Cisco 7600 Series can't back up it's config using Ciscoworks

We have a problem with Ciscoworks. Our client's Cisco 7600 can't back up it's configuration with Ciscoworks, while the rest of the devices can. They are all enrolled and discovered in the Ciscoworks of our client. Do you have any idea how to troubleshoot this? Thanks!

Have you partitioned the drive and formatted it Mac OS Extended (Journaled?) If not, try that and see if it helps:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.

Similar Messages

Cisco 7600 Series Ethernet Services cards types & queue values

Hello,
There is different types for the Cisco 7600 Series Ethernet Services cards.
( More expensive cards with high queue values and less expensive cards with
low queue values.)
http://www.cisco.com/en/US/prod/collateral/routers/ps368/data_sheet_c78-549419.html
Hardware queues
ES Plus XT 40G line cards
• 128,000 ingress queues
• 256,000 egress queues
ES Plus XT 20G line cards
*• 64,000 ingress queues*
• 128,000 egress queues
Hierarchical QoS (H-QoS)
http://www.cisco.com/en/US/prod/collateral/routers/ps368/data_sheet_c78-570730.html
Hardware queues
Cisco 7600 Series ES Plus Transport 40G and 20G Line Cards
*Supporting up to 16 level 4 queues per physical port*
Hierarchical QoS (H-QoS)
Low queue cards have got only 4 queues per physical port. High queue cards
have got minimum 64.000 queue. This is very huge difference. In what kind
of scenario do we have to use the High queue cards ? Could you give some
examples please ? Kind Regards.
Burak

HI Burak,
Each time you configure a class with bandwidth allocation or shaping,.. a queue will be used so if you use such card to provide QoS for a lot of subscribers sharing the same interface, you will need a lot of them !!
HTH
Laurent.

Cisco 7600 Series (7603) Router Information

Hello,
Does anyone have a link or reference to a good description of the Cisco 7600 boot process and various memory heirarchy functions? I'm looking for information on what should be in NVRAM, FLASH, SUP-BOOTFLASH etc. Thank you.

You can find all the 7600 series router info here.
http://www.cisco.com/en/US/products/hw/routers/ps368/products_data_sheet0900aecd801c5cab.html
http://www.cisco.com/en/US/products/hw/routers/ps368/prod_literature.html
HTH,
Sundar

How can I back up photos from iPhoto using terminal?

Can I backup my photos from iPhoto using terminal or any other way(to a portable hard drive) as I have turned my laptop on and it has came to a screen giving me the option to back up from time machine, reinstall IOS or clean my drives, but neither are working so I believe I am going to have to erase my whole hard drive and potentially get a new one, but my only problem is that I haven't backed up my iPhoto images before so is there anyway I can do this?

You are booted from Recovery Drive. Have you tried restarting so you boot normally?
See these articles for using terminal to move
http://apple.stackexchange.com/questions/80316/how-can-i-use-terminal-to-copy-al l-files-of-a-certain-type-from-a-failing-hard-d
http://macmost.com/using-terminal-to-copy-files.html
How do I move my Home folder to a separate hard drive using terminal.ff

IP SLA/Ethernet OAM on Cisco 7600 Series

Not sure if this is the appropriate place to post this discussion, so I appologize in advance if it is not.
I'm looking for iformation if CFM Local Maintenance End Point configured on Cisco 7606 router is able to respond to the Y.1731 Performance Monitoring (DMM/DMR ).
I know I can use IP SLA to configure Y.1731 PM measurements, but I just need a reflector that will answer for incoming DMM messages with DMRs.
Thanks

Not sure if this is the appropriate place to post this discussion, so I appologize in advance if it is not.
I'm looking for iformation if CFM Local Maintenance End Point configured on Cisco 7606 router is able to respond to the Y.1731 Performance Monitoring (DMM/DMR ).
I know I can use IP SLA to configure Y.1731 PM measurements, but I just need a reflector that will answer for incoming DMM messages with DMRs.
Thanks

Downloaded new 9.0 version. . . it's really awful to look at. Is there any way that I can go back to what I was using before? I feel like my desktop is in the 1980's...please help =) Thanks!!

I was prompted to download the "latest version of Firefox 9.0" and I did it. . . It's awful though.
The tabs are different - like an old style (perhaps from 1980) Even the color looks different - a lighter baby blue.
Ghads. . I would LOVE to go back to the previous look. . . may consider using something other than Firefox. . I really can't stand this look!

Can you attach a screenshot to explain what you do not like?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
*https://support.mozilla.com/kb/common-questions-after-updating-firefox

Can I back up to icloud without using wi-fi as the wi-fi option on my iphone is greyed out and won't turn on

I have an appointment with Apple store later this week and want to be able to back up my phone to icloud before I go. Can this be done without using wi-fi. If it can, how do I do it?

Thanks Diesel, I've tried connecting 2 iTunes & selecting backup 2 iCloud but it will only back up to computer.
I've tried going into settings & restrictions 2 change settings there (as a google search suggested) but I can't remember password so it won't let me in to it. Do u have any other suggestions or any idea what I can do 2 get in restrictions without password?
Thanks

HT201250 can I back up two different Macs using time machine to the same external hard drive?

I have a MacBook Pro and a Intel Power Mac Tower. The Power Mac is backed up to a 4 TB external hard drive using Time Machine. Can I also back up the MacBook Pro to the same 4TB hard drive using its time machine without altering any of the Power Macs backed up files on the 4TB hard drive?
Ed

Yes, as long as the backup drive is large enough.

How can I back up with Time Machine using an Airport Express on LaCie D2 NAS

I want to use Time Machine through my Airport Express to back up my computer onto my LaCie D2 NAS. But curently when I "choose a drive" in Time Machine it finds my Airport Express and says there is nothing there.

Disks You Can Use

How can I back up only selected files using Time Machine?

I'm a graphic designer, I use a number of Time Capsules to periodically back up my entire computer. But I also want to set up another Time Capsule (bus powered external hard drive) that will continually run as I work and only back up a single folder and all it's sub folders - in this case a folder called 'Client Files'.
QUESTION: How do I use Time Machine to back up only my 'Client Files' folder and all it's sub folders?

Frankly, this is probably not worth the time and trouble that it will take to set it up.
Time Machine backs up your entire Mac by default.
Time Machine Preferences / Options gives you the ability to Exclude items from backup, so to do what you want, you basically will have to Exclude everything else on the Mac from being backed up. That is going to be quite a task depending on where your Client Files folder resides and you have your Finder files set up.
It will not be that difficult to Exclude major folders..... things like Applicatons, Pictures, Music, Documents, etc.....but to get to the point where you want may not be that easy.
Take a look at things by opening Time Machine Preferences, then click on Options
Since you will be adding items to be Excluded, you would need to click the + button at the bottom of the window and then navigate to find the general folder that you want to Exclude.
Unfortunately, you cannot simply tell Time Machine to only back up the items that you want.....you have to tell Time Machine what NOT to back up.....which is going to be most of your Mac.
And.....whatever you set up in Time Machine /Options to be Excluded will apply to all backups to all Time Capsules. You cannot specify what is Excluded on one Time Capsule and not another. It's all or nothing. Not what you want to do, I am sure.
Good luck

How can I back up my new iPhone using the old back up from iPhone 4

How can I restore my iPhone 4 backup to my iphone5 as I have start my iPhone 5 as a new device . I wish to restore from my iPhone 4 backup as there is a lot of photo inside .

Navigate to Settings > General > Software Update and install any updates available.
Navigate to Settings > General > Reset > Erase all contents and settings on the device you want to restore.
When this completes and the Set-Up Assistant starts, choose "Restore from iCloud Backup" and enter your iCloud account and password. You will see the three most recent backups for each of the devices on which you enabled Backup. Choose which backup to restore from.

Can't back up my Iphone5 to my macbook pro, it tells me it may be corrupted, also I don't know how to delete the old backup to redo it

Can't back up my Iphone5 to my macbook pro, it tells me it may be corrupted, also I don't know how to delete the old backup to redo it

Hi Caveman337,
Welcome to the Support Communities! The resource below will explain how to delete an old iTunes backup. Before you do this, I would suggest creating an iCloud backup of your iPhone.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
http://support.apple.com/en-us/HT203977
Back up using iCloud
If you're using iCloud, it can automatically back up your content. Use these steps to turn on iCloud Backup:
Tap Settings > iCloud > Backup. If you're using iOS 7 or earlier, tap Settings > iCloud > Storage & Backup.
Tap iCloud Backup to turn it on.
Tap Back Up Now.
After you turn on iCloud Backup, iCloud will back up your content automatically. You can return to this screen to see when the last back up happened.
Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support
http://support.apple.com/en-us/ht4946
Where your backups are stored
The folder where your backup data is stored depends on your computer's operating system. Make sure the backup folder is included in your data-backup routine. iTunes places the backup files in these places:
Mac: ~/Library/Application Support/MobileSync/Backup/
The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
Delete a backup
If you want to delete a backup created by iTunes:
Open iTunes Preferences:
Mac: Choose iTunes > Preferences.
Windows: Choose Edit > Preferences. Learn how to turn on menus in Windows 7 and 8.
Click Devices. (The iOS device doesn't need to be connected.)
iTunes will show the phone number, International Mobile Equipment Identity (IMEI) number, and serial number of the backed up iPhone when you position your mouse pointer over a backup. (Only the serial number will be shown for iPad and iPod touch). You can use this to find the backup you want to delete.
Select the backup you want to remove.
Click Delete Backup.
When prompted, confirm that you want to remove the selected backup by clicking Delete Backup.
Click OK to close the iTunes Preferences Window.
Backups that have a date and time stamp in the backup name are copies of backups created by restoring the iOS device. The date and time in the left column are when the restore-from-backup occurred. The date and time in the right column are the last synced date; this shows how current the data is.
I hope this information helps ....
- Judy

Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series routers

Dear all,
Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series router?.It is not a leased line.
Which Router model is best for 40 Mbps DSL Broad band termination ?
Thanks&Regards
Ajay Jose K

Hi ,
Below link provides you all model in 800 series .
http://www.cisco.com/c/en/us/support/routers/800-series-routers/tsd-products-support-series-home.html
For your requirement below model should suffice .
Complete throughput from the router is 51 Mbps .
Cisco C891FW Integrated Services Router
HTH
Sandy

Can I use Sandisk Compact 4GB Flash card on Cisco 2800 series Routers

Can I use Sandisk Compact 4GB Flash card on Cisco 2800 series Routers

Yes can confirm the Sandisk Compact 4GB Flash Card works in 2800 series, the exact card above...
Initially I attempted to shrink the partition on the card to a 2GB FAT partition using the steps here http://timescience.wordpress.com/2010/08/09/how-to-downsize-a-4gb-compact-flash-card-to-2gb/
However when I inserted it into the router and tried a directory list it wouldn't have a bar of it...
*Jun 23 14:11:01.391: %FILESYS-5-CF: CompactFlash insertedrtrvoip#dir flash:%Error opening flash:/ (Invalid DOS media or no media in slot)rtrvoip#format flash:
So I ended up running a format flash and voila, 4GB of flash memory no problems...
rtrvoip#format flash:Format operation may take a while. Continue? [confirm]Format operation will destroy all data in "flash:". Continue? [confirm]Writing Monlib sectors....Monlib write completeFormat: All system sectors written. OK...Format: Total sectors in formatted partition: 7812945Format: Total bytes in formatted partition: 4000227840Format: Operation completed successfully.Format of flash: completertrvoip#dir flash:Directory of flash:/No files in directory3999793152 bytes total (3999793152 bytes free)

Creating VLAN on Cisco 3800 Series

Hello
I am new to networking. We have a Cisco 3800 series router with 64 ports. We have connected servers and PC's directly to the back of the router. Almost all of the ports are used with the exception of few. We would like to create a VLAN for the remaining few ports. I am able to telnet to the router or connect directly using hyper terminal.
I have been told that we cannot create VLAN's directly on the router. For that purpose we need to first get a switch and connect the switch to the router, then create VLAN’s using the switch. Can someone please provide some tips? Any suggestions would be nice…Thanks

Appreciate you getting back. Here is the "show vlan-switch" output
----------------------->
#show vlan-switch
VLAN Name                             Status    Ports
1    default                          active
1002 fddi-default                     active
1003 token-ring-default               active
1004 fddinet-default                  active
1005 trnet-default                    active
VLAN Type SAID       MTU   Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
1    enet 100001     1500 -      -      -        -    -        1002   1003
1002 fddi 101002     1500 -      -      -        -    -        1      1003
1003 tr    101003     1500 1005   0      -        -    srb      1      1002
1004 fdnet 101004     1500 -      -      1        ibm -        0      0
1005 trnet 101005     1500 -      -      1        ibm -        0      0
---------------------->
As before I do not see any VLAN's set up. How come all the ports are not showing up on default VLAN 1. Maybe I can create a new VLAN and assign 2 or 3 ports to it. Please advise...Thanks

Cisco 7600 Series can't back up it's config using Ciscoworks

Similar Messages

Maybe you are looking for