Cisco 69xx missed calls as service URL at feature button

Hi,
can anybody help me to use "Missed Calls" as a service URL (Standard IP phone service) at a Cisco 6941 at a feature button.
As discussed in this thread it should work -> https://supportforums.cisco.com/thread/1003641
I just copied the phone service "Missed Calls" and changed "directory" to "Standard-IP-phoneservice".
The service URL I don`t changed and it`s still "Application:Cisco/MissedCalls".
When I try to use this copied phone service at a Cisco 6941 as a URL I always get back a XML-error.
Is the service URL "Application:Cisco/MissedCalls" still correct when I try to use Missed calls as a Standard IP phoneservice?
The load at the Cisco 6941 is SIP 9.3.3.2.
I also tried with SCCP instead of SIP but still the same error.
BR
Michael

I think I found something. I tried it on CIPC - SCCP, nothing was displayed on the Phone when the button was pressed. Testing with other phone models now.
Here are the instructions if someone else is also intrested:
Adding an IP Phone Service to a Phone Button If you want to do so, you can assign the service to a phone button (a speed dial button) that is configured as a service URL. By default, the IP phone service can display under the Directory, Message, or Services button/options on the phone, depending on your configuration in the IP Phone Services Configuration window, so you only need to add an IP phone service to a phone button if you want the service to display as a speed dial. You can only perform this procedure for IP phone services that are not marked as enterprise subscriptions. Perform the following steps to add a service to a service URL button. Procedure
Add the service to Cisco Unified Communications Manager (see IP Phone Service Configuration Settings).
Customize a phone button template by configuring a Service URL button (see the "Phone Button Template Configuration Settings" section on page 73-1).
Add the customized phone button template to the phone (see the "Configuring Cisco Unified IP Phones" section on page 67-30).
Subscribe the service to the phone (see the "Configuring IP Phone Services" section on page 67-35).
Add the service URL to a phone button (see the "Configuring Service URL Buttons" section on page 67-38).

Similar Messages

Cisco 69xx missed calls as service URL at a feature button

Hi,
can anybody help me to use "Missed Calls" as a service URL (Standard IP phone service) at a Cisco 6941 at a feature button?
Referring to this thread (https://supportforums.cisco.com/thread/1003641) it should work at a Cisco 69xx phone.
I just copied the phone service "Missed Calls" and changed "directory" to "Standard-IP-phoneservice".
The service URL I don`t changed and it`s still "Application:Cisco/MissedCalls".
When I try to use this copied phone service at a Cisco 6941 as a URL at a feature button next to the line-button I always get back a XML-error.
Is the service URL "Application:Cisco/MissedCalls" still correct when I try to use Missed calls as a Standard IP phoneservice?
The load at the Cisco 6941 is SIP 9.3.3.2.
I also tried SCCP instead of SIP but it`s still not working.
BR
Michael

I think I found something. I tried it on CIPC - SCCP, nothing was displayed on the Phone when the button was pressed. Testing with other phone models now.
Here are the instructions if someone else is also intrested:
Adding an IP Phone Service to a Phone Button If you want to do so, you can assign the service to a phone button (a speed dial button) that is configured as a service URL. By default, the IP phone service can display under the Directory, Message, or Services button/options on the phone, depending on your configuration in the IP Phone Services Configuration window, so you only need to add an IP phone service to a phone button if you want the service to display as a speed dial. You can only perform this procedure for IP phone services that are not marked as enterprise subscriptions. Perform the following steps to add a service to a service URL button. Procedure
Add the service to Cisco Unified Communications Manager (see IP Phone Service Configuration Settings).
Customize a phone button template by configuring a Service URL button (see the "Phone Button Template Configuration Settings" section on page 73-1).
Add the customized phone button template to the phone (see the "Configuring Cisco Unified IP Phones" section on page 67-30).
Subscribe the service to the phone (see the "Configuring IP Phone Services" section on page 67-35).
Add the service URL to a phone button (see the "Configuring Service URL Buttons" section on page 67-38).

Missed calls as service url at 6941 doesnt work

hi,
i'm configured the preinstalled phone service "missed calls" from cisco as standard ip phone service and put it at a service url phone button. at a 79xx phone this works fine, i press the button and the "missed call" list appear. if i configure the same at a 6941 phone at first the service doesnt appear at the service list at phone and at second, the service url button is right at the phone, but if i press it, the message "Error!: services unavailable" appears.
CUCM is 7.1.3
phone loads for 6941 is 8.5.3
somebody can help?

I think I found something. I tried it on CIPC - SCCP, nothing was displayed on the Phone when the button was pressed. Testing with other phone models now.
Here are the instructions if someone else is also intrested:
Adding an IP Phone Service to a Phone Button If you want to do so, you can assign the service to a phone button (a speed dial button) that is configured as a service URL. By default, the IP phone service can display under the Directory, Message, or Services button/options on the phone, depending on your configuration in the IP Phone Services Configuration window, so you only need to add an IP phone service to a phone button if you want the service to display as a speed dial. You can only perform this procedure for IP phone services that are not marked as enterprise subscriptions. Perform the following steps to add a service to a service URL button. Procedure
Add the service to Cisco Unified Communications Manager (see IP Phone Service Configuration Settings).
Customize a phone button template by configuring a Service URL button (see the "Phone Button Template Configuration Settings" section on page 73-1).
Add the customized phone button template to the phone (see the "Configuring Cisco Unified IP Phones" section on page 67-30).
Subscribe the service to the phone (see the "Configuring IP Phone Services" section on page 67-35).
Add the service URL to a phone button (see the "Configuring Service URL Buttons" section on page 67-38).

URL of the WSDL document missing from Enterprise Service

Hi,
my scenario is BW==>PI==>CRM7.0. where CRM is a service provider.
In transaction SPROXY in CRM I can see the service I need, but under WSDL tab I can only find wsdl definition without the URL address. Service does not come in any SOAmanager screen either.
I need to call this service from PI, but without URL can't create Communication Channel.
Is there anything that can be done about it? Anything I've missed?
Since this is a pre ramp-up release I contacted SAP but I'm still waiting for their answer.
Maybe someone had similar problem and knows the answer, any suggestions will be appreciated.
Regards,
Krystyna Rokicka

Hello,
In that case, you need to create an XI adapter comm channel that will point to the CRM system (not really sure if there are other approaches, but this one is working for us). You could try this config:
Host: CRMhostname/IP
Port: CRM port
Path: /sap/xi/engine?type=entry
Let me know if this works,
Mark

Can we call Endpoint URI as service url in proxy service

Hi folks,
Can we call the web service url as the endpoint uri while configuring proxy service ?
eg: 10.16.220.144/ABCD as the endpoint uri in proxy service ?
If yes...then plese give me the steps.
thanks,
salil

The endpoint URI is the endpoint relative to the OSB managed server, to call it from external you use http://hostname:7002/my/path/myService as endpoint...
You can see the WSDL by typing http://hostname:7002/my/path/myService?wsdl in a browser...
hostname = your hostname
7001 = port where the OSB managed server is listening
/my/path/myService is whatever is configured as endpoint URI of your proxy service
Cheers,
Vlad

Getting missed call alert while Data services is ON

dear team,
It has been observed in my BB Z30 that whenever i make "ON - Mobile Data services", the person who are calling to me getting "Not Reachable announcement" the same tested by me also by using my another number.I am getting Missed called alert sms for same.
Please help me if any setting i have to make.
Solved!
Go to Solution.

Being a corporate SIM card, your employer should be able to make the swap very very easy.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

WebServiceException while calling the service :No WSDL URL

Hi,
I am facing the below issue.I created the deployable proxy(generate ejb skeleton) and client application by(generate client) with the imported WSDL from ESR.
I tried many times without any luck do u know whats the issues?
Caused by: javax.xml.ws.WebServiceException: No WSDL URL is specified for service [class com.mt.pi.bo.gl.mdm.distributemasterdata.DistributeMasterDataService] on service creation.
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.<init>(SAPServiceDelegate.java:111)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createDelegate(CTSProvider.java:170)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createServiceDelegate(CTSProvider.java:151)
at javax.xml.ws.Service.<init>(Service.java:57)
at com.mt.pi.bo.gl.mdm.distributemasterdata.DistributeMasterDataService.<init>(DistributeMasterDataService.java:14)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at java.lang.Class.newInstance0(Class.java:350)
at java.lang.Class.newInstance(Class.java:303)
at com.sap.engine.interfaces.webservices.server.wsclient.ServiceObjectFactory.getObjectInstance(ServiceObjectFactory.java:75)
at com.sap.engine.lib.injection.ReferenceObjectFactory.getObject(ReferenceObjectFactory.java:65)
at com.sap.engine.lib.injection.FieldInjector.inject(FieldInjector.java:113)
... 44 more
Regards
Sabari

Does the imported WSDL web service connect to the back end system? Was XI configured to call that service? Or is that a service exposed by ECC directly? Just importing a WSDL might not work without making the required connections between the associated systems.
VJ

UC540 - Flip to a Camera Service URL from Incoming Call

I have a client who says he has seen this before on a UC520 w/ 7975s, and he wants it repliated on his UC540 w/ 7975s. i.e. an incoming phone call from an access gate on an FXO port would cause the phone to ring, and force a page flip to a services URL or some oher mechanism where the camera is visible (Axis camera server that is then converting the images to PNG via a realtime script on a Unix host).
I know that cameras can be viewed at the services URL using a conversion method to PNG as above, but to the best of my knowledge you can't force the phone to flip automatically, or replace the background image automatically based on an incoming call.... Can somebody please confirm, or if it is now possible, explain the steps.

If that was done with CTI or TAPI and phone SDK, etc as custom application, yes it's possible. You would have to contact the author to know about the details, or start from almost zero to replicate it yourself.

(EWS) How to call autodiscover URL to retrieve exchange service URL?

Hi Folks,
I have some code that finds the autodiscover url by searching on the SCP. What I would like to do is then call the auto discover service at that location to determine the URL of the ExchangeService for making EWS calls.
The examples I can find in the MS documentation use an email address (ExchangeService.AutoDiscoverURL and GetUserSettingsResponse).
What I would like to do is call the service located at the address given by the SCP and then set the ExchangeService.Url property.
I am aware that I need to use the ASUrl property of the AutoDiscover Response (POX), however, I do not seem to be able to find any information on how to make the request (using C#) and how to retrieve the response.
Regards
Andy

You can use the Autodiscover classes to do an Autodiscover against your SCP endpoint (although I don't really see the point when you use AutoDiscoverURL it will do a SCP lookup first anyway?).
eg to use the Autodiscover class you can use
adAutoDiscoverService.Url = new Uri(" https://autodiscover-s.outlook.com/autodiscover/autodiscover.svc");
adAutoDiscoverService.Credentials = new NetworkCredential(UserName,Password);
adAutoDiscoverService.EnableScpLookup = false;
adAutoDiscoverService.RedirectionUrlValidationCallback = adAutoDiscoCallBack;
adAutoDiscoverService.PreAuthenticate = true;
GetUserSettingsResponse adResponse = adAutoDiscoverService.GetUserSettings(Identity, (new UserSettingName[1] { UserSettingName.ExternalEwsUrl }));
if (adResponse.Settings.Count >= 1)
String exClientURL = (String)adResponse.Settings[UserSettingName.ExternalEwsUrl];
CASURL = exClientURL;
This will do a SOAP Autodiscover rather then POX if you want to do a POX discover you can do something like
String EWSURL = null;
String auDisXML = "<Autodiscover xmlns=\"http://schemas.microsoft.com/exchange/autodiscover/outlook/requestschema/2006\"><Request>" +
"<EMailAddress>" + Identity + "</EMailAddress>" +
"<AcceptableResponseSchema>http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a</AcceptableResponseSchema>" +
"</Request>" +
"</Autodiscover>";
System.Net.HttpWebRequest adAutoDiscoRequest = (System.Net.HttpWebRequest)System.Net.HttpWebRequest.Create(adURL);
adAutoDiscoRequest.ContentType = "text/xml";
adAutoDiscoRequest.Headers.Add("Translate", "F");
adAutoDiscoRequest.Method = "Post";
adAutoDiscoRequest.Credentials = NetCredential;
byte[] bytes = Encoding.UTF8.GetBytes(auDisXML);
adAutoDiscoRequest.ContentLength = bytes.Length;
Stream rsRequestStream = adAutoDiscoRequest.GetRequestStream();
rsRequestStream.Write(bytes, 0, bytes.Length);
rsRequestStream.Close();
WebResponse adResponse = adAutoDiscoRequest.GetResponse();
Stream rsResponseStream = adResponse.GetResponseStream();
XmlDocument reResponseDoc = new XmlDocument();
reResponseDoc.Load(rsResponseStream);
String EWSURL = "";
XmlNodeList pfProtocolNodes = reResponseDoc.GetElementsByTagName("Protocol");
foreach (XmlNode xnNode in pfProtocolNodes)
XmlNodeList adChildNodes = xnNode.ChildNodes;
foreach (XmlNode xnSubChild in adChildNodes)
switch (xnSubChild.Name)
case "ASUrl": EWSURL = xnSubChild.InnerText;
break;
Cheers
Glen

Calling a service via url when it has result set INPUT

So i am trying to call this service via a javascript
# Add users
@Properties LocalData
IdcService=ADD_USER
dName=jsmith
dUserAuthType=Local
dFullName=Jennifer Smith
dPassword=password
dEmail=[email protected]
@end
@ResultSet UserAttribInfo
2
dUserName
AttributeInfo
jsmith
role,contributor,15
@end
<<EOD>>
so i make a call using
/idc/?IdcService=ADD_USER&dName=jsmith&dUserAuthType=Local&dFullName=Jennifer Smith&dPassword=password&dEmail=[email protected]
but how to get the result set UserAttribInfo added to the end of this

Jason,
Thanks for the good info. Based on your technique I was able to figure out how to do a pure json post of a result set. You just need to send a Content-Type of text/json, set IsJson=1 and send the data encoded in the request body in the following format:
    LocalData: {
        dName: 'user',
        dUserAuthType: 'Local'
    ResultSets: {
        UserAttribInfo: {
            fields: ['dName', 'AttributeInfo'],
            rows: [['user', 'role, guest, 15']]
}

Error calling web service from Adobe form

Hi Experts,
While calling web service form my adobe form, i was getting an error as below saying "Error attempting to read from the file" followed by the URL of my web service.
To create the above scenario i followed the following steps:
1. Create a Function module and create a web service from that function module.
2. Through SOAMANAGER, download the WSDL file for the generated web service.
3. Create an Adobe form with an empty Interface and create a new Data Connection on the form using the downloaded WSDL.
4. Generate this adobe form using an ABAP report.
Kindly extend help on this to figure out if I'm missing something!!!

Well questions related to Web Services have been answered here in past, please Search on SCN for links to it.

Adding prefix to Missed calls

Hi
Please Help me out here . My client wants to redial numbers coming in missed calls and received calls but calls are drooping when redialed.This is because number which shows on cisco phones is either 9XXXXXXXXX(LOCAL CELL PHONES) or 22XXXXXXXX but
Route Patterns ACTIVE as of now on CUCM:
0.[2-6]XXXXXXX -Local PSTN
0.[7-9]XXXXXXXXX -LOCAL CELL PHONES
I reffered few forums Disscussion and links but they are very confusing . We are using H323 AND MGCP (we want it on Priority) gateway where E1s terminated.
Please Suggest at earliest ,I Hope to resolve this soon with your help.
Regards

Option 1: Goto Service Parameters - Select the Server - Select Services Cisco CallManager - Click on Advanced, Now search for Incoming Calling Party National Number Prefix - MGCP and add your access code (9) which you use for dialing outside.
for H323 gateway:
voice translation-rule 1
rule 1 /^/ /90/ type national national
voice translation-profile incmng
translate calling 1
You can apply this translation profile to voice port (E1) or dial peer.
Suresh
Suresh

How request the service URL automatically?

Hi, Everyone,
How can I let the 79** serials phone auto request the service URL without user press the 'Services' button?
(Except using 'IDLE & IDLE Timeout')
BTW, base on this idea, i'm try to using the push2phone application (ASP) which is in CiscoIPService SDK, but i'm failed;
Trace the codes, i'm found the problem is in the 'getDeviceList()', see the symbol("-->") marked:
function getDeviceList(callManager, userID, password, protocol)
// [callManager: *.*.*.*] [UserID: "pusher"] [password: "pusher"] [protocol: "https"]
var authstring = text2base64(userID + ":" + password);
var xmlhttp = new ActiveXObject("Msxml2.XMLHTTP.3.0");
var xmlDoc = new ActiveXObject("Msxml2.FreeThreadedDOMDocument.3.0");
xmlDoc.async = false;
xmlhttp.Open("GET", protocol + "://" + callManager + "/CCMAdmin/Reports/devicelistx.asp", false);
xmlhttp.setRequestHeader("Authorization", "Basic " + authstring);
xmlhttp.setRequestHeader("Connection", "close");
--> xmlhttp.Send(); // Error occured
--> xmlDoc.loadXML(xmlhttp.responseText);
--> Application("deviceList") = xmlDoc; // Application("deviceList") is NULL

Hi, Remy, Thank you for your reply:)
About my CCM:
CCM System version: 4.1(3)
CCM Administration version: 4.1(0.11)
You say:
"You have to know taht since CCM 4.1.3 the devicelistx is no longer supported.
The page is always present but no longer supported by cisco. "
Is that meaning i cannot call the function 'getDeviceList()' in this CCM version and subsequent?!
(Yes, i can access the devicelistx.asp by: "https://*.*.*.*/ccmadmin/Reports/devicelistx.asp")
On the other hand, I try to call the 'phonepush()' directly, it looks like:
<%@ Language=JavaScript %>
<%
function phonePush(phoneIP, URI, userID, password)
// URI: Spec service URL, such as: http://*.*.*.*/CIP/index.asp
var authstring = text2base64(userID + ":" + password);
var xmlhttp = new ActiveXObject("Msxml2.XMLHTTP");
var pushxml;
pushxml = "";
pushxml = "XML=" + Server.URLEncode(pushxml);
xmlhttp.Open("POST", "http://" + phoneIP + "/CGI/Execute", false);
xmlhttp.setRequestHeader("Authorization", "Basic " + authstring);
xmlhttp.setRequestHeader("Connection", "close");
xmlhttp.setRequestHeader("Content-type", "application/x-www-form-urlencoded");
xmlhttp.Send(pushxml);
return xmlhttp.responseText;
phonePush(phoneIP, URI, userID, password); // calling
%>
But it has not succeeded:( Is that can works well?! Or is there has anyway that can perform the automation?
Thanks!!!

Calling web service from oracle forms 10g

Problem Description:
I'm following the steps as per the doc:
http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
WSDL for external web service used is http://gend:83/DesignService.svc?wsdl
The service was developed by us.
Calling the web service using JDeveloper works fine but when I complie in Oracle Forms it returns wrong number of types of arguments in call SENDHELLO.
The code from oracle form to call web service is as below:
DECLARE
jo ora_java.jobject;
xo ora_java.jobject;
rv varchar2(2000);
ex ora_java.jobject;
str varchar2(100);
BEGIN
jo := GendServiceClient.new;
rv := GendServiceClient.sendHello('Nora');
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
message(Exception_.toString(ex));
END;
Any help/ideas on this is greatly appreciated. Thanks.
Edited by: KE Nora Loera on Jun 1, 2012 1:24 PM

My primary skill is PL/SQL but the only information I found on Oracle's site to call a web service from a 10g Form was creating a jar file and importing the java class. Since I don't want to ask our corporate IT to make changes on the UNIX box for the jar files I went a different route.
I use UTL_HTTP.BEGIN_REQUEST to call a URL then load I load the data to a table as a CLOB since we have more than 4000 characters. Now I need to parse the XML and load it into a form. I have never done this so if there is a helpful site please let me know. I have looked at several sites but none do what I want.
Thanks

Calling web service from oracle forms fails with ORA_JAVA.JAVA_ERROR

Problem Description:
I'm following the steps as per the doc:
http://www.oracle.com/technology/products/forms/htdocs/10gr2/howto/webservicefromforms/ws_10_1_3_from_forms.html
to create a java stub to call external web service and then use java importer in oracle forms to call this web service from oracle forms.
WSDL for external web service used is http://www.webservicex.net/CurrencyConverter.asmx?wsdl
Calling the web service using JDeveloper works fine but from Oracle Forms returns ORA_JAVA.JAVA_ERROR; Unable to call out to Java, Invalid object type for argument 1
The code from oracle form to call web service is as below:
DECLARE
jo ora_java.jobject;
rv ora_java.jobject;
ex ora_java.jobject;
outString varchar2(2000);
BEGIN
jo:= CurrencyConvertorStub.new;
--This will get the exchange rate from US Dollars to UK Sterling.
rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD');
message (float_.floatValue(RV));
EXCEPTION
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
WHEN ORA_JAVA.EXCEPTION_THROWN then
ex := ORA_JAVA.LAST_EXCEPTION;
outString := Exception_.toString(ex);
message(outString);
END;
Any help/ideas on this is greatly appreciated. Thanks.

Yes, it is the message line - so basically this call fails => rv:= CurrencyConvertorStub.ConversionRate(jo,'CAD','USD'); and control goes in the exception block
WHEN ORA_JAVA.JAVA_ERROR then
message('Unable to call out to Java, ' ||ORA_JAVA.LAST_ERROR);
Below is the code from java stub that was generated using JDeveloper by using web services stub/skeleton and associating the WSDL
public Double ConversionRate(String FromCurrency, String ToCurrency) throws Exception
URL endpointURL = new URL(endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
String wrappingName = "ConversionRate";
String targetNamespace = "http://www.webserviceX.NET/";
Vector requestData = new Vector();
requestData.add(new Object[] {"FromCurrency", FromCurrency});
requestData.add(new Object[] {"ToCurrency", ToCurrency});
requestBodyEntries.addElement(toElement(wrappingName, targetNamespace, requestData));
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.setSOAPTransport(m_httpConnection);
msg.send(endpointURL, "http://www.webserviceX.NET/ConversionRate", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
Vector responseData = responseBody.getBodyEntries();
return (Double)fromElement((Element)responseData.elementAt(0), java.lang.Double.class);
}

Cisco 69xx missed calls as service URL at feature button

Similar Messages

Maybe you are looking for