Cisco 7921 - Spectrum management is not enabled/supported by AP.

Hi all :)
I get the following alarm from the site survey on a 7921.
Spectrum management is not enabled/supported by AP.
Can anyone tell me what this means?
Also, when you are walking around doing a site survey, what is the CU?
Many thx indeed,
Ken

This is referring to 802.11h when using 5 GHz.
I assume this is the Cisco Unified Wireless LAN Controller?
If so, check to ensure that Channel Announcement and Channel Quiet Mode are enabled
See page 44 in the 7921G Deployment Guide @ http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/6_0/english/deployment/guide/7921dply.pdf')">http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/6_0/english/deployment/guide/7921dply.pdf.
CU stands for Channel Utilization, which is based on QBSS information provided by the AP to inform the client how busy the channel is.

Similar Messages

Error: Suite Color Management is not enabled | Bridge CS6

When i go to Edit > Creative Suite Colour Settings in Adobe Bridge, I am receiving the following error: "Suite Colour Management is not enabled. Suite Colour Management requires that a qualifying product has been launched at least once to enable this feature. Then I searched this issue in Google and I got a solution from the link http://helpx.adobe.com/creative-suite/kb/error-suite-color-management-enabled.html . I did all instructions one by one but my issue still not resolved. i purchased this license very recently From Al suwaidi computers
Photoshop version is : Photoshop CS6 .kindly help me to resolve this issue

Hi Curt ,
I have already purchased adobe Photoshop cs6 13.0 MLP AOO License and illustrator CS6 13.0 MLP AOO License (i have selected to install all packages along with this ). i did all set up as per the instructions that post by adobe http://helpx.adobe.com/creative-suite/kb/error-suite-color-management- enabled.html but still i cannot access creative suite color settings it says the same message ..
" Suite Color Management is not enabled. Suite Color Management requires that a qualifying product has been launched at least once to enable this feature "
Info:-
I am using a Z820 workstation with NVidia graphics but it not showing any hardware related errors
Regards,
Sangeeth Sagar,

Suite Color Management is not enabled in PS CS5.

Hi everybody,
Here I am getting a problem that Suite Color Management is not enabled in PS CS5, I want to give you the details of my operating System: My OS contains XP-SP2, and my system is having very less RAM too and here my Photoshop Application is not a full suite.Is it compulsory that Photoshop should have complete suite. So my question is how to enable Color management in Bridge. And I am a home learner.So please help me out from this issue.If you want any more details please send mail.Then Surely I will give

You asked this yesterday and received a full answer. I'm not going to type it again.
https://forums.adobe.com/thread/1494939

Suite Color Management is not enabled in PS cs 6 ?

Suite Color Management is not enabled in PS cs 6 ?

If you have only Photoshop, not a full suite, you get this message as a matter of routine. It doesn't matter, no action required. Color management in the application is fully enabled, with your settings there.
What it means is that you can use Bridge to synchronize color settings across all applications in a suite. This isn't something you have to do (I have them deliberately un-synchronized).

Suite color management is not enabled

I have Creative suite CS4 production premium. I have downloaded the trial version of InDesign. When I open InDesign go to open/ browse in bridge then in bridge edit/Creative suite color settings I get the following error message.
Suite color management not enabled.
Suite color management requires that a qualifying product has been launched at least once to enable this feature
I get the same error if I launch bridge fro PS. I have anther machine that does not have the trial of InDesign installed and the color settings work as they should. I am assuming this problem is a result of the trial version of InDesign. Can anyone confirm this and is there a work around to fix the problem?

98cam wrote:
I have the Adobe Photoshop CS4 isn't this considered a Suite? If you read this I Would appreciate your advice.
The "Creative Suites (CS)" are bundles of individual applications, bought and installed as a package.
The applications, when bought individually, are still given the designation CS.
The synchronisation of colour management cannot be acheived with single applications. Under what circumstances are you seeing this message?

Cisco Unified Operation Manager: can not see the Campus manager

Dear all,
I have installed the CUOM to manage my IPT system. I have successfully installed without any errors. The system now can detect all IPT system components but I have a problem. From the Tool on Service Level View, I only the option for Alert History and can not see the option for Campus manager to customize the topology (like the tool on Ciscoworks LMS).
Please give me some advices.
Thank you,
Thanh

On the administration page, you will be able to see "View Reports For" header on the top.
Under that header you will see the following fields:
User ID/Type/Last/Status/Folder /Instance
Above values will be used by PeopleSoft to filter and display the list of reports
If the user has selected Status as Processing and saved the page, PeopleSoft will only show reports which are in Processing status.
If user runs a report and it has been posted, it will not show up in report manager coz the filter value is set to Processing.
Hope this helps. I dont think Permissions has anything to do with this since user is able to view the page.

Adobe extension show in the Extension Manager and are enabled but do not appear at all in Photoshop CC 2014.

Adobe extensions show in the Extension Manager and are enabled but do not appear at all in Photoshop CC 2014. Third party extensions do show up and can be used. All extensions are available in and can be used Photoshop CC. I have reinstalled CC and Extension Manager to the most recent releases and the Adobe extensions are still not available in Photoshop CC 2014. What should I do now?

Flash based extensions are not supported by PS CC 2014 anymore. Please refer to http://blogs.adobe.com/photoshopdotcom/2014/04/photoshop-spring-cleaning.html, http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
And http://blogs.adobe.com/crawlspace/2014/06/2014-release-of-photoshop-cc-faq.html#plugins (scroll down to "Why don’t my 3rd Panels show up in the 2014 release of Photoshop CC? What happened to Oil Paint, Mini-Bridge & Kuler?”)
There is a new Kuler HTML5 panel available on Add Ons: http://adobe.ly/UgxQSN
Adobe is working on HTML based version of Adobe Watermark, eMailer, etc.
If some extensions are must have for you, you have to continue to use PS CC until HTML based counterparts become available.

Support mobile wireless handsets on UC320, such as Cisco 7921/5?

The UC320 is great, a major improvement over the UC 520. Can you talk about any plans to support mobile wireless handsets like the Cisco 7921 or 7925 on the UC320 so employees can be reached via local WiFi while walking around.
Also will the UC320 someday support a WiFi connection to the AP541N Wireless LAN Access Point? Thanks.

The indecision Paul talks about in respect of the UC320W is in sharp relief to the Cisco OnPlus Agent and Service where there is community consultation on roadmap development and rapid delivery of these features. I can only think Matthew is right and that Cisco thinks the features requested for the UC320W will bastardise their UC540/560 market. At the lower end of that market they are probably right. However, in my country a recent government report stated that 97 percent of all business enterprises employee less 19 people or less. These enterpises employ around 80 percent of the working population. By nature of their size these businesses simply cannot afford the UC500 range of products. It is a huge market for a product of the UC320W's ilk but these business will not be fobbed off with a product like the current UC320W with a very limited range of features.
Right now the indecision in how this product is to develop means we do not sell it, albeit we believe it has great potential. However, we can't sell potential without a defined and commited roadmap and commitment from Cisco to the product. If not that, then please put us all out of our misery and EOL the UC320W.
Does the recently released SPA302D DECT handset have potential to be a DECT solution for the UC320W?
Regards
Stephen

Movement type 647 does not currently support serial numbers management

we can't do "shipment start/PGI for DOWN shipment 1178184 DN# 40309339.
Error message " Movement type 647 does not currently support serial numbers management" see also attachment
Error is like that
Stop : Save Shipment
Stop : Shipment 0001178184 :Action for Shipment start
Read Activities profile ZPGI
Main issue
Stop: Movement type 647 does not currentely support serial number management.
Delivery 001114455 in shipment could not be posted GI
Ssome problem with the movement type 647.
what I understand is, its a SD movement which place the material in transit and automatically executes
the 101 movement. If possible please help in this matter.
Pls help what exactly issue and resolution .
Regards
Vicky

Check this thread
[STO with delivery in 1 step (mvt. type 647) with serial numbering |STO with delivery in 1 step (mvt. type 647) with serial numbering]
thanks
G. Lakshmipathi

XA support not enable OIM

Hi All,
I have installed Oracle Database on winXp and jboss AS on the Linux.I have deployed XIMDD.war file and testing the Diagonistic Dash board with valid database details. Oracle prerequisite check is failed and the following details r displayed:-
"XA support is not enabled"
Can anyone help me how to enable xa support.
Thanks in Advance.

Did you install the oracle database with the JVM enabled?
Try this:
Run the following as sysdba
$ORACLE_HOME/javavm/initjvm.sql
$ORACLE_HOME/javavm/initxa.sql
-Kevin

Error: ORA-00439: feature not enabled: Managed Standby

Hi there, after I turned on auto archiving in the init.ora file (altered archivelog) and started up the DB, I get the error "ORA-00439: feature not enabled: Managed Standby" while starting up the instance. Under the Alert log, it said License_max_session = 0 and license_sessions_warning = 0. Is that mean I need licenses in order to turn Auto archiving on? how?
PS: I can "alter system archive log start to '...';" though when the instance is open.
Thanks,
-Harry

I couldn't agree more with Kin..
Are you running Enterprise Edition? If not, Managed Recovery Mode, is available only with the Enterprise Edition of 8.1.x. This
may be why you are getting this error. Also, check v$option and see what 'Managed Standby' option shows, TRUE or FALSE. If
FALSE and you are running Enterprise Edition, then you may want to post to the Microsoft forum regarding getting this installed.
It would also help to know what your 'compatibility' parameter is set to.
I have read numerous...views..
some syntoms:
- enabling my database mode to archivelog
However when you take out the parameter
log_archive_dest_1 parameter and added the old log_archive_dest paremeter then database opened fine.
also if you remove the word location and the
character =
it might just work.
hope this helps
shah

Movement type 317 does not currently support serial number management

Movement type 317 - support serial number management?
We are using SAP ECC 6.0. and trying to create a structured material from constituent components with the WM 317. The components are using serial numbers. When we try to post the material document we get an error message:
u201CMovement type 317 does not currently support Serial number managementu201D
Movement type 317 does not currently support serial number management
Message no. IO306
Diagnosis
With the help of * under the business operation, the entry in table T156S used here under movement type 317 defines that no serial numbers are supported here.
System Response
Termination of the transaction called up.
Is any new availability which support serial number management in warehouse movement 317?

Is the scenario relates to Retail ?? Movement Type 317 is used for Creation of a structured material from constituent components (Retail). Check Note 131969 - Recommendation: Store returns in SAP Retail Release 4.0
thanks
G. Lakshmipathi

Movement type 124 does not currently support serial number management

Movement type 124 does not currently support serial number management
when I post goods return in qa12, the system shows movement type 124 doesn't support serial number.
Could anyone can tell me where I can set the movement type for serial number?
John

Unfortunately it is impossible to post a return delivery from the usage-decision for a material with serial number profile, which is in goods receipt blocked stock. This is is missing functionality
The possibility in the standard would be the following :
1. Close the inspection lot. Please do the stock-posting in a way, that you post to 'GR blocked stock'. Remark : No physical is done. This is only necessary to achieve, that status SPCO is set.
2. Post the reutrn delivery with the MM-IM-transaction (e.g. MIGO).
Please check, if this is possible.

Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time

Record about my phone (bought in Verizon store and connected to Verizon for 4 years) has been corrupted and now I can not make any changes to my data plan. Several sessions with the technical support and management have not resolved this issue. Each time technical people and top managers promised that this issue will be resolve tomorrow and they will cal me. Nothing happend!! I can not even cancel my service not just to upgrade it. Completely locked.
Any advice?
Thanks.
Alex.

Cannot figure out what your talking about since it makes no sense.
If you are the account owner you can go to the My Verizon web portal http://www.verizonwireless.com
You must log in with your cell number and your my Verizon portal password. Not the account pin.
Once there you can change your plan and services. However repeated incorrect login attempts will lock you out of the site. It a fraud prevention measure.
1-800-922-0204 call support with your cell number and or account number and account pin and they can assist you.
If you don't have the information then there is nothing they can do.
If you can verify who you are they may be able to reset your account access. But only if you are the account owner.
Good Luck

Cisco Nexus and 10GbE Autonegotiation not supported?

Hi,
I'm currently reading through the Interfaces Config Guide for Nexus 5600 NX-OS 7.x and have found the following statement:
Autonegotiation configuration is not applicable on 10-Gigabit Ethernet ports. When autonegotiation is
configured on a 10-Gigabit port the following error message is displayed:
ERROR: Ethernet1/40: Configuration does not match the port capability
Is it true that autonegotiation is not supported for 10GbE Interfaces on Cisco Nexus? I thought autonegotation was supported by 10GbE?! So would it be best practice so set a fixed speed on all Interfaces (servers, other switches) connected to the 10GbE ports on the Nexus switches?
Thanks,
Michael

Hi Bilal,
thanks. Yes, I know that 10GbE can run over both media types, the problem here is that the documentation starts with stating that auto negotiation is not supported for 10GbE in beneral but later references only 10-GBASE-T, so I was not sure what is true - whether auto-negotiation only not works with copper or with all ports.
But I guess then it is true for all 10GbE ports, no matter what media-type. It's somewhat stange however, since I have read that auto-negotiation is generally supported for 10GbE (according to Wikipedia, at least). Maybe only Cisco doesn't supported auto-negotiation for 10GbE.
Thank you again,
Michael

Cisco 7921 - Spectrum management is not enabled/supported by AP.

Similar Messages

Maybe you are looking for