
X_YTDB(14) TYPE C, "YTD Billed Sales
X_MTHB(14) TYPE C, "Current Month Billed Sales
X_COMM(14) TYPE C, "Commitments
X_STAT(6) TYPE C, "Active or Inactive (REL, TECO, or CLSD)
X_ZPROJCLASS(12),
X_MTHIC(14) TYPE C, "Current Month Incremental Costs
X_YTDIC(14) TYPE C, "YTD Incremental Costs
X_ITDIC(14) TYPE C, "ITD Incremental Costs
X_ZSCURVE(10) TYPE C, "S-CURVE Status
New Added
X_CM_COST(20) TYPE C,
X_AM_COST(20) TYPE C,
X_TL_COST(20) TYPE C,
X_KP_COST(20) TYPE C,
X_PM_COST(20) TYPE C,
END OF EXDEF.
Data declarations
FIELD-SYMBOLS <MNT> .
DATA: ETAB TYPE EXDEF OCCURS 100 WITH HEADER LINE.
DATA: X1_PM_COST(20) TYPE C,
X1_TL_COST(20) TYPE C,
X1_AM_COST(20) TYPE C,
X1_CM_COST(20) TYPE C,
X1_KP_COST(20) TYPE C.
DATA: KOKRS_FIXED LIKE PROJ-VKOKR VALUE 'DSRC', "Controlling Area
TOTAL_AWARD LIKE BPGE-WTGES,
TOTAL_AUTHR12 LIKE BPGE-WTGES,
TOTAL_AUTHC12 LIKE BPGE-WTGES,
TOTAL_AUTHR13 LIKE BPGE-WTGES,
TOTAL_AUTHC13 LIKE BPGE-WTGES,
TOTAL_ITDSALES LIKE BPGE-WTGES,
TOTAL_ITDCOSTS LIKE BPGE-WTGES,
TOTAL_ITDICOSTS LIKE BPGE-WTGES,
TOTAL_YTDSALES LIKE BPGE-WTGES,
TOTAL_YTDCOSTS LIKE BPGE-WTGES,
TOTAL_YTDICOSTS LIKE BPGE-WTGES,
TOTAL_MTHSALES LIKE BPGE-WTGES,
TOTAL_MTHCOSTS LIKE BPGE-WTGES,
TOTAL_MTHICOSTS LIKE BPGE-WTGES,
TOTAL_ITDBILLED LIKE BPGE-WTGES,
TOTAL_YTDBILLED LIKE BPGE-WTGES,
TOTAL_MTHBILLED LIKE BPGE-WTGES,
TOTAL_COMMITMENT LIKE COOI-WTGBTR,
HOLD_PRART LIKE PRPS-PRART,
COUNT_PROJECTS TYPE I,
MNT_INDX(20) TYPE C,
HLD_INDX(3) TYPE N,
YYYY_MM(10) TYPE C,
TEMP-DATE(8) TYPE C.
Selection Screen
SELECTION-SCREEN SKIP 3.
SELECTION-SCREEN BEGIN OF BLOCK XEXTRPM WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 2.
PARAMETERS MONTH(2) TYPE N OBLIGATORY.
PARAMETERS YEAR(4) TYPE N OBLIGATORY.
SELECT-OPTIONS: EXTRPRJ FOR PROJ-PSPID. " Range of Projects
SELECT-OPTIONS: EXTRTYP FOR PRPS-PRART. "Project Types (CO,GV,etc.*)
SELECT-OPTIONS: EXTRPCTR FOR PROJ-PRCTR. " Range of Profit centers
SELECTION-SCREEN SKIP 2.
PARAMETERS: OPT1 RADIOBUTTON GROUP OPTN,
OPT2 RADIOBUTTON GROUP OPTN DEFAULT 'X'.
select-options : s_pc for proj-zprojclass. "project class
SELECTION-SCREEN END OF BLOCK XEXTRPM.
Select Tables
START-OF-SELECTION.
write: / 'Sales data (Unshared) extracted on: ', sy-datum.
uline.
CLEAR: COUNT_PROJECTS,
TOTAL_AWARD,
TOTAL_AUTHR12,
TOTAL_AUTHC12,
TOTAL_AUTHR13,
TOTAL_AUTHC13,
TOTAL_ITDSALES,
TOTAL_ITDCOSTS,
TOTAL_YTDSALES,
TOTAL_YTDCOSTS,
TOTAL_MTHSALES,
TOTAL_MTHCOSTS,
TOTAL_ITDBILLED,
TOTAL_YTDBILLED,
TOTAL_MTHBILLED,
TOTAL_COMMITMENT,
ETAB.
PROJ Table Project Definition
SELECT * FROM PROJ "Project Definition
WHERE PSPID IN EXTRPRJ AND " Range of Project Numbers
PRCTR IN EXTRPCTR and " Range of Profit center
zprojclass in s_pc. "project class
SELECT * FROM PRPS WHERE "WBS Elements
PRART IN EXTRTYP " Range of Proj.Types (CO,GV,TC..
and PSPHI = PROJ-PSPNR.
HOLD_PRART = ' '. "clears project type
CLEAR ETAB.
ETAB-X_PROJ = PRPS-POSID.
ETAB-X_BU = PRPS-PRCTR(2). "Business Unit
ETAB-X_PMGR = PROJ-VERNA. "Project Manager
IF PRPS-PRCTR(2) = '01'.
ETAB-X_CNTR = PRPS-PRCTR. " Profit Center
CONCATENATE SPACE PRPS-PRCTR INTO ETAB-X_CNTR SEPARATED BY SPACE.
ELSE.
ETAB-X_CNTR = PRPS-PRCTR. " Profit Center
ENDIF.
ETAB-X_TTLE = PRPS-POST1. "Title
CLEAR TEMP-DATE.
TEMP-DATE = PROJ-PLFAZ. "Project planned start date
CONCATENATE TEMP-DATE4(2) '/' TEMP-DATE6(2) '/'
TEMP-DATE+0(4) INTO ETAB-X_OPEN.
TEMP-DATE = PROJ-PLSEZ. "Project planned finish date
CONCATENATE TEMP-DATE4(2) '/' TEMP-DATE6(2) '/'
TEMP-DATE+0(4) INTO ETAB-X_CLOSE.
Tech Lead
will comment below
SELECT SINGLE VERNA FROM TCJ04 "Tech Lead name from TCJ04
INTO (ETAB-X_GRPH) WHERE VERNR = PROJ-ZGRPHD.
End Of Tech Lead
Account Manager
SELECT SINGLE VERNA FROM TCJ04 "Acct Manager from TCJ04
INTO (ETAB-X_BDREP) WHERE VERNR = PROJ-ZBUSDEV.
******End Of Account Manager
Key Personnel
SELECT SINGLE VERNA FROM TCJ04 "Account Rep name from TCJ04
INTO (ETAB-X_ACTREP) WHERE VERNR = PROJ-ZRESPDIR.
********End of Key Personnel
**Contract Manager
SELECT SINGLE VERNA FROM TCJ04 "Contract Rep name from TCJ04
INTO (ETAB-X_CREP) WHERE VERNR = PROJ-ZCNTREP.
End of Contract Manager
PRPS Table WBS's attached to the Project
SELECT * FROM PRPS WHERE "WBS Elements
PRART IN EXTRTYP "Range of Proj.Types (CO,GV,TC..
AND PSPHI = PROJ-PSPNR.
order by posid stufe. "Sort by WBS & Level (needed?)
get info from level 1 of the WBS
IF PRPS-STUFE EQ 1. "top-level WBS element
HOLD_PRART = PRPS-PRART. "save project type for later
ETAB-X_STAT = '????'. "set ? as the default status
get Status for level 1
SELECT * FROM JEST "use JEST to determine Status
WHERE OBJNR = PRPS-OBJNR
AND INACT EQ SPACE. "space denotes an active status
CASE JEST-STAT. "find the system status (Ixxx)
WHEN 'I0001'.
ETAB-X_STAT = 'CRTD'. "Created
WHEN 'I0002'.
ETAB-X_STAT = 'REL'. "Released
WHEN 'I0045'.
ETAB-X_STAT = 'TECO'. "Technically Complete
WHEN 'I0046'.
ETAB-X_STAT = 'CLSD'. "Closed
ENDCASE.
ENDSELECT.
Select only active projects (ie; those not with TECO or CLSD)
IF OPT2 EQ 'X'
AND ( ETAB-X_STAT EQ 'TECO'
OR ETAB-X_STAT EQ 'CLSD' ).
EXIT.
ENDIF.
*comment Contract Rep and Proj man because we get them from PROJ now
etab-x_crep = prps-zzcont. "Contract Rep.
etab-x_pmgr = prps-verna. "Program Manager Name
ETAB-X_CLNT = PRPS-ZZMANDT. "Client Name
ETAB-X_CGT = PRPS-PRART. "CO, GV, TC, etc
ETAB-X_DISTR = PRPS-ZZVTWEG. "Distrib Channel (ie; GP, etc.)
ETAB-X_CONTR = PRPS-USR04. "Contribution %
ETAB-X_POCN = PRPS-ZZPOCN. "Contract Number
ETAB-X_TYPE = PRPS-ZZORDT. "Order Type Sarnoff
Award and Authorization (Revenue & Cost)
SELECT * FROM BPGE
WHERE OBJNR = PRPS-OBJNR
AND LEDNR = '0001' "Budget / Planning Ledger
AND TRGKZ = 'N' "Object indicator
AND WRTTP = '01' "Value Type
AND ( VERSN = '011' "011 = Award
OR VERSN = '012' "012 = Billing Authorization
OR VERSN = '013' ). "013 = RA Authorization
"010 = Funding Authorization
Award Plan 11
IF BPGE-VERSN = '011'. "Plan 11 = Award
CASE BPGE-VORGA.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_AWRD = ETAB-X_AWRD + BPGE-WTGES.
ENDCASE.
ENDIF.
IF prps-stufe eq '2'.
Authorization (Revenue & Cost plan 12) Plan 12
IF BPGE-VERSN = '012'. "Plan 12 = RA Authorization
CASE BPGE-VORGA.
WHEN 'KSTR'. "KSTR = Revenue level
ETAB-X_P12R = ETAB-X_P12R - BPGE-WTGES.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_P12C = ETAB-X_P12C + BPGE-WTGES.
ENDCASE.
ENDIF.
Authorization (Revenue & Cost plan 13) Plan 13
IF BPGE-VERSN = '013'. "Plan 13 = RA Authorization
CASE BPGE-VORGA.
WHEN 'KSTR'. "KSTR = Revenue level
ETAB-X_P13R = ETAB-X_P13R - BPGE-WTGES.
WHEN 'KSTP'. "KSTP = Cost level
ETAB-X_P13C = ETAB-X_P13C + BPGE-WTGES.
ENDCASE.
ENDIF.
endif.
ENDSELECT. "BPGE
ENDIF. "end of if prps-stufe eq 1. top-level WBS element
COSP Table (External Postings) Awards
COSP Table (External Postings) Billed Sales
COSP Table (External Postings) DPC's & Legacy Load
SELECT * FROM COSP
WHERE OBJNR = PRPS-OBJNR AND
GJAHR LE YEAR
AND (
( kstar = '0000400999' and "old CE for Award $
( KSTAR BETWEEN '0000400990' AND '0000400999' AND
VERSN = '011' AND "11 = Award
WRTTP = '01' ) "01 = Planned
OR ( ( KSTAR BETWEEN '0000400001' AND '0000400989' OR
KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
WRTTP = '04' ) "04 = Actuals
OR ( ( KSTAR BETWEEN '0000998001' AND '0000998010' OR
KSTAR BETWEEN '0000600001' AND '0000601999' ) AND
WRTTP = '04' ) "04 = Actuals
*------- Awards
if cosp-kstar = '0000400999' and "old 400999 = Awards
IF COSP-KSTAR BETWEEN '0000400990' AND '0000400999' AND
COSP-VERSN = '011' AND "11 = Award
COSP-WRTTP = '01'. "01 = Planned
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_AWRD = ETAB-X_AWRD + <MNT>.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_AWRD = ETAB-X_AWRD +
COSP-WKG001 + COSP-WKG002 +
COSP-WKG003 + COSP-WKG004 +
COSP-WKG005 + COSP-WKG006 +
COSP-WKG007 + COSP-WKG008 +
COSP-WKG009 + COSP-WKG010 +
COSP-WKG011 + COSP-WKG012 +
COSP-WKG013 + COSP-WKG014 +
COSP-WKG015 + COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Billed Sales
IF ( COSP-KSTAR BETWEEN '0000400001' AND '0000400989' OR
COSP-KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
COSP-WRTTP = '04'.
"0000999001 = ITD Sales
"0000999003 = ITD Billed Revenue
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDB = ETAB-X_ITDB - <MNT>.
ETAB-X_YTDB = ETAB-X_YTDB - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHB = ETAB-X_MTHB - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_ITDB = ETAB-X_ITDB -
COSP-WKG001 - COSP-WKG002 -
COSP-WKG003 - COSP-WKG004 -
COSP-WKG005 - COSP-WKG006 -
COSP-WKG007 - COSP-WKG008 -
COSP-WKG009 - COSP-WKG010 -
COSP-WKG011 - COSP-WKG012 -
COSP-WKG013 - COSP-WKG014 -
COSP-WKG015 - COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- DPC's & Legacy Load
IF ( COSP-KSTAR BETWEEN '0000998001' AND '0000998010' OR
COSP-KSTAR BETWEEN '0000600001' AND '0000601999' ) AND
COSP-WRTTP = '04'.
IF YEAR = COSP-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSP-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSP-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSP-WKG001 + COSP-WKG002 +
COSP-WKG003 + COSP-WKG004 +
COSP-WKG005 + COSP-WKG006 +
COSP-WKG007 + COSP-WKG008 +
COSP-WKG009 + COSP-WKG010 +
COSP-WKG011 + COSP-WKG012 +
COSP-WKG013 + COSP-WKG014 +
COSP-WKG015 + COSP-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
ENDSELECT.
COOI Table (Commitments) commitments for the WBS elements
SELECT * FROM COOI
WHERE OBJNR = PRPS-OBJNR.
ETAB-X_COMM = ETAB-X_COMM + COOI-WTGBTR.
ENDSELECT.
COSS Table (External Postings) G&A on Commitments
COSS Table (External Postings) Shared Billed Sales
COSS Table (External Postings) Shared DPC's
COSS Table (External Postings) Salary,ESE,OH, & G&A
SELECT * FROM COSS
WHERE
( OBJNR = PRPS-OBJNR AND
WRTTP = '22' ) "G&A on Commitments
OR
( OBJNR = PRPS-OBJNR AND
GJAHR LE YEAR AND
WRTTP = '04' AND "04 = Actuals
( "Shared Billed Sales
( KSTAR BETWEEN '0000400001' AND '0000400989' OR
KSTAR BETWEEN '0000999001' AND '0000999003' )
OR "Shared DPC's
( KSTAR BETWEEN '0000600001' AND '0000601999' )
OR "Salary,ESE,OH, & G&A
( ( KSTAR BETWEEN '0000001000' AND '0000001999' OR
KSTAR BETWEEN '0000002100' AND '0000002199' OR
KSTAR BETWEEN '0000002500' AND '0000002599' OR
KSTAR BETWEEN '0000002800' AND '0000002899' ) )
and parob not like 'PR%' ) "commented out on 4/19/2000
*------- G&A on Commitments (NOTE: data is always as of the RUN date)
IF COSS-WRTTP = '22'.
ETAB-X_COMM = ETAB-X_COMM +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ENDIF.
*------- Shared Billed Sales
IF ( COSS-KSTAR BETWEEN '0000400001' AND '0000400989' OR
COSS-KSTAR BETWEEN '0000999001' AND '0000999003' ) AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDB = ETAB-X_ITDB - <MNT>.
ETAB-X_YTDB = ETAB-X_YTDB - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHB = ETAB-X_MTHB - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDB = ETAB-X_ITDB -
COSS-WKG001 - COSS-WKG002 -
COSS-WKG003 - COSS-WKG004 -
COSS-WKG005 - COSS-WKG006 -
COSS-WKG007 - COSS-WKG008 -
COSS-WKG009 - COSS-WKG010 -
COSS-WKG011 - COSS-WKG012 -
COSS-WKG013 - COSS-WKG014 -
COSS-WKG015 - COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Shared DPC's
IF COSS-KSTAR BETWEEN '0000600001' AND '0000601999' AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
*------- Salary,ESE,OH,& G&A
IF ( COSS-KSTAR BETWEEN '0000001000' AND '0000001999' OR
COSS-KSTAR BETWEEN '0000002100' AND '0000002199' OR
COSS-KSTAR BETWEEN '0000002500' AND '0000002599' OR
COSS-KSTAR BETWEEN '0000002800' AND '0000002899' ) AND
COSS-WRTTP = '04'.
IF YEAR = COSS-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSS-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDC = ETAB-X_ITDC + <MNT>.
ETAB-X_YTDC = ETAB-X_YTDC + <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHC = ETAB-X_MTHC + <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSS-GJAHR.
ETAB-X_ITDC = ETAB-X_ITDC +
COSS-WKG001 + COSS-WKG002 +
COSS-WKG003 + COSS-WKG004 +
COSS-WKG005 + COSS-WKG006 +
COSS-WKG007 + COSS-WKG008 +
COSS-WKG009 + COSS-WKG010 +
COSS-WKG011 + COSS-WKG012 +
COSS-WKG013 + COSS-WKG014 +
COSS-WKG015 + COSS-WKG016.
ELSE.
EXIT.
ENDIF.
ENDIF.
ENDSELECT.
COSB Table (Results from running RA) Unbilled Sales
SELECT * FROM COSB
WHERE OBJNR = PRPS-OBJNR
AND KSTAR BETWEEN '0000003004' AND '0000003005'
"0000003004 = Unbilled Revenue
"0000003005 = Unearned Revenue
AND GJAHR LE YEAR
AND WRTTP = '32'. "32 = Results Analysis
IF YEAR = COSB-GJAHR.
DO.
IF SY-INDEX LE MONTH.
MOVE SY-INDEX TO HLD_INDX.
MNT_INDX = 'COSB-WKGXXX'.
REPLACE 'XXX' WITH HLD_INDX INTO MNT_INDX.
ASSIGN (MNT_INDX) TO <MNT>.
ETAB-X_ITDS = ETAB-X_ITDS - <MNT>.
ETAB-X_YTDS = ETAB-X_YTDS - <MNT>.
IF SY-INDEX = MONTH.
ETAB-X_MTHS = ETAB-X_MTHS - <MNT>.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
ELSEIF YEAR > COSB-GJAHR.
ETAB-X_ITDS = ETAB-X_ITDS -
COSB-WKG001 - COSB-WKG002 -
COSB-WKG003 - COSB-WKG004 -
COSB-WKG005 - COSB-WKG006 -
COSB-WKG007 - COSB-WKG008 -
COSB-WKG009 - COSB-WKG010 -
COSB-WKG011 - COSB-WKG012 -
COSB-WKG013 - COSB-WKG014 -
COSB-WKG015 - COSB-WKG016.
ELSE.
EXIT.
ENDIF.
ENDSELECT.
ENDSELECT. "End of WBS records (from PRPS) for project
Get Total Sales by adding Billed Sales to Unbilled Sales.
ETAB-X_ITDS = ETAB-X_ITDS + ETAB-X_ITDB.
ETAB-X_YTDS = ETAB-X_YTDS + ETAB-X_YTDB.
ETAB-X_MTHS = ETAB-X_MTHS + ETAB-X_MTHB.
IF HOLD_PRART IN EXTRTYP. "Matches the user requested project type
IF OPT1 EQ 'X' OR "All projects
( OPT2 EQ 'X' AND "Only active projects
ETAB-X_STAT NE 'TECO' AND
ETAB-X_STAT NE 'CLSD' ).
TOTAL_AWARD = TOTAL_AWARD + ETAB-X_AWRD.
TOTAL_AUTHR12 = TOTAL_AUTHR12 + ETAB-X_P12R .
TOTAL_AUTHC12 = TOTAL_AUTHC12 + ETAB-X_P12C.
TOTAL_AUTHR13 = TOTAL_AUTHR13 + ETAB-X_P13R.
TOTAL_AUTHC13 = TOTAL_AUTHC13 + ETAB-X_P13C.
TOTAL_ITDSALES = TOTAL_ITDSALES + ETAB-X_ITDS.
TOTAL_ITDCOSTS = TOTAL_ITDCOSTS + ETAB-X_ITDC.
TOTAL_YTDSALES = TOTAL_YTDSALES + ETAB-X_YTDS.
TOTAL_YTDCOSTS = TOTAL_YTDCOSTS + ETAB-X_YTDC.
TOTAL_MTHSALES = TOTAL_MTHSALES + ETAB-X_MTHS.
TOTAL_MTHCOSTS = TOTAL_MTHCOSTS + ETAB-X_MTHC.
TOTAL_ITDBILLED = TOTAL_ITDBILLED + ETAB-X_ITDB.
TOTAL_YTDBILLED = TOTAL_YTDBILLED + ETAB-X_YTDB.
TOTAL_MTHBILLED = TOTAL_MTHBILLED + ETAB-X_MTHB.
TOTAL_COMMITMENT = TOTAL_COMMITMENT + ETAB-X_COMM.
PERFORM SHIFT_SIGN.
APPEND ETAB. "Write data to internal table
CLEAR ETAB.
COUNT_PROJECTS = COUNT_PROJECTS + 1. "Count # of Projects
ENDIF.
ENDIF.
ENDSELECT.
ENDSELECT. "End of Projects from PROJ table
PERFORM GRAND_TOTALS.
SORT ETAB BY X_BU X_PROJ.
ETAB-X_BU = 'BU'.
ETAB-X_CNTR = 'PrftCntr'.
ETAB-X_PROJ = 'Proj'.
ETAB-X_CREP = 'Contract Mgr'.
ETAB-X_BDREP = 'Account Mgr'.
ETAB-X_GRPH = 'Technical Lead'.
ETAB-X_ACTREP = 'Key Person1'.
ETAB-X_PMGR = 'Program Mgr'.
ETAB-X_TTLE = 'Title'.
ETAB-X_CLNT = 'Client'.
ETAB-X_POCN = 'Contract #'.
ETAB-X_TYPE = 'Type'.
ETAB-X_OPEN = 'Open'.
ETAB-X_CLOSE = 'Close'.
ETAB-X_CGT = 'CGT'.
ETAB-X_DISTR = 'DC'.
ETAB-X_CONTR = 'Contr%'.
ETAB-X_AWRD = 'Award'.
ETAB-X_P12R = 'Auth12 Sales'.
ETAB-X_P12C = 'Auth12 Cost'.
ETAB-X_P13R = 'Auth13 Sales'.
ETAB-X_P13C = 'Auth13 Cost'.
ETAB-X_ITDS = 'ITD Sales'.
ETAB-X_ITDC = 'ITD Costs'.
ETAB-X_YTDS = 'YTD Sales'.
ETAB-X_YTDC = 'YTD Costs'.
ETAB-X_MTHS = 'Mth Sales'.
ETAB-X_MTHC = 'Mth Costs'.
ETAB-X_ITDB = 'ITD Billed'.
ETAB-X_YTDB = 'YTD Billed'.
ETAB-X_MTHB = 'Mth Billed'.
ETAB-X_COMM = 'Commitments'.
ETAB-X_STAT = 'Status'.
INSERT ETAB INDEX 1. "Write a report header line to internal table
CLEAR ETAB.
CALL FUNCTION 'Z_RH_START_EXCEL_DATA_OLE'
EXPORTING
data_name = 'C:\WINNT\Profiles\cbraswell\Desktop\TestTemp.xlt'
DATA_NAME = 'ZSales.XLS'
DATA_PATH_FLAG = 'W'
DATA_TYPE = 'DAT'
DATA_BIN_FILE_SIZE = 'ZSales'
CHART_TITLE = 'ZSales'
CHART_TYPE = 2
CATEGORY_TITLE = 'ZSales'
VALUE_TITLE = 'ZSales'
DATA_XTOP_COR = 0
DATA_YTOP_COR = 0
DATA_XBOT_COR = 0
DATA_YBOT_COR = 0
CATEGORY_XTOP_COR = 0
CATEGORY_YTOP_COR = 0
CATEGORY_XBOT_COR = 0
CATEGORY_YBOT_COR = 0
TABLES
DATA_TAB = ETAB
EXCEPTIONS
NO_BATCH = 1
DOWNLOAD_ERROR = 2
INVALID_TYPE = 3
INTERNAL_ERROR = 4
NO_OLE_SUPPORT = 5
OLE_FILE_ERROR = 6
OLE_ERROR = 7
NO_DATA = 8
COORDINATE_ERROR = 9
OTHERS = 10.
Negative # sign in the front of number for downloading to Excel
FORM SHIFT_SIGN.
IF ETAB-X_AWRD CA '-'. SHIFT ETAB-X_AWRD RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P12R CA '-'. SHIFT ETAB-X_P12R RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P12C CA '-'. SHIFT ETAB-X_P12C RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P13R CA '-'. SHIFT ETAB-X_P13R RIGHT CIRCULAR. ENDIF.
IF ETAB-X_P13C CA '-'. SHIFT ETAB-X_P13C RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDS CA '-'. SHIFT ETAB-X_ITDS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDIC CA '-'. SHIFT ETAB-X_ITDIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDC CA '-'. SHIFT ETAB-X_ITDC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDS CA '-'. SHIFT ETAB-X_YTDS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDC CA '-'. SHIFT ETAB-X_YTDC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDIC CA '-'. SHIFT ETAB-X_YTDIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHS CA '-'. SHIFT ETAB-X_MTHS RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHC CA '-'. SHIFT ETAB-X_MTHC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHIC CA '-'. SHIFT ETAB-X_MTHIC RIGHT CIRCULAR. ENDIF.
IF ETAB-X_ITDB CA '-'. SHIFT ETAB-X_ITDB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_YTDB CA '-'. SHIFT ETAB-X_YTDB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_MTHB CA '-'. SHIFT ETAB-X_MTHB RIGHT CIRCULAR. ENDIF.
IF ETAB-X_COMM CA '-'. SHIFT ETAB-X_COMM RIGHT CIRCULAR. ENDIF.
ENDFORM.
FORM GRAND_TOTALS.
SKIP 1. .
WRITE: / '----
WRITE: / 'System ID = ', SY-SYSID,
/ 'Client = ', SY-MANDT,
/ 'User = ', SY-UNAME,
/ 'Date of data extract = ', SY-DATUM ,
/ 'Number of Projects = ', COUNT_PROJECTS,
/ 'total Award (Plan 11) = ', TOTAL_AWARD,
/ 'total Auth SalesHi all,
Iam really waiting for someone to see and get the logic right for this code.Iam completely stuck up. i need ur help
Thanks -
Financial Report Error: Required application module reporting.reportViewer
Hi,
When I select the Financial Report on workspace; I have an error as below. Do you have any sugesstions?
Error: Required application module reporting.reportViewer is not configured.
Warning: A 'Authorization Required' error occurred communicating with the server.
Details:
URI: http://10.6.82.135:19000/hr/xml/HRConfig.jsp
Status: 401 - Authorization Required
Content: text/html; charset=UTF-8
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Draft//EN">
<HTML>
<HEAD>
<TITLE>Error 401--Unauthorized</TITLE>
<META NAME="GENERATOR" CONTENT="WebLogic Server">
</HEAD>
<BODY bgcolor="white">
<FONT FACE=Helvetica><BR CLEAR=all>
<TABLE border=0 cellspacing=5><TR><TD><BR CLEAR=all>
<FONT FACE="Helvetica" COLOR="black" SIZE="3"><H2>Error 401--Unauthorized</H2>
</FONT></TD></TR>
</TABLE>
<TABLE border=0 width=100% cellpadding=10><TR><TD VALIGN=top WIDTH=100% BGCOLOR=white><FONT FACE="Courier New"><FONT FACE="Helvetica" SIZE="3"><H3>From RFC 2068 <i>Hypertext Transfer Protocol -- HTTP/1.1</i>:</H3>
</FONT><FONT FACE="Helvetica" SIZE="3"><H4>10.4.2 401 Unauthorized</H4>
</FONT><P><FONT FACE="Courier New">The request requires user authentication. The response MUST include a WWW-Authenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11.</FONT></P>
</FONT></TD></TR>
</TABLE>
</BODY>
</HTML>
Edited by: ankist on Jan 27, 2012 3:28 PMHi,
I have started FR Web Application service after I have error statement in "FRLogging" log files as below;
[2012-01-31T14:33:32.725+02:00] [FinancialReporting0] [ERROR] [] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JKnkMRG9TcCLzE^AyW1F9xyN000000,0:3] [SRC_CLASS: com.hyperion.reporting.util.MessageHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: getMessage] [[
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CONFIG.NAME.PrintInstanceInBookCount
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getObject(ResourceBundle.java:371)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at com.hyperion.reporting.util.MessageHelper.getMessage(Unknown Source)
at com.hyperion.reporting.util.MessageHelper.getMessage(Unknown Source)
at com.hyperion.reporting.config.FRConfig$FRProperty.<init>(Unknown Source)
at com.hyperion.reporting.config.FRConfig.initializeProperties(Unknown Source)
at com.hyperion.reporting.config.FRConfig.<init>(Unknown Source)
at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
at com.hyperion.reporting.config.MBeanConfig.register(Unknown Source)
at com.hyperion.reporting.webviewer.HRContextListener.contextInitialized(Unknown Source)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
[2012-01-31T14:33:32.744+02:00] [FinancialReporting0] [ERROR] [] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JKnkMRG9TcCLzE^AyW1F9xyN000000,0:3] [SRC_CLASS: com.hyperion.reporting.util.MessageHelper] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: getMessage] [[
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key CONFIG.DESC.PrintInstanceInBookCount
at java.util.ResourceBundle.getObject(ResourceBundle.java:374)
at java.util.ResourceBundle.getObject(ResourceBundle.java:371)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at com.hyperion.reporting.util.MessageHelper.getMessage(Unknown Source)
at com.hyperion.reporting.util.MessageHelper.getMessage(Unknown Source)
at com.hyperion.reporting.config.FRConfig$FRProperty.<init>(Unknown Source)
at com.hyperion.reporting.config.FRConfig.initializeProperties(Unknown Source)
at com.hyperion.reporting.config.FRConfig.<init>(Unknown Source)
at com.hyperion.reporting.config.FRConfig.getFRConfig(Unknown Source)
at com.hyperion.reporting.config.MBeanConfig.register(Unknown Source)
at com.hyperion.reporting.webviewer.HRContextListener.contextInitialized(Unknown Source)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:485)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:637)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
[2012-01-31T14:33:33.679+02:00] [FinancialReporting0] [NOTIFICATION] [] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JKnkMRG9TcCLzE^AyW1F9xyN000000,0:3] [SRC_CLASS: com.hyperion.reporting.preferenes.PrefsServlet] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: init] Preferences servlet initialized
[2012-01-31T14:33:36.313+02:00] [FinancialReporting0] [NOTIFICATION] [00043] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JKnkMRG9TcCLzE^AyW1F9xyN000000,0:3] [SRC_CLASS: com.hyperion.reporting.webviewer.FRServiceReporting] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: init] Initializing and starting Financial Reporting Reporting Service
[2012-01-31T14:33:36.329+02:00] [FinancialReporting0] [ERROR] [] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JKnkMRG9TcCLzE^AyW1F9xyN000000,0:3] [SRC_CLASS: com.hyperion.reporting.hsserver.impl.HsServer] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: main] [[
java.lang.NoClassDefFoundError: com/hyperion/ap/adm/HssAdm
at com.hyperion.reporting.hsserver.impl.HsServer.getHsServer(Unknown Source)
at com.hyperion.reporting.hsserver.impl.HsServer.main(Unknown Source)
at com.hyperion.reporting.webviewer.FRServiceReporting.init(Unknown Source)
at javax.servlet.GenericServlet.init(GenericServlet.java:241)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
[2012-01-31T14:33:36.331+02:00] [FinancialReporting0] [NOTIFICATION] [00047] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JKnkMRG9TcCLzE^AyW1F9xyN000000,0:3] [SRC_CLASS: com.hyperion.reporting.webviewer.FRServiceScheduler] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: init] Financial Reporting Scheduler Service initialized
[2012-01-31T14:33:36.420+02:00] [FinancialReporting0] [WARNING] [00205] [oracle.EPMFR.core] [tid: Thread-32] [userId: <anonymous>] [ecid: 0000JKnkMRG9TcCLzE^AyW1F9xyN000000,1:32056] [SRC_CLASS: com.hyperion.reporting.scheduler.SchedulerServerLauncher$1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: run] Scheduler not ready to publish itself. Retry in 1 minutes.
[2012-01-31T14:33:36.422+02:00] [FinancialReporting0] [NOTIFICATION] [00035] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JKnkMRG9TcCLzE^AyW1F9xyN000000,0:3] [SRC_CLASS: com.hyperion.reporting.webviewer.FRServiceADM] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: init] Initializing Financial Reporting Analytic Data Model Service
[2012-01-31T14:33:36.423+02:00] [FinancialReporting0] [ERROR] [00036] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JKnkMRG9TcCLzE^AyW1F9xyN000000,0:3] [SRC_CLASS: com.hyperion.reporting.webviewer.FRServiceADM] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_METHOD: init] Failure to initialize Financial Reporting Analytic Data Model Service[[
java.lang.NoClassDefFoundError: com/hyperion/ap/adm/HssAdm
at com.hyperion.reporting.webviewer.FRServiceADM.init(Unknown Source)
at javax.servlet.GenericServlet.init(GenericServlet.java:241)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Edited by: ankist on Jan 31, 2012 2:47 PM -
Required application module reporting.HRRunDlg is not configured. Please co
Hi,
I did the 9.3.1 REPORTING ANANLYSIS installation and then applied 9.3.3 patches,
when i am trying to use reports in workspace it is throwing the below error:
Required application module reporting.HRRunDlg is not configured. Please contact your administrator.
I tried restaring and rebooting ,killing java.exe services, still it givng the error, it is bit urgent,
Can some one please respond on this?
Thanks,
msr.That usually means either FR is not running or the Web Server is having trouble connecting.
Do either of these links work:
Direct
http://frserver:8200/hr/modules/com/hyperion/reporting/web/common/HRCore.js
Through web server:
http://websvr:19000/hr/modules/com/hyperion/reporting/web/common/HRCore.js
If neither work - then check the FR logs
If 8200 works and not 19000 you might try reconfiguring your web server using the config utility. And check the web server configuration.
Nick -
CSM Modules and Server availability project
I have 2 geographically separated sites, site A in the main office and site B is the Disaster recovery office. These 2 sites are connected by a high speed Layer 3 link (10Gb), The goal is to have duplicate servers available in site B in the event of partial server failure in site A or even complete failure of site A. Can I accomplished this with the CSM modules given that these servers will be in different networks and overall how would this configuration work, I really appreciate it.
Are you planning to put CSMs in both data centers or a single data center?
If CSM will be at one site (site A) only then
You need to use source NAT on CSM (Assumption: its in Site A) to make sure that the return traffic from servers in "site B"
can go back to the client through CSM at "Site A"
If both Data centers will have their own CSM modules then the best approach is to use GSS or any any Geo redundant setup that can check the load/health/availability/proximity of the VIPs (virtual ips configured on each CSM) in each data center and direct the clients intelligently to the appropriate data center.
Syed Iftekhar Ahmed -
"One or More Modules Reporting an Error"
Hi,
Please give suggestion on this error "One or More Modules Reporting an Error" message.
Snapshot is attached for refrence.
Thanks,
AbuzarAbuzar,
With the netwatch module, if you do not have an interface configured or there is no traffic being seen on the configured interface the module will display this error message. This error can be ignored if you have not yet configured the module and is normal for an unconfigured module.
To correctly configure the module configure a spare interface on your collector with an ip address and either span traffic to that interface or configure a DHCP helper to forward DHCP traffic to that interface.
--Jesse -
A module reported an error 0x80004005 from call back which was running as part of rule
Hi
a module reported an error 0x80004005 from call back which was running as part of rule. with event id 4503this error shown since delta monitor is enable!thanksHi,
What is your SCOM version, would you please try to install the newest update, and check the result.
And here is a similar thread, please refer to it:
http://social.technet.microsoft.com/Forums/en-US/28516ca3-ae97-49a2-bb72-d6814750813f/scom-warnings-and-errors-event-id-4503-10703-1103-and-10102?forum=exchangesvradminlegacy
Regards,
Yan Li
Regards, Yan Li -
How to count/determine downtime of Cisco 6500 switch?
Hello,
I work with cisco 6500 switches. now we need to evaluate the down time of all switces. now we using cacti to query system information to switches using SNMP, but some times cacti didnt get the data because of high cpu in switch so the switch stop di SNMP service. because of that, the data in Cacti not valid to determine our switch Downtime.
Is there any tools or ather way to monitor Cisco switch downtime??
Thanks a lot.just like a reminding system. it can be send an email or some message.
EEM can be configured to send someone an email when some kind of "event" is triggered, such as an uplink goes DOWN/UP.
However, the chassis can't send an email if it's down but can be configured to send out an email when the supervisor card boots up. -
CSM module: rserver to rserver (or VIP) connections between serverfarms
Hello,
I am trying to audit an existing configuration of CSM module.
Unfortunately have not an experience in CSM module configaration.
The main goal is to understand if there are any direct connection between servers
in different serverfarms (i.e. server from one serfarm opens session to server in
second serverfarm to VIP or to real IP). Also I need to know if there exist any
server initiated connection.
For serverfarms in CSM configuration there are two options configured
1)
nat server
nat client <pool>
2)
nat server
no nat client
As I understand, if there is no "static nat" lines in CSM configuration it means that
there can not be server initiated connections. Is this correct?
What is the best way to check if there are any direct connections between different serverfarms?
Is it enough to take an output of "show conn" command like
prot vlan source destination state
In UDP 149 10.13.205.20:57944 10.36.22.20:23235 ESTAB
Out UDP 449 10.36.22.24:23235 10.13.205.20:57944 ESTAB
and check if there is "In" connection from <source IP> in one serverfarm to <destination IP>
in second serverfarm? As for now I did not see such connections.
Will be presented direct server-server/VIP or server initiated connections in "sh conn" command
output for CSM module?
Could you advise me how to check this in CSM configuration or show commands output?
Thank you in advance.If the vserver to vserver connection is made between devices in the same subnet and the client uses the vsever address (rather than a vip address) then this will not be seen via the CSM at all. If the client vserver targets the vip address, then it is probable that you will require source nat to make it work. If a vserver starts a connection to another vserver addess (not vip) in a different subnet and the connection flows via the CSM, then the CSM will show this in its connection table. You can test this via "telnet " and check the connection table. Any working vserver to vip connections will be visible in the connection table. Matthew
Maybe you are looking for
-
Sort Order of All Unplayed Episodes
The sort order of all unplayed episodes is from Newest to Oldest, which is backwards for me. Why would I listen to the Newest episode first? It completely breaks any chronology of the podcasts! I found that you can change this for individual podcasts
-
Solaris 8 does not recognise second CPU
Hi, my Solaris 8 installation on my E250 does not recognise my second CPU. prtdiag and psrinfo only show one CPU. OBP reports the second has no problem and is online (ASR). It even has the same temperature as the other operating one... Can someone he
-
Source line number in exception trace
Excuse me if the question is silly. When I print the stack trace after an exception has occured, how is it able to display the exact source line number 'cos the source file may or may not be accessible to the jvm. Obviously they don't keep source lin
-
Needing help installing itunes on my iphone
I have downloaded the latest version of itunes on to my computer but i still dont have the itunes icon on my iphone. Help please?
-
Reappearing mach_kernel in my HD folder.
I keep having an app labeled mach_kernel appearing in my HD folder. If I Trash it, I lose the possibility to launch into Safe Mode and have to reinstall to correct it. I do not know what it is or does or where it should be. Name: mach_kernel Kind: